W520 over heating and nvidia quadro 2000m disabled by windows

I rencently reinstalled windows 7 on my W520 and it refuses to activate my nvidia quadro 2000m (Code 43)
For a while the fan is overheating and the right left hinge become very hot.
I think the graphic card is dead but I want to know why and if I can stop the overheating.
Is the the graphic card soldered onto the motherboard of the W520?
Thanks for your help.
P.S: Only the Intel HD graphic chipset is running ...
Solved!
Go to Solution.

After install win7 I install the driver for the wifi and the lenovo system update software. Then I run it and check if all devices are enabled. If there is someproblem I download the drivers from the website.
I already tried the nvidia optimus display driver and the the nvidia card is still disabled. I also checked if optimus is enabled on the BIOS and it is.
I used Lenovo Solution Center Lite to test the graphic cards and only the Intel HD Graphics 3000 can be tested. I got messages like "Can not send OpenCL and Direct3D command" and the result code "WVC000000-WJHZ4H" for the nvidia so the soft can not test it.
My opinion is that the nvidia is dead and I need to replace it if the it's covered by the warranty otherwise I will have to buy a new desktop to play my games and use my W520 only for programming ...
EDIT : I think my battery is almost dead, before I reinstate win7 I got a warning that battery should be changed. Can it have led to a malfunction that damaged the motherboard or the graphic card?
P.S: I made a mistake, it's not the right but the left hinge that heat ... sorry.

Similar Messages

Mac Pro 3.1 (early 2008) and nVIDIA Quadro FX5600

Hi all,
I am triying to install nVIDIA Quadro FX5600 on a Mac Pro 3.1 (early 2008).
Well, indeed I have been using this graphics card in this computer already, however, a few hours after installing the card, I updated the Mac OS, and there began the problems.
Characteristics:
-Mac Pro 3.1 (early 2008)
-2 x 2,8 GHz Quad-Core Intel Xeon
-12GB 800 MHz DDR2 FB-DIMM
Graphics cards:
-slot 1: ATI Radeon HD 2600 XT
-slot 2: nVIDIA Quadro FX5600
The story is a little bit long, however I think it is important to give the maximum information:
1-I purchased the nVIDIA Quadro FX5600, and took the computer and the card to an apple reseller to install it.
2-They installedit, physically, in slot 2, and left in slot 1 the ATI Radeon, the card included in the computer when I purchased it.
3-They told me that after installing the drivers in Mac OS 10.10.2, when restarting the computer after installing, they had kernel panic problems.
4-They installed the card in another Mac computer with Mac OS 10.9.5 to check if the card was compatible with Mac, and it worked perfectly.
5-And finally, "they say", that they repeated the same operation than in point 2 and 3, also in my computer, and this time they didn't have kernel panic problems. So I took the computer at home, ready to use my new graphics card
6-When I arrived at home, I worked about 4/5 hours with the computer, and before ending the day and closing the computer, I installed two Mac updates. One of them was a security update and the other one an iMovie update. The first one worked, however the iMovie one didn't, it gave an error. I decided to give no importance and close the app store.
7-Just after closing the app store, it appeared a message from nVidia controller, saying that there was a new update. So I install it, and once installed, it recommended to restart the computer, so I restarted.
8-When the computer restarted, before loading the Mac OS desktop, they appeared the kernel panic problems, and seconds after the computer restarted automatically again. The same thing continuosly, all the time.
9-The computer's disk is divided into two parts, Mac OS and Windows 7 professional. So I decided to erase all the content in the Mac OS part and install the OS 10.10.2 again from zero (I have a copy in time machine of all my documents).
10-Once Mac OS 10.10.2 (14C1510) installed again, I have installed the Quadro & Geforce Mac OS X driver release 343.02.02 again which is the driver compatible with the operative system.
11-The same problem has occured, when restarting the computer after installing the drivers, the same problem as in point 3 occurs again.
12-I repeated the same operation as in point 9 and 10, however, this time, before restarting the computer after installing the nVIDIA drivers, I installed the CUDA 6.5.46 driver, and the same problem has occured.
The key is that the computer has been working with this graphics card, however, the story has turned crazy...
Anyone has experienced the same problems? Any clue about it?
Many thanks in advanced!

You probably read how that 10.10.2 security update changed the build number of the OS, how Apple is still using really old Nvidia driver from 10.8.2.
So called "Security Update 2015-002" from today will purposely break nVidia drivers! ( 1 2 3)
http://forums.macrumors.com/showthread.php?t=1853748
Mixing ATI and Nvidia in older versions of Windows was a no-no.
With 10.10 I would ditch the 2600XT, it is doing nothing for you except taking up a slot.
you really just could ask and no need to drag 60 lbs and have someone else put a GPU in and attach the 6-pin aux power.
Another site along with MacIntouch to check daily and keep your eye on:
http://www.xlr8yourmac.com/
Nvidia Graphics Driver Update for OS X 10.10.2 w/Security Update 2015-002
Nvidia download page for Graphics driver 343.02.02f03 for OS X 10.10.2 (build 14C1510). Here's a clip from the main D/L page tab (other than version info typical boilerplate).
"New in Release 343.02.02f03
Graphics driver updated for OS X Yosemite 10.10.2 (14C1510) Contains performance improvements and bug fixes for a wide range of applications.
Includes NVIDIA Driver Manager preference pane."
See linked page for more info. (As of March 12th post date still links to Cuda 6.5.46 from January 28th but that could change.)

My ipada mini has over heated and its not starting

my ipada mini has over heated and its not starting

What do you mean by 'frozen' ? Have you tried a soft-reset to see if that gets it to work ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My hp compaq presario62 has been over heating and mostly shut down what can i do

my hp compaq presario62 has been over heating and mostly shut down what can i do?

You can try a usb cooling pad but I am not a big fan of them....if your laptop needs one there is a problem that needs to be fixed. The likely issue is a clogged fan and cooling system which requires disassembly and cleaning out around the fan and heatsink, removing the heatsink and appplying new thermal compound. You can also perhaps help by using compressed air blown into the heat vents.

Over heat and automaticaly shut down,

when i'm useing my notebook sometimes it over heat and automaticaly shut down,plese tell me how to fix it..

Hi NayanajithRox, welcome to the HP forums. What is the model number of your notebook? What version of Windows is installed?
How Do I Find My Notebook Model Number?
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HT4061 I got a brand new iPhone 4S on contract last week and since I've had it it's been over heating and it's turned itself off once and every now and then the screen flickers I just wanted to know is this a common thing as I've never had an iPhone befor

My new iPhone 4S that I have had a for about a week keeps over heating a lot and its turned itself off once and I couldn't turn it on for over half an hour,also my screen flickers from time to time and I'm not sure what to do as I not had an iPhone before can anybody help me please I would be very greatful.

No, it's not normal.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
Frankly though, considering it's new, take it back to Apple.

My iphone 4 is over heating and it overheated then shutoff and now it wont charge what should i do?

please help me it stopped over heating along time ago then started back up again. but now its not charging.:( even when its off it still overheats.

Hi rayeny,
Welcome to Apple Support Communities!
The article below provides tips that will help you find out if there is a hardware issue and how to setup service if there is.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Resolving Issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
-Jason

Problems with 10.8.3 and Nvidia Quadro 4000

Hi,
I have not been able to upgrade from 10.8.2 to 10.8.3 because it does not support my Nvidia Quadro 4000 for Mac. It crashes when I try to rotate an attached screen 90 degrees. It does not matter if the screen is attached to the DVI or the Display Port. Anyone else have this problem and is there a fix? I reported as a developer to Mac Developer forums with no answer and they also closed the ticket.

This problem has been solved by 10.8.4 update. So that is great news!
10.8.3 did not fix it so that is why I stayed on 10.8.2 until this latest one came out. Thanks Apple.

SL440 Over Heat and Wireless disconnect

Hi
I have a problem with Thinkpad sl440. I get these types of problem not a single laptop but also any of them.
First problem is over heat I measured overheat of the HDD by crystal disk info After one or two hours left its temp goes to 50°c.
Second one is wireless Lan Disconnect after few hours later the wireless disconnect automatically and it also doesn't show any wifi signal in his range. But after restarting the wireless lan work again. After that it goes to disconnect again after few hours.
I hope this problem occurs from over heat from the motherboard..
Please give me a solution.

Hi have a look through this Link there may be something there that may help you
http://forumhelp.dyndns.info/wireless/wirelessmenu.html
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Pavilion DV2000 Class Action Lawsuite (over heats and battery doesn't work)

Hello HP and to whom it may concern -
I was recently laid off and I had to turn in my work laptop so I pulled my HP Pavilion DV2225NR out again after it being in storage for well over a year to see if I could make some progress to get it to work again since I had some time. I have seen some information online regarding a class action lawsuite due to hardware problems. At one point, I even took my notebook back to BestBuy where I purchased it and it was returned for repairs more than once and it still never worked properly. I've invested a lot of time and effort this past week to try and get what I paid good money for several years ago to work properly. I also own a HP Pavilion desktop and wonder if it also hardware problems and that is why it doesn't seem to work properly anymore either. I'll be checking into that one as well.
All I want is a laptop that works and either that this one be repaired at no cost to me by HP or that they replace it with a comparable and working machine.
I look forward to hearing from HP as I really need equipment that I paid for to work now more than ever so that I can use it to find another job.
HP don't let me down!
Best Regards,
JB

I am sure there will be no thanks or kudos but I will try to give you some kind of an answer. The dv2000 and similar models with AMD processor were one of the largest group of defective products released onto the U.S. market, but it was in 2007 and 2008, or 5 to 6 years ago. HP issued an enhanced warranty but you had to ask that it be fixed within 2 years. It was not a recall. The problem is the nVidia video chip and nVidia was sued in a class action and offered repairs and cash damages but that closed maybe 2 years ago. The long and the short of it is all your consumer rights have expired. HP will not fix it free or provide you a new laptop. These things have time limits just like if you get hurt in a car wreck. You can't wait longer than the statute of limitations and then ask for a remedy. There are shops that will fix them for around $100 and if you are still communicating I can help you with this. We are sorry to hear of the job loss and wish you good luck. We do not work for HP we are volunteer peer-to-peer helpers.

W520, Nvidia Quadro 2000m, not certified from Autodesk till now?

Today, I had been removing the release 296.10 (newest) (http://www.nvidia.com/object/notebook-win7-winvista-64bit-296.10-whql-driver.html), and installing the driver (older): NVIDIA Driver Release 280.26 [8.17.12.8026] Verde from address:
http://usa.autodesk.com/adsk/servlet/syscert/card?siteID=123112&catID=18254205&id=18844534&product=1...
This is result:
Link to picture
Any one like this?
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

hi Alobar,
Base from your post you mentioned that you friend uses 3D max, Cad and for rendering stuff. In my experience with 3D modelling go with the Quadro. U cannot go go wrong. I do fair bit of 3d modelling on the Software MAYA. When using hardware rendering as compared to the Software rendering, Quadro Does an absolutely fantastic Job.
I hope this helps you decide on which one to pick. By the end of day it all boils down to cost vs what you're comfortable with :-)
Let me know should your require further assistance. :-)

W520, Linux Mint, and nvidia card?

I'm on a W520 with a Quadro 1000m nvidia video card, running Linux Mint 17 xfce (64-bit) Recentley, I came across a situation that required OpenGL 3.3. Best I can tell, my onboard intel card cannot support above 3.1! So I went to try and get the nvidia card working. Quick note for anyone at this point... Apparentley installing the propietary drivers directley from nvidia is the worst thing to do. I went to install the bumblbee drivers (https://wiki.ubuntu.com/Bumblebee) and have ever since been frusterated by a non working nvidia card. I've gone to the bumblebee chat, scourd the web for my issue, tried to re-install on a fresh USB.. Nothing works. Has ANYBODY else been in this situation? What were the steps you took to get a functional nvidia card? Heres an info dump of my issues. Basically, running optirun glxgears doesn't work. $ uname -a
Linux sean-ThinkPad-W520 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
$ optirun -vvv glxgears
[15874.859557] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[15874.860504] [INFO]Configured driver: nvidia
[15874.861018] [DEBUG]optirun version 3.2.1 starting...
[15874.861098] [DEBUG]Active configuration:
[15874.861134] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[15874.861172] [DEBUG] X display: :8
[15874.861207] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-304:/usr/lib32/nvidia-304
[15874.861245] [DEBUG] Socket path: /var/run/bumblebee.socket
[15874.861281] [DEBUG] Accel/display bridge: virtualgl
[15874.861318] [DEBUG] VGL Compression: proxy
[15874.861353] [DEBUG] VGLrun extra options:
[15874.861389] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[15874.898691] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[15874.898733] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[15874.898748] [DEBUG]Socket closed.
[15874.898790] [ERROR]Aborting because fallback start is disabled.
[15874.898803] [DEBUG]Killing all remaining processes.
$ dmesg | tail
[15687.546400] NVRM: rm_init_adapter(0) failed
[15754.954991] NVRM: failed to copy vbios to system memory.
[15754.956859] NVRM: RmInitAdapter failed! (0x30:0xffffffff:867)
[15754.956868] NVRM: rm_init_adapter(0) failed
[15873.990268] NVRM: failed to copy vbios to system memory.
[15873.992196] NVRM: RmInitAdapter failed! (0x30:0xffffffff:867)
[15873.992205] NVRM: rm_init_adapter(0) failed
[15885.811425] NVRM: failed to copy vbios to system memory.
[15885.813323] NVRM: RmInitAdapter failed! (0x30:0xffffffff:867)
[15885.813332] NVRM: rm_init_adapter(0) failed
$ sudo bumblebeed --debug
[16077.147754] [DEBUG]bbswitch has been detected.
[16077.147856] [INFO]Switching method 'bbswitch' is available and will be used.
[16077.147896] [DEBUG]Active configuration:
[16077.147932] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[16077.147968] [DEBUG] X display: :8
[16077.148021] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-current:/usr/lib32/nvidia-current
[16077.148062] [DEBUG] Socket path: /var/run/bumblebee.socket
[16077.148098] [DEBUG] pidfile: /var/run/bumblebeed.pid
[16077.148134] [DEBUG] xorg.conf file: /etc/bumblebee/xorg.conf.nvidia
[16077.148172] [DEBUG] xorg.conf.d dir: /etc/bumblebee/xorg.conf.d
[16077.148207] [DEBUG] ModulePath: /usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
[16077.148243] [DEBUG] GID name: bumblebee
[16077.148278] [DEBUG] Power method: auto
[16077.148314] [DEBUG] Stop X on exit: 1
[16077.148349] [DEBUG] Driver: nvidia
[16077.148383] [DEBUG] Driver module: nvidia_304
[16077.148418] [DEBUG] Card shutdown state: 1
[16077.148673] [DEBUG]Process /sbin/modprobe started, PID 5234.
[16077.148791] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[16077.152464] [DEBUG]SIGCHILD received, but wait failed with No child processes
[16077.152571] [DEBUG]Configuration test passed.
[16077.152786] [ERROR]Daemon already running, pid 2256
$ modinfo nvidia_304
filename: /lib/modules/3.13.0-24-generic/kernel/drivers/char/drm/nvidia_304.ko
alias: char-major-195-*
version: 304.117
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends:
vermagic: 3.13.0-24-generic SMP mod_unload modversions
parm: NVreg_EnableVia4x:int
parm: NVreg_EnableALiAGP:int
parm: NVreg_ReqAGPRate:int
parm: NVreg_EnableAGPSBA:int
parm: NVreg_EnableAGPFW:int
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UseVBios:int
parm: NVreg_RMEdgeIntrCheck:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_EnableMSI:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_NvAGP:int

Why are you trying to install bumblebee ? The optimus stuff is horribly designed and it's a headache in the long run. As others have suggested, use the discrete option and use either nvidia's proprietary drivers or use nouveau. Installing nvidia drivers from their site is a bad idea. Nvidia says so clearly on its website. You need to get the nvidia drivers packaged by ubuntu. You should do the following: 1) Remove the nvidia drivers that you installed manually. This could help. http://askubuntu.com/questions/206283/how-can-i-uninstall-a-nvidia-driver-completely . Make sure that nouveau isn't blacklisted. 2) Switch to the discrete option in the bios. Disable optimus detection as well in the bios. 3) Your laptop should boot normally if nouveau isn't blacklisted. 4) If you have a working system after steps 1-3 , it's not too broken. The only thing that remains is installing nvidia's propreitary drivers if you choose to. The easiest way would be to open jockey (Additional drivers) and select the nvidia driver.

Problems with Premiere CS6 and NVIDIA Quadro 4000

My system was working fine, but recently I started to get pop-up windows from the NVTransmit plug. These interrupted editing, and also encoding is taking as long as it did before I got the Quadro. NVIDIA support gave me new drivers and re-installed teh NV Transmit but nothing helped. My Premeiere CS6 is up to date at 6.0.2. Could this recent update be causing the problem? Any other ideas, and have you had the problem?

Use nVidia driver 311.50 http://forums.adobe.com/thread/1259391

Has anyone else had any problems with their phone over heating and shutting down?

I've had my phone for less a month and I've already had issues with my iphone 4. On several occassions it has overheated and shut down. On one occasion I put the phone in the side pocket of my purse where, I also had a charger for my camera. When I removed the phone, it was hot...not warm but hot! On another occasion I was at the movies and put the phone face down on my lap, at one point i touched the phone and again it was hot. When the movie was over, and I looked at the phone it had shut down....this has happened a few times more since then. I've also had problems with the phone shutting down on it's own. I took it to my local apple store and the representative looked at my phone and ran a diagnostic check for me. He said the everything on my phone looked normal and that my phone probably needs a "breaking in" period...to give it a couple of months...He really didn't tell me much more...I don't use my phone for more than the basics...calling, texting, and some mild app use...I don't understand how I can be having these problems when I've had my phone for less than a month...The rep tried selling my the Apple insurance. He told me that through ATT I only have 30 days, and I would be better off getting this insurance. I feel very dissastisfied with the service I got. I was done with my appointment within 10 mins, I don't think the representative took the time to listen to my concerns.

Thanks for your reply, but I guess whether this was a silly question is a matter of opinion. That is the whole purpose having these forums...so that people can post their questions, silly or not. Maybe you are an Apple expert or have "techy" knowledge, but I don't. So what may be silly or stupid for you, can be completely different for a novice apple consumer like me. If you must know, I did do my research, and I did do the basic trouble shooting.All to no avail. I took my phone to the apple store, had it diagnosed and was told some very inaccurate information. I ended up going back today, and got a second opinion. This person actually took the time to talk to me and to better explain Applecare and my warranty. She also told me that there is no such thing as a "break in" period, and when there is a shutting down issue, even after a "restore" that it was better to get it replaced. Which is what she did. She replaced my phone. Obviously, the first person, by his own admission, was too tired and ready to go home to actually take the time to explain and offer other options...

Cisco C240M3 and NVIDIA Quadro 4000

I was told this week @ #vmwarepex that the C240M3 supports the quadro 4000 video card, i'm not certain, but I have yet to see anything internally to that box that would provide power required for the card.

I will move this to the Premiere Pro forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

W520 over heating and nvidia quadro 2000m disabled by windows

Similar Messages

Maybe you are looking for