W520+Win7-64, Standby Mode: MessageBox Problems ejecting...

Hello world,
I'm using a SSD in the internal harddisk slot and the original harddisk running in an ultrabay adapter. Windows is installed on the SSD. Each time I go into standby-mode and return, I see the message box "Problems eject XXXX, the device is currently in use...."
In the eventlog there are multiple messages saying
"The application \Device\HarddiskVolume2\Prog\xxxl.exe with process id 4796 stopped the removal or ejection for the device IDE\DiskST9500420AS_____________________________0003LVM1\4&8a9acb7&0&0.1.0."
followed by a
"Device action request for device 'IDE\DiskST9500420AS_____________________________0003LVM1\4&8a9acb7&0&0.1.0' was vetoed by 'STORAGE\Volume\{2483acec-a2e3-11e0-9cfe-fe3c617a851b}#0000000000100000' with veto type 6."
Has anybode an idea how to get rid of this messages?
TIA,
   Bernd

I think I have a related issue. I have a SSD with my old drive in the ultrabay also
On wake up, the kb lights flash, the mechanical hd starts to spin, and then nothing. After a couple of seconds
the process repeats. It seems like something is timing out or there is some kind of power problem because the
NVIDIA GPU is being used. I don't see a message because I have to reset by pulling power and battery.
Wakeup is fine when in the Optimus mode.
W520 4270-CTO | 2720QM | 16 GB RAM | Quadro 1000M | BIOS 1.34 | PwrMgr 3.66 | 256 SSD

Similar Messages

  • Standby mode problem

    anyone ever have this problem wit their S10 netbook where you flip the screen down and the computer goes into standby mode, but after an hour the computer boots itself up and the screen turns on? This has happened to me ever since I got my netbook and I don't know how to keep the computer from waking up. Thanks!
    Solved!
    Go to Solution.

    Hi there...Update to latest BIOS  ? and check all settings in ....
    Lenovo Energymanagement 
    sincerely KalvinKlein 
    Want more ? For further information to get the most of your S-Class machine
    Lenovo Energymanagement 
    Backup
    Windows 7 Vista XP Driver all S-Series
    Windows 7  Install
    Clean XP Install
    XP Startup
    Small WebCam Guide
    Lenovo Easy Capture
    Resolution > 1024 x 576 / 600  Works with XP Only
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Nokia 6680 Standby Mode Problem

    I cant change my Nokia 6680 Standby Mode. Its disapeard. When I go to Setting and then Standby Mode, I cant see Activate Standby Mode there anymore. Ive formated phone memroy but still I cant...Anybody has any information about this problem?

    15-Mar-2008 07:57 AM
    clairelouise73 wrote:
    Hi. I've recently been given a Nokia 6680 which I've had unlocked and started using. I've found that when I plug my charger in the phone indicates it is charging but once I pull the charger out (after various periods of time) it shows up as low battery. I have tried 2 different chargers and 2 different batteries. I am currently using an old nokia phone to charge up a battery to put in the 6680 every day. Help? Am I doing something wrong??
    Prior to it being unlocked it charged up no problem.
    If you have a new phone you need to keep it on charge for 16 hours. Once the battery is fully charged the charge indicator stops moving which would tell you that the battery is full.
    If my post has helped you please click the white star on the right

  • Which is good: ejecting or standby mode for EHD's?

    After a session at the computer, I have this dilemna: how to close down the session. At this present moment of time, I have a thunderbolt, a 2TB FW LaCie, and three Seagate [2 USB] EHD's all connected to my Mac. All the three Seagate drives have been allocated backup roles via CCC and TM.
    In this scenario, what should be the manner of my quitting a session at the computer? Will keeping the EHD's in a standby mode for prolonged periods damage them?
    Also, I would like to know what is the difference between mounting/unmounting of a drive and ejection of drive?

    somanna wrote:
    I guess I need to set my own 'protocol' in these matters.
    Indeed
    somanna wrote:
    I need to tackle my own 'temporary laziness' and take time to do these things: eject the thunderbolt drive which I use for editing videos in FCPX. [After doing an 'eject' do I have to also disconnect the power supply by pulling out the thunderbolt cable from the drive? By so doing, the CCC based backup would not take place.
    No it should go into standby without disconnecting it.
    That is correct, if it is disconnected then CCC will not backup. If you are using the same drive for editing and CCC, then you will need to test it to see if CCC will bring it backup from standby. If not, then maybe that is not a good combination of uses for one drive.
    somanna wrote:
    My LaCie has a power switch. Is it okay to directly switch it off or do I have to first click upon its desktop icon and eject it? But if I switch off its power, then will CCC automatically start up the power and at its set time backup the data on this Lacie to its concerned backup drive, a Seagate?
    No you should first Eject it before Switching it off.
    No CCC will not turn it back on.
    No
    somanna wrote:
    The 2 other Seagate drives also have got some functions to do regarding backups. These Seagate drives have no power switches. Should I just eject these drives and keep their power cables on or do I have to also have to remove their power supply cables from the drives after they are ejected.
    As with any automated backup, the drive(s) must be connected and powered on in order for the automated backup to take place.
    somanna wrote:
    Further guidance and instructions in these matters will be highly appreciated.
    While I also get a little anal about backup, I do like to save power whenever I can.
    To be honest, I would probably only use the Thunderbolt drive for editing and keep one other drive online to back it up. Then rotate the other drives in and out on a daily or weekly basis keeping them off line, off site or at least in a firesafe.
    Keep at least one or two aces up your sleeve! Heck' a single lighting strike, power surge or simple mistake could take out everything in the blink of an eye if it's all hooked together and running.

  • Problems with standby mode in Windows XP

    Every time I try to put my computer in standby mode while in Windows the entire computer shuts down. I can't even manually turn on the computer in Mac until I press the power button mulitple times. Anyone have any suggestions?

    Tony, some posters have reported that the XP drivers for the Vostro 1500 will work for the M1330.
    Vostro 1500 XP downloads
    However before installing any Sigmatel driver after an OS installation you should follow this order of driver installation:
    a. Install Dell Notebook System Software R154270 (click the + sign next to System Utilities). Restart.
    b. Next install the Intel Mobile Chipset driver 153997 (click the + sign next to Chipset). Restart.
    c. Finally re-install the Sigmatel audio driver R158235 (click the + sign next to Audio).
    Some v1500 users have reported that they had to "uninstall an unknown PCI device in Device manager first , then install the driver normally".
    Rarely there will still be a problem with the installation at this point (in XP). In those cases follow this tip from forum member rpilT2005: check in the Device Manager for a "PCI Device" with a yellow question mark next to it, under the "System Devices" grouping. Hit 'update driver' on that one, and it should find the driver.
    A previous poster was able to get his audio working by following the above instructions more or less He said that after installing the Chipset driver he next uninstalled the unknown PCI device. He let Windows look for a new driver but he said he had to point it to the folder with the driver. Then he wrote, "Xp still said that an error occurred and the device may not work properly, but it did work fine and I also don't have a yellow question mark..." I know this is confusing.
    Jim

  • My ipod nano, when it enters standby mode, pause the reproduction of music, how do I solve this problem?

    My ipod nano, when it enters standby mode, pause the reproduction of music, how do I solve this problem?

    This is usually an indication that your headphones are not plugged ALL the way in.  The white part of the headset should be flush with the body of the Nano and no silver from the headphone plug should still be seen.
    B-rock

  • Standby mode problem - iPhone 4S

    I have an iPhone 4S, 16GB, firmware 5.0.1.
    When I click on the stanby button, and the iphone goes to standby mode,
    sometimes happens that when I click the stanby button againt it doesn't works
    and is blocked with black screen.
    The phone fails to resume from standby.
    The only thing I can do is keep pressed both power and home button.

    Configure the router to do DHCP automatically, try not to hard code the ip address.
    1. Try rebooting the router.
    2. See if there's a firmware update for your router.
    Read this: http://support.apple.com/kb/TS1398

  • How to turn off processes (battery drain problems even in standby mode)?

    I have the new iPad (3) and a number of processes keep running in the background even though I have "deleted" them in the multi-task pane, i.e., I have double clicked the circle, held down each app and then hit the red dash so that no apps are running in the background.  For example, I keep getting notifications that apps need to be updated which means my iPad is checking with the app store - this is happening even though my notification center is empty. I also have a battery app that tells me 30+ processes are running even though I have no open apps. I understand that some processes must always run, but I would like to disable the unnecessary ones b/c I continue to have terrible battery performance, even in standby mode.
    As for standby battery performance, the strange thing is that sometimes my battery doesn't drain in standby at all and then other times it drains over 10% over one night. Each time there are no apps running in the background and I have no idea what is causing the inconsistent behavior, but I can only assume there must some process issue. 
    Anyone have any thoughts?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • HT1749 G5 problem on standby mode only

    When power on,only lights showed up.standby mode only

    Do you have stamina mode enabled?
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Restore Log with Standby Mode on VHDX disk problem - hotfix for SQL 2014 needed

    Restore Log with Standby Mode on Virtual VHDX disk cause a 9004 error in SQL Server 2014 ( test performed on Web edition and Standard version )
    Similar Bug for SQL 2008R2 is already registered with number hotfix
    KB2987585
    Restore operations always fail in Hyper-V R2 Server in situations ( text copied from
    KB2987585 page )
    The primary database has its transaction log file (.ldf) stored on a disk that has "Bytes per Physical Sector" set as 512 bytes.
    You take the transaction log backups of this database, and then you try to restore it by using the standby option on the secondary database.
    The secondary database transaction log file (.ldf) is located on a VHDX disk that has "Bytes per Physical Sector" set as 4,096 bytes.
    In this scenario, the restore operation fails and returns the following error message:
    Error: 9004, Severity: 16, State: 6.
    An error occurred while processing the log for database '<databasename>'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
    After this error occurs, the secondary database goes into a suspect state.
    So restore from Generation1 to Generation2 machine ( where only VHDX disk is possible ) always fails and database is not accessible.
    Please create hotfix for SQL 2014 version

    Please create hotfix for SQL 2014 version
    This is a community forum, no one of use can create a hotfix for SQL Server.
    Raise a case at Microsoft Support or create an entry at MS Connect:
    http://connect.microsoft.com/SQLServer
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • How can i extend the battery life of my iphone 4s? when i left it in standby mode when i saw in 5hours it drains to 5%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    How can i extend the battery life of my iphone 4s? when i left 50% it in standby mode when i saw in 5hours it drains to 5% i saw 45%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    I was not aware of the fact one could use ringtones as alarms, this will suffice! Although I foresee some very awkward times as the sound does not stop once I respond to the reminder (it keeps going for good five - ten seconds after I "stop" the reminder), but it's better than missing it altogether!
    Thank you very much!
    Regarding the Alarmed app, doesn't it have to be running to actually remind you?
    -Modular747: I don't know anyone who actually reads the terms of service agreement, those things are usually up to thirty, small print pages full of legal jargon. Rules, I do read - not the legal documents (also they often contradict the laws in my country, but that's a whole different story).
    I agree with you - the average customer support consultant mostly cares about keeping his job and earning his salary (don't we all?) and thus racking up completted tasks (i.e. getting rid of customers as fast as possible - in a good mood). The "threat" none the less is real, if a cell phone causes me more trouble than it is worth, I will indeed throw it away (I have done so before) - and recommend a different brand to anyone willing to listen.
    Don't get me wrong, I love Apple and I've been faithfully using and recommending their producs for twenty years now, not because of fanboyism, but because they earned it. This calendar issue, however, is like a toaster that doesn't automatically eject the toast at the set time. I see it as a major flaw and after googling around a bit I see that it's been around since at least 2007 (THAT'S SEVEN YEARS!!) so I strongly believe they are aware of this problem by now, but are choosing to ignore it for some mysterious reason and it really ****** me off.
    I will send the feedback but based on my observations I suspect the Send button is merely a cleverly disguised Delete button.

  • 7.3.2.6 crashes when coming out of standby mode

    Has anyone else seen this problem with iTunes 7.3.2.6?
    It crashes when coming out of standby mode. There is an error report I can send to Microsoft, but since it's an Apple program, I never send it.
    Using standby was OK with iTunes 7.2.

    Okay. Let's try getting a fresh one through to Roy.
    If the log has been "live" for a while, info about every crash of any description will have been being added to it (with my Morrowind crashing on a daily basis, i once found a DrWatson log on belladonna that was over a GB in size). So it'll be easier for him to work through a log with just one crash on it.
    Will run through my standard instructions just so i don't forget anything. (Sorry, I know you're up to speed on this sort of thing, no offense meant.)
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    Generate the crash, collect the crash log, and send it as an attachment to this email address: [email protected]
    In the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - the version of Windows you are using (mention service packs)
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

  • IPhone 5 battery draining after iOS 6.0.2 update even on standby mode without wifi/ 3G at all.

    My newly bought iPhone 5 was on iOS 6.0.1
    everything worked fine and i had no wifi nor battery issues at all until I upgraded it to iOS 6.0.
    i noticed some battery drainage even when i'm not using my phone at all it still drains 1-2% on standby mode with no wifi nor 3G at all in an hour,
    If i use wifi it'll drain 4-5% in a few minutes time, more serious case when i use 3G, it's literally draining in EVERY SINGLE MINUTE.

    ckuan wrote:
    Jonathan wrote:
    So my iPhone 5 always had the problem of disconnecting from the wifi signal I was on whenever the iPhone is locked.
    Per designed, Wi-Fi will disconnect in sleep mode to save battery.
    If you want Wi-Fi to stay connected even in sleep mode, plugin to a wall power socket.
    No it's not "per design". It's not supposed to disconnect when locked/in sleep mode. The whole concept of having live notifications to work when your phone is locked is the standard for smartphones. Having this feature only accessable when pluging/charging the phone is rediculous and counter-productive. But it's good to know that I'm not the only one who has this issue. I hope all our issues are solved swiftly, good luck to you all

  • Samsung Smart TV Remote and Standby Mode

    Hi All - A few months ago I got a Samsung Smart TV that came with a pretty nice remote. It really can control almost all aspects of the FiOS service, but there are a few commands I cannot figure out how to get it to send to the FiOS STB. 
    First off, when I power on the TV, the STB is still in Stanby mode. It asks for me to "Press Menu to Watch ...". I cannot figure out how to get the Samsung remote to send that command or to disable standby mode on the STB. There is no menu button on this remote that's not TV-specific. 
    Second, I can't figure out how to bring up the full guide using the remote. By pressing the "up" direction on the four-way button, I get some smaller version of a guide, but I would prefer to see the standard full screen guide. 
    Finally, is there a way to get to the On Demand and DVR menus using the Samsung remote? 
    Anway, that's the the scoop. Most other featuers (DVR, etc) work pretty well. 
    The remote I'm using is a RMCTPF1AP1 and the STB is running version 1.9.7 and build 19.45. It's a QIP7232. 
    Thanks in advance for any guidance on getting this working. 
    Dave

    I'm not sure if you are turning the STB off or if the idle timer is doing it.
    No reason to turn the STB off as it doesn't save any energy.
    So leaving it on would alleviate one issue.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Camera in standby mode...

    Hello to anyone that reads this,
    Ive a nokia 6280 and have a problem with the camera stuck in standby mode..
    Anyone got advice on how to take it off ?..
    Ive upgraded the firmware and still no joy..

    The carbon or flex might have been damaged. As adamf mentioned, better take your phone to a Nokia Service Center.

Maybe you are looking for