W530 bios setting date Security/Virtualization gray out

Hi, Guys
I have a W530, with i7 and 16G standard setup.
I want to enable HV-X and found they are marked as Disabled, and gray-out in BIOS, also date is gray-out also.
Do you know how to fix it? i7 must support virtualizaion, while time setting is gray-out, I think this is either a security issue or a BIOS bug, but I had same problem with 2013 Feb BIOS, and also update to 2014 latest BIOS, same problem here.
Any one can help?
Solved!
Go to Solution.

hmm, that is an interesting predicament. on my 3720QM with 16GB RAM, I can activate the VTd-IO and VTx capabilities. 
 is there a BIOS admin password? this is the only other reason that VTx and time settings would be greyed out.
Let me try and figure out why you are having troubles, since VT should work.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

Similar Messages

  • Set Tab Order is grayed out

    I just created a new document and want to set the "tab order", but it is grayed out.  It was there yesterday, but not now.  What did I do wrong?

    My version is 8.  Sorry, I should have said that.  Weird, one of my co-workers said to try closing it and reopening it.  Now it works.  Not sure why that worked, but I am able to set the tab order now.
    Thanks for your help.

  • Change date and time grayed out

    I'm running iPhoto 11.  I'm trying to change the date and time on some scanned in photos and the option is grayed out.  Not only that, the option is grayed out on many of my photos taken by my camera.  This is frustrating because in the chronological sort, the photos are WAY out of order.

    Hello, i don't know if you figured this out but i just had the same problem on the individual picture however, when i tried doing the "Adjust date and Time" on the Event, it worked!

  • X131e Virtualization grayed out in BIOS

    Hello,
    I have purchased my x131e from a retailer here in the United States. I understand the laptop's intended use is for eduction, however, the end user should still have access to most BIOS features.
    My issue is as follows - I am unable to change anything in the "Security" menu of the BIOS. There are no locks set on the laptop, although the BIOS requests a password to enter, and I just press "Enter", loading BIOS, accessible almost completely, except for the Security menu. What gives? How do I get full access to my computer?
    Thanks,
    theinfiniti

    ok, problem solved. Some how the TPM module was stuck in a undefined state. After forcing an enable using the bios configuration utility, and an initialize of the TPM Module from windows (tpm.msc) I needed to reboot and the bios prompted me with the question if I wanted to activate the TPM module. I accepted this and when entering the bios en looking at the system security settings was able to disable Trusted Execution Technology and this gave me the option to enable/disable the virtualization options! Took me 5 hours to get the thing working.

  • Sending Anonymous Diagnostic and Usage Data to Apple Grayed Out

    I mistakingly hit Agree, in iTunes, to send diagnostic information to Apple about my computer. I did not intend to to that. I did some research in Apple's knowledge base and found a help article telling me I could disable it by opening Console and disabling the checkmark at the bottom of the dialog window under preferences.
    I even tried right clicking on my iPhone in iTunes and selecting "Reset Warnings." However I still do not receive the window that prompts me to Agree or Disagree about sending diagnostic data. I do not want to, but cannot figure out how to change this.
    Can anyone help here?

    When something crashes you will always get a message to that effect. If you enable automatic sending of data to Apple then you won't be asked to agree or disagree about sending: it you disable it you will be. I should just send the data automatically - it's sent anonymously, and it's nothing to worry about. All this only happens when there is a crash: hopefully you're not seeing this a lot? - it should be very rare.

  • 10.8, Messages- Set my font size grayed out

    On 10.8 I can increse the font of incoming messages- but not the size of my font.
    It's microscopic. I set the window on my macbook- with it as a secondary monitor-
    and I can't read what I'm typing in Helvetica 12.
    Suggestions? I've tried setting font size in Safari, I've looked through System preferences- and of course in Messages preference.
    and btw- Apple- I think you blew it changing the name from iChat which searched great- to messages- which applies to every error message known to man and anything else. Distinctive name iChat was much easier to find info on.

    Change your background colour from Automatic to anything else and then you can change your font:

  • Delivery date grayed out in Purchase order change

    Hello,
        We have a request to change the delivery date in the PO. While I tried to update the delivery date with the fast change, it did not update due to the delivery date field is grayed out. Please let me know how to enable this field so that I can change the delivery date. This field is available to edit or enter at the time of PO creation. Once I save the PO the field will be grayed (un editable). I checked the field selection and it is set up as optional entry. So, Please let me know if there is any other way to enable this field.
    Thanks,
    Vansh

    Hi Vansh,
    Check whether 'delivery date' is an opt. entry in Selection group 'Deadline Monitoring' into costomization through path SPRO - Materials Management - Purchasing-Purchase Order - Define Screen Layout at Document Level for following field selections reference keys:
    1. AKTV (Activity key for change)
    2. ME22N (Transaction key)
    If it is not an optional field in any of them then kindly maintain it as optional entry. It will resolve your problem.
    Regards
    Deepti

  • CS2:  "Set Poster Frame" grayed out?

    I have the CS2 version of Encore. I want to set a poster frame in a timeline. I have the desired timeline open in the timeline viewer, and displayed in the timeline monitor window. Regardless of whether I have the monitor window highlighted/active or the timeline viewer window highlighted/active, when I go to the Timeline menu at the top of the screen the choice to "Set Poster Frame" is grayed out, so I can't choose it.
    Why would it be grayed out? What do I need to do in order to be able to choose it?

    Is the chapter marker for which you want to set the poster frame selected?

  • CSS Properties - Show Set Greyed/Grayed Out

    I bought the book from Adobe Dreamweaver CC and am on chapter 3 about CSS. The tutorial advises at one point to click "Show Set" on. However, on my Mac 10.8.x system the check box is greyed out. Can't toggle on or off.
    Anyone know where the problem may be?
    CSS Designer>Properties
    Thanks,
    David in Texas...

    Hi David,
    The show set checkbox is enabled only if a selector is seected .
    i.e : When you inspect i.e click a particular element in the Design Surface the CSS Designer panel would display the Computed list of properties. Notice that the Show set box would be grayed out here , because the properties dispalyed are the computed ones and do not belog to a particular selector.
    When you click on any selector in the Selectors pane , the Show set checkbox will get enabled. Jsut make sure you are not seeing the computed list of properties to have the Show Set checkbox enabled.
    Let me know if this helps..

  • Security Method is grayed out

    I need to change the Security Method on a PDF file so I can reduce the file size with file optimizer.
    The problem is the drop-down menu for Security Method (File > Properties > Security) is grayed out. Also, the button for "Change Settings" and "Show Details" are grayed out as well. Below, the Document Restructions Summary shows "Allowed" for everything listed.
    In the meantime, "PDF Optimizer" remains grayed out and I need to reduced the size of a PDF.
    Any help with this would be appreciated.
    Thanks

    You might try doing a Save As with a new name. It sounds like the file has Extended Reader rights.

  • Set Noise Print grayed out

    I imported a Quicktime file with audio and video.
    I selected a portion of the audio and went to Process, but "Set Noise Print" is grayed out.
    How can I fix this?

    Hi United18,
    You need to first open the file in the waveform editor. You cannot perform this operation in a multitrack project. Once youve opened the file in the waveform editor (you should see just the mono or stereo audio for that one piece of media) then you'd typically select an area of noise (click drag to select) and then choose process->Set Noise Print. This noise print will be used if you then reduce noise using process->Reduce Noise.
    I've found that it is good to experiment. There are some files where I've had better results just running reduce noise without a noise print, and some files where I've had fantastic results by first setting a good noise print.
    Another tip is to audition just the noise to see if you hear any stuff that you don't want removed (e.g. dialog). If you audition just the noise (click the noise only checkbox), what you hear is what will get removed. If you hear bits of dialog that you don't want removed, try adjusting the settings until you don't hear these things in the "noise only" audition.
    I hope that helps.

  • How to remove the grayed out filed

    Good Morning PS Gurus,
    With wrong company code , planning was done on one WBS. As the planning was done on that WBS, company code under assignments tab & planning element under basic data tab were grayed out.
    Is there any to remove this grayed out field.
    Many Thanks in Advance...
    Reagrds
    MM

    Delete the planing values which you have done  & than try.  This is standard behaviour.
    With Regads
    Nitin P.

  • "Turn Passcode Off" is grayed out.

    After upgrading to iOS 7 on my Ipad 3 the "Turn Passcode Off" button is grayed out. I did have an Exchange account on it, but I have since removed it. I also have an iPhone 5 on iOS 7 and I can turn off and on the passcode at will even with an Exchange account. I have reapplied the update and restored same thing. Then I completly reset it and I could turn it off and on. But as soon as I restored the passcode lock came back. Also as not "Erase Data" is also grayed out.

    Reset all Settings will work. I canceled it though before it started.
    Also if it matters I can change my passcode, just not turn it off.

  • Refresh Data icon is greyed out

    Hi All,
    When we modify an existing report and export the report back to repository, Users are not able to refresh the reports as the 'Refresh Data' Icon has grayed out.' The issue is just with WEBI reports, DESKI reports are working fine
    We are using XI 3.1
    Please let me know if any of you have some idea on this.
    Thanks,
    Naveen

    Hello Arif/ Rishit,
    The users do have the right privilege on the reports/folder.
    when they import the report from the repository directly, they are able to refresh the reports, its just that when they say File > open > *.wid they get this issue.

  • IOS 7 Erase data tab grayed out

    Hi,
    I'm trying to turn off the Erase Data function in iOS 7. The feature is grayed out on both my iPhone and iPad. Sometimes my 3 year old attempts to open a locked iPad or iPhone and I don't want my data erased if he has 10 attempts at it whilst I have my back turned.
    How do I disable this?
    Thanks in advance.
    Adrian

    I've deleted my company email exchange account and downloaded the Microsoft OWA email App from the App Store to pick up company email/calendar. This only works if your company has set up Microsoft 360
    Microsoft also have another App 'Office Mobile' which also accesses company share point drives.
    I can now switch off erase contents after 10 attempts and have increased security and used a 12 digit iphone passcode - which should be plenty strong enough. This is because I can with iphone 5S finger sensor which allows quick and easy phone access despite having such a strong passcode. 
    Using a non finger sensor forces you to use a short passcode for frequent ease of access, and data wipe is more logical

Maybe you are looking for