W530 Num Lock problems with VMWare

All,  I am having a major problem with VMWare and the W530 "Num Lock".  When I move the cursor into the VMWare window a message comes on say "NUM LOCK: ON" when I move it out of the VMWare window I see message "NUM LOCK: OFF".  I do not have any key on the keyboard to disable Num Locl.  There are utilities I can run in the SUSE VMWare image to capture the key binding and remap, but I do not have anyway of turning Num Lock on or off to capture
the key binding.
Suggestions ?
Solved!
Go to Solution.

Hello and welcome,
A couple of things you might try.  Don't know if they'll work on your W.  They do work on some other Lenovo machines.
Plug in a USB keyboard that has numlock.  Use that and see if it sticks after reboot.
Use the on-screen keyboard.  Click "options" and enable numeric keypad.  That should add a keypad and NUMLOCK key to the on-screen keyboard.  Use that.  See if it works - and if it sticks.
(Windows 7) Start -> Accessories -> Ease of Access -> On-Screen Keyboard.
A little more detail here:  http://www.beezmo.com/geezblog/?p=259
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Num lock problem - Keeps flashing

    I've got a num lock problem on my new Macbook at the moment. It keeps on flashing randomly, even when I don't use it. And when I press it when the led isn't on, it doesn't do anythin. Any ideas what might be wrong?

    I don't think it is serious enough to return it. I have problems with my num lock and caps lock keys also, but I think it is a problem with the PMU firmware. Quite a few people are having an issue, so I don't think it is a hardware problem.
    There are also people having other problems related to the PMU, such as the coloured lines at startup. I suspect we will see a firmware update at some point that can hopefully fix it.
    My advice would be try resetting your PRAM with command-option-p-r at startup (until you hear the second chime). Or resetting the PMU by turning off the 'book. disconnecting power and taking battery out, then pressing power button for 5 seconds. Then turn it all back on again and it should be ok.
    Stay away from 10.4.7 too, it's just trouble.

  • Pessimistic lock problem with Sybase

    I am having a problem with performing pessimistic lock
    using Toplink and Sybase/HSQLDB.
    Code example:
    Object o = uow.readObject(...
    uow.refreshAndLock(o);
    //Change o
    uow.commitAndResume();
    ==========================
    I receive an Exception:
    Local Exception Stack:
    Exception [TOPLINK-4002] (OracleAS TopLink - 10g (9.0.4.2) (Build 040311)): oracle.toplink.exceptions.DatabaseException
    Exception Description: java.sql.SQLException: Unexpected token: FOR in statement [SELECT t0.CLASSIDENTIFIER, t0.DB_VERSION, t0.OBJECTID, t1.OBJECTID, t1.NAME, t1.DESCRIPTION, t1.TYPE, t2.OBJECTID, t2.MULTIPLE_SERVERS_POLICY, t2.OUTAGE_POLICY, t2.INCOMING_SCRIPT, t2.OUTGOING_SCRIPT, t2.OUTAGE_SCRIPT FROM ROOT t0, LDAPSERVICE t2, SERVICE t1 WHERE ((t0.OBJECTID = 252) AND (((t2.OBJECTID = t0.OBJECTID) AND (t1.OBJECTID = t0.OBJECTID)) AND (t0.CLASSIDENTIFIER = 'ORM.LdapService'))) [b]FOR UPDATE OF * NOWAIT]
    =================
    As you can see Toplink is trying to execute illegal statement : "....FOR UPDATE OF * NOWAIT"
    Do you have any idea what I'm doing wrong?

    Duplicate posting Pessimistic lock problem with Sybase

  • MacBook Pro (Retina, Mid 2012) - Boot Camp/Win 7 - Num Lock Problem

    Hey,
    I have a client who has a MacBook Pro (Retina, Mid 2012) who is experiencing a problem when booted into Windows 7 via Boot Camp in that he cannot type certain character like # (hash character by keystroke alt + 3) without Windows 7 error bleeping at him. He needs the # character as part of his password for logging into webmail.
    The Boot Camp setup has the latest Boot Camp drivers installed (this was a fresh Boot Camp setup/install today) and every other part of the hardware works I suspect that this problem is not a key mapping problem but more something to do with Windows registering Num Lock as being active.
    If the problem is that Num Lock is enabled then what is the keystroke to disable Num Lock? I thought it was fn + 6 but did this change since the Unibody MacBooks?
    I understand that there are ways of resurrecting number pad fuctionality as decribed in the MacWorld article (see link below) but this is a Mac OS X System Preference and as such would not operate when booted into Windows via Boot Camp.
    http://www.macworld.com/article/1142609/ressurect_numberpad.html
    Any advice will be greatly appreciated.

    You have Graphics card problem.
    Take it in Hardware problem:
    Genius reservation http://www.apple.com/retail/geniusbar/
    on-line https://getsupport.apple.com/GetproductgroupList.action
    check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do
    see if this applies http://appleinsider.com/articles/12/11/13/some-15-retina-macbook-pro-users-compl ain-of-graphics-issues-after-efi-update

  • Num Lock problem after windows7

    Hello
    since the installation of windows 7 home premium on my HP Pavillion dv9040ea Notebook, it is not possible anymore to use the numbers of the Number Block together with the letters on the Main Keyboard block. It means: when I want to type numbers with the help of the number block on the right side, I need to press the button NUM to switch it on. Then the numbers there work. BUT therefore, the letters of the main keyboard block do not work! ( I live in Germany by the way and use German ). There are some letters where when I press them there does not appear this letter but a number on the screen. when I presse NUM again to switch it off, the letters work perfectly again but the numbers of the number block don't - there instead the page down/up etc is activated.
    How can I get it back that I can use the numbers on the right side while using the letters of the main keyboard?
    I've tried through execute OSK.exe and regedit initial keyboard indicators, no success. In BIOS I don't find any option for NUM lock.
    Thank you all!

    I don't think it is serious enough to return it. I have problems with my num lock and caps lock keys also, but I think it is a problem with the PMU firmware. Quite a few people are having an issue, so I don't think it is a hardware problem.
    There are also people having other problems related to the PMU, such as the coloured lines at startup. I suspect we will see a firmware update at some point that can hopefully fix it.
    My advice would be try resetting your PRAM with command-option-p-r at startup (until you hear the second chime). Or resetting the PMU by turning off the 'book. disconnecting power and taking battery out, then pressing power button for 5 seconds. Then turn it all back on again and it should be ok.
    Stay away from 10.4.7 too, it's just trouble.

  • Num lock problems after start

    I have just startet my HP Pavilion 500-106eo today with windows 8.1. The problem is, that num lock is off after start and restart, and bios is set correctly to on and value in H-key is 2 ( num lock on after start) I have tried to shut down fast start up and it didn't work either. I can manually set num lock on after start....Help me solve this issue, please.
    This question was solved.
    View Solution.

    Eskil4930, welcome to the forum.
    The reason that you can't change "fast startup" is because you have to click on the phrase at the top of the page "Change settings that are currently unavailable".  Once you click on it the settings that you weren't able to change will become available.  Uncheck "Turn on fast startup (recommended) and close the Control Panel and restart the computer.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Problem with vmware fusion 3.1.3 after upgrade to Lion

    Greetings,
    I have some problems with my vmware fusion 3.1.1 after my update to OS X v10.7.
    i used a MacBook pro 17'' half a year old.
    I used VMWare Fusion 3.1.3 and bootcamp to. I have make no backup bevore i upgrade.
    The path of my virtual machine couldn't be found and so the virtual maschine didn't start after this upgrade.
    I hope that i musn't reinstall my virtual Windows 7 machine.
    I'am searching for a resulution and found this:
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=display KC&externalId=1003483
    Cannot open the disk '/Users/<User Name>/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/dev/disk0s3/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on.
    But i would save the virtual machine bevor i reinstall VMWare Fusion 3.1.3.
    Have anyone a idea how i found my virtual machine.
    Greetings from Germany
    Kim

    According to: http://roaringapps.com/app:61 Version 3.1.3 has issues with Lion.  There is a 2011 beta that works better.

  • Locking problem with Postgresql

    I'm having some intermittent deadlock problems with Postgresql (7.1 and
    7.2) and Kodo 2.2.3 and 2.2.4.
    It appears to be a conflict between my JDO and my JDBC code. I reduced
    the problem section to the
    method found below.
    I am running 10 threads concurrently in this test script. Each thread
    is calling the "runQuery()" method
    below which creates a PersistenceManager, starts a transaction, runs an
    unrelated JDBC query, and
    then commits the transaction.
    The transaction is unrelated to the JDBC query, but it seems to
    interfere with it. After a random number
    of transactions, it locks up. Now that I've upgraded to 7.2 and 2.2.4,
    it doesn't seem to lock with an
    "UPDATE waiting" message like it did with 7.1 and 2.2.3, but the script
    still hangs. It's strange,
    because if I remove the superfluous Transaction "begin" and "commit", it
    runs fine.
    Any ideas on what might cause this?
    Thanks,
    -Mike
    private void runQuery() throws AppException {
    PersistenceManager pm=JDOFactory.getPersistenceManager();
    Transaction tx = pm.currentTransaction();
    tx.begin();
    tx.commit();
    Connection conn=null;
    Long listrunid=new Long (281);
    try {
    conn = JDOFactory.getConnection();
    String sql="update summaryreport set
    totalforwarded=totalforwarded+1 where listrunid=listrun.id and
    listrun.publicid=?";
    PreparedStatement stmt = conn.prepareStatement(sql);
    stmt.setLong(1, listrunid.longValue());
    _log.debug("executing: "+stmt);
    int result=stmt.executeUpdate();
    _log.debug("done executing: "+stmt);
    if (result==0) {
    _log.error("Nothing to update for id="+listrunid);
    catch (SQLException ex) {
    _log.error("SQLException: "+ex.getMessage());
    throw new AppException (ex.getMessage());
    finally {
    if (conn!=null) {
    try {conn.close();}
    catch(SQLException ex) {
    _log.warn(ex.getMessage());
    Mike Bridge

    Hi Patrick,
    You're right, that should be in a finally clause. However, my script seems
    to hang after about 10 to 30 of the 1000 iterations.
    -Mike
    Patrick Linskey wrote:
    Mike Bridge <[email protected]> writes:
    Hi-
    Here's a standalone program that shows the problem. If you remove the
    "tx.begin()" and "tx.commit()" lines,
    it seems to work fine. With them, I get some odd NullPointerExceptions at
    the start, then later it hangs.FTR, it looks like the hang is caused by the bit where threadDone() is
    only invoked when an exception is not thrown. If you move the
    threadDone() invocation to a finally clause, the hang will probably go
    away.
    -Mike
    import java.util.*;
    import javax.jdo.*;
    import java.sql.*;
    import com.solarmetric.kodo.impl.jdbc.*;
    * create table testtable (id INT, value INT);
    * insert into testtable(id, value) VALUES (1,0);
    public class ConcurrentTest {
    private static JDBCPersistenceManagerFactory factory = null;
    public boolean threadsaredone=false;
    public int iterations=0;
    public int threadsdone=0;
    public static Connection getConnection() throws SQLException {
    javax.sql.DataSource ds = (javax.sql.DataSource)
    factory.getConnectionFactory();
    return ds.getConnection ();
    public static PersistenceManager getPersistenceManager () {
    return factory.getPersistenceManager ();
    static {
    factory = new JDBCPersistenceManagerFactory ();
    factory.setNontransactionalRead (true);
    factory.setRetainValues (true);
    factory.setOptimistic (true);
    private void runQuery() {
    PersistenceManager pm=getPersistenceManager();
    Transaction tx = pm.currentTransaction();
    tx.begin();
    Connection conn=null;
    PreparedStatement stmt=null;
    int id=1;
    try {
    conn = getConnection();
    if (conn==null) {
    System.out.println("Connection is null");
    System.exit(1);
    String sql="update testtable set value=value+1 where id=?";
    stmt= conn.prepareStatement(sql);
    stmt.setLong(1, id);
    // System.out.println("executing: "+stmt);
    int result=stmt.executeUpdate();
    // System.out.println("done executing: "+stmt);
    if (result==0) {
    System.out.println("Nothing to update for id="+id);
    catch (SQLException ex) {
    System.out.println("SQLException: "+ex.getMessage());
    finally {
    if (conn!=null) {
    try {conn.close();}
    catch(SQLException ex) {System.out.println(ex.getMessage());}
    if (stmt!=null) {
    try {stmt.close();}
    catch(SQLException ex) {System.out.println(ex.getMessage());}
    tx.commit();
    public synchronized void threadDone(int threadid) {
    threadsdone++;
    System.out.println("Thread "+threadid+" is done");
    public synchronized void iterationstarted() {
    iterations++;
    System.out.println(" ** Starting iteration "+iterations);
    public void launch(int maxthreads, int repperthread) {
    runQuery();
    for (int i=0; i<maxthreads; i++) {
    System.out.println("launching thread "+i);
    Thread mythread=new MyThread(this, i, repperthread);
    mythread.start();
    while ( threadsdone<maxthreads ) {
    try {
    Thread.currentThread().sleep(2000);
    catch (InterruptedException ex) {
    System.out.println("Interrupted: "+ex.getMessage());
    System.out.println("threads reported finished: "+threadsdone);
    System.out.println("DONE!");
    public static void main (String[] args) {
    int maxthreads=10;
    int repperthread=100;
    ConcurrentTest ct=new ConcurrentTest();
    ct.launch(maxthreads, repperthread);
    private class MyThread extends Thread {
    ConcurrentTest testobj;
    int threadid;
    int repetitions;
    public MyThread(ConcurrentTest testobj, int threadid, int repetitions)
    this.testobj=testobj;
    this.threadid=threadid;
    this.repetitions=repetitions;
    public void run() {
    try {
    for (int i=0; i<repetitions; i++) {
    iterationstarted();
    System.out.println(" START iteration "+i+" for thread "+threadid);
    testobj.runQuery();
    System.out.println(" FINISH iteration "+i+" for thread "+threadid);
    testobj.threadDone(threadid);
    catch (Exception ex) {
    ex.printStackTrace();
    System.out.println("ERROR: "+ex.getMessage());
    Patrick Linskey [email protected]
    SolarMetric Inc. http://www.solarmetric.com
    Mike Bridge

  • Problems with vmware module and Xorg

    Hello everybody!
    Today I wanted to install and setup Arch Linux on my computer into a VMware Virtual Machine, first steps were very nice and worked ok, but now I trying to install LXDE as a desktop I already installed xorg drivers and lxde this is my Xorg.0.log
    http://pastebin.com/f8gwbdcb
    [ 979.359] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 979.393] Initializing built-in extension MIT-SCREEN-SAVER
    [ 979.411] (EE) Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: /usr/lib/xorg/modules/drivers/vmware_drv.so: file too short
    [ 979.411] (EE) Failed to load module "vmware" (loader failed, 7)
    [ 979.411] (EE) No drivers available.
    [ 979.411] (EE)
    [ 979.411] (EE) no screens found(EE)
    [ 979.412] (EE)
    [ 979.412] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 979.413] (EE)
    If I want to see what's inside vmware_drv.so.... it's a empty file, all files under /usr/lib/xorg/modules/drivers are empty: `du *`
    4 Desktop
    0 /usr/lib/xorg/modules/drivers/ark_drv.so
    0 /usr/lib/xorg/modules/drivers/ast_drv.so
    0 /usr/lib/xorg/modules/drivers/ati_drv.so
    0 /usr/lib/xorg/modules/drivers/cirrus_alpine.so
    0 /usr/lib/xorg/modules/drivers/cirrus_drv.so
    0 /usr/lib/xorg/modules/drivers/cirrus_laguna.so
    0 /usr/lib/xorg/modules/drivers/dummy_drv.so
    0 /usr/lib/xorg/modules/drivers/fbdev_drv.so
    0 /usr/lib/xorg/modules/drivers/glint_drv.so
    0 /usr/lib/xorg/modules/drivers/i128_drv.so
    0 /usr/lib/xorg/modules/drivers/intel_drv.so
    0 /usr/lib/xorg/modules/drivers/mach64_drv.so
    0 /usr/lib/xorg/modules/drivers/mga_drv.so
    0 /usr/lib/xorg/modules/drivers/modesetting_drv.so
    0 /usr/lib/xorg/modules/drivers/neomagic_drv.so
    0 /usr/lib/xorg/modules/drivers/nouveau_drv.so
    0 /usr/lib/xorg/modules/drivers/nv_drv.so
    0 /usr/lib/xorg/modules/drivers/openchrome_drv.so
    0 /usr/lib/xorg/modules/drivers/r128_drv.so
    0 /usr/lib/xorg/modules/drivers/radeon_drv.so
    0 /usr/lib/xorg/modules/drivers/savage_drv.so
    0 /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
    0 /usr/lib/xorg/modules/drivers/sis_drv.so
    0 /usr/lib/xorg/modules/drivers/tdfx_drv.so
    0 /usr/lib/xorg/modules/drivers/trident_drv.so
    0 /usr/lib/xorg/modules/drivers/v4l_drv.so
    0 /usr/lib/xorg/modules/drivers/vesa_drv.so
    0 /usr/lib/xorg/modules/drivers/vmware_drv.so
    0 /usr/lib/xorg/modules/drivers/voodoo_drv.so
    Arch linux looks really nice, clear and simple I want to go on playing with this distro but I have problems with this issue .
    Thanks!

    Hello everybody!
    Today I wanted to install and setup Arch Linux on my computer into a VMware Virtual Machine, first steps were very nice and worked ok, but now I trying to install LXDE as a desktop I already installed xorg drivers and lxde this is my Xorg.0.log
    http://pastebin.com/f8gwbdcb
    [ 979.359] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 979.393] Initializing built-in extension MIT-SCREEN-SAVER
    [ 979.411] (EE) Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: /usr/lib/xorg/modules/drivers/vmware_drv.so: file too short
    [ 979.411] (EE) Failed to load module "vmware" (loader failed, 7)
    [ 979.411] (EE) No drivers available.
    [ 979.411] (EE)
    [ 979.411] (EE) no screens found(EE)
    [ 979.412] (EE)
    [ 979.412] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 979.413] (EE)
    If I want to see what's inside vmware_drv.so.... it's a empty file, all files under /usr/lib/xorg/modules/drivers are empty: `du *`
    4 Desktop
    0 /usr/lib/xorg/modules/drivers/ark_drv.so
    0 /usr/lib/xorg/modules/drivers/ast_drv.so
    0 /usr/lib/xorg/modules/drivers/ati_drv.so
    0 /usr/lib/xorg/modules/drivers/cirrus_alpine.so
    0 /usr/lib/xorg/modules/drivers/cirrus_drv.so
    0 /usr/lib/xorg/modules/drivers/cirrus_laguna.so
    0 /usr/lib/xorg/modules/drivers/dummy_drv.so
    0 /usr/lib/xorg/modules/drivers/fbdev_drv.so
    0 /usr/lib/xorg/modules/drivers/glint_drv.so
    0 /usr/lib/xorg/modules/drivers/i128_drv.so
    0 /usr/lib/xorg/modules/drivers/intel_drv.so
    0 /usr/lib/xorg/modules/drivers/mach64_drv.so
    0 /usr/lib/xorg/modules/drivers/mga_drv.so
    0 /usr/lib/xorg/modules/drivers/modesetting_drv.so
    0 /usr/lib/xorg/modules/drivers/neomagic_drv.so
    0 /usr/lib/xorg/modules/drivers/nouveau_drv.so
    0 /usr/lib/xorg/modules/drivers/nv_drv.so
    0 /usr/lib/xorg/modules/drivers/openchrome_drv.so
    0 /usr/lib/xorg/modules/drivers/r128_drv.so
    0 /usr/lib/xorg/modules/drivers/radeon_drv.so
    0 /usr/lib/xorg/modules/drivers/savage_drv.so
    0 /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
    0 /usr/lib/xorg/modules/drivers/sis_drv.so
    0 /usr/lib/xorg/modules/drivers/tdfx_drv.so
    0 /usr/lib/xorg/modules/drivers/trident_drv.so
    0 /usr/lib/xorg/modules/drivers/v4l_drv.so
    0 /usr/lib/xorg/modules/drivers/vesa_drv.so
    0 /usr/lib/xorg/modules/drivers/vmware_drv.so
    0 /usr/lib/xorg/modules/drivers/voodoo_drv.so
    Arch linux looks really nice, clear and simple I want to go on playing with this distro but I have problems with this issue .
    Thanks!

  • Problem with vmware server 1.0.10 and usb mounting into guest

    Hi, I really ve a serious problem here because  I ve some reason that I need to use vmware sv 1.0.10 with windows 7 64bit pro as the host and win xp pro sp3 as guest os  .... now i can installed vmware on my win 7 with pressing F8 then disble driver signature technique and I also sign vmware driver with win7 using some tool...
    However, my problem is that i cant mount USB flash drive into the guest... it just show me my flash drive's name at the toolbar>>removable device>>usb    but when i click on it.. nothing happen .. and after that when i check vmware log I've found that  my vmware saw my flashdrive normally as it should be...  i really ve no idea how to solve this....
    I also tried set .vmx config with many methods but nth can help me...
    Ps. I know that vmware server may b ve a big issue with win7 compatible things but i do really need to make this version of VM working  with my usb flashdrive... plz help me.. Thank you guys all:)))

    Hi creamac,
    Welcome to communites
    Please install vmware tool and then on vmware task bar select connect or unplug usb drive . You
    will find that on right hand corner above to task bar of host machine  .
    "Nature always wears the colors of the spirit."

  • Problem with VMWare Fusion and OS 10.6.8 and Safari

    when i try to open Safari from say a tracking number or even if i try to install an extension for safari from a download by double clicking it in my downloads folder instead of my mac version of safari opening it opens safari in vmware fusion this just started a few days ago i haven't updated anything i'm using safari 5.1 on my mac and this is a imac intel 2.8ghz intel 2 dual processor
    please help as this is causing me a lot of problems
    thanks Mike

    It's not a big concern, apparantly the assocaition what program opens that file when you click on it is off kilter.
    It's surely a VMFusion issue as they tweak things a bit in OS X as to be able to merge OSX and the guest operating together for a more seamless experience.
    Perhaps you opened the file once in Safari in VMFusion and now it has that association, or when there was a menu selection you picked the wrong one by accident.
    Register on get on the VM forums and post your question there and they can assist, it's a easy fix but it escapes me.
    I run VMFusion too and noticed this ability once when I had OS's merged, but I don't merge operating systems anymore, rather I prefer to keep each one seperate.
    Good luck, ask on VM's forums and you'll be fine.

  • Locks problems with STS

    Hi,
    I am working with BPS into BI 7.0, and its STS. The user goes to the STS web page and takes a node A and changes its status to "In process" and its brother node B is "Send to approval".
    The node A is locked; the message said "An exclusive lock was set in subplan AA planning session BB for the transaction data. For this reason, you can only display the data. ... In the case Botton up ( it is my case), set automatically when a subplan was send for approval or was approval, but the node is "in process" and that node has only one planning folder.
    Thanks for your help.
    Victoria

    Hello Victoria,
    This is a weakness of STS regarding the locking concept, that it is not able to determine on which node the user is operating.
    Once there is one lock set for a specific user, this user is not allowed to open a planning layout out of STS. (beside the auth. object R_STS_SUP)
    You can debug this yourself. You can find this in function module UPS_CHECK_LOCKS_IN_HIER.
    Greetings
    Alex

  • Portait Lock Problem with IOS 4.2.1

    Since upgrading to 4.2.1, my phone screen orientation isn't working properly. Browser, text, email, notes etc stay in portrait mode when I turn the device horizontally. With it horizontally, I have to double-tap the home key, swipe to the lock key then lock and unlock before the screen re-orientates.
    This only fixes the issue temporarily, during the time I am using the app. When I switch to another app, the same issue occurs. Furthermore, it locks the app in landscape mode (which I don't mind!)
    This is only really a pain when I want to use text input.
    This image was taken whilst my phone was in portrait mode: http://www.haizdesign.com/lock.png

    There is no legit way to downgrade.
    Have you tried basics from the manual?
    Restart.
    reset.
    Restore.
    Troubleshooting MMS:
    http://support.apple.com/kb/TS2755

  • W530 and a problem with the sound card

    Hi,
    Whenever I play a song or a tune, I experience a reoccurring glitch or a "bzzzzzt" for about half a second, before the sound gets back to normal. This seems to be totally random, and not caused by heavy usage of RAM or the processor.
    Do you think this is a hardware problem or a driver related issue?
    Any suggestions to solve this are appreciated.

    Hi, Dolve
    This could be either hardware or software, so let's start with trying to get all drivers and software up to date. This page has updates for all your system. I would recommend getting at least your latest audio driver and BIOS downloaded. Following the installation, try using your sound again and see if the issue still persists.
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Problems with VMWare Fusion after MacOS Upgrade

    Prior to upgrading yesteday I was able to use "open with" to select programs that were installed in either my Win 7 or XP VM on VMFusion.  After the upgrade no longer set any of the Win apps. This is a real pain a now i have to open Fusion, Win 7 and use the Office 2010 app to open the file.
    Has any one else had this problem? Is there something I can do to fix this?

    Hi cjpembo,
    my Card looks like:
    01:07.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
    01:07.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
    My card seems to be another version. Regarding to the v4l Wiki: http://linuxtv.org/v4lwiki/index.php/Tu … ted_Tuners
    A new Hauppauge WinTV PCI-FM card is here (pci_ids: 14f1:8800, 14f1:8811), using the TCL MFPE05-02 PAL (DK BG I) FM tuner. It just implements mk3 API, you can use philips 1216me mk3 (tuner=38) instead.
    If I don't specify any module parameters, the tuner type 0 is selected.
    ACPI: PCI interrupt for device 0000:01:07.0 disabled
    tda9887 2-0043: destroying instance
    tuner-simple 2-0061: destroying instance
    Linux video capture interface: v2.00
    cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
    ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
    cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
    cx88[0]: TV tuner type -1, Radio tuner type -1
    tuner' 2-0043: chip found @ 0x86 (cx88[0])
    tda9887 2-0043: creating new instance
    tda9887 2-0043: tda988[5/6/7] found
    tuner' 2-0061: chip found @ 0xc2 (cx88[0])
    tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
    cx88[0]: warning: unknown hauppauge model #0
    cx88[0]: hauppauge eeprom: model=0
    tuner-simple 2-0061: creating new instance
    tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
    input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
    cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
    cx88[0]/0: registered device video0 [v4l2]
    cx88[0]/0: registered device vbi0
    The card is not listed in my local PCI ID repository. And it seems, that the PCI ID is not known to the PCI ID Repository: http://pci-ids.ucw.cz/iii/?i=0070
    Badcel
    Last edited by badcel (2008-08-24 09:46:18)

Maybe you are looking for