W530 Power Jack Type

I'm replacing the power jack on my laptop and I think I may have used the wrong part. I used a NO.50.4KBE01.011, but I think the quad-core version uses a different jack-- does anyone here know the proper part number for a quad core W530? I'd be very grateful if someone could tell me, as I can't seem to find it easily online. Thanks for reading.

50.4KE09.011
http://www.ebay.com/itm/New-Orig-50-4KE09-011-DC-Power-Jack-Socket-Harness-Thinkpad-W520-W530-Flat-mout-/171805848021?pt=LH_DefaultDomain_0&hash=item28006d31d5

Similar Messages

  • ThinkPad W530 Power Jack Replacement

    Hi, I'm trying to replace the power jack in my W530 and I've run into a little problem-- I can't actually get the power jack out of the housing. I've disassembled the laptop to the point where I can replace it, but I can't actually get the jack itself out, it seems to be glued in to the extreme. Does snyone have any tips on how to get the power jack out? I already have the replacement part ready to go. Thanks in advance.

    Alright, laptop is working! However, it says the battery isn't charging-- either in the system tray or the LED indicators on the outside. However, as long as it's plugged in, I can use my laptop and the battery won't decrease. Any ideas for what the problem might be?   EDIT: Never mind, it died on me again. A little frustrating.

  • T60 power jack under warranty?

    My power jack on my t60 is acting up. The laptop beeps as though someone pulled the jack on and off as i type. It has never been dropped and has a 3 year warranty would this be covered? Thanks for any input.
    Solved!
    Go to Solution.

    yes it is covered under warranty. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • DV7-1279wm Power Jack replacement?

    hello
    i own a DV7-1279wm laptop, and the power jack is destroyed, and its out of warranty. I was wondering 2 things.
    1. is there a manual showing how to dissasemble the DV7-1279wm
    2. does anyone know the replacement part # or could find a sutable replacement. i saw this in another post
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170498079008&ssPageName=STRK
    and was wondering if this will work. thanks in advance!

    Go to the Link below, type in you model number in the search box and then hit enter, when the page loads select Manuals, there should be a manual that shows you how to disassemble the Laptop.
    http://welcome.hp.com/country/us/en/support_task.html
    It requires good soldering skills to replace the DC jack on a motherboard, there are a few models that are not soldered to the motherboard, these are much easier to replace and HP does sell this type of assembly, just not the solder type, to get a solder type you will just have to google "dc jack" and you model number of the laptop to find one that may work.

  • Hp mini 1035nr dc power jack issue

    HP Mini 1035NR DC power jack is no longer making a connection to the power tip. Voltage is consistent on the tip itself. Did not help that my wife has been using this for some time by wiggling the power plug into the DC jack on the side of the netbook and it would "eventually" make a connection. It had been steadily deteriorating over the recent months, and now I can't get a connection at all, the battery has been replaced months ago and it will hold a charge for 2-3 hours easily. But now I'm certain it's the DC power jack within the base of the unit. The power light immediately next to the DC jack no longer lights, that is what we would use as an indicator to know we "jiggled" the tip enough to make a connection.
    So my question is has anyone here popped open the unit to replace the power jack? If I pop it open will I have the ability to maybe access the connectors inside the jack to attempt bending them back into place? Must the whole jack be replaced? Is it soldered in place or possibly just a wire connector that I can easily plug/unplug? I did try looking into the jack from the outside with a strong lens and could see the metal tab for the negative voltage (external part of the power tip) connection within the DC jack but could not seem to bend it upwards when I delicately tried with a thin tweezer tip.
    Don't want to risk popping this open if when I get inside it's not easily replaced. I'm OK plugging/unplugging, but taking a soldering iron to the board is pushing the envelope. Or has anyone found a slightly fatter power tip that works in this unit from some other power brick that might get a better connection?

    It will need to be soldered if you do decide to replace it yourself. My suggestion would be to take it to a computer repair shop or contact HP support to see how much their out-of-warranty repair would be. The number if you are inside the US is 1-800-474-6836.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • DC Power Jack part number Satellite M105-S3041

    Greetings,
    My Toshiba laptop (M105-S3041) seems to be having a lot of problems with the power.
    My OEM Power adapter broke and i bought a replacement (non OEM) from ebay.
    That has been working fine till about a month ago I started having problems charging my laptop.
    I believe the power adapter is working fine (as the light on the adapter lights up) and I may be having a problem with my power jack.
    I have been searching for the model / part number for the DC Power jack without any luck. Would someone please help me out with the correct model/part number, where to buy and the approximate price for it?
    Secondly, does anyone know if the power jack is plug 'n' play or does it need to be soldered into the mother board?
    I have been pretty good at dis-assembling the laptop and putting it back together (except for one damn screw that does not agree to come off, I will probably saw that guy off).
    Thank
    Ajay

    Hi
    Im not quite sure but I think the DC-in socket is soldered to motherboard.
    In such case it would be tricky procedure in order to replace this.
    But it seems that you are not 100% sure that this part malfunctions.
    It could be also the AC adaptor issue as you said, you bought an not original part.
    Its just a suggestion but I would try to replace the AC adaptor with an Toshiba recommended one before trying to disassemble the notebook and to replace the DC-in socket.
    PS: All parts can be ordered from local Toshiba ASP!

  • Thinkpad E420s power jack issue

    I am having an issue with DC power jack in my thinkpad E420s. 
    when I plug-in charger, charging light detect the charger but when I roll over my mouce to bettery symbo, it says 'pluged in, not charging).
    Also, I tried to lookuop the part number for power jack, but this product is no longer available for lenovo, so I couldn't find information on lenovo.com.
    Can anyone please help me out with this issue.
    Thanks

    Hi Hammesh,
    The FRU number of DC in cable for E420s is 04W1756. Refer hardware maintenance manual to understand how to replace it.
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My t61 - no power after changing the power jack

    Hello guys,
    So the long story short , the power jack on my t61 wasn't working.I bought the new one , changed it today , I am pluging it -no power at all.I dont think its the charger as up until the end it was working , its here to say i havent started the laptop for about 3 months .It was a pain to start it before , i had to twist the power jack in every possible was just to make it power on.So my concern right now is whether the motherboard is dead or not.
    Please anything you have like a clue will be more that appritiated!
    Solved!
    Go to Solution.

    There isn't much required to get the power light to come on. It is possible you shorted something out. IT is possible something isn't plugged in all the way. Even if the CPU isn't in or the memory isn't seated, you would get the power light. Is it possible that all the twisting before broke the wire between the ac adapter and the machine? Can you get another power supply to try?

  • Need help fixing my power jack

    My hp hstnnc18c power jack is pushed in and I need to fix it

    Have you tried measuring the voltages of the PSU?
    http://macosx.com/forums/hardware-peripherals/298426-how-test-g5-power-supply.ht ml
    http://www.insanelymac.com/forum/lofiversion/index.php/t105113.html
    http://www.applefritter.com/node/6561

  • Replacing the DC Power jack board. HELP

    So my computer has gone kaput after a trusty 2+ years in the family (we bought it used). Based on posts I've read and my record for devouring power adapters, I'm hoping and praying the Power Jack has come loose.
    I bought the part...everywhere I go I read this is easy to replace (in comparison to logic boards, at least) but no one says how....
    My father and I have opened up towers together, but never a laptop. Could someone please give me basic instructions, or direct me to a set? I'm leaving for school in August, and if my computer isn't fixed I'll be in deep. Thanks.

    Hi, you don't say what model iBook you've got but go to:
    http://www.ifixit.com/Guide/Mac/ select your model then select DC in Board from the left hand collumn. Follow the step-by-step instructions. Definitely much easier than a logic board...
    Good luck,
    Adrian

  • MSI GT680 DC Power Jack burnt out

    soooo basically i was havin problem with the laptop struggling to recognize when the charger was plugged in and i had to adjust it into position and make sure it didnt move for it to charge...then a few weeks back i smelt something burning and smoke came out of the fan area (which meant the dc jack had burnt out)...so i ordered a new dc power jack from USA and opened the laptop up and can i say its really poor arrangement of components by MSI cos i had to take out nearly everything to get access to the jack which was stuck to the motherboard, it should really have its own wiring and seperate area if it can be burnt like this (like my dads acer does, his dc jack burnt out too but it was completely separate wiring for it so it took him 15mins to sort it out)
    aaanyways i did eventually get to the dc jack and tried to desolder it from the motherboard and it took me ages, maybe because of the solder used on the jack or maybe cos the soldering iron i had wasnt hot enough, either way i finally got it off and soldered the new jack into place and put everything back together and crossed my fingers before plugging the charger back in but there was a little spark so i took it out immediately, the circuit must have shorted somewhere or some of the components must have burnt out intially
    now i've got a dilemma in what to do...i live in the UK so parts are hard to come by and i dont think im under warranty cos i've had the laptop for more then 2 years so any suggestion how i can proceed
    P.S another guy had a similar problem which can be seen in the post below but no solution was posted at the end of it
    https://forum-en.msi.com/index.php?topic=169720.0
    thanks in advance

    Quote from: darkhawk on 08-August-13, 09:40:42
    I'll be perfectly honest with you.
    Replace the motherboard.
    Why? More than likely a FEW components have probably been damaged, most likely that you can't see. There might even be shorted traces inside the board at this point, or missing traces. So if you try to fix it, more than likely it will go up in smoke again, and possibly even worse this time.
    any idea where i can get a motherboard for MSI GT680 (preferably in uk somewhere)

  • Lenovo G550 Power Jack Broken

    Over the last week my G550's power jack has become less and less reliable and  eventually stopped charging the laptop at all.
    I've seen several discussions about this being a problem but no actual instructions or pictures on how to get access to the motherboard.
    Does anyone know anything else about this problem?
    Thanks in advance.

    To get to the power jack, you are removing most every screw on the case. Remove the panel above keyboard that houses power button, then there are more screws beneath it. Then you can get to hinges, unscrew them, find another screw at each hinge after hinge is out of the way. Also unfasten the keyboard, but don't rip it out, to find a couple more screws underneath the keyboard. And finally you can take the two halves of the case apart well enough and get in to disconnect the power jack. The DVD drive will slide out, no screws attaching it. The wiring for the power jack goes to a location by the memory where it attaches to the motherboard. I disconnected the cable by the memory and pulled it through easily.
    Should take a week for the part to arrive to me. Crossing fingers that the whole trouble is this and nothing else. Found other thread here that talks about securing the jack better: http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/G550-power-connector-is-this-a-weak-point/td-...
    Clearly there is a fault in the design of this laptop model, I think, when many people are having the same fatal issue.
    Also, now that I think of it: if you wanted to test if this was the problem for you laptop without the trouble of disassembling everything, you could easily disconnect the power jack by removing the memory cover and unplugging it there; then plug in a replacement power jack (which you'd need to order) and test. If all works, you could then go through the bother of taking everything apart (or finding someone to do it).

  • Creative Juke box Zen xtra 60gb - power jack fail

    Hi guys,
    I wonder if there is anyone out there that could help me
    I got a Creative Jukexo zen xtra 60gb, and the
    power jack is now stuck the power supply. You know the bit of metal that sticks upright and is dead centre. in the Power jack housing on the player, well that bit of metal is stuck in the end of the plug that goes directly into it.
    Has anyone experienced this problem, and would anyone know what to do if their warrenty is expired, i mean can i pay to have it fixed?
    Thanks a lot you guys.
    Ben
    (England)

    bpjones wrote:
    Hi guys,
    I wonder if there is anyone out there that could help me
    I got a Creative Jukexo zen xtra 60gb, and the
    power jack is now stuck the power supply. You know the bit of metal that sticks upright and is dead centre. in the Power jack housing on the player, well that bit of metal is stuck in the end of the plug that goes directly into it.
    Has anyone experienced this problem, and would anyone know what to do if their warrenty is expired, i mean can i pay to have it fixed?
    Thanks a lot you guys.
    Ben
    (England)
    You mean the center pin, inside the players socket? If this has come off/snapped you are a bit stuck for recharging the player via the AC adapter. You say that the Male plug (from the adapter) has the pin stuck in it's If it has then you need to contact Creative, If your player is still in warrentey you should be able to claim off it, especially if "it just broke"...
    Contact them anyway and see what they can do, you cant repair the problem yourself without taking the player apart and replacing the entire socket. And you dont particually want to do that.
    Tell me, did the pin just snap off, or did it come off another way?

  • HP mini 311 power jack problem

    When I have to recharge my HPMini311, I have a terrible time keeping the power jack charging, and the small light will more often than not disappear until I find another position, usually standing my open tablet up on its side. Any solution other than having the power jack changed?
    This question was solved.
    View Solution.

    Oldlyme.
    Does not look good.
    You would have to remove keyboard, WIFI, palmrest then the motherboard.
    The jack connector is on the underside of the motherboard.
    Not easy but it can be done.
    Sorry.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • HDX16 - power jack failure - possible to get quickdock connector?

    Bjorn <
    After a bit more than two years, my HDX16 has gotten a problem with the ordinary power jack.
    At first I thought it might be the jack itself - bought a new one and replaced the old one (compared to other HP laptops - it sure was a lot of steps to go through to get to the power jack itself...). No luck. 
    I also have an XB4 docking station - and the quickdock connector there gives power to the laptop. So, I know that at least that part of the power supply works internally.
    I'd like to be able to use the laptop more mobile than now, and have been searching the net as good as I can for getting either a charger with a quickdock connector, a quickdock adapter for an ordinary charger, or a separate quickdock contact (with a wiring diagram) - but no results yet.
    Does anyone here know if it's possible to buy any of these things?
    Regards,

    Thanks, but as I wrote - I can't charge through the ordinary DC jack on the computer. I already have four chargers - neither of them work on the computer anymore (but they do work on my work laptop).
    I bought the replacement DC jack from some firm on Ebay, can't remember which one - but he had a very good reputation there, and had been around for a few years.
    What I'm primarily looking for is some way to connect a charger to the docking connector on the left side of the laptop. The same connector that the XB4 docking station uses. You can see it on this image (http://www.hafeezcentre.pk/ads_images/1293792055_s​u83/hc130139945632.jpg)
    I would like to bring the laptop with me on travels, but I can't bring the XB4 also (that would look kind of weird on the train - setting up the XB4 and the laptop...)

Maybe you are looking for

  • Reports available for Project

    What are the seeded reports available for Reporting.Consolidation Purpose in Projects. I need following details -- 1. Report for Monthly expenses for the Projects 2. Report for Project status like whether they are closed , Approved etc and the cost a

  • IMac mid 2007 as display?

    Hi! Heard that only iMac's 2009+ work as monitors. Is there any way around this? I have an old iMac 20" mid '07 that I'd love to use as a display. Kindly, Joachim

  • Regarding DataTimestamp Issue

    Hi All, I am trying to select a date with timestamp from a table which has a column with date and timestamp. I have selected the datatype as Date and the date is coming fine but the timestamp is coming as 00:00:00. For the timestamp to to appear i ha

  • Ipod with sad face and will not stay in disk mode but hdd works

    Hi, I've got a problem with my ipod and i've tried everything to fix it and nothing works. So basically after my ipod gave me the sad face I tried putting it into disk mode and that worked successfully! However after I plugged it to my computer, it w

  • Can vendor be controlled as per PO document type ?

    Can vendor be controlled as per PO document type ? I mean vendor for stock type should not be allowed for non-stock type.