W530 sometimes do not boot / boot loop

Hey,
Since some days my W530 sometimes have some troubles at start up. It is not every time the same procedure. Often it gets in a boot loop till, after some loops, the windows repair set up trys to repair the system (but it came to a "fail" message) After that the laptop starts normaly.
Sometimes it stays in the loop since I shut down and remove battery and AC adapter. After some loops again then the repair can bee done again. If i do not repair the system it came till windows logo and the notebook shut down with an sound of "power off"(no sound out of the speakers rather a "klick") and restart to next loop... The problem appears mostly on next start after I was using my Laptop mobile.
I did an bios update without result and complete re-instalation of windows but the problems are still there. I have the illusion that after re installing windows it is a bit better(not so often) but the problem is still there. Sometimes I need 15minutes to start up windows...
I fear it will be an Hardware failure but, the hardware scans of the solution center say everything is ok.
Anyone have an Idea what I could do?
Kind regards
Solved!
Go to Solution.

Hey, Just for Update
After some random reboots in normal usage out of win 7 the w530 was completely dead. Pushing the power button results just in a short blinking of the button.
So I called the lenovo support and on next day the mainboard gets changed and everything is working again now.
Due to that it was dfinitively a hardware failure.
Very fast and good support from lenovo!
Regards

Similar Messages

Dv6000 No wireless and sometimes will not boot

Hi all i am steve from i have a DV6152EU
it has a fault of no wireless card showing up and also sometimes 3 beeps on boot
i am told it is a none issuse andcan be fix via HP on a free repair the laptop is about 18months old
i have tried a couple of number but they ask me if it is covered under warrenty then asks me if i would like to buy more warrenty then cuts me off
can anyone help thanks steve

hey everyone,i am a laptop technician from glasgow.
I am new to the HP forum's but I hope to shed some light for you guys, HP DV6000 - was one badly made laptops, main issues, wirless and NVidia g/card, ass we all know the G/card symptoms are a series of beeps upon start up, 1 long 2 short. the fix is fairly simple to those whom are brave enuff, all you need? 2 thin plates of COPPER , 1 blow torch and some processor paste basically strip the laptop down. remove the old paste on the chip marked Nvidia, clean it up real nice. use the blowtorch for about 1-2 minutes on the specific chip, front and back, place one copper strip ontop of the core on chip and the same on the other NVidia chip. but remember re-paste the chip before hand. work's everytime. as for the wirless? i have came accross this fault many of times. but for some reason not known to many the wirless card will just vanish, it is infact a startup/bios problem from the moment the power button is switched on. the wirless does infact still work, i have noticed that if you turn the laptop on, remove the wirless card and then re-slot it back on (while there is power in the laptop) it will infact start working (not advised) this is called hot plugging. i am going to check the area around the power and wirless card. to find any flaws or fault parts. ill hopefully get this fixed and as soon as i do i will let you all know.
thanks.

Tecra A4 sometimes does not boot up

Hi all!
A few months ago I dropped my Tecra A4 - silly of me, I know. The hard drive was damaged beyond repair so I bought a new one, plugged it in, and set up my notebook again, and it worked fine.
Last week, however, I went to switch it on - and it didn't. I just got the black screen BEFORE the Toshiba logo, and nothing else happened. After that, I tried reformatting, recovering, system restore, etc. and NOTHING seems to work. I can get the HD to boot up by pressing hard on the laptop, which makes me think it's a connection problem between the HDD and the motherboard, but again - no way to check.
Has anyone had any similar experience, or can offer suggestions? I'm a student so I can't really afford a new laptop.
Thanks!

Hi
In my opinion this malfunction is a result of the notebook dropping.
Who knows what can be damage. Everything looks like something wrong with the motherboard but maybe its only a little, tiny part which makes such trouble.
However, the fault can be found only by a notebook technician. Therefore I would recommend contacting the service provider in your country for an check.
By the way; did you try to remove the battery and to disconnect the AC adaptor for a while? Not? Well, I would recommend doing this.
Remove the battery, disconnect AC adaptor and wait several minutes (about 20min). Then connect everything again and try to boot the unit.
Maybe it helps.

HELP: MacPro sometimes not booting when powered up... Why?

My 3 year old Mac Pro (2.66 dual-core Intel Xeon processors) sometimes will not boot on powering up. The fans will whir like normal and the gong will sound but then nothing but a white screen... no hard drive noise... like the HD has not been triggered to boot... every time I push the power button to off... everything shuts down... then I immediately push the power button again same sequence and sounds... but this time the drive starts making its normal sounds and the machine boots properly.
I don' think it's the drive itself... but I'm wondering if it might be a drive controller that's going South.
Anyone seen anything like this happen before?

Then you have been cleaning it of dust, taking it out, making sure it isn't clogged; and probably running the fans @ 900 rpm (3 of the 4 anyway).
Could be X1900. Wait and see if 5770 is an option, otherwise the ATI 4870s work fine.
IF you can run Apple Hardware Test off your OEM DVD it came with ('D' on startup) and it is just the video card.
Might also play RAM-Riser tag and try with just one set of RAM and swapping Risers, looking for red light etc.

IPhone 5 6.1.4 newest software and endless boot loop... I restored, removed SIM, nothing worked. Help me!

Hi Everybody!
My iPhone 5 restarts every 3 minutes... Sometimes more, sometimes less. Boot loop. I restored, I removed the SIM card, I tried everything what I read on forums. The battery life goes down so quickly. I bought 5 months ago. What can I do?
Please, help me, it makes me crazy!
Thank you!
Roland

Since you've restored your iPhone already, go ahead and set up an appointment at an Apple Retail Store becuase this may be something they need to repair your iPhone for

Ipod Stuck in "boot Loop" and itunes says I'm not connected to the internet.

Aright well I'm having a huge problem fixing my ipod.    Let's start at the beginning, i wanted to put new music onto my ipod but itunes wasn't detecting my ipod, it said i have to restore my ipod to factory settings, so i manually did it from the ipod it's self.   When it started to boot up again it just froze at the apple logo. and the loading wheel is stuck. after some research i found out that its called "boot loop" and the only way to fix this is to restore it from itunes itself.
sounds simple enough, so i go ahead and connect the ipod to itunes and try to restore it (via DFU mode) The restore wont happen because it says im not connected to the Internet, when clearly i am.      So in a nutshell..   in order to restore my ipod.. i need to get itunes to recognize that I'm connected to the Internet.
I've done everything i can think of,   make sure my firewall isn't interfering and itunes is enabled. The Internet proxy is what it needs to be. Ive uninstalled and reinstalled itunes.   I actually chatted with a apple tech and he couldn't seem to help me out.
If anyone can help me or has been in this situation and know's exactly what to do.   please let me know.. it would be greatly appericated

That was the first thing I tried..what the site told me, but its still telling me I'm not connected to the internet when I am. Should I just delete everything by hand. Like I said I wanted to take it back and upgrade to the 80 gig ipod.

Sometimes iMac will not boot up

hey guys i have been having this on going problem for about a week now. Ok so here's what's happening, this usually happens at night. It seems that my iMac will not boot up, I have my computer put to sleep when I go to sleep and I can wake it up again in the morning. Now when I go out in the evening today for example, I just got home, woke my computer up and everything seemed fine. After a little bit my computer froze so, I restarted it and it will not boot up it would get stuck on the gray screen, sometimes the apple and the spinning thing under it (not the beach ball one) would show up and sometimes I would have just a grey screen. Over the past week I've tried the following:
Reset the Pram
Booted up from the installation cd.
Removed all the cords waited for a couple min. then tried again
Eventually I can boot up, However I am very concerned to what the problem might be.
O yea I also ran a permission repair
One final thing if knows how to protect macs with an anti virus or something similar, it would really help me out.
Thanks

Hi Karim
The symptoms you describe could be caused by bad RAM.
Follow this link to learn about testing memory.
With your iMac you should have received an Apple Hardware Test CD, if not it's included on the Installation DVD (it would state that written somewhere on the DVD). There's also a RAM test included, but it isn't as dependable as memtest (mentioned in the link above) in my experience.
Follow this link to learn how to start the Apple Hardware Test.
Kind regards
--greg

My Macbook Pro will not boot up. I can hear the sound that it has started and then goes into an infinite loop.

My Macbook Pro will not boot up. I can hear the sound that it has started and then it goes into an infinite loop.

What model MBP and which version of OS X? Sounds as if the hard drive may have failed. If you have an installation disc, try booting with it. If your machine came with Lion or Mountain Lion, try booting to the Recovery partition - Command and R keys held down while booting.
Clinton

HELP!!! MBA will not boot. It's in a constant "reboot loop!"

Hi! I was having issues with my MBA and it's well known problem with getting a bit hot and shutting down the core etc. One post mentioned coolbook. Several peole gave it the thumbs up so I decided to give it a try. Installed it and was asked to restart. Now my MBA is in a constant reboot loop and will not start-up. it gets as far as the gray screen with the Apple logo and the spinning wheel. Then about a minute or so later it reboots. And this goes on and on forever. The MBA is now insanely hot and I have turned the MBA off not to cause any damage.
I can not boot in safe mode.
Any ideas??
Thanks!!

thanks for the views, but seems nobody wanted to help. cheers for that!
i managed to reboot using the OS X DVD and reinstalling. Now I have an eject symbol in my system bar top right corner and my superdrive will not "eject". this means I can not use the USB for anything else. meanwhile I ejected the OS X DVD from the drive and tried to reinsert it. NADA.
Getting to the point where I am fed up with the MBA. It gets so hot I could fry an egg on it. The system must be running something in the background, becasue even with a new install it still is slow and stutters (and no, I did not start you tube!) either this is from a real crappy batch, or I looked at it the wrong way.
Looks like I am heading back to the MBpro.

Why can I (sometimes) not boot until running AHT?

Apologies for the strangely worded question - I'm very confused by this issue.
I have a 15-inch early 2011 MBP. I've added a Vertex 4 SSD as the primary boot drive, keeping the stock HD as a second drive, and upgraded the ram to 2x4gb. Everything else is standard.
Recently I started having problems with OSX freezing and shutting down, sometimes not booting back up successfully - I put it down to some dodgy graphics drivers I'd installed (was running very hot and I suspect overheating) so I backed up my user files and did a full reinstall. It seemed to be OK since then.
Today I had problems again - I think after the battery ran out while I was using it (I don't know if this is related). It shut down and I'd get a grey screen indefinitely when I rebooted, and I just couldn't get back into OSX. These are the things I tried, roughly in the order I tried them:
Performing a safe boot - I'd get the Apple logo and slider, which would progress roughly two thirds of the way in, then I'd get a blue screen
Performing a verbose safe boot - unresponsive grey screen
Booting from local recovery disk - unresponsive grey screen
Resetting NVRAM - made no difference
Resetting SMC - made no difference
Booting to single user mode and running fsck until it comes back clean (no 'volume was modified' message) and restarting - no difference
Trying to isolate any hardware problems - swapping out RAM, disconnecting secondary drive etc - no luck
Finally - running network AHT (opt+D on startup) This didn't find any problems, but seemed to solve whatever problem I was having. I restarted after this and OSX came back up as if nothing had been happening.
So my questions are these - I'd appreciate any insight even if they're not complete answers, because I can't figure out what's going on.
What did AHT do that fixed my problem?
Does that point to a hardware issue, even though the test came back OK?
What can I do to prevent it happening again?
Thanks!

Thanks,
Does this excerpt from the system log help? It seems to represent a (failed)boot attempt.
There's a couple of things at the bottom that look a bit suspicious, but I don't know how to interpret them - ERROR: smcReadData8 failed for key B0PS and activation bcstop timer fired!
Jul 22 10:56:46 localhost bootlog[0]: BOOT_TIME 1406019406 0
Jul 22 10:56:48 localhost syslogd[17]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Jul 22 10:56:48 localhost syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
Jul 22 10:56:48 localhost syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Jul 22 10:56:48 localhost syslogd[17]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Jul 22 10:56:48 localhost syslogd[17]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Jul 22 10:56:48 localhost syslogd[17]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Jul 22 10:56:48 localhost syslogd[17]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Jul 22 10:56:48 localhost syslogd[17]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Jul 22 10:56:48 localhost syslogd[17]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Jul 22 10:56:48 localhost syslogd[17]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Jul 22 10:56:48 localhost syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Jul 22 10:56:48 --- last message repeated 6 times ---
Jul 22 10:56:48 localhost kernel[0]: Longterm timer threshold: 1000 ms
Jul 22 10:56:48 localhost kernel[0]: PMAP: PCID enabled
Jul 22 10:56:48 localhost kernel[0]: Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Jul 22 10:56:48 localhost kernel[0]: vm_page_bootstrap: 1963451 free pages and 117317 wired pages
Jul 22 10:56:48 localhost kernel[0]: kext submap [0xffffff7f807a9000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a9000]
Jul 22 10:56:48 localhost kernel[0]: zone leak detection enabled
Jul 22 10:56:48 localhost kernel[0]: "vm_compressor_mode" is 4
Jul 22 10:56:48 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jul 22 10:56:48 localhost kernel[0]: standard background quantum is 2500 us
Jul 22 10:56:48 localhost kernel[0]: mig_table_max_displ = 74
Jul 22 10:56:48 localhost kernel[0]: TSC Deadline Timer supported and enabled
Jul 22 10:56:48 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
Jul 22 10:56:48 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
Jul 22 10:56:48 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
Jul 22 10:56:48 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
Jul 22 10:56:48 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
Jul 22 10:56:48 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
Jul 22 10:56:48 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
Jul 22 10:56:48 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
Jul 22 10:56:48 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Jul 22 10:56:48 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jul 22 10:56:48 localhost kernel[0]: calling mpo_policy_init for Sandbox
Jul 22 10:56:48 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Jul 22 10:56:48 localhost kernel[0]: calling mpo_policy_init for Quarantine
Jul 22 10:56:48 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Jul 22 10:56:48 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jul 22 10:56:48 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jul 22 10:56:48 localhost kernel[0]: MAC Framework successfully initialized
Jul 22 10:56:48 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Jul 22 10:56:48 localhost kernel[0]: AppleKeyStore starting (BUILT: Jun 3 2014 21:40:51)
Jul 22 10:56:48 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Jul 22 10:56:48 localhost kernel[0]: ACPI: sleep states S3 S4 S5
Jul 22 10:56:48 localhost kernel[0]: pci (build 21:30:51 Jun 3 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
Jul 22 10:56:48 localhost kernel[0]: [ PCI configuration begin ]
Jul 22 10:56:48 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 6689
Jul 22 10:56:48 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 21:36:10 Jun 3 2014) initialization complete
Jul 22 10:56:48 localhost kernel[0]: console relocated to 0xf90010000
Jul 22 10:56:48 localhost kernel[0]: [ PCI configuration end, bridges 12, devices 18 ]
Jul 22 10:56:48 localhost kernel[0]: mcache: 8 CPU(s), 64 bytes CPU cache line size
Jul 22 10:56:48 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
Jul 22 10:56:48 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Jul 22 10:56:48 localhost kernel[0]: rooting via boot-uuid from /chosen: F2E2754A-C2D0-3FD4-9754-621EEADDB1EB
Jul 22 10:56:48 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jul 22 10:56:48 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Jul 22 10:56:48 localhost kernel[0]: com.apple.AppleFSCompressionTypeLZVN kmod start
Jul 22 10:56:48 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Jul 22 10:56:48 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Jul 22 10:56:48 localhost kernel[0]: com.apple.AppleFSCompressionTypeLZVN load succeeded
Jul 22 10:56:48 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Jul 22 10:56:48 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Jul 22 10:56:48 localhost kernel[0]: BTCOEXIST off
Jul 22 10:56:48 localhost kernel[0]: BRCM tunables:
Jul 22 10:56:48 localhost kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
Jul 22 10:56:48 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe88be4c; max speed s800.
Jul 22 10:56:48 localhost kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
Jul 22 10:56:48 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchSeriesAHCI/PRT1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/OCZ-VERTEX4 Media/IOGUIDPartitionScheme/Mac OS@2
Jul 22 10:56:48 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
Jul 22 10:56:48 localhost kernel[0]: jnl: b(1, 2): replay_journal: from: 5731840 to: 5806080 (joffset 0x3b6000)
Jul 22 10:56:48 localhost kernel[0]: jnl: b(1, 2): journal replay done.
Jul 22 10:56:48 localhost kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
Jul 22 10:56:48 localhost kernel[0]: hfs: mounted Mac OS on device root_device
Jul 22 10:56:47 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jul 22 10:56:47 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
Jul 22 10:56:48 localhost com.apple.SecurityServer[14]: Session 100000 created
Jul 22 10:56:48 localhost distnoted[20]: # distnote server daemon absolute time: 2.788835412   civil time: Tue Jul 22 10:56:48 2014   pid: 20 uid: 0 root: yes
Jul 22 10:56:48 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Jul 22 10:56:48 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Jul 22 10:56:48 localhost com.apple.SecurityServer[14]: Entering service
Jul 22 10:56:48 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
Jul 22 10:56:48 localhost configd[18]: dhcp_arp_router: en1 SSID unavailable
Jul 22 10:56:48 localhost kernel[0]: SMC::smcHandleInterruptEvent WARNING status=0x0 (0x40 not set) notif=0x0
Jul 22 10:56:48 localhost kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
Jul 22 10:56:48 localhost kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
Jul 22 10:56:48 localhost kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
Jul 22 10:56:48 localhost kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
Jul 22 10:56:48 localhost kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
Jul 22 10:56:48 localhost kernel[0]: Previous Shutdown Cause: 3
Jul 22 10:56:48 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
Jul 22 10:56:48 localhost kernel[0]: AGC: 3.6.22, HW version=1.9.23, flags:0, features:20600
Jul 22 10:56:48 localhost kernel[0]: IOBluetoothUSBDFU::probe
Jul 22 10:56:48 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0042
Jul 22 10:56:48 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xe400 ****
Jul 22 10:56:48 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xe400 ****
Jul 22 10:56:48 localhost kernel[0]: init
Jul 22 10:56:48 localhost kernel[0]: probe
Jul 22 10:56:48 localhost kernel[0]: start
Jul 22 10:56:48 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xe400
Jul 22 10:56:48 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Jul 22 10:56:48 localhost UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Jul 22 10:56:48 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jul 22 10:56:48 localhost kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0xdcc0 -- 0x2000 -- 0xe400 ****
Jul 22 10:56:48 localhost UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
Jul 22 10:56:48 localhost kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Jul 22 10:56:48 localhost configd[18]: network changed.
Jul 22 10:56:48 Jakes-MacBook-Pro.local configd[18]: setting hostname to "Jakes-MacBook-Pro.local"
Jul 22 10:56:49 Jakes-MacBook-Pro kernel[0]: DSMOS has arrived
Jul 22 10:56:49 Jakes-MacBook-Pro kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6760
Jul 22 10:56:49 Jakes-MacBook-Pro kernel[0]: fGPUIdleIntervalMS = 0
Jul 22 10:56:50 Jakes-MacBook-Pro.local fseventsd[38]: event logs in /.fseventsd out of sync with volume. destroying old logs. (275 3 822)
Jul 22 10:56:50 Jakes-MacBook-Pro.local fseventsd[38]: log dir: /.fseventsd getting new uuid: 64D0AB9C-3D99-4E86-877A-CBD475452A4D
Jul 22 10:56:50 Jakes-MacBook-Pro kernel[0]: VM Swap Subsystem is ON
Jul 22 10:56:50 Jakes-MacBook-Pro.local hidd[67]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
Jul 22 10:56:50 Jakes-MacBook-Pro.local hidd[67]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jul 22 10:56:50 Jakes-MacBook-Pro.local blued[40]: hostControllerOnline - Number of Paired devices = 1, List of Paired devices = (
     "c4-2c-03-9e-4b-7c"
Jul 22 10:56:50 Jakes-MacBook-Pro.local mDNSResponder[59]: mDNSResponder mDNSResponder-522.92.1 (Jun 3 2014 12:57:56) starting OSXVers 13
Jul 22 10:56:50 Jakes-MacBook-Pro.local com.apple.usbmuxd[45]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
Jul 22 10:56:50 Jakes-MacBook-Pro.local mds[58]: (Normal) FMW: FMW 0 0
Jul 22 10:56:50 Jakes-MacBook-Pro.local loginwindow[62]: Login Window Application Started
Jul 22 10:56:50 Jakes-MacBook-Pro.local apsd[79]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Jul 22 10:56:50 Jakes-MacBook-Pro.local systemkeychain[91]: done file: /var/run/systemkeychaincheck.done
Jul 22 10:56:50 Jakes-MacBook-Pro.local mDNSResponder[59]: D2D_IPC: Loaded
Jul 22 10:56:50 Jakes-MacBook-Pro.local mDNSResponder[59]: D2DInitialize succeeded
Jul 22 10:56:50 Jakes-MacBook-Pro.local mDNSResponder[59]:   4: Listening for incoming Unix Domain Socket client requests
Jul 22 10:56:50 Jakes-MacBook-Pro.local networkd[110]: networkd.110 built Aug 24 2013 22:08:46
Jul 22 10:56:50 Jakes-MacBook-Pro.local configd[18]: network changed: DNS*
Jul 22 10:56:50 Jakes-MacBook-Pro.local aosnotifyd[80]: aosnotifyd has been launched
Jul 22 10:56:50 Jakes-MacBook-Pro aosnotifyd[80]: assertion failed: 13E28: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
Jul 22 10:56:51 Jakes-MacBook-Pro kernel[0]: [BNBMouseDevice::init][80.14] init is complete
Jul 22 10:56:51 Jakes-MacBook-Pro kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
Jul 22 10:56:51 Jakes-MacBook-Pro kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
Jul 22 10:56:51 Jakes-MacBook-Pro.local WindowServer[105]: Server is starting up
Jul 22 10:56:51 Jakes-MacBook-Pro.local locationd[64]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
Jul 22 10:56:51 Jakes-MacBook-Pro.local locationd[64]: NBB-Could not get UDID for stable refill timing, falling back on random
Jul 22 10:56:51 Jakes-MacBook-Pro.local WindowServer[105]: Session 256 retained (2 references)
Jul 22 10:56:51 Jakes-MacBook-Pro.local WindowServer[105]: Session 256 released (1 references)
Jul 22 10:56:51 Jakes-MacBook-Pro.local locationd[64]: Location icon should now be in state 'Inactive'
Jul 22 10:56:51 Jakes-MacBook-Pro.local locationd[64]: locationd was started after an unclean shutdown
Jul 22 10:56:51 Jakes-MacBook-Pro.local WindowServer[105]: Session 256 retained (2 references)
Jul 22 10:56:51 Jakes-MacBook-Pro.local WindowServer[105]: init_page_flip: page flip mode is on
Jul 22 10:56:51 Jakes-MacBook-Pro dnsmasq[83]: setting --bind-interfaces option because of OS limitations
Jul 22 10:56:51 Jakes-MacBook-Pro dnsmasq[83]: failed to access /etc/resolv.conf: No such file or directory
Jul 22 10:56:51 Jakes-MacBook-Pro.local digest-service[93]: label: default
Jul 22 10:56:51 Jakes-MacBook-Pro.local digest-service[93]: dbname: od:/Local/Default
Jul 22 10:56:51 Jakes-MacBook-Pro.local digest-service[93]: mkey_file: /var/db/krb5kdc/m-key
Jul 22 10:56:51 Jakes-MacBook-Pro.local digest-service[93]: acl_file: /var/db/krb5kdc/kadmind.acl
Jul 22 10:56:51 Jakes-MacBook-Pro.local digest-service[93]: digest-request: uid=0
Jul 22 10:56:51 Jakes-MacBook-Pro kernel[0]: [AppleMultitouchDevice::start] entered
Jul 22 10:56:51 Jakes-MacBook-Pro kernel[0]: AppleLMUController found an AG vendor product (0x9cb7), notifying SMC.
Jul 22 10:56:51 Jakes-MacBook-Pro.local digest-service[93]: digest-request: netr probe 0
Jul 22 10:56:51 Jakes-MacBook-Pro.local digest-service[93]: digest-request: init request
Jul 22 10:56:51 Jakes-MacBook-Pro kernel[0]: createVirtIf(): ifRole = 1
Jul 22 10:56:51 Jakes-MacBook-Pro kernel[0]: in func createVirtualInterface ifRole = 1
Jul 22 10:56:51 Jakes-MacBook-Pro kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
Jul 22 10:56:51 Jakes-MacBook-Pro kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
Jul 22 10:56:51 Jakes-MacBook-Pro kernel[0]: Created virtif 0xffffff801ef89400 p2p0
Jul 22 10:56:51 Jakes-MacBook-Pro.local digest-service[93]: digest-request: init return domain: BUILTIN server: JAKES-MACBOOK-PRO indomain was: <NULL>
Jul 22 10:56:51 Jakes-MacBook-Pro.local airportd[81]: airportdProcessDLILEvent: en1 attached (up)
Jul 22 10:56:51 Jakes-MacBook-Pro.local awacsd[77]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
Jul 22 10:56:51 Jakes-MacBook-Pro.local awacsd[77]: InnerStore CopyAllZones: no info in Dynamic Store
Jul 22 10:56:52 Jakes-MacBook-Pro kernel[0]: ast_pending=0xffffff800a8cb690
Jul 22 10:56:52 Jakes-MacBook-Pro kernel[0]: cpu_interrupt=0xffffff800a8e3910
Jul 22 10:56:52 Jakes-MacBook-Pro kernel[0]: vboxdrv: fAsync=0 offMin=0x253f offMax=0x3846
Jul 22 10:56:52 Jakes-MacBook-Pro kernel[0]: VBoxDrv: version 4.3.12 r93733; IOCtl version 0x1a0007; IDC version 0x10000; dev major=34
Jul 22 10:56:52 Jakes-MacBook-Pro kernel[0]: VBoxDrv: vmx_resume=ffffff800a8f02d0 vmx_suspend=ffffff800a8f0290 vmx_use_count=ffffff800aed8848 (0) cr4=0x606e0
Jul 22 10:56:52 Jakes-MacBook-Pro kernel[0]: VBoxFltDrv: version 4.3.12 r93733
Jul 22 10:56:52 Jakes-MacBook-Pro.local com.apple.systemadministration.writeconfig[218]: ### Error:-60005 File:/SourceCache/Admin/Admin-594.1/SFAuthorizationExtentions.m Line:36
Jul 22 10:56:52 Jakes-MacBook-Pro kernel[0]: VBoxAdpDrv: version 4.3.12 r93733
Jul 22 10:56:52 Jakes-MacBook-Pro kernel[0]: en1: 802.11d country code set to 'ES'.
Jul 22 10:56:52 Jakes-MacBook-Pro kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
Jul 22 10:56:53 Jakes-MacBook-Pro.local mds_stores[113]: (/.Spotlight-V100/Store-V2/D069037C-1284-4440-8DB8-DB2FB5A92714)(Error) IndexCI in ContentIndexPtr openIndex(int, char *, DocID, char *, _Bool, _Bool, _Bool, CIDocCounts *, int *, int *, const int):unexpected sync count 3 3 3 3, expected 2
Jul 22 10:56:54 Jakes-MacBook-Pro kernel[0]: MacAuthEvent en1   Auth result for: c8:b3:73:38:33:dd MAC AUTH succeeded
Jul 22 10:56:54 Jakes-MacBook-Pro kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
Jul 22 10:56:54 Jakes-MacBook-Pro kernel[0]: AirPort: Link Up on en1
Jul 22 10:56:54 Jakes-MacBook-Pro kernel[0]: en1: BSSID changed to c8:b3:73:38:33:dd
Jul 22 10:56:54 Jakes-MacBook-Pro kernel[0]: AirPort: RSN handshake complete on en1
Jul 22 10:56:54 Jakes-MacBook-Pro kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Jul 22 10:56:59 Jakes-MacBook-Pro.local configd[18]: network changed: DNS* Proxy
Jul 22 10:56:59 Jakes-MacBook-Pro.local configd[18]: network changed: DNS*
Jul 22 10:56:59 Jakes-MacBook-Pro.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Kimchinet' making interface primary (protected network)
Jul 22 10:56:59 Jakes-MacBook-Pro.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
Jul 22 10:56:59 Jakes-MacBook-Pro.local UserEventAgent[11]: Captive: en1: Probing 'Kimchinet'
Jul 22 10:56:59 Jakes-MacBook-Pro.local configd[18]: network changed: v4(en1!:192.168.2.140) DNS+ Proxy+ SMB
Jul 22 10:57:02 Jakes-MacBook-Pro.local ntpd[85]: proto: precision = 1.000 usec
Jul 22 10:57:02 Jakes-MacBook-Pro.local UserEventAgent[11]: tcp_connection_destination_prepare_complete 1 connectx to 2001:5008:101:292::c77#80 failed: 65 - No route to host
Jul 22 10:57:02 Jakes-MacBook-Pro.local UserEventAgent[11]: tcp_connection_destination_prepare_complete 1 connectx to 2001:5008:101:283::c77#80 failed: 65 - No route to host
Jul 22 10:57:02 Jakes-MacBook-Pro.local UserEventAgent[11]: tcp_connection_destination_prepare_complete 1 connectx to 2001:5008:101:28c::c77#80 failed: 65 - No route to host
Jul 22 10:57:02 Jakes-MacBook-Pro.local UserEventAgent[11]: tcp_connection_handle_destination_prepare_complete 1 failed to connect
Jul 22 10:57:03 --- last message repeated 2 times ---
Jul 22 10:57:03 Jakes-MacBook-Pro.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
Jul 22 10:57:03 Jakes-MacBook-Pro.local apsd[79]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Jul 22 10:57:04 Jakes-MacBook-Pro.local configd[18]: network changed.
Jul 22 10:57:04 Jakes-MacBook-Pro.local apsd[79]: Unrecognized leaf certificate
Jul 22 10:57:09 Jakes-MacBook-Pro.local awacsd[77]: Exiting
Jul 22 10:57:35 Jakes-MacBook-Pro kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xe400 ****
Jul 22 10:57:50 Jakes-MacBook-Pro kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0PS (kSMCKeyNotFound)
Jul 22 10:57:50 Jakes-MacBook-Pro kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0OS (kSMCKeyNotFound)
Jul 22 10:57:54 Jakes-MacBook-Pro kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xe400 ****
Jul 22 10:58:32 Jakes-MacBook-Pro.local warmd[44]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
Jul 22 10:58:33 Jakes-MacBook-Pro kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xe400 ****

M4 SSD 256GB 2.5 inch sometimes not booting on Sony Vaio VGN-FZ11E

I installed a Crucial m4 SSD 256GB 2.5 inch on the Sony Vaio laptop VGN FZ11E using the kit provided. The operating system used is Windows Vista. The drive worked great the first time I booted the laptop, but since the second booting the system sometime stops while booting and I have to force the computer to restart till at some points it works (which can be after 1, 2, 3, 4 or even more attempts). The computer starts and the drive works for the first 10 seconds or so, then when the WLAN light of the laptop comes up, it stops working (no hard disk light). I have installed the last firmware, checked the drivers and made sure that the m4 drive is recognised and prioritized in the BIOS (this is the only drive installed, and it has a partition which is hidden). I have done a Power Cycle as recomended on the Crucial website, but this did not solve the problem. Any suggestions?

Hi, I have the same issue you are describing, with "Operating system not found", not the one laurentzo says. My VAIO VGN-FE11H with BIOS R0174J3 gets stuck at this point, and that happens many times with this version of BIOS. With version R0074J3 also happened, but I have the perception that it was less usual. Anyway, I tried to upgrade my BIOS because the failure is unacceptable, and 8 of 10 times I can´t boot my laptop because the disk is not recognised, despite the fact that when it boots, everything works perferctly. My BX100 250GB firmware is MU02, and my situation is quite desperating, because the workaround that you suggest isn't working.Would you please update this firmware, or would you know any BIOS parameter that could make it boot at least half of the times??P.S.: I have also tried enabling AHCI on BIOS, etc.

HT1414 My IPhone 4S will not boot up. I hit restart and phone is in a loop flashing the Apple logo

My IPhone 4S will not boot up. I hit restart and phone is in a loop flashing the Apple logo

salayer wrote:
should I restore from an old icloud back up from last month and see if my wifi comes on then?
Unfortunately, you can't restore an iCloud backup without using wifi so that isn't an option.

Please help urgently!!! BOOT LOOP - NOT JAILBROKEN

my iphone 4s is stuck in a boot loop and wont restore, the error code will differ from time to time, they will be either error '21' or '3194' not jailbroken either! any help?

Hi TPM007,
Thanks for visiting Apple Support Communities.
If your device is in recovery mode (showing the connect to iTunes screen), first try resetting it:
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
From:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Next, try the troubleshooting method in this article before restoring your iPhone again:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Best Regards,
Jeremy

How to fix 3gs boot loop problem? - dfu doesn't work (not jailbroken)

my 3gs is stuck in a boot loop, and i have tried to dfu it and restore it for 6 hours, nothing works.. google cant help - yesterday it worked (dfu restore), once, but it was when my iphone was assembled outside the case, and when i assembled it i bootlooped again
any help`?

Hi,
I'm sorry you are having this problem, here is another post about the same problem, where the cause of the problem is described:
https://support.mozilla.com/en-US/questions/894442
A bug has been filed to track resolution of the issue here, because a true fix isn't yet available:
https://bugzilla.mozilla.org/show_bug.cgi?id=703015
I apologize for the inconvenience.
Regards,
Michelle

IMac will not boot, hard drive file problem? Can't install OS in 2nd part.

The iMac will not boot. The Apple displays on the screen, the cursor spins for awhile, and then it loops into a reboot effort.
Last night, I was doing a lot of custom file sharing settings using the include enclosed folders option at the bottom of the Get Info window.
Question 1: Could that file sharing process have messed things up?
In an effort to get things going........ A few weeks back, I used Disk Utility to create a 2nd partition, with the intent of installing Ubuntu Linux there. I never attempted the install, as far as I can remember, while playing with the Ubuntu Live CD. So, I thought I would install 10.5.6 from the CD in the 2nd partition. But I get an error message that says "The installer could not create the folder "/Volumes/Ubuntu 9.10/BaseSystem.pkg.161nDNDdQ.""
Question 2: I also shared that partition, could that have caused the OS install failure?
Question 3: If I understand the book correctly, I can try to install the OS from the CD on the 1st partition, and not lose my data, correct? Unfortunately, I don't have any backup for the data, as I don't own any drives large enough yet to accommodate the data on the drive.
Question 4: Anyone have any other thoughts as to what ent wrong?

Hi, Grant.
Sometimes, it just pays to think on a problem. I awoke thinking, if it will boot the OS X install CD, it ought to boot my Ubuntu Live CD. And then, maybe I can change permissions on the first partition. As soon as I thought that, it occurred to me, if the problems are with the permissions, what if I used the OS X disk, and erased (formatted) the Ubuntu partition. That should set all the permissions on that partition back to default. Would OS X install then to the Ubuntu partition?
You better believe it did!! I'm typing this from the Mac after updating my 10.5.6 to 10.5.8 in the 2nd partition, and I'm booting from the 2nd partition.
I then did as you suggested, and from the Mac, I repaired the permissions to the first partition. But, the result was the same, there are a few permissions that do not match, and Disk Utility cannot, does not, or will not correct them.
I'm currently downloading the 10.5.8 combo update .dmg file. My thought is to burn that to a disk, and then install it over the version in partition 1. And trust that the current installation on partition 1 does not have any cross linked files that will destroy some data.
I do have some old ATA IDE drives I can hook externally to the Mac, and copy some of the information I have from the Mac to those drives before doing the 10.5.8 install.
Can you think of a better solution?

W530 sometimes do not boot / boot loop

Similar Messages

Maybe you are looking for