W540 FaceTime HD Camera (Display) Driver Not Installed

My new W540 (11/10/2014) Lenovo Solution Center under the Check-up tab alerts me that the FaceTime HD Camera (Display) Driver is Not Installed. Such as it is, the camera, a 720P HD, works just fine. A search of resources does not uncover any comment or Driver on this issue. So, since there is no problem as near as I can determine, should I just ignore the lack of Driver issue, and if so, what is the procedure to stop the Solution Center from alerting me to this error? But if on the other hand I should install the Driver, where is that to be found?
MTM 20BG-CTOWW
Other comments not related to the Subject:
I'm using the W540 in the Ultra Dock with video on a second monitor, an Apple monitor, using a Thunderbolt cable. There is no Thunderbolt port in the Dock, so I use the W540 port which surprised me that it works.
FWIW, it is taking me a lot of time learning the location of programs and utilities having moved from my old W510 Win 7(64) setup to the W540 Win(64) 8.1 setup.
W540 20GBCTO, Ultra Dock, W520, 4270CTO, W510, 4318CTO; (2)T500, 2081CTO; Y560, 064657U, Y530, 405166U; T61p, 6465CTO, A31p, and L2461x Multi-touch Monitor, Mini Dock Plus Series 3
Solved!
Go to Solution.

It is not a problem with the ThinkPad's camera. It is the camera in the Apple monitor that you don't have drivers for.
Being Apple, they might not even make driver for Windows.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

Similar Messages

W510 Multi Touch Display Driver NOT installing properly on a fresh Windows 7 Professional Image.

Hello everyone, this is my first post here and I will make it as short as possible. First, thanks in advance for taking the time to read this and helping me out in any way possible.
I have a fairly new W510 machine with a crucial 256GB SSD in it. My SSD crapped out (luckily I had a back up) crucial sent me a new one and I just imaged the new drive a couple of days ago with my backup (The backup is made from the original Lenovo install). However during the imaging some Windows components were damaged for some reason (perhaps due to the previous drive crapping out). The only fix was to go ahead and use the retail windows 7 Pro DVD to "repair" the windows installation by clicking the "upgrade" button after inserting the disk. --As Microsoft suggested this to fix an existing win 7 installation. After I did that EVERYTHING worked flawlessly! I was really happy with the machine, it booted in 30 seconds and what not. However, the multi touch driver for my W510 screen will not stick ... no matter how many times I install it, as soon as I "log out" of the machine, the driver rolls back to a normal pointing device and multi touch is disabled and my on-screen keyboard vanishes. It is the weirdest thing I've ever seen. Here is exactly what I'm doing.
1 - Log into my Admin user account
2 - Install this: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74908
3 - Multi Touch works great!
4 - Logoff or Lock machine or put it to sleep.
5 - Log back in my admin user account
6 - Touch screen works but all multi touch features are now disabled (As in no pan/scroll no pinch to zoom no nothing) the touch screen simply works as a simple mouse (point and click).
7 - Install the driver again (mentioned in step 2) --Again everything works great.
8 - Repeated 3 to 7 ... Forever …
I tried completely removing the driver and re-installing it from scratch, I tried getting the raw ISD-V4 (W510's screen driver) directly from Wacom (works too) but again the minute I Logoff or lock that machine, the driver just rolls back or goes back to a normal pointing device. It is really weird that this is happening. The touch screen always worked well and I never had any problems with it. Also in device manager nothing has changed, it seems that everything is in good shape there.
My W510 specs:
- Intel Core i7 Extreme X920
- 16.0 GB DDR3 RAM (G-Skill)
- 256 GB Crucial M4 SSD
- No GOBI 2000 Card.
- Intel WiMax Installed and Enabled.
- CD-ROM Drive in UltraBay
- Cam / Fingerprint Reader / Color Sensor / Smartcard Reader / Expansion all installed
- Windows 7 Professional SP1
It seems that Windows is somehow defaulting to a different "driver" that is over-riding the multi-touch driver I download and install when I log off. Do I need to install the driver outside my user account? Or is there a method to erase the default drivers or something? I am trying to avoid re-imaging this machine from scratch using the provided Lenovo Windows Partition. I just have too much development software on it, some of which will take me forever to re-install and re-configure.
Any help is appreciated.
Thanks!
Al.
Solved!
Go to Solution.

Hi
Please update the monitor driver
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS015012
Hope This Helps
Cheers!!!

Problems adding USB printer - "Driver not installed" - but it is

Apparently, 10.3.9 has some problems with USB printers. For the record, I had already installed this earlier prior to the upgrade and everything worked fine - but due to crashing due to a faulty power supply - I've had to re-configure everything.
I, and many others in this forum, have found a strange problem when trying to add a printer (And yes, other people have asked about this but I haven't seen any answers at all that are useful. The only possible solution seems to be "upgrade to 10.4" and that is unacceptable. Does Apple check these forums?).
After clicking "add printer" in the utility, the software finds the correct printer (so obviously the physical connection to the printer is OK) and displays it with a question mark over it's icon and "driver not installed" next to it. I can't select this image or text.
After searching for a couple of minutes, a dialogue box pops up saying "New drivers detected. Do you want to reload the browser?" (I assume the printer setup utility is the "browser"?).
I click yes and nothing happens. No PPDs show up in the list. This happens when I select USB as well as Apple Talk from the printer-type pull-down menu.
How can I start printing again?
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)

First, welcome to the discussions.
For the record, Apple does not normally respond to these Forums.
You mention (Due to Crashing) Whenever you have an issue with your machine it can disrupt in almost any area, and is normally caused by SOMETHING.
As of right now it would appear you might be chasing your tail.
When you choose to upgrade your Operating System there is No Guarantee that your Printer and it's drivers will work on another completely different Operating System.
Your best bet at this point is to drag all of your printer related folders to the trash, empty your trash, and plug your USB Printer (What KIND) into your machine directly.
Shut your machine clear OFF for a minute or so and do the same to your printer, pull the power adapter from it.
Now plug in your printers Power Adapter, Plug in the USB to your Printer to your computer and restart it.
Take the Disc that came with your printer and re insert it and download the Installation Folder and any utility folder that may come with it.
After you have done this don't try to print, Go directly to your Printer Manufactures Web site and search for the latest updates to your printer and the Operating System you are using.
These will more often than not download to your desktop.
You must drag these to the setup folder and or the utilities folder and then double click them to launch them. after you have completed this your printer should work.
One other thing, If you have Classic and or OS9 on your machine you might have to do the same for OS9 Applications , and Utilities for it to print in Classic. Don

Camera Raw will not install on my mac,os 10.7.5. When I click on the install package the main install screen opens and that is as far as I can proceed with the down load. I have to force quit the software and try again. I have deleted and downloaded the s

Camera Raw will not install on my mac,os 10.7.5. When I click on the install package the main install screen opens and that is as far as I can proceed with the down load. I have to force quit the software and try again. I have deleted and downloaded the software several times to no avail. I need some help.

Appreciate your help Ian and others. I have since uninstalled FCS and reinstalled FCXP only to get the same thing. Loading FCXP stalls at "Looking for Compressor Support". When I first downloaded FCXP from the App store I didn't notice that FCS was being placed in it's own folder. It's not something I did manually. Although moved into it's own folder with FCXP on the same drive. I was not able to open FCS apps. They would load and then "quit unexpectantly". They opened just fine before I downloaded FCXP. Do I need to purchase Compressor so that FCXP recognizes it? It seems this is where it stalls. It doesn't explain however why my computer "FREEZES" while doing this. I am in the process of re-installing Lion to see if this helps, otherwise I am at a complete loss.

Hp Officejet Pro 8600 on Windows 8.1 driver not installed

Using Windows 8.1 and HP Officejet pro 8600. The printer is installed on a wireless network. But on Device Manager, it says "driver not installed". Most printing tasks are successful, but for some I need to have the driver installed on the computer. I have tried troubleshooting, but am unsuccessful. I would appreciate help. Thanks

Hi emax,
Print a configuration page to get the printer's IP address. Printing a Network Configuration Page.
If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer)
If it loads the printer's network page then the printer is on the network.
Power cycle the router, computer and printer.
Try printing again.
If the issue persists, add a new device if the IP address is valid.
Right-click the Start button () or the lower left corner of the screen, and then click Search.
In the Search box, type HP, and then click the icon for your printer. The printer software opens.
Click Utilities, and then click Printer Setup & Software Selection.
Click Connect a new printer.
Test the printer over the wireless network.
Please provide the following information so I can assist you better.
What is the printer's first 3 sets of numbers for the IPV4 address?
Could you access the printer's EWS?
Were you able to add a new device?
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to deal with the "driver not installed" message?

My issue, and it seems many others here have it too, is how to install a printer driver in the face of the "driver not installed" message.
In my case, it's an HP4160 Rendevous printer. I've deleted the com.apple.print files in the Library, reinstalled the software, made sure that BDC package, or whatever it's called is installed, even downloaded and run the printer fix software from Fixamac.
Nothing works.
I have the feeling this isn't a printer or driver-specific issue, but is an OS problem. Does anyone have a suggestion?

It appears the Deskjet 4160 will not work with an Airport. Connected via USB, the driver installs normally and the the printer appears to run just fine, although I haven't done much with it yet.
It simply will not work on a wireless network through an Airport. Frustrating, but workable by bringing the laptop to the printer.

TCP / IP Protocol Driver - not installed (using Windows 7 Home Premium (64 bit) Service Pack 1

I am using a ThinkPad T520 laptop. Lenovo Solutions Center keeps referring me (with a yellow exclamation mark) to the Device Manager and alerting me to a "non-critical" error. The message is "TCP / IP Protocol Driver - not installed".
I have found numerous pieces of advice for Windows XP and Vista - but very little for Windows 7. I have however tried the Microsoft "Fix it" solution and it had no effect.
I am still able to connect to the internet via Ethernet cable and wifi. It is however worrying that the warning keeps being raised.
Does anyone know how I can fix it?

Hi Tripplec.
Thanks for the reply. I am away from home at present without my ThinkPad, so will try it at the weekend. I am an experienced computer user but this is a brand new machine and I have never had a laptop that produced error messages without providing any suggested fixes. It seems that Lenovo is not suitable for ordinary home users, but only for computer engineers. Sadly that is not me... so before I plunge in, can I just check some details?
1. You suggest removing the offending network adapters in device manager. Which are the offending adapters that cause a TCP/IP protocol driver error? I am nervous of removing the wrong things and making it worse!
2. You also suggest that I go to Network Connections via Control panel, properties of adapter, Install and select the desired Protocol(s) and install them. Is that an alternative fix to 1 above - or an essential follow-on after removing the offending adapters? (Last week I searched the machine and the Lenovo support page of drivers - and never found a TCP/IP protocol driver. If you know where one can be found, I would prefer to instal a new driver, rather than delete other devices and hope that the machine reinstalls them later!).
Much obliged for your assistance.
Fillet

Hp web cam drivers are not installed

hey i got problem,in device manger my hp web cam drivers are not installed ...from where should i download the drivers of hp web cam..thank u

Hi
HP Universal Camera Driver

PSE Backup wouldn't work: "CD device driver not installed; install PSE" didn't fix problem; Win7

I'm trying to backup by photos for the first time! in Photoshop 5.0 on a Windows 7 system. I get to "Full Backup" option, and get a pop-up that says "CD device driver not installed; reinstall PSE". I put my PSE disk into my computer, select "Repair... installs... missing files"; PSE re-installs, but I get the same message again when I try to backup. How do I find a CD device driver? (My DVD is formatted, but PSE can't find it.)

I just found a photoshop elements 5.0.2 update "patcher" and installed it. The install was successful but I still got the same message saying "CD device driver not installed". Might there be a problem since I'm now on Windows 7 and no longer on XP? I have no need to buy a newer version since Elements 5.0 does everything I need to do. Any other suggestions?

HP Envy 14 1260se graphics driver not installing correctly

Recently my computer crashed and I had to reformat my hard drive. I was able to install Windows 7 with the SP1 and I have most of the drivers installed from HPs website. However, I'm having trouble installing my gaphics card (ATI Mobility Radeon HD 5650).
I go to Device Manager and it marks an error for the "Standard VGA Graphics Adapter" the device status is "This device cannot start. (Code 10). I've downloaded the driver from HPs website and I can begin the installing process. However, halfway through I get a BlueScreen, LocaleID: 1033, BCCode: 116.
I've tried almost everything I can think of. I've uninstalled the driver and installed it again. I've downloaded the driver from AMDs website and tried installing it that way and all methods have failed. Always during the installation process I get the BlueScreen and must restore my computer to before I tried installing the driver.
I don't know if this would be the reason, but in my Device Manager and under Display adapters I have "Intel(R) HD Graphics" and the "Standard VGA Graphics Adapter" (which should be the Radeon 5650). So maybe I can't install my Radeon driver because it conflicts with my Intel card. I really don't know. (Before the clean install, my computer could switch between the cards. I don't think I have that ability in my computer right now.)
My computer is fully functional except that I can't use my graphics card. I appreaciate any help or advice out there.

Hello @notarealninja,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand that your notebook computer is not able to install the graphics drivers correctly, and I would be happy to assist you in this matter!
In order to further diagnose the error message displayed on your computer screen, I recommend following this document on Blue Screen BCCode 116. This should help install any necessary software to prevent the occurrence of another Blue Screen message.
Additionally, if the drivers still do not install correctly, I also suggest installing the original software and hardware drivers that came with your computer. This can be done by following this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update these drivers, please follow this document on Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Network Controller & Intel Chipset Driver not installing

Hello, I have 15 r203tx laptop. I have recently formatted my system and installed all the drivers. But NETWORK CONTROLLER driver and INTEL CHIPSET driver is not installing. INTEL CHIPSET driver is saying "please plug the device : device not found". NETWORK CONTROLLER hardware : "driver not found". WINDOWS 8.1 64-BIT Help me with some solution

Hi .  Welcome to the HP Forums! It is a wonderful place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More  When I looked at the specifications for your notebook, I noted it came with FreeDOS 2.0.HP 15-r203TX Notebook PC Product Specifications  I see you have formatted the drive and installed Windows 8.1. You have installed drivers but the Intel chipset drive produced the error saying "saying "please plug the device : device not found", and no driver was located for the network adapter. Where did you acquire your drivers from? As you are unable to access the network from your notebook I suggest you try to download and save the driver files from the official HP page,to USB stick or CD/DVD to be able to install them. Here is link to the HP Notebook - 15-r203tx page, follow the links to display the drivers.  To say thanks for replying please click the thumbs up button below. If this resolved your difficulty, please let other people know by choosing solution provided.  Good Luck!

X120e display driver not responding. HELP!!!

Hello, all. New to the forum. I have a ThinkPad X120e (0596-2RU) with Windows 7 and the display adapter (AMD Radeon HD 6310 Graphics). Whenever the
-CPU is placed to sleep with a youtube video in pause and I replay it after I cut it on again
-when I am using internet explorer (when I watch videos or not)
the screen will go black and at the bottom it will say "display driver stopped responding and has fully recovered". If I watch a video again after this, it takes me to a blue screen. I know this is a popular problem but no one online has exact answers for x120e computers. So can anyone please help me with this!!??
-Also: I do have extra memory chips. If I install them, will my problem be fixed?
-And I do apologize for the terminology in this paper. I am not that knowledgeable with computers.

Use >>this<<
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (302.rar) and put the included file (TV277MH.302) on that stick.
Rename TV277MH.302 to 302.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 302.rom [ENTER] and let it flash the vbios.

Sound Blaster SE, driver not install

Hi, I just went out and bought Sound Blaster SE and installed it on my computer. But, no sound... so I uninstalled it fully and came here and downloaded the newest driver, I installed it and still.. no sound. So I came here and followed all of the guides and STILL NO SOUND! So I went into DxDiag and checked DirectSound and this is what is shows:
[img"]http://i7.photobucket.com/albums/y278/Jamlpr/DxDiag.png[/img]
After running the test directsound button I get this:
[img"]http://i7.photobucket.com/albums/y278/Jamlpr/DxDiag2.png[/img]
Note the (No Driver).. odd seeing how it says 3 inches above this that I do infact have a driver installed..
I have onboard sound disabled and I have pcspeaker disabled. I'm running Windows XP Professional. The "no WHQL" wasn't there when I installed the driver via CD, but I still had the same (No Driver) issue.. so I don't think it is that.
If I can recieve ANY help, It will be much appreciated. I would just like to have working sound!

Sorry to double post, but I have heard that reinstalling Xp Pro will fix this problem, but I do not have the CDs anymore.. and I can't shell out the money to buy it again (that's why I got SE, it's cheap). Is there any other fix?

R9 280X Display driver not responding and has recovered error

Hi,
My new R9 280X OC Edition causes "Display driver is not responding and has recovered..." error. After this error, my game would hang. It also caused internet browser to crash.
It has been very frustrating, after 10 minutes of game play, the game would just crash. I have tried many way to try to solve the problem without success
I have.
1) Over clock/ lower the graphic card clock
2) install/reinstall latest ATI release/beta driver, reverted to driver that come with installation disk
3) update my motherboard bios
4) reinstalled windows 7
My PC Spec is
Windows 7 32 bit
4G RAM
Intel Core i5-2500K @ 3.3 GHZ
Any help would be appreciated. Thanks.

Use >>this<<
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (302.rar) and put the included file (TV277MH.302) on that stick.
Rename TV277MH.302 to 302.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 302.rom [ENTER] and let it flash the vbios.

Upgrade to windows 10, display driver not work

the issue is video card has no working driver detect. I can't get error code ,because teh screen is not display any thing.I am sure the computer is boot up, as it can be access by teamviewer and show a 640x480 screen. currently , I am using miscrosoft default display driver . instead of intel and AMD driver. to show 1024x168 screen , at least I can see someting now... and the fan is screaming .. my product type is HP Pavilion dv4-3126tx QG429PA#AB2 display card is Intel HD Graphics 3000 and AMD radeon 6600m and 6800m (not sure excatly, may be 6750M) I am running windows 10 64bit much thanks

all solution I have tried , but not work not working driver include - the windows update give a driver from 2015 july 15 - Radeon (TM) HD 6750M ver 9.0.0.0 2012/8/15 - AMD Radeon 6600M and 6700M series ver 15.200.1046.2 2015/7/15- AMD 12.10 DriverVer=09/27/2012, 9.002.0.0000- AMD 15.6 DriverVer=06/19/2015, 14.502.1014.1001- AMD 15.7 DriverVer=07/15/2015, 15.200.1062.1002- intel(R) HD Graphics 3000 ver: 9.17.10.4101 2015/1/30- intel(R) HD Graphics 3000 ver: 9.17.10.4229 2015/5/26- intel(R) HD Graphics 3000 ver: 9.17.10.4229 2015/5/27 do I need to install both intel graphic deriver seperatly ? the old win7 and win8 driver tell me , not install intel graphic driver , I must instal AMD driver which include intel already.......

W540 FaceTime HD Camera (Display) Driver Not Installed

Similar Messages

Maybe you are looking for