W540 Hardware scan video card warning
I ran a hardware scan for my W540 and got a warning in the stress test for my video cardResult code: WVC00F000-WK7B0Gwhat does it mean? Thanks,Jonathan Darel
what is the normal temp?
Similar Messages
-
Hardware scan "warning" on new nvidia card
Hi,
Im on a new E431, win7 64-bit, with a NVIDIA GeForce GT 740M GPU.
Running a hardware scan gives a warning for this card in regards to the "Stress test". Result code is: WVC00R000-UJ8ZWI.
Anyone have a similar problem or able to shed some light on what this could mean? Research has come up with nothing, and LSC gives no hints as to what this implies.
Many thanks,
NicAnyone?
-
Windows 7 - Pci-to-Pci Bridge (Error: Code 10) - PCI Video Card
Before I state my issues I will list what I'm running and what I'm trying to accomplish.
I'm running Windows 7 Enterprise 64-bit edition, not the Beta or RC. I have 3 video cards in my possession (listed below).
- (PCIe) Evga GTX260
- (PCI) Evga 9400GT
- (PCI) Evga Fx5500
Out of those 3 cards I only use the GTX260 and the 9400GT. I had to 'retire' the Fx5500 because the latest WHQL (certified) drivers only provide support as far down as the "6 series" Nvidia cards. Unfortunately the Fx5500 is a "5 series" and falls below that line. I have already tried to use the GTX260 and Fx5500 in previous versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same make of video card - you'll get nothing but errors. There is the option of going to a place like guru3d.com and downloading a custom supported driver that covers both the GTX260 and Fx5500, but the drivers are not certified and lack support. Therefore, I purchased and now use the 9400GT which is covered under the drivers for the GTX260 and eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.
Now that you have some background info here is my issue Whenever I install the 9400GT I get a second 'pci-to-pci bridge' entry (the other entry has no errors) that shows up under 'System Devices' in the Device Manager. The second pci-to-pci bridge entry has a yellow triangle with an exclamation mark on it that refers to a problem. When you check the properties of this device it more or less says that Windows has detected a problem (Error Code 10). The GTX260 still works and even shows up under the 'Display Adapters' as a GTX260, but no entry for the 9400GT exists. I have tried the 9400GT in both PCI slots and each time it does the same thing. If I pull out the GTX260 and ONLY run the 9400GT, I still get the pci-to-pci bridge issue, BUT I do get a picture and can boot into Windows 7 without a hitch. When I do this there is still nothing listed under the 'Display Adapters' as a 9400GT or even a VGA compatible device.
After messing around with this for 10 hours (yes, I said 10 hours) I decided to dig out my retired PCI video card (the Fx5500). When I installed this card I had no 2nd pci-to-pci bridge entry appear under 'System Devices', and the one that was listed had no yellow triangle or error codes. I then checked under 'Display Adapters' and Windows 7 had recognized it as a VGA compatible device and was asking for drivers.
I have now concluded that there is definitely no issue with the motherboard or any of my hardware (including video cards). At first EVGA Support and I had suspected that the motherboard may be bad because of all of the pre-diagnostic steps I had taken during my 10 hour ordeal. I'm not going to list everything I did because it would literally take 3 hours to type it all in. Just believe me when I say that I have tried most things including but not limited to the latest bios updates (flashed 4 times and completely reset to ensure accuracy), custom IRQ management, entire OS re-installation X2, multiple/latest chipset drivers installed, multiple/latest video drivers installed, memtest testing, complete hardware teardown and re-build (adding one device at a time), and MUCH more. The only thing I did not try was installing a different OS other than Windows 7 64-bit to see if I could replicate the issue. This is a waste of time though because lets say that I install Windows XP Pro and the 9400GT doesn't have this issue... Well, that's great, but who gives a damn about XP Pro when I have been using it for the last 9 years and when I have a full version of Windows 7 that I want to use? I'm certainly not going to run XP Pro over Windows 7 just to use this PCI video card. Second, if I install XP Pro and it still gives me the same pci-to-pci bridge error then again, I've only wasted more time because if its not going to work in either OS then Im sure as hell not going to leave XP Pro installed when I can use Windows 7.
Thanks,
piyushMaybe stupid question now but has your posting anything to do with Toshiba and Toshiba notebooks?
-
I wasn't sure where to put this, but I guess it's a newbie question.
I have Arch installed on my USB pen drive. It will therefore be taken around on different computers with different hardware - including video cards.
I figured that I basically had two choices:
1. Install some very general drivers that work with basically anything
2. Install many specialized drivers
For #1 I guess Vesa will do, but it won't give me a lot of eye-candy. I believe alsa is quite general so I won't need anything else for sound?
My question is related to #2. Is it a good idea to have many drivers installed? Can they all be installed at the same time?
I would appreciate if anyone had some advice for me here, not only for video cards, but also for other hardware, like printers.I dont think mixing two video drivers like nvidia and ATI is recommended. Use the VESA driver and for printers it's also different , most sound cards support ALSA.
-
Apple Multiple Scan 1705 - usable with modern video cards?
I still have an old Apple Multiple Scan 1705 display which I've been using continuously since ~1995. Even though I don't have a Mac anymore (I know, I know, mea culpa), I hooked it up to my PC and it has worked great. But, I recently received a newer hand-me-down PC from my sibling. It didn't come with a monitor, but I thought that would be OK as I could just switch the monitor from my old system to the new system.
As it turns out, it's not that easy. When I boot it up, the monitor goes blank after POST, usually between the XP screen and the welcome screen. Sometimes I can actually get as far as seeing the desktop, but the screen usually goes blank before I can navigate anywhere. It works fine in safe mode, though. From what I've read on the Web, this would appear to be an "infinite loop" problem, where the OS and the video card stop speaking to each other.
I may be on a fool's errand here, trying to combine a PC video card (an NVIDIA GeForce 7600 GS) with an Apple monitor which is ten years older than it. I've done some basic troubleshooting, such as reinstalling the video card drivers and visually inspecting the hardware and connections. But I wonder if it is even possible for the two to communicate properly. For the record, I'm running Windows XP SP3. Has anyone else been foolish enough to try this?
My girlfriend hates the bulkiness of this old CRT monitor and wants to get a flat panel anyway, but while I save up for that, it would be nice to be able to use the new computer with the old monitor. Even if it won't work, I've gotten 13 years of use out of the monitor, so I certainly got my money's worth. But I thought I'd check with the community and see if there's any life left in the old display.
Thanks for your help!In Windows XP, in order to change the resolution for the monitor, you have to right-click on the desktop and select "Properties". This bring up "Display Properties". From there, you click the "Settings" tab. This gives you some basic options. For a wider selection of resolutions and refresh rates, click on the "Advanced" button. Then select the "Adapter" tab and press the "List All Modes" button. This lists all the available configurations for resolution, refresh rate, and colors. I fiddled around with these, trying all of the configurations that were supposed to work according to the Apple Multiple Scan 1705 specs. Unfortunately, anything other than VGA 640x480 60Hz would cause a "blue screen of death".
My girlfriend had indicated that she wanted to get a flat panel display anyway (to get back some of that desk real estate), so I decided to cut my losses and buy a new monitor. Unfortunately, I now have the exact same problem with the new monitor. So, it seems the problem is not with the monitor after all. Or, at the least, that's not the only problem. Once I resolve what other hardware/software issue is going on, I'll see if the 1705 display will work. But for practical purposes, you can consider this question resolved.
Thanks for entertaining my obscure question. -
Cs5 compatible laptop video cards with hardware acceleration
Is there a list or does anyone know of laptops with compatible video cards for cs5 hardware acceleration? This would be for a windows 7 64bit system.'
Thanks!its not so much a space issue as a power issue, but space is a concern too. I suppose I was looking for a list of laptop compatible cs5 cards. I know that there are cards out there that are and it would be wonderful if adobe compiled a list like they have for standard video cards. And yes you are right, a lot of the video cards listed on that page also have mobile counterparts but are not always compatible since they use different drivers.
Does anyone have laptop experience with getting full hardware acceleration support?
Thanks. -
Bad video card or driver/hardware incompatibility?
I have not had a problem with stability on my main computer until I purchased an MSI GeForce4 Ti4600. I have in the past operated this computer for over a week without reboot or shut down with little problem.
With this new card, I can no longer play any game that contains 3D graphics. When using Windows XP for the exclusive purpose of 2D graphics, it is fairly stable. Once I try doing anything 3D intensive, I will almost immediately lock up, get a "blue screen of death" with a variety of messages including "hardware failure", or get a distorted image followed by one of the two previous listed actions. I have been trying different software configurations over the past week with no success. I have tried using Windows 2000, every combination of drivers I can find/think of, and 3 different version of motherboard bios.
The stats on the computer I have been mentioning are as follows:
Tyan S2460 motherboard
2 x AMD Athlon MD 1600+
2 x 256MB PC2100 DDR Ram
IBM 60GB 7500RPM harddrive
400Watt power supply
I initially thought that it was a hardware conflict so I decided, yesterday, to try the video card on my old machine. I had the exact same problems.
Stats on the second machine:
600MHz Athlon
Gigabyte 7IX motherboard
125MB Ram
250 Watt power supply
I would like to get some input before I decide what my next step is.I plan on trying it; however, I am not looking forward to exchanging power supplies. :P Have already put a weeks worth of work into it.
I don't think it is over heating. I am a cooling freak. For example, I water cool my main system (the cooling is externally powered thus lowering the strain on my p/s), excluding the video card, even though nothing is overclocked. ATM, my video card has a large fan positioned right next to it for the sole purpose of helping the factory fan/heatsink do their job. After the lock-ups, i have physically checked the card's temperature, and it seemed to be staying quite cool. -
I had problems with Aperture 3.4.1. It was telling me that my video card isn't supported. Funny thing is I was using it earlier today. I trashed the application and downloaded it again. Now it hangs up and won't load or I get the occasional note that the graphics card doesn't meet requirements.
All,
One last trip to the well today and seems llike it is resolved. The end fix was to create a new user account and then drag my data over from my existing user account. It seems that there was something within my existing user library that was currupting Aperture causing it to fail to at launch. Couldn't figure out what exactly, but this seems to have done the trick. Now i have been working for the better part of the day in a stable manner. I will update in another day assuming all is well. Good luck if you have this problem it is a total pain in the a**. -
Failed Hardware Scan and other issues E440
Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description Symptom
IMAGE Replaced due to engineering change
System board Network card error
Hard disk drive Network card error
ECA-WIRELESS <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP. -
Fglrx not finding my video card
holla balloj!
vid card: ATI radeon X850XT on a x86_64
Uncommonly enough i have some ati drivers that doesn't wanna do what i tell em to do. And it seem to be the fglrx module that cant find my card and then the fglrx(0) shows up and it seem like my dear X buddy is loading the vesa driver and thus i can't watch the one and only season of Firefly in a druuling 720p quality.
Please help me see Firefly in 720p
(and switch desktops without 2 secs delays etc etc (including to play a number of pc games))
Xorg.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "AllowEmptyInput" "0"
EndSection
Section "Files"
EndSection
Section "Module"
Load "freetype"
# Load "xtt"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "dvorak"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 90.0
VertRefresh 50.0 - 70.0
EndSection
Section "Device"
Identifier "Card0"
Driver "fglrx"
Card "** ATI Radeon (generic) [radeon]"
BusID "PCI:5:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1600x1200" "1280x1024" "1024x768"
EndSubSection
EndSection
And the log!
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH x86_64
Current Operating System: Linux juppaCom 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:13:30 UTC 2008 x86_64
Build Date: 17 December 2008 10:46:49PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 28 02:42:13 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "AllowEmptyInput" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7b54e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@5:0:0) ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Primary) rev 0, Mem @ 0xd0000000/268435456, 0xfd7f0000/65536, I/O @ 0x00006c00/256, BIOS @ 0x????????/131072
(--) PCI: (0@5:0:1) ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Secondary) rev 0, Mem @ 0xfd7e0000/65536
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX disabled
(WW) fglrx: Force AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 05@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561
(II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:56:52
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(WW) fglrx: No matching Device section for instance (BusID PCI:0@5:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x5D52) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@5:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x181c200
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[22] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 5 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "RADEON X850 XT" (Chipset = 0x5d52)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0b12)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfd7f0000
(--) fglrx(0): I/O port at 0x00006c00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.7
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2003, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R480
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) fglrx(0): Using adapter: 5:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000001, disabled=0x00000000
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PHL Model: e01e Serial#: 717343
(II) fglrx(0): Year: 2005 Week: 3
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max Image Size [cm]: horiz.: 36 vert.: 27
(II) fglrx(0): Gamma: 2.96
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): GTF timings supported
(II) fglrx(0): redX: 0.631 redY: 0.329 greenX: 0.276 greenY: 0.600
(II) fglrx(0): blueX: 0.143 blueY: 0.057 whiteX: 0.283 whiteY: 0.297
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 720x400@88Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #1: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) fglrx(0): #3: hsize: 1920 vsize 1440 refresh: 60 vid: 16593
(II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 65 vid: 17833
(II) fglrx(0): #6: hsize: 1280 vsize 960 refresh: 85 vid: 22913
(II) fglrx(0): #7: hsize: 1600 vsize 1200 refresh: 70 vid: 19113
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 202.0 MHz Image Size: 360 x 270 mm
(II) fglrx(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) fglrx(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) fglrx(0): Serial No: CX 717343
(II) fglrx(0): Monitor name: PHILIPS 109B6
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 97 kHz, PixClock max 230 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff00410c1ee01ff20a00
(II) fglrx(0): 030f010368241bc4ef9ea8a154469924
(II) fglrx(0): 0e484cffef80455961598199d140a940
(II) fglrx(0): a9458159a94ae84e403062b0324040c0
(II) fglrx(0): 1300680e1100001e000000ff00204358
(II) fglrx(0): 20203731373334330a20000000fc0050
(II) fglrx(0): 48494c495053203130394236000000fd
(II) fglrx(0): 0032a01e6117000a2020202020200006
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 520/540MHz @ 0Hz [enable load balancing]
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 27 modes found for primary display.
(--) fglrx(0): Virtual size is 1600x1200 (pitch 0)
(**) fglrx(0): *Mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 (75.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +vsync (55.9 kHz)
(**) fglrx(0): Default mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync (65.3 kHz)
(**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x47.0 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync (43.0 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): Default mode "960x720": 55.9 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "960x720"x60.0 55.85 960 1008 1104 1248 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "864x648": 45.1 MHz (scaled from 0.0 MHz), 40.2 kHz, 60.0 Hz
(II) fglrx(0): Modeline "864x648"x60.0 45.08 864 904 992 1120 648 649 652 671 +hsync (40.2 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 577 580 597 +hsync (35.8 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(--) fglrx(0): Display dimensions: (360, 270) mm
(--) fglrx(0): DPI set to (112, 112)
(--) fglrx(0): Virtual size is 1600x1200 (pitch 1600)
(**) fglrx(0): *Mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 (75.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +vsync (55.9 kHz)
(**) fglrx(0): Default mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync (65.3 kHz)
(**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x47.0 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync (43.0 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): Default mode "960x720": 55.9 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "960x720"x60.0 55.85 960 1008 1104 1248 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "864x648": 45.1 MHz (scaled from 0.0 MHz), 40.2 kHz, 60.0 Hz
(II) fglrx(0): Modeline "864x648"x60.0 45.08 864 904 992 1120 648 649 652 671 +hsync (40.2 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 577 580 597 +hsync (35.8 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 4.1
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000b
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [pcie] 262144 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Interrupt handler installed at IRQ 18.
(II) fglrx(0): Exposed events to the /proc interface
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[22] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(II) fglrx(0): detected X.org 7.4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:5:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0x7fd22f841000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.56.4
(II) fglrx(0): Date: Dec 1 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.27-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x00960000
(II) fglrx(0): FBMM initialized for area (0,0)-(1600,1536)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1200) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1600 x 336
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
24 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "dvorak"
(**) Keyboard0: XkbLayout: "dvorak"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) Mouse0: ps2EnableDataReporting: succeeded
output of lspci
05:00.0 VGA compatible controller: ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Primary)
05:00.1 Display controller: ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Secondary)
Ive tried telling my dear drivers where the graph card is by extracting the info from lspci and put in
"PCI:5:0:0"
But that doesn't seem to help (and 5:0:1 makes the X go bananas and refuse to start, but i have no idea why i have two of them pci busses occupied by me video card according to pciutils)
Then i realize that the fglrx module probably do find the bus! Just not a device to match with it (that's what the log sais), so after some searching i found something about that maybe the device identifier wasn't created in the /dev dir (/dev/dri/<device identifier>) But of what i could list it actully where there under the name of card0 wich i assumed the card identifier had to be named aswell, but after changing that... no dice. And it seemes like the vesa driver finds the device .
It is for me admitingly weird that when loading the vesa driver Ce X finds my card under /dev/dri/card0 But not from the begging with the "ati-driver"
I reasently switched from debian, after switching from gentoo, after switching from ubuntu. And i remembered that the stable ati driver for the x850xt card didnt work with debians new kernel (!) so had to use the one from the test branch... But trying that here on arch (using the 8.12-2 driver) didnt work either. And unfortunally i cant find the info again on what driver the debian ppl had modified that did and did not work.
It feels like there is some minor fault i myself overlooked the past 3 days, so hope that providing this information to you might make a bell ring out there for someone.
Juppa
PS! hope i didnt confuse you to much, im abit confused by the log and the texts ive read, apparently fglrx is the ati module and catalyst is the driver, but you are sposed to put fglrx as driver in the xorg.conf so it must be the driver? And accorinding to the log it involves the fglrx eh... module when loading the vesa driver, or is the log just telling me that the fglrx module/driver has been disabled (fglrx(0)) and that they went on trying with the vesa driver/module instead?In order to be viewed on the iPhone, YouTube is transcoding all their content to H.264. The initial announcement said- They'll have 10,000 videos ready by June 29th, and should complete transcoding the collection by this fall.
Since there are literally hundreds of thousands of YouTube videos out there (if not more), they just haven't gotten to transcoding your video yet (doing their Most Viewed videos first). -
NVIDIA Issues; hitting the video card hangs the machine
Hello everybody, this could easily be placed under the Kernel and Hardware forum, but this one suits my experience level better. I tried
searching for some similar issues to what I am having, but wasn't able to come up with anything. (Perhaps I was an unknown keyword off in my searches. )
Additionally, thanks in advance for any help! I'm pretty much out of ideas short of replacing some hardware.
My problem is that whenever my desktop displays anything that is graphically intensive, it freezes. I first experienced this while I had Slackware 13.1 installed when trying to run Minecraft. I had been running it successfully for a month or two when it hung while I was playing. I switched over to Arch in the hopes that it would be easier for me to troubleshoot the problem. This was a few months ago, and I've not been able to figure it out.
I'm running with an i7 930 CPU, GTX 480 video card, and six gigs of RAM. My xorg.conf is below:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.41.06 ([email protected]) Mon Apr 18 15:14:00 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
I dug through my logs and the only strange thing I found was in kernel.log:
Jul 3 13:56:43 localhost kernel: [ 101.297777] NVRM: GPU at 0000:03:00.0 has fallen off the bus.
For what it's worth, here is my Xorg.0.conf (but the only error is related to my keyboard, which actually works fine):
[ 28.765]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 28.766] X Protocol Version 11, Revision 0
[ 28.766] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 28.766] Current Operating System: Linux myhost 2.6.39-ARCH #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011 x86_64
[ 28.766] Kernel command line: root=/dev/disk/by-uuid/53882ab2-b171-4117-a8a2-6ec984ace8e2 ro
[ 28.767] Build Date: 30 May 2011 08:18:15AM
[ 28.767]
[ 28.767] Current version of pixman: 0.22.0
[ 28.767] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.768] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.770] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 3 14:20:49 2011
[ 28.800] (==) Using config file: "/etc/X11/xorg.conf"
[ 28.801] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 28.817] (==) ServerLayout "Layout0"
[ 28.817] (**) |-->Screen "Screen0" (0)
[ 28.817] (**) | |-->Monitor "Monitor0"
[ 28.817] (**) | |-->Device "Device0"
[ 28.817] (**) |-->Input Device "Keyboard0"
[ 28.817] (**) |-->Input Device "Mouse0"
[ 28.817] (==) Automatically adding devices
[ 28.817] (==) Automatically enabling devices
[ 28.837] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.837] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.837] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.857] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 28.857] Entry deleted from font path.
[ 28.857] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 28.857] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 28.857] Entry deleted from font path.
[ 28.858] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 28.858] (==) FontPath set to:
/usr/share/fonts/misc/
[ 28.858] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.858] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 28.858] (WW) Disabling Keyboard0
[ 28.858] (WW) Disabling Mouse0
[ 28.858] (II) Loader magic: 0x7d3440
[ 28.858] (II) Module ABI versions:
[ 28.858] X.Org ANSI C Emulation: 0.4
[ 28.858] X.Org Video Driver: 10.0
[ 28.858] X.Org XInput driver : 12.2
[ 28.858] X.Org Server Extension : 5.0
[ 28.859] (--) PCI:*(0:3:0:0) 10de:06c0:10de:075f rev 163, Mem @ 0xdc000000/33554432, 0xc8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000df00/128, BIOS @ 0x????????/524288
[ 28.859] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 28.859] (II) LoadModule: "extmod"
[ 28.878] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.889] (II) Module extmod: vendor="X.Org Foundation"
[ 28.889] compiled for 1.10.2, module version = 1.0.0
[ 28.889] Module class: X.Org Server Extension
[ 28.889] ABI class: X.Org Server Extension, version 5.0
[ 28.889] (II) Loading extension MIT-SCREEN-SAVER
[ 28.889] (II) Loading extension XFree86-VidModeExtension
[ 28.889] (II) Loading extension XFree86-DGA
[ 28.889] (II) Loading extension DPMS
[ 28.889] (II) Loading extension XVideo
[ 28.889] (II) Loading extension XVideo-MotionCompensation
[ 28.889] (II) Loading extension X-Resource
[ 28.889] (II) LoadModule: "dbe"
[ 28.889] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.890] (II) Module dbe: vendor="X.Org Foundation"
[ 28.890] compiled for 1.10.2, module version = 1.0.0
[ 28.890] Module class: X.Org Server Extension
[ 28.890] ABI class: X.Org Server Extension, version 5.0
[ 28.890] (II) Loading extension DOUBLE-BUFFER
[ 28.890] (II) LoadModule: "glx"
[ 28.890] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29.187] (II) Module glx: vendor="NVIDIA Corporation"
[ 29.195] compiled for 4.0.2, module version = 1.0.0
[ 29.195] Module class: X.Org Server Extension
[ 29.195] (II) NVIDIA GLX Module 275.09.07 Wed Jun 8 14:34:43 PDT 2011
[ 29.195] (II) Loading extension GLX
[ 29.195] (II) LoadModule: "record"
[ 29.195] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 29.196] (II) Module record: vendor="X.Org Foundation"
[ 29.196] compiled for 1.10.2, module version = 1.13.0
[ 29.196] Module class: X.Org Server Extension
[ 29.196] ABI class: X.Org Server Extension, version 5.0
[ 29.196] (II) Loading extension RECORD
[ 29.196] (II) LoadModule: "dri"
[ 29.196] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 29.207] (II) Module dri: vendor="X.Org Foundation"
[ 29.207] compiled for 1.10.2, module version = 1.0.0
[ 29.207] ABI class: X.Org Server Extension, version 5.0
[ 29.207] (II) Loading extension XFree86-DRI
[ 29.207] (II) LoadModule: "dri2"
[ 29.207] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.207] (II) Module dri2: vendor="X.Org Foundation"
[ 29.207] compiled for 1.10.2, module version = 1.2.0
[ 29.207] ABI class: X.Org Server Extension, version 5.0
[ 29.207] (II) Loading extension DRI2
[ 29.207] (II) LoadModule: "nvidia"
[ 29.208] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 29.240] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 29.241] compiled for 4.0.2, module version = 1.0.0
[ 29.241] Module class: X.Org Video Driver
[ 29.246] (II) NVIDIA dlloader X Driver 275.09.07 Wed Jun 8 14:18:12 PDT 2011
[ 29.246] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 29.246] (--) using VT number 7
[ 29.255] (II) Loading sub module "fb"
[ 29.255] (II) LoadModule: "fb"
[ 29.255] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.262] (II) Module fb: vendor="X.Org Foundation"
[ 29.262] compiled for 1.10.2, module version = 1.0.0
[ 29.262] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.262] (II) Loading sub module "wfb"
[ 29.262] (II) LoadModule: "wfb"
[ 29.262] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 29.270] (II) Module wfb: vendor="X.Org Foundation"
[ 29.270] compiled for 1.10.2, module version = 1.0.0
[ 29.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.270] (II) Loading sub module "ramdac"
[ 29.270] (II) LoadModule: "ramdac"
[ 29.270] (II) Module "ramdac" already built-in
[ 29.271] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 29.271] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 29.271] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.272] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 29.272] (==) NVIDIA(0): RGB weight 888
[ 29.272] (==) NVIDIA(0): Default visual is TrueColor
[ 29.272] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.069] (II) NVIDIA(GPU-0): Display (AOC 2436 (CRT-1)) does not support NVIDIA 3D Vision
[ 30.069] (II) NVIDIA(GPU-0): stereo.
[ 30.070] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 480 (GF100) at PCI:3:0:0 (GPU-0)
[ 30.070] (--) NVIDIA(0): Memory: 1572864 kBytes
[ 30.070] (--) NVIDIA(0): VideoBIOS: 70.00.21.00.02
[ 30.070] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 30.070] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 30.070] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 480 at PCI:3:0:0
[ 30.070] (--) NVIDIA(0): AOC 2436 (CRT-1)
[ 30.071] (--) NVIDIA(0): AOC 2436 (CRT-1): 400.0 MHz maximum pixel clock
[ 30.109] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 30.109] (==) NVIDIA(0):
[ 30.109] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 30.109] (==) NVIDIA(0): will be used as the requested mode.
[ 30.109] (==) NVIDIA(0):
[ 30.109] (II) NVIDIA(0): Validated modes:
[ 30.109] (II) NVIDIA(0): "nvidia-auto-select"
[ 30.110] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 30.134] (--) NVIDIA(0): DPI set to (93, 94); computed from "UseEdidDpi" X config
[ 30.134] (--) NVIDIA(0): option
[ 30.134] (--) Depth 24 pixmap format is 32 bpp
[ 30.134] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 30.134] (II) NVIDIA: access.
[ 30.144] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 30.144] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 30.144] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 30.144] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 30.144] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 30.144] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 30.144] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 30.144] (II) NVIDIA(0): Config Options in the README.
[ 30.147] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 30.208] (II) Loading extension NV-GLX
[ 30.270] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 30.270] (==) NVIDIA(0): Backing store disabled
[ 30.270] (==) NVIDIA(0): Silken mouse enabled
[ 30.271] (**) NVIDIA(0): DPMS enabled
[ 30.271] (II) Loading extension NV-CONTROL
[ 30.271] (II) Loading extension XINERAMA
[ 30.271] (II) Loading sub module "dri2"
[ 30.271] (II) LoadModule: "dri2"
[ 30.271] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.272] (II) Module dri2: vendor="X.Org Foundation"
[ 30.272] compiled for 1.10.2, module version = 1.2.0
[ 30.272] ABI class: X.Org Server Extension, version 5.0
[ 30.272] (II) NVIDIA(0): [DRI2] Setup complete
[ 30.272] (==) RandR enabled
[ 30.272] (II) Initializing built-in extension Generic Event Extension
[ 30.272] (II) Initializing built-in extension SHAPE
[ 30.272] (II) Initializing built-in extension MIT-SHM
[ 30.272] (II) Initializing built-in extension XInputExtension
[ 30.272] (II) Initializing built-in extension XTEST
[ 30.272] (II) Initializing built-in extension BIG-REQUESTS
[ 30.272] (II) Initializing built-in extension SYNC
[ 30.272] (II) Initializing built-in extension XKEYBOARD
[ 30.272] (II) Initializing built-in extension XC-MISC
[ 30.272] (II) Initializing built-in extension SECURITY
[ 30.272] (II) Initializing built-in extension XINERAMA
[ 30.272] (II) Initializing built-in extension XFIXES
[ 30.272] (II) Initializing built-in extension RENDER
[ 30.272] (II) Initializing built-in extension RANDR
[ 30.272] (II) Initializing built-in extension COMPOSITE
[ 30.272] (II) Initializing built-in extension DAMAGE
[ 30.273] (II) Initializing extension GLX
[ 30.487] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 30.487] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.487] (II) LoadModule: "evdev"
[ 30.499] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.506] (II) Module evdev: vendor="X.Org Foundation"
[ 30.506] compiled for 1.10.0, module version = 2.6.0
[ 30.506] Module class: X.Org XInput Driver
[ 30.506] ABI class: X.Org XInput driver, version 12.2
[ 30.506] (II) Using input driver 'evdev' for 'Power Button'
[ 30.506] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.506] (**) Power Button: always reports core events
[ 30.506] (**) Power Button: Device: "/dev/input/event1"
[ 30.530] (--) Power Button: Found keys
[ 30.530] (II) Power Button: Configuring as keyboard
[ 30.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 30.530] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.530] (**) Option "xkb_rules" "evdev"
[ 30.530] (**) Option "xkb_model" "evdev"
[ 30.530] (**) Option "xkb_layout" "us"
[ 30.561] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 30.561] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.561] (II) Using input driver 'evdev' for 'Power Button'
[ 30.561] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.561] (**) Power Button: always reports core events
[ 30.561] (**) Power Button: Device: "/dev/input/event0"
[ 30.583] (--) Power Button: Found keys
[ 30.583] (II) Power Button: Configuring as keyboard
[ 30.583] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 30.583] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.583] (**) Option "xkb_rules" "evdev"
[ 30.583] (**) Option "xkb_model" "evdev"
[ 30.583] (**) Option "xkb_layout" "us"
[ 30.590] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event4)
[ 30.590] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.590] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 30.591] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.591] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 30.591] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event4"
[ 30.623] (--) Logitech Logitech Illuminated Keyboard: Found keys
[ 30.623] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 30.623] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.0/input/input4/event4"
[ 30.623] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD)
[ 30.623] (**) Option "xkb_rules" "evdev"
[ 30.624] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event5)
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.624] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 30.624] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event5"
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found relative axes
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found keys
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.1/input/input5/event5"
[ 30.650] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD)
[ 30.650] (**) Option "xkb_rules" "evdev"
[ 30.650] (**) Option "xkb_model" "evdev"
[ 30.650] (**) Option "xkb_layout" "us"
[ 30.650] (EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes.
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: initialized for absolute axes.
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 30.651] (II) config/udev: Adding input device Microsoft Microsoft Optical Mouse with Tilt Wheel (/dev/input/event6)
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: Applying InputClass "evdev pointer catchall"
[ 30.651] (II) Using input driver 'evdev' for 'Microsoft Microsoft Optical Mouse with Tilt Wheel'
[ 30.651] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: always reports core events
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: Device: "/dev/input/event6"
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found 9 mouse buttons
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found scroll wheel(s)
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found relative axes
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found x and y relative axes
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: Configuring as mouse
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: Adding scrollwheel support
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: YAxisMapping: buttons 4 and 5
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.0/input/input6/event6"
[ 30.676] (II) XINPUT: Adding extended input device "Microsoft Microsoft Optical Mouse with Tilt Wheel" (type: MOUSE)
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: initialized for relative axes.
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) keeping acceleration scheme 1
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration profile 0
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration factor: 2.000
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration threshold: 4
[ 30.677] (II) config/udev: Adding input device Microsoft Microsoft Optical Mouse with Tilt Wheel (/dev/input/mouse0)
[ 30.677] (II) No input driver/identifier specified (ignoring)
[ 30.677] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 30.677] (II) No input driver/identifier specified (ignoring)
[ 30.680] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 30.680] (II) No input driver/identifier specified (ignoring)
The more I investigate, the more I feel like this could be a hardware problem. I checked the CPU temp first, but it only reaches ~32 degrees celsius when the system hangs, so I doubt that's the cause. I've checked the cables (power and otherwise) between everything in my box, and it's all solid. I've also taken the sides off, thinking it my be an air flow issue, but that didn't solve it either.
On the software side of things, I've got nvidia, nvidia-utils, and lib32-nvidia-utils installed and they aren't popping any errors that I can see. When I run glxinfor or glxgears, nothing happens, the terminal just prompts me for input (which is actually an improvement, in Slackware, they hung the machine).
Again, any help on this issue is greatly appreciated, I'm at my wit's end about it.I had a similar problem that turned out to be the graphics card working itself loose. So, if you haven't already, try taking it out, cleaning the contacts and plugging it back in. Worth a try and worked for me
Also, Xorg 1.10.2 & the nvidia proprietary driver don't seem to be in conflict for me so I think williewillus is mistaken. -
My 27" iMac will not boot in normal mode. The screen stays white. The computer will boot in safe mode. Could this be virus related or is it possibly an issue with my video card. Before this happened, my computer screen was flashing weird things and the computer would unexpectedly power down.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' sub(/ :/,"");{ print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
PS CS5 workaround to non compliant Shader3.x/OpenGL 2.0 video cards
Stumbled upon a possible workaround for those who want to use some of the latest CS5 PhotoShop enhancements such as 3D effects and Repoussee which is worth sharing. Background.... home workstation is a i7-920 Windows 7 Ultimate 64-bit o/s with modest NVidia GTS250 which is fully hardware compliant Shader 3.x and OpenGL 2.0 however my company issued laptop used for traveling demo's is a standard Dell Latitude D620 with non compliant Intel GPU which was unable to create simple 3D effects with any invoked PhotoShop graphic. Each of the 3D effects from the PhotoShop CS5 pull downs were grayed out and verified as a non compliant via Edit --> Preferences -->Performance on the Dell D620. Finally had time to create a simple "down and dirty" 3D graphic using either the predefined hat or can 3D effect composed on the i7-920 Windows 7 Ultimate 64-bit o/s then saved as a file type PSD to a flash drive.
Open the same created file on my Dell D620, got a warning message the built in GPU on the Dell D620 was non compliant hardware hence rendering would be via software (versus video hardware). The 3D can opened on the Dell but more importantly I was able to successfully perform edits. Long story short you might be able to circumvent non compliant video card issues by opening a saved 3D PSD file which will render/edit on non-compliant GPU's. BTW, my D620 is 32-bit Windows XP Professional SP3. If others can try my premise and feed back to this forum it would prove beneficial to all the members in this forum. Can anyone validate this on say laptops other than a Dell D620 and Dell E6410? I suspect once you call in a 3D PSD file composed on a non-compliant platform, it toggles a PhotoShop "on" bit to enable 3D software rendering. Talk about being stoked on this exerciseForgot to mention you still have to have CS5 installed on your non-compliant laptop. Wouldn't it be funny if this is a PS bug requiring a toggled bit to be set in order to render in 3D?
-
Does GeForce 7350LE video card fan run all the time or at certain temperatures?
I have a HP Pavilion m8147c Media Center with AMD Atlon 64 X2 Dual Core Processor 5600+ 2.80 GHz 3GB Ram and when running lately the monitor has started to go into sleep mode or something.Sometimes there is a warning that says something like no signal from DVI and one more but doesn't stay on long enough to read it all.I am running Vista Home Premium 32 bit.I had just installed a new game but pretty sure that has nothing to do with it as I used System Restore and backed up to a time before it was installed.At first it was only when playing games but now it happens with hardly anything running.This pc was bought in july 2007 and I have another desktop but I let my wife use one and I use the other.I opened the case and cleaned out all the dust but noticed when I started it up again the fan is not running on the video card.I don't know if it comes on at certain temps or runs all the time but I feel this is the problem.It has been on for about an hour and not come on at all.Any information will be appreciated.
This question was solved.
View Solution.captna wrote: Thanks Hanspuppa for the help you've given.I have two more questions.Why do I need the NVIDEA drivers when I will be installing a GIGABYTE card,and the Memory Interface on both cards is 64 bit,how does that affect a 32 bit Vista operating system?Just curious as I have never had any dealings with a video/graphics card before and I would think that it should be a 32 bit but since the GeForce 7350LE is also 64 bit it obviously works..I really appreciate the links and I am ordering the card now,thanks again you.For some reason I am not getting email notices when you reply but I am checking back every so often to see.
Hello captna, Usually when you purchase a new video card or other hardware device, the drivers that are included on the CD are an older version, sometimes as much as six months old. The chipset on any Brand of a given model would be either an Nvidia or an AMD ATI.
The chipset is the main component of the video card that controls most of the operations of the video card.
Since all the manufacturers of the Nvidia video cards use the chipset purchased from Nvidia, they are all the same chipset for any particular model. The different manufacturers can and do add or enable features for their particular cards, but the chipset is still the same.
Since the drivers from the manufacturer would be an older version, and Nvidia releases new versions quite often, it would be best to use the Nvidia drivers, since they would have updated fixes and sometimes features, and added support for some newer cards.
Your reference to the Memory Interface on both cards is 64 bit, has nothing to do with your version of the operating system. It just relates to the way, and speed of the interaction of the video card with the system (buss).
The higher the number of the Memory Interface, the more data that can be moved in and out of the video card, which results in a faster video performance. This just becomes important when playing games for the most part.
Using the system just for web surfing, emailing and some light gaming, would not have that much effect on the system.
More important to the system would be the amount of video card onboard memory. The Gigabyte has 1 GB of onboard memory compared to your original video card with 128 MBs of memory. This additional memory would likely show a slight performance increase in any light gaming.
You want see much, if any difference in the performance of your system, with the exception of perhaps the light gaming performance increase, with the new Gigabyte video card over the GeForce 7350LE. You should not experience the heat related issue as you had with the faulty fan on the GeForce 7350LE.
You can go into your personal settings on the Forum and select to not receive the email notices when someone responds to one of your post. Several years ago while on the Dell Community Forum, I would receive over a hundred emails every day until I disabled this feature.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem. -
After installing MSI GTX980 Video Card PC won't shutdown completely (Windows 7 S
Hi all,
I'm posting this here because it started post video card install.
After installing a new MSI GTX980 Gaming video card install into my Windows 7 PC it won't shut down completely, monitor and keyboards all turn off but fans keep spinning and LED light on vid card also remains on.
It's also happening in safe mode, it also won't shut down from login screen, a Restart however works fine.
Didn't have problem with previous card EVGA GTX780.
Motherboard is a Z77 AsRock Extreme 9 with latest bios (1.90).
Have reset Bios to defaults and updated Windows
Using latest Nvidia Drivers 344.16
Unfortunately can't test with other card as I no longer have it.
Given it's happening in SafeMode I'm inclined to think it more hardware related then software.
Not sure what else to try.
Other than the above the new video card has been running flawless.
ThanksThanks for reply it appears the problem isn't related to new card thankfully as I tried another vid card and onboard vid and problem persisted.
Sleep doesn't work either, actually both the sleep and hibernate options are greyed out in Windows.
I scanned PC for malware and restored it to last know working point, no idea whats happened but I suppose I won't know outright if its software or hardware without a clean install.
Specs:
AsRock Z77 Extreme 9 motherboard
Corsair HX PSU
MSI GTX980 Gaming Vid card
OSZ 256 SSD
8GB RAM 2133Mhz
Quote from: JLio01 on 13-October-14, 15:41:08
Did you try to unplug your video card and see if the problem remains? Does sleep(S3) mode work fine? What's your specs?
Maybe you are looking for
-
Understanding and resolving errors in HFR
Hello Guys, Can anyone please tell me how to understand the error thrown while running the HFR reports in workspace like the one shown below: 5200: Error executing query: ;hasPovDims=1;povXML=<?xml version="1.0"?><datasources><datasource name="FinRpt
-
Xcode 6.0.1 crash every time i try to open it.
Please help me with new xcode 6.0.1 it crashes every time i open xcode. When i tried to open organiser and devices window it also crashed. Tried reinstalling but no help. Here is what i found in Crash Report. Please help Process: Xcode [50722
-
List/menu options from database
Hello I need help trying to populate 2 list/menu with some database information. Let's suppose that this is my table: Id Brand Model 1 ford f1 2 citroen c1 3 citroen c2 4 citroen c3 5 toyota t1 6 toyota t2 7 volvo v1 I have 2 list/menu. One is the b
-
How do i get iMovie to recognize my USB connected webcam?
I upgraded to imovie 10.0.1 and it will not recognize my usb web cam. It finds the iSight camera just fine and the computer recognizes the webcam in other programs. Is there any fix for this or did I upgrade in error?
-
Convert Table into string, No FM is working good for this
Hi all, i want to convert a table into string, but while convert, i found out that the string has special lenght , and i am getting only some rows of the table wihle converting, even if i am using concatinate, i got the same problem, please let me k