W550s: possible SSD compatibility problem

My w550s usually had BSOD every two days.
OMGGGGGG
Will w550s have compability problems with Transcend MTS400???
My situtation is a little bit complicated.
I have Samsung MSATA 512GB(system) and Transcend MTS400 256GB on both M2 ports in W550S. one 2TB HDD.
(Samsung one with M2-mSATA adapter, when I bought this msata ssd, I didn't know W550S doesn't support MSATA) .
Yes, just like you said. I have met "2100 M.2 detection error" problem,I thought it's a w550s case issues(weird problem, hard to explain but it got fixed.)
But BSOD issues happens, Warm boot will get into windows but will BOSD after few minutes.. I had to cold boot and get into windows. Then it will be fine for around one day.
I thought some drivers problems, M2-mSata adapter compability problem, 2100 M.2 detection error problem, win8 problem, Lenovo software problem................................then my w550s can not detect Transcend m2 at all since two days ago.
Wiil this be the Transcend MTS400 issue?? Even I didn't use that as a boot drive ??
Moderator note: post moved to its own thread. Subject edited to reflect content. Was: Re: T450 & T550 M2 SSD Compatibility

The thread topic is for the T450 and T550 so your model might not have the same mainboard, Junbug2005 and people might get misinformation if they are not reading carefully.
Generally when I am having things like the BSOD I like to test RAM right off the bat, and make sure my drive doesn't have obvious SMART errors. Make sure drivers and OS are updated BIOS updated if relevant (there was a 1.10 bios I installed 3 days after I got my T450 relating to a BSOD).
With BSOD I think you can search the STOP Error Hex Codes (take a picture of the screen and use a search engine) they should point you to a particular part of the system that crashed. This can be elucidating.
Hope this is of some help.
Moderator note: posts moved to W forum.

Similar Messages

H61M-P20 Corsair 40GB SSD compatibility

Hi,
Just built a system based on H61M-P20 with 40GB F40 Corsair SSD as primary drive and another Hitachi 160GB as secondary drive, And it seems that every few boots the 40GB drive is not recognised by the bios.
I change Power Cable + sata cable + sata port and even a DIFFERENT Corsair F40 drive, But the problem returns....
Is there some incompatibility issue with that board and drive ?
I connected the drive to an older asus 775 board and it works fine.....
For the meanwhile I changed the F40 drive to OCZ agility 2 60GB and will see how it goes.....

Ok, now that some time has passed and I experimented with the updated corsair drive I can say that there is some compatibility problems with the H61-P20 AND the B75-E33 motherboards and the corsair drives.
It just does not boot every few boots, I Touch nothing and then on 2nd or 3rd attemts it boots again.
I replaced EVERYTHING (Even different corsair drives from the same model) after flashing latest motherboards bioses and it still behaves the same.
BTW changing the corsair 40 to the ocz 60 drive solved the specific problem I complained about in my 1st post. The client is working with the computer for about a month and a half without any problems.

Are There Compatability Problems Wtih Adobe Photoshop CS2 On The Windows Portion of iMac?

I understand that there are compatability problems with CS2 and lower vesions of the creative suite in relation to Leoapard OSX. Are there any compatability problems with CS2 for Windows if I install it on the Windows (using XP) partition of an iMac that uses the Leopard OSX?
Please advise. Thanks.

If its not running in Leopard you should be fine.
don't confuse running PowerPC software in Rosetta (PPC emulation) with running CS2 in XP which is native. It like apples and oranges. there is nothing in common.

HT5085 I would like to upload my music library from my PC to the Cloud through iTunes Match. I also will be purchasing a Mac in the near future and would like to download some of that music from iCloud to my Mac. Will I have compatability problems?

I would like to upload my music library from my PC to the Cloud through iTunes Match. I also will be purchasing a Mac in the near future and would like to download some of that music from iCloud to my Mac. Will I have compatability problems?

You should have no problems. To add a second computer or device to iTunes Match, see:
http://support.apple.com/kb/ht4913
Regards.

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem with my new camera? Will upgrading elements to a newqer version solve the problem?

NEF's for the D7100 should work with the latest version PSE13
You can download here and try free for 30 days:
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 #

Replacing Firefox 3.6.16 containing my history, bookmarks etc by version 4.0, I find that it will not open on my Mac Power PC G4 running on OS 10.4.11. Is there is a compatibility problem and how do I retrieve version 3.6 with my bookmarks etc

Replacing Firefox 3.6.16 containing my history, bookmarks etc by version 4.0, I find that it will not open on my Mac Power PC G4 running on OS 10.4.11. Is there is a compatibility problem and how do I retrieve version 3.6 with my bookmarks etc.

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
When you install one of the above it will use your existing bookmarks etc

Wierd monitor compatibility problem

Hi all,
Got a wierd monitor compatibility problem. G3 works fine on a sony 21" CRT.
Connected it to a Daytec 15" CRT which works fine with a windows 98 PC.
With the G3 I get the apple and the spinning up logo then the screen just goes blank.
Is this monitor PC only or something? It is an old monitor but I thought any monitor should work
if the vga connector fits?

So you are using this directly plugged into the stock Display card in a Blue & White G3 with NO adapter?
The Mac is probably still set for a higher resolution that the SONY can do, and has not noticed the display has changed.
Video pros says that Video can be plugged and unplugged all day long with no bad effects. If your old display is still around, try setting it to 640 by 480, save changes, and swap the other one in "live" at that resolution.
Other tricks:
Reset the PRAM. This will send you back to a default setting while booting up, but may change when the system becomes active.
Boot from a CD. This ignores the settings on your Hard drive, and boots to a very simple resolution like 640 by 480 to ensure that Most Macs can start up with it.

Windows Media Player 11 is needed for video on fav website, but version for firefox isn't working. Is this a compatability problem with Windows 7?

My favorite jewelry website requires a plug-in to operate. Installation of the plug-in is offered, but will not download and function. Is this a compatibility problem for Windows 7?

Link to that site please.

How can I Download Adobe Acrobat 7 Standard (needed due to a compatibility problem)?

How can I Download Adobe Acrobat 7 Standard (needed due to a compatibility problem)?

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Shockwave player updates: graphics card compatibility problems?

I've recently had a new problem reported to me in the Driveway Visualiser, a piece of Shockwave 3D content that I've been maintaining since we built it in 2008. I'm wondering if recent updates to the Shockwave Plugin (e.g. 11.5.8.612) may be contributing to this...
www.marshalls.co.uk/transform/driveway_visualiser/dv.asp
So I'd be interested to know if anyone else has had any new problems affecting old content. I tried reverting the dcr file to last year's version but the same problem still occurs, so it doesn't seem to be a recently-added bug in my code. I think it could be either a compatibility problem between the graphics card and the plugin, or between the Director 11.0 dcr and the Shockwave 11.5 web player.
Because we need the DirectImage Xtra, it's Windows only. For each different computer that we've tested, the Driveway Visualiser (DV) will either always work or always fail on that machine - regardless of whether IE or Firefox is used. All the test machines have DirectX 9.0c; all are running Win XP SP3 apart from one laptop with SP2 and Intel 965 chipset on which the DV fails. Only one has Director (11.0) installed, and on that the DV always works. The problem is much more common on laptops, so we reckon that Shockwave's ability to interface with the various graphics cards might be the reason why it's not getting the image property of a 3D cast member.
So here's what's actually happening:
When you get to step 4 of the DV, after you've drawn round the shape of your driveway, it tries to grab the image of a 3D cast member referred to by the variable gWorldMember, and fails with the "four parameters expected" error message, on this line of code...
zoomAfterImage.copyPixels(gWorldMember.image, zoomAfterImage.rect, gWorldMember.image.rect)
gWorldMember.image is being returned as <image:0> (not a usuable image) and so its rect property does not exist, hence the crash. This line of code crashes whether or not there's a sprite of the relevant 3D member on the stage at the time. The member's defaultRect has been temporarily changed so we can grab a 1024x1024 image off it. Using copyPixels, this image is resized down to the size of the zoomAfterImage image variable (again 450x450). This gives us an image at the original size of 450x450, but with a softer image quality than if we'd grabbed it from the 3D member at that size.
Is anyone suffering similar problems or aware of what Adobe has been changing in the player? At the moment I just don't see how I can fix this by changing my code...

I had wondered if there was a clash between the Director 11.0 dcr and the Shockwave 11.5 player, so I downloaded the Director 11.5 trial and re-published it using that.
It didn't make any difference, so I'm left with my original suspicion that Shockwave is failing to interface with certain graphics hardware setups via directX, when it tries to read the image property of a 3D cast member.

Compatibility problem with macro media flash active control

I am getting a message on my screen "compatibility problem with macro media flash active control, it isnt compatible with my version of windows (vista). How can this be fixed? why am I suddenly getting it now? I have the latest Adobe flash player installed.
Trisha

the latest flash is probably the problem... it's seems that the latest flash has been causing a boat load of issues. i did a system restore to undo the flash and mozilla upgrades and it's still crashing but not as bad as it was with the upgrades.

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

Plug-in 5.8.0 Compatibility Problem with Pr 8.2

Hi Guys
I'm running Win7, SP1 with a NVidia Quadro FX 3800 card. Is it me or is CC2014 a bug laden step backwards?
Apart from the serious CUDA issue users are facing, since a couple of updates ago I get a compatibility problem. Whenever I try to launch Audition or AE (or even SmartSounds) from an open Pr project, I get an error message saying "Premiere Pro version 8.2 is not compatible with Premiere Pro Plug-in version 5.8.0." The issue first appeared in 8.1.
Has anyone else faced this issue and how can I resolve it (before I throw in the towel and go back to CS5!?)
Regards,
Graham

Thanks, Ann. I hadn't realised there was a 5.8.1 update, which seems to have solved the problem (I thought it was something deeper as the error appeared when I tried to open AE through the DL.

Compatibility problem windows7- 64 bits and oracle 8

I have a compatibility problem with windows 7 and 64 bits and oracle 8 client
the data server is also version 8
What type of client is compatible with oracle 8 and 64 bits?
or any solution to the problem.
I use the client to run a desktop application
thanks

Oracle 8 client is not certified on Windows 7. Client 10.2.0.5 is compatible with Oracle 8 and is certified on Windows 7 too.
To install 10.2.0.5 client, please refer to the MOS document.
How To Install Oracle 10.2.0.5 Client Software on Windows 7 (32 or 64-bit) and Windows 2008 R2 (64-bit) (Doc ID 1316079.1)

Macbook Pro 5,1 SSD Compatibility

Greetings,
I just have a couple questions regarding SSD compatibility with a MBP 5,1.
I was thinking of buying a OCZ 120 GB Vertex 2 Series SATA II 2.5in SSD, and I was wondering if there are any compatibility issues I should be worried about with the MBP 5,1 (late 2008).
Is the instillation of HDs any trickier on the 5,1 than the more recent MBP's? Also if I took it into an apple store to get installed how much would it cost? Any ideas?

Chris Lo wrote:
Also if I took it into an apple store to get installed how much would it cost? Any ideas?
Hi Chris,
I am not aware of any compatibility issues between that SSD and your machine. I've purchased a couple of their SSD drives and the install was quick and easy. Although I haven't installed one of their drives into the MBP 5,1 (Late 2008), I have installed SSDs and normal SATA drives into the same body style and there's been significant reworking between the models that I've come across. Just make sure you have the appropriate tool for the drive screws and you'll be all set.
Regarding the install, the Apple Store will not install 3rd party components into your machine. Nor do they sell HDs that they will install. Apple will only install the RAM you buy there or replace parts as a result of a service.

W550s: possible SSD compatibility problem

Similar Messages

Maybe you are looking for