W7: Error creating Repair disk or image "...the parameter is incorrect (0x80070057)

Initial cause of problem was trying to duplicate bootable SD card and it wrote it to C Drive system partition. Finally stumbled around and got system volume rebuilt and got it running again but Recovery partition got deleted in the process. I used W7 Recover/repair since Toshiba options seemed to be to overwrite everything (backup was month old, so wanted to avoid restoring since system files and data were still "there". I can use Toshiba program to make Repair, Recovery and Image copies. However, I cannot use W7 Backup program to make a Repair disk or Image backup. I get the error message: "System Repair disc could not be created The parameter is incorrect (0x80070057)"
I suspose the next thing to try would be to run System file checker since W7 sees a problem that the Toshiba utilities do not detect. Is there any "risk" of running the system file checker (sfc.exe), which also changes permissions on all system files.
I would like to correct any lurking system file problem, but also don't want to take a step backward trying to correct it. I have a W7 Windows disk.
Would appreciate suggestion.... leave alone and trust Toshiba image/recovery DVD I've made, try to correct it or leave well enough alone and hope it doesn't bite me later when I need to do a recovery. Thanks....

Hi! I just got to add my 2 cents! Very nice replies and good information. Nice work Jerry and eagle!
Dokie!
Just one small problem the link has a down load manager. I'll let eagle explain that?? My advise is not to use a down load manager period! If you scroll down to the bottomof the page, you will be fine.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture48.JPG ‏297 KB
Capture49.JPG ‏146 KB

Similar Messages

An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))

We are using DPM Version: 4.1.3465.0 with System Center 2012 Service Pack 1 to back up VMs in our Hyper V Cluster. We have a total of 37 VMs with a combination of 2008r2 servers and 2012 servers. One of our 2012 servers will not backup, and we consistently
get the message "An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))". I have seen this error message when I Googled it, but cannot get past it. I have deleted the Protection Group and
data and tried to re-create, but get the same errors. I also thought the the server might be mis-reporting the data size, but I expanded that to cover the replication data. I have also tried to perform consistancy checks multiple times with no luck. I have
not seen a difinitive answer from my Google searches, so was hopeful someone has seen this also, and have had success in resolving. Currently this server has no backup recovery points, so I am worried if it does crash. I think I have the rollups installed
as well.

Hi Kelly,
does the issue still persists?

An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057)) After DPM 2012 SP1 to R2 Upgrade

Hi,
We have upgraded DPM 2012 SP1 to DPM 2012 R2 and OS is Windows 2012 standard.
Now in File Protection Group, we receive error
"An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))".
This happens to only one Drive(X: Drive) of the PG server, other drive(Z: Drive) backup is working fine.
We tried,
Deleted entire protection group and recreated ,
Ran consistency job 2 to 3 times.
Ran Synchronize with consistency check.
But every time It failed. Before upgrade it was working fine.
Thanks

Hi
I would suggest opening a new case with MS to allow the DPM team to further look into the issue. Also the DPM 2012 R2 RollUp which addresses the (0x80070057)
issue is Rollup 1 and the private will not be needed after applying Rollup 1. The Roll up is found here
http://support.microsoft.com/kb/2904687/en-us
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your
question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057))

We are trying to convert a physical windows 2003 R2 32 bit server to a VM using VMM 2008 R2 with all updates installed. Each time when we scan the system on VMM, it gets this message: Error (2901) The operation did not complete successfully because of
a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)). If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

Hi Sir,
>> If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
>> gets this message: Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)
Please refer to following article regarding this error :
http://blogs.technet.com/b/hugofe/archive/2010/07/09/abe.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Recovery points failing on 2012 R2 x64 virtual server via DPM 2012 R2 x64 - The parameter is incorrect (0x80070057)

I'm getting this on only one of my many virtual servers for some reason.. i've dug around.. i saw there may be a "private" fix for this issue..
The specific message is:
The replica of Volume D:\ on server02.domain.local is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery points,
but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))
This is not a sharepoint server..
Any thoughts here
EDIT:
I am not seeing any indication of errors on the event viewer of the server being backed up..
Tech, the Universe, Everything: http://tech-stew.com

Hi,
We have released the fix in UR1.
Issues that are fixed in System Center 2012 R2 Data Protection Manager Update Rollup 1
Issue 1
A 0x80070057 error occurs when a session is closed prematurely. This error is caused by a failure during a consistency check.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 - Replica is inconsistent (ID 104 Details: The parameter is incorrect (0x80070057))

Since implementing DPM 2012 R2, we have been having issues with several replicas in different protection groups. We are running version 4.2.1254.0. We have been unable to backup, as we are receiving the following error when running a consistency check:
An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))
Any idea how to get this fixed?

104
An unexpected error occurred while the job was running.
This error can appear if you are trying to protect a SQL Server database that has files on a remote share. This is not supported by DPM.
Please check below DPM error codes list for reference.
http://social.technet.microsoft.com/wiki/contents/articles/24613.system-center-data-protection-manager-error-codes.aspx

There was an error creating your disk image.

FCPX v 10.1 In exporting a completed project to a disk image, the following error message came up: There was an error creating your disk image. VIDEO_INPUT_READ_ERR
It only has occurred on one project (so far).
Has anyone encountered this type of error and found a suitable work around?

If it only happened with that one project, a reasonable guess is that the problem is in the media – either an original clip or a render file. Deleting the render files from the File menu for both project and events would be a good place to start. Turn off BG Rendring and without rendering, see whether a short selection will export as a master file. If it does, try the img again.
Russ

HT4848 Error creating recovery disk in Disk Assist

I've carefully followed all instruction in this post: http://support.apple.com/kb/ht4848, but I am having an error when creating the recovery disk.
The recovery Disk Assist starts creating it, but stops early on. The message I get is titled "Conclusion," and it says "The recovery drive wasn't created. There was an error creating recovery disk."
Can anyone help me with this? I followed all the steps in the post above and I also created the partition on the external drive.
I really need to wipe out my computer and make it appear "as new" because I am selling it. Any help would be great!
Thanks!

Same happened to me. This makes absolutely no sense, but I just kept trying and trying then it finally worked. For me, it hasn't been worth the bother. These restore DVDs don't work like the ones I made for an Acer laptop, for example. On my Acer, I repartitioned, reformatted my drive and was easily able to restore my computer before I sold it. I've been going nuts trying to restore my computer after a clean install of Windows 7. Still can't get it to work.

Error in backup of C:\ during read: Error [0x80070057] The parameter is incorrect.

Hi,
Im trying to backup a system state in windows server 2008 R2 HAPP02 using DPM 2010 and im recieving the following error.
Source: Backup, Event ID 5
The backup operation that started at '‎2011‎-‎09‎-‎19T06:08:29.143748400Z' has failed with following error code '2155347997'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
I tried to run WBADMIN START SYSTEMSTATEBACKUP -backupTarget:c: and then i recieve the following error
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Please wait while system state files to back up are identified.
This might take several minutes...
Found (1113) files.
Found (6575) files.
Found (10393) files.
Found (13356) files.
Found (16175) files.
Found (27117) files.
Found (30612) files.
Found (34342) files.
Found (36966) files.
Found (40656) files.
Found (41935) files.
Found (45428) files.
Found (48639) files.
Found (51805) files.
Found (57721) files.
Found (64792) files.
Found (72735) files.
Found (77340) files.
Found (81183) files.
Found (81254) files.
Found (81254) files.
Found (81254) files.
The search for system state files is complete.
Starting to back up files...
The backup of files reported by 'Task Scheduler Writer' is complete.
The backup of files reported by 'VSS Metadata Store Writer' is complete.
The backup of files reported by 'Performance Counters Writer' is complete
The backup of files reported by 'IIS Config Writer' is complete.
Overall progress: 0%.
Currently backing up files reported by 'System Writer'...
Overall progress: 1%.
Currently backing up files reported by 'System Writer'...
Overall progress: 2%.
Currently backing up files reported by 'System Writer'...
Overall progress: 4%.
Currently backing up files reported by 'System Writer'...
Overall progress: 5%.
Currently backing up files reported by 'System Writer'...
Overall progress: 7%.
Currently backing up files reported by 'System Writer'...
Overall progress: 8%.
Currently backing up files reported by 'System Writer'...
Overall progress: 9%.
Currently backing up files reported by 'System Writer'...
Overall progress: 11%.
Currently backing up files reported by 'System Writer'...
Overall progress: 12%.
Currently backing up files reported by 'System Writer'...
Overall progress: 13%.
Currently backing up files reported by 'System Writer'...
Overall progress: 15%.
Currently backing up files reported by 'System Writer'...
Summary of the backup operation:
The backup of the system state failed [2011-09-19 09:42].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-19-09-2011_09-36-37.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-19-09-2011_09-36-37.log
The operation ended before completion.
The parameter is incorrect.
When i check the backup_error log file i found the following error
Error in backup of C:\ during read: Error [0x80070057] The parameter is incorrect.
Any ideas about the error?
Thanks in advnace,
Laith.

sorry for the delay.
This error condition has been found with Anti-virus software.
Use Msconfig to disable all antivirus services and Startup items [or uninstall temporarily] and test.
Reviewing logs.
[0]0ED8.124C::09/22/2011-14:05:02.204 [usa]HardWrite: NtWriteFile failure: 0xc000009d, 0xbb9ee000, 0x10000
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::SetFormatStatus
backup.cpp@4817] ERROR:Format was unable to complete successfully, final result: 57
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::FormatMedia
backup.cpp@4740] ERROR:Format on
\\?\Volume{d841345f-e505-11e0-bb05-00155d646a25} failed.
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::FormatMedia
backup.cpp@4746] INFO:Format done
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::MountVHD
backup.cpp@15683] ERROR:FormatMedia
\\?\Volume{d841345f-e505-11e0-bb05-00155d646a25} failed, hr: 0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@15702] EXIT: CBlbBackupAsync::MountVHD
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::CreateVHD
backup.cpp@9127] ERROR:MountVHD failed for
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901\9f1ea685-a26b-11de-bbc7-806e6f6e6963.vhd failed hr=0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@9138] EXIT: CBlbBackupAsync::CreateVHD
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@9592] EXIT: CBlbBackupAsync::PrepareTargetVolumesForSSB
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::BackupToMediaForSSB
backup.cpp@10379] ERROR:SSB call failed with hr=0x807800c5, detailed hr=0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [blbsrv
restoresystemstate.cpp@131] ENTER: CBlbsrvSystemStateRestore::StopFileLogging
[0]ed8.124c 09/22/2011-14:05:02.208 [blbsrv
restoresystemstate.cpp@138] EXIT: CBlbsrvSystemStateRestore::StopFileLogging
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@10449] EXIT: CBlbBackupAsync::BackupToMediaForSSB
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::PerformSystemStateBackup
backup.cpp@17287] WARNING:SSB operation unsuccessful with hr=0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbSystemStateBackupAsync::SetState
systemstatebackup.cpp@1061] INFO:ENGINE STATE:BACKUP SYSTEM STATE:5
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::PerformSystemStateBackup
backup.cpp@17300] INFO:Backup has system state = 0
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@17306] EXIT: CBlbBackupAsync::PerformSystemStateBackup
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@17331] ENTER: CBlbBackupAsync::UpdateBackupInfoIfRequired
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@17379] EXIT: CBlbBackupAsync::UpdateBackupInfoIfRequired
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
componentbackuphelper.cpp@1456] ENTER: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper CBlbComponentBackupHelper::BackupComplete
componentbackuphelper.cpp@1460] INFO:bIsBackupFailed: 0
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
componentbackuphelper.cpp@1261] ENTER: CBlbComponentBackupHelper::BuildSppBackupCompleteStateArray
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
componentbackuphelper.cpp@1323] EXIT: CBlbComponentBackupHelper::BuildSppBackupCompleteStateArray
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: CVssAsrAPIBackup::GetVolumeComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: BootGetWinREVolGuid
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: _GetElementData
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn][WPP_ASR_ERROR] NT STATUS ERROR 0xc0000225(STATUS_NOT_FOUND) [status]: (bootlib.cpp:497)
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: _GetElementData
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: BootGetWinREVolGuid
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
\\?\Volume{9f1ea685-a26b-11de-bbc7-806e6f6e6963} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
\\?\Volume{d513444f-a276-11de-b33e-00155d663512} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrwriter][WPP_ASR_INFO]cComponents = 3 , cMaxComponents = 5 (asrwriterbackup.cpp:602)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: CVssAsrAPIBackup::GetVolumeComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.429 [asrcmn]ENTER: CVssAsrAPIBackup::GetDiskComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.429 [asrcmn]ENTER: DiskListInitialize
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Disk
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Disk
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: DiskListInitialize
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskListMarkClusteredDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: DiskListMarkClusteredDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskListPopulateLayoutInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Getting disk info:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrbkup.cpp:1415)
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]EXIT: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]ENTER: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]ENTER: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]ENTER: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrsys][WPP_ASR_INFO]Disk device number=1 (asrbkup.cpp:1495)
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrsys][WPP_ASR_INFO]Getting disk info:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrbkup.cpp:1415)
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]EXIT: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]EXIT: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Disk device number=0 (asrbkup.cpp:1495)
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: DiskListPopulateLayoutInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: DiskListMarkOfflineDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Getting Online/Offline disk:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrsys.cpp:233)
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Getting Online/Offline disk:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrsys.cpp:233)
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: DiskListMarkOfflineDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: CVssAsrAPIBackup::GetDiskComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: CVssAsrAPIBackup::GetBcdComponent
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]ENTER: GetVolumeNameFromDeviceName
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: GetVolumeNameFromDeviceName
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: CVssAsrAPIBackup::GetBcdComponent
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3149] ENTER: CBlbBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3209] ENTER: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [componenthelper
componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [componenthelper
componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3342] EXIT: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3359] ENTER: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
systemstatebackup.cpp@740] ENTER: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
systemstatebackup.cpp@874] EXIT: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3399] EXIT: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3192] EXIT: CBlbBackupAsync::QueryStatus
[0]ed8.124c 09/22/2011-14:05:03.742 [componenthelper
componentbackuphelper.cpp@1518] EXIT: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:03.742 [service
backup.cpp@6290] ENTER: CBlbBackupAsync::WriteBackupComponents
[0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils
BlbSecurityUtils.cpp@1146] ENTER: CBlbImpersonationHelper::ImpersonateCaller
[0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils CBlbImpersonationHelper::ImpersonateCaller
BlbSecurityUtils.cpp@1178] INFO:No impersonation done.
[0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils
BlbSecurityUtils.cpp@1183] EXIT: CBlbImpersonationHelper::ImpersonateCaller
[0]ed8.124c 09/22/2011-14:05:03.743 [util
systemutils.cpp@709] ENTER: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.743 [util BlbutilRegReadDWORD
systemutils.cpp@731] WARNING:RegQueryValueEx NoTargetSnapshot unsuccessful, hr:0x80070002
[0]ed8.124c 09/22/2011-14:05:03.743 [util
systemutils.cpp@749] EXIT: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.755 [service
backup.cpp@6444] EXIT: CBlbBackupAsync::WriteBackupComponents
[0]ed8.124c 09/22/2011-14:05:03.755 [service
backup.cpp@8946] ENTER: CBlbBackupAsync::UpdateLocalCatalogAfterbackup
[0]ed8.124c 09/22/2011-14:05:03.755 [service
backup.cpp@7790] ENTER: CBlbBackupAsync::GetComponentsList
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'TasksStore' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (0) <NULL>\TasksStore.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'WriterMetadataStore' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (1) <NULL>\WriterMetadataStore.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'PerformanceCounters' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (2) <NULL>\PerformanceCounters.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'WMI' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (3) <NULL>\WMI.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'IISMETABASE' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (4) <NULL>\IISMETABASE.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'COM+ REGDB' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (5) <NULL>\COM+ REGDB.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'IISCONFIG' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (6) <NULL>\IISCONFIG.
[0]ed8.124c 09/22/2011-14:05:03.768 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'System Files' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (7) <NULL>\System Files.
[0]ed8.124c 09/22/2011-14:05:03.768 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'Registry' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (8) <NULL>\Registry.
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@7917] EXIT: CBlbBackupAsync::GetComponentsList
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@7943] ENTER: CBlbBackupAsync::AddComponentsToLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@7961] EXIT: CBlbBackupAsync::AddComponentsToLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@11835] ENTER: CBlbBackupAsync::SetVolumesInLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@1557] ENTER: CBlbVolumeBackupContext::GetOriginalAccessPath
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@1585] EXIT: CBlbVolumeBackupContext::GetOriginalAccessPath
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::SetVolumesInLocalCatalog
backup.cpp@11894] INFO:Not adding volume C: to catalog since it failed
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::SetVolumesInLocalCatalog
backup.cpp@11943] ERROR:Backup of all the source volumes failed.
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@11970] EXIT: CBlbBackupAsync::SetVolumesInLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::UpdateLocalCatalogAfterbackup
backup.cpp@8986] ERROR:CBlbBackupAsync::SetVolumesInLocalCatalog failed with hr=0x80780049
[0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@9050] EXIT: CBlbBackupAsync::UpdateLocalCatalogAfterbackup
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15335] ENTER: CBlbBackupAsync::RemoveESPCache
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::RemoveESPCache
backup.cpp@15338] INFO:No esp cache created, so not freeing up
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15345] EXIT: CBlbBackupAsync::RemoveESPCache
[0]ed8.124c 09/22/2011-14:05:03.768 [service BlbBackupThreadFunc
backup.cpp@19732] INFO:BlbBackupThreadFunc took 363232 ms to complete
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15795] ENTER: CBlbBackupAsync::DismountAllVHDs
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15723] ENTER: CBlbBackupAsync::DismountVHD
Unknown( 70): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 68): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 69): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 77): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 78): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 74): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 79): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 80): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 71): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 72): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
[0]ed8.124c 09/22/2011-14:05:03.769 [service CBlbBackupAsync::DismountVHD
backup.cpp@15744] ERROR:CBlbVhdHelper::Dismount failed for '\\?\Volume{d841345f-e505-11e0-bb05-00155d646a25}', hr: 0x80070490
[0]ed8.124c 09/22/2011-14:05:03.769 [service
backup.cpp@15775] EXIT: CBlbBackupAsync::DismountVHD
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [service
backup.cpp@15819] EXIT: CBlbBackupAsync::DismountAllVHDs
[0]ed8.124c 09/22/2011-14:05:03.769 [service BlbBackupThreadFunc
backup.cpp@19738] WARNING:DismountAllVHDs unsuccessful with hr=0x80070490
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbBackupTargetUtils.cpp@3225] ENTER: BlbDeleteOldBackupLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
BlbFsUtils.cpp@1208] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup-*'
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
BlbFsUtils.cpp@1303] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
BlbFsUtils.cpp@1208] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup_Error*'
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
BlbFsUtils.cpp@1303] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
BlbFsUtils.cpp@1208] INFO:Found '0' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup_Operations*'
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
BlbFsUtils.cpp@1303] INFO:Found '0' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbBackupTargetUtils.cpp@3260] EXIT: BlbDeleteOldBackupLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper
componentbackuphelper.cpp@1456] ENTER: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper CBlbComponentBackupHelper::BackupComplete
componentbackuphelper.cpp@1460] INFO:bIsBackupFailed: 1
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper CBlbComponentBackupHelper::BackupComplete
componentbackuphelper.cpp@1473] INFO:BackupComplete already attempted.
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper
componentbackuphelper.cpp@1518] EXIT: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:03.769 [service
backup.cpp@13649] ENTER: CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.769 [service
PerformanceManager.cpp@550] ENTER: CPerformanceManager::Initialize
[0]ed8.124c 09/22/2011-14:05:03.769 [service
PerformanceManager.cpp@281] ENTER: CPerformanceManager::QueryPerformanceSettings
[0]ed8.124c 09/22/2011-14:05:03.770 [service CPerformanceManager::QueryPerformanceSettings
PerformanceManager.cpp@382] INFO:Buffer size is 4. First line is <NULL>
[0]ed8.124c 09/22/2011-14:05:03.770 [service CPerformanceManager::QueryPerformanceSettings
PerformanceManager.cpp@389] INFO:Custom performance settings is empty.
[0]ed8.124c 09/22/2011-14:05:03.770 [service
PerformanceManager.cpp@484] EXIT: CPerformanceManager::QueryPerformanceSettings
[0]ed8.124c 09/22/2011-14:05:03.770 [service
PerformanceManager.cpp@560] EXIT: CPerformanceManager::Initialize
[0]ed8.124c 09/22/2011-14:05:03.777 [util
systemutils.cpp@709] ENTER: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.777 [util BlbutilRegReadDWORD
systemutils.cpp@731] WARNING:RegQueryValueEx DoNotDeleteFFBSnapshot unsuccessful, hr:0x80070002
[0]ed8.124c 09/22/2011-14:05:03.777 [util
systemutils.cpp@749] EXIT: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.777 [service
PerformanceManager.cpp@585] ENTER: CPerformanceManager::GetSettingsForVolume
[0]ed8.124c 09/22/2011-14:05:03.777 [service
PerformanceManager.cpp@620] EXIT: CPerformanceManager::GetSettingsForVolume
[0]ed8.124c 09/22/2011-14:05:03.777 [service CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
backup.cpp@14045] INFO:Deleting current snapshot (\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy8\)
[0]ed8.124c 09/22/2011-14:05:03.931 [service
backup.cpp@14082] EXIT: CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14432] ENTER: CBlbBackupAsync::SetSourceDiffAreasIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14539] EXIT: CBlbBackupAsync::SetSourceDiffAreasIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14737] ENTER: CBlbBackupAsync::ResetTargetDiffAreaSize
[0]ed8.124c 09/22/2011-14:05:03.933 [service CBlbBackupAsync::ResetTargetDiffAreaSize
backup.cpp@14754] INFO:Not resetting diff area
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14866] EXIT: CBlbBackupAsync::ResetTargetDiffAreaSize
[0]ed8.124c 09/22/2011-14:05:03.963 [service BlbBackupThreadFunc
backup.cpp@19873] ERROR:Backup operation aborted with hr=80780049
[0]ed8.124c 09/22/2011-14:05:03.963 [service CBlbSystemStateBackupAsync::SetState
systemstatebackup.cpp@1061] INFO:ENGINE STATE:BACKUP SYSTEM STATE:5
[0]ed8.124c 09/22/2011-14:05:03.963 [service CBlbBackupAsync::SetState
backup.cpp@14709] INFO:ENGINE STATE:BACKUP:12. Previous state:8
[0]ed8.124c 09/22/2011-14:05:03.963 [util
fileutils.cpp@1388] ENTER: BlbutilDeleteDirectory
[0]ed8.124c 09/22/2011-14:05:03.963 [util
fileutils.cpp@1183] ENTER: BlbutilDeleteDirectory2
[0]ed8.124c 09/22/2011-14:05:03.970 [util
fileutils.cpp@1344] EXIT: BlbutilDeleteDirectory2
[0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
fileutils.cpp@1443] INFO:Aborting deletion of
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 as one or more diectories or files are not getting deleted
[0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
fileutils.cpp@1463] INFO:Total number of files/directories deleted in
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 is 17
[0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
fileutils.cpp@1465] INFO:Deleting
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 took 0 ms
[0]ed8.124c 09/22/2011-14:05:03.970 [util
fileutils.cpp@1467] EXIT: BlbutilDeleteDirectory
[0]ed8.124c 09/22/2011-14:05:03.970 [service
backup.cpp@12718] ENTER: CBlbBackupAsync::PublishAllBackupStopEvents
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::PublishAllBackupStopEvents
backup.cpp@13047] INFO:Backup info for Volume [hr=8078001D, detailed hr = 0, Flags=1574, backupTypeDetermined = 1, IsCritical = 1]
[0]ed8.124c 09/22/2011-14:05:03.971 [componenthelper
componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.124c 09/22/2011-14:05:03.971 [componenthelper
componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.124c 09/22/2011-14:05:03.971 [service
systemstatebackup.cpp@1526] ENTER: CBlbSystemStateBackupAsync::GetSSBTimes
[0]ed8.124c 09/22/2011-14:05:03.971 [service
systemstatebackup.cpp@1531] EXIT: CBlbSystemStateBackupAsync::GetSSBTimes
[0]ed8.124c 09/22/2011-14:05:03.971 [blbengutils
BlbSqmUtils.cpp@342] ENTER: PublishBackupSqmDatapoint
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@13273] EXIT: CBlbBackupAsync::PublishAllBackupStopEvents
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@15016] ENTER: CBlbBackupAsync::UpdateBackupStatInRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@14895] ENTER: CBlbBackupAsync::GetLastSuccessfulBackupInfo
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::GetLastSuccessfulBackupInfo
backup.cpp@14960] INFO:Last successful backup stats. utc time 0, target name (NULL), target access path (NULL)
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@14991] EXIT: CBlbBackupAsync::GetLastSuccessfulBackupInfo
[0]ed8.124c 09/22/2011-14:05:03.971 [helper
blbBackupStatUpdater.cpp@205] ENTER: CBlbBackupStatUpdater::SaveStatsToRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [helper CBlbBackupStatUpdater::SaveStatsToRegistry
blbBackupStatUpdater.cpp@233] INFO:RegOpenKeyEx was unsuccessful for HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsBackup. hr=0x80070002
[0]ed8.124c 09/22/2011-14:05:03.971 [helper
blbBackupStatUpdater.cpp@368] EXIT: CBlbBackupStatUpdater::SaveStatsToRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::UpdateBackupStatInRegistry
backup.cpp@15058] WARNING:pBlbBackupStatUpdater->SaveStatsToRegistry unsuccessful with hr=0x80070002. This should be fine on server skus.
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@15069] EXIT: CBlbBackupAsync::UpdateBackupStatInRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [service BlbBackupThreadFunc
backup.cpp@19957] WARNING:UpdateBackupStatInRegistry unsuccessful with hr=80070002
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restoresystemstate.cpp@259] ENTER: CBlbsrvSystemStateRestore::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restorefiles.cpp@162] ENTER: CBlbsrvRestoreFiles::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
srvutil.cpp@139] ENTER: BlbsrvFreeRestoreFileSpecs
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
srvutil.cpp@151] EXIT: BlbsrvFreeRestoreFileSpecs
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restorefiles.cpp@210] EXIT: CBlbsrvRestoreFiles::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restoresystemstate.cpp@312] EXIT: CBlbsrvSystemStateRestore::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbAsync::Done
async.cpp@187] INFO:Marking async operation as completed
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbAsync::Done
async.cpp@190] INFO:Calling CompleteAsyncOperation for parent operation
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@19987] EXIT: BlbBackupThreadFunc
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3149] ENTER: CBlbBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3209] ENTER: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [componenthelper
componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [componenthelper
componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3342] EXIT: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3359] ENTER: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
systemstatebackup.cpp@740] ENTER: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
systemstatebackup.cpp@874] EXIT: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3399] EXIT: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3192] EXIT: CBlbBackupAsync::QueryStatus
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@853] ENTER: BlbStopTracing
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@397] ENTER: BlbStopTracing
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@51] ENTER: BlbAllocateEventTraceProp
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@83] EXIT: BlbAllocateEventTraceProp
Log Name:      Microsoft-Windows-Backup
Source:        Microsoft-Windows-Backup
Date:          9/22/2011 1:28:44 AM
Event ID:      5
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      HEIAPP02.heimstaden.local
Description:
The backup operation that started at '‎2011‎-‎09‎-‎22T06:22:24.687716500Z' has failed with following error code '2155347997'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Sumesh P - Microsoft Online Community Support

Using MSXML2.ServerXMLHttp in MS SQL 2012 - receiving error "The Parameter is incorrect".

I have a procedure used to make http post requests to a REST web service external to my SQL server, using MSXML2.ServerXMLHttp via POST request. This procedure works without issue in SQL 2008 r2, but upon upgrade to 2012, begins to fail with the message
: "The Parameter is incorrect."
It is failing when I attempt to exec the 'send' method on line 137. I cannot find any documentation about how the MSXML2.ServerXMLHttp object needs to be treated differently in 2012. I found a similar question here: http://social.technet.microsoft.com/Forums/sqlserver/en-US/a6de1eea-5fe9-4087-809b-524c98f20a4d/msxml6dll-methodsend-dont-work-in-windows-server-2012-and-sql-2008r2?forum=sqlxml
But it isn't resovled - just indications to file a bug report - and one solution that says to just copy the DLL from 2008 over to 2012 to fix the issue. Is that really the right solution here or does someone have information on how to do this properly with
2012?
Here is my procedure:
CREATE procedure [dbo].[HTTP_REQUEST](@response varchar(4000) out,
@method varchar(64),
@p1name varchar(256) = null,
@p1value varchar(max) = null,
@p2name varchar(256) = null,
@p2value varchar(max) = null,
@p3name varchar(256) = null,
@p3value varchar(max) = null,
@p4name varchar(256) = null,
@p4value varchar(max) = null,
@p5name varchar(256) = null,
@p5value varchar(max) = null,
@p6name varchar(256) = null,
@p6value varchar(max) = null,
@parent_table varchar(30) = null
As
Declare
@obj int
,@hr int
,@status int
,@msg varchar(255)
,@apiKey varchar (64)
,@params varchar (max)
SET @apiKey = (Select a.default_value from T_DEFAULTS a WHERE a.parent_table = @parent_table AND a.field_name = 'm2apiKey')
SET @params = ''
If @apiKey is null
Begin
select @msg = 'Invalid mail2 APIKey'
RAISERROR(@msg, 11, 2) WITH SETERROR
return -101
End
If @method is null
Begin
select @msg = 'No valid mail2 API method provided'
RAISERROR(@msg, 11, 2) WITH SETERROR
return -101
End
exec @hr = sp_OACreate 'MSXML2.ServerXMLHttp', @obj OUT
if @hr <> 0 begin Raiserror('sp_OACreate MSXML2.ServerXMLHttp.3.0
failed', 16,1) return end
exec @hr = sp_OAMethod @obj, 'open', NULL, 'POST', 'http://api.someapiurl.net/REST/', true
if @hr <>0 begin set @msg = 'sp_OAMethod Open failed' goto eh end
exec @hr = sp_OAMethod @obj, 'setRequestHeader', NULL, 'Content-Type',
'application/x-www-form-urlencoded'
if @hr <>0 begin set @msg = 'sp_OAMethod setRequestHeader failed' goto
eh end
--Set Timeouts
exec @hr = sp_OAMethod @obj, 'setTimeouts',NULL,5000,5000,10000,10000
if @hr <>0 begin set @msg = 'sp_OAMethod setTimeouts failed' goto
eh end
--Add Method
SET @params = '&method='+@method
--Add API key
SET @params = @params + '&key='+@apiKey
--Add p1 if present
IF @p1name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p1name + '=' + @p1value
END
--Add p2
IF @p2name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p2name + '=' + @p2value
END
--Add p3
IF @p3name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p3name + '=' + @p3value
END
--Add p4
IF @p4name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p4name + '=' + @p4value
END
--Add p5
IF @p5name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p5name + '=' + @p5value
END
--Add p6
IF @p6name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p6name + '=' + @p6value
END
--SELECT @params
--Send the request
exec @hr = sp_OAMethod @obj, send, NULL, @params
if @hr <>0 begin set @msg = 'sp_OAMethod Send failed' goto eh end
--Get the status
exec @hr = sp_OAGetProperty @obj, 'status', @status OUT
if @hr <>0 begin set @msg = 'sp_OAGetProperty read status failed on get status' goto
eh
end
if @status <> 200 begin set @msg = 'sp_OAMethod http status ' +
str(@status) goto eh end
if @status = 200 begin print 'sp_OAMethod http status is 200:Successful ' +
str(@status) + @params end
exec @hr = sp_OAGetProperty @obj, 'responseText', @response OUT
if @hr <>0 begin set @msg = 'sp_OAGetProperty read response failed on get response text error code' + convert(varchar,@hr) goto
eh end
exec @hr = sp_OADestroy @obj
return
eh:
exec @hr = sp_OADestroy @obj
Raiserror(@msg, 16, 1)
return
Many thanks for the input -
Chris

How can I fix the problem? changing the OS? I just bought the new server. I do?
thanks
Miky
Rambaldi

Error while opening HFM Application "The Parameter is Incorrect"

I have recently installed HFM 11.1.2.1 and created an applicatiion. When I try to open that application, system is giving an error message stating "The Parameter is Incorrect"
Error Reference Number: {DB65561D-1ECC-4227-9361-BB662D71078A};User Name: admin@Native Directory
Num: 0x80070057;Type: 0;DTime: 8/24/2011 5:08:09 PM;Svr: HYPERION;File: CHsxServerImpl.cpp;Line: 2025;Ver: 11.1.2.1.000.3082;
Num: 0x80070057;Type: 0;DTime: 8/24/2011 5:08:15 PM;Svr: HYPERION;File: CHsxServerImpl.cpp;Line: 2361;Ver: 11.1.2.1.000.3082;
Num: 0x80070057;Type: 0;DTime: 8/24/2011 5:08:15 PM;Svr: HYPERION;File: CHsxServerImpl.cpp;Line: 4092;Ver: 11.1.2.1.000.3082;
Num: 0x80070057;Type: 1;DTime: 8/24/2011 5:08:15 PM;Svr: HYPERION;File: CHsxServer.cpp;Line: 1460;Ver: 11.1.2.1.000.3082;DStr: OpenApplication: DEMOAPP;
Num: 0x80070057;Type: 0;DTime: 8/24/2011 5:08:15 PM;Svr: HYPERION;File: CHsxClient.cpp;Line: 2417;Ver: 11.1.2.1.000.3082;
Did I do something wrong in the installation?

After upgrading to version 9.3.3, 11.1.1.3.50 or 11.1.2.1 this error could occur with the below scenario...
The cause was due to a program change in these upgrade version, with how logins work when accessing HFM via workspace. Any login to HFM that does not go through workspace, will inconsistently cause this error.
To resolve this issue in version 11.1.2.1, download and apply Patch 12865428.
Refer : Financial Management Error "The Parameter Is Incorrect" Appears Frequently in HsvEventlog.log After Upgrade to Version 9.3.3, 11.1.1.3.50 or 11.1.2.1 (Doc ID 1290122.1)

SQL Developer 3.0 error: The parameter is incorrect

I am running a virtualized the SQL Developer 3.0 on windows XP. Today I noticed that there was an error when I created a connection profile.
Source: oracle.dbtools.raptor.navigator.folders.DatabasesFilter
Message: The parameter is incorrect
Despite of the error, I was able to connect to the target database and had no problem with any database operations. The newly added connections were not saved upon exit. Any idea?

In another post on a different subject, Gravenstein posted the following:
<quote>There aren't very many files that RoboSource Control excludes. Let's see, a quick tally of my RH6 webhelp project shows the following to be excluded:
* projectname.cpd
* projectname.pss
* projectname.hhp
* projectname.trl
* ehlpdhtm.js
That's not very many, but the consequences of adding them to RSC are severe--things get very messed up, very fast. That's why I always let RH control the upload into RSC. Not an option if you're not using RSC, I realize.
</quote>
I don't work with source control but I would imagine that list applies to other source control programs and to RH8.
See www.grainge.org for RoboHelp and Authoring tips

[SOLVED] OSCDIMG Tool Does Not Work on Windows 10? ReadFile() fails with error code 87. (The parameter is incorrect) on ReFS Storage Space Mirror

Hello,
What could be the reason of OSCDIMG premastering tool not working in Windows 10?
I'm trying to rebuild ISO from the admin setup point and having problems with OSCDIMG failing to read files from the master folder:
E:\Images>bin\oscdimg.exe -bootdata:2#p0,e,b"D:\ISOFOLDER\boot\etfsboot.com"#pEF,e,b"D:\ISOFOLDER\efi\Microsoft\boot\efisys.bin" -o -h -m -u2 -udfver102 -lwinsetup D:\ISOFOLDER test.iso
OSCDIMG 2.56 CD-ROM and DVD-ROM Premastering Utility
Copyright (C) Microsoft, 1993-2012. All rights reserved.
Licensed only for producing Microsoft authorized content.
Scanning source tree (500 files in 15 directories)
Scanning source tree complete (950 files in 95 directories)
Computing directory information complete
Image file is 3591864320 bytes (before optimization)
Writing 950 files in 95 directories to test.iso
0% complete
ReadFile failed (\\?\E:\Images\ISOFOLDER\autorun.inf, off=0 len=800 status=103)
Error 87: The parameter is incorrect.
Thank you.
Well this is the world we live in And these are the hands we're given...

Figured it myself.
For some reason, the tool does NOT support source locations on ReFS formatted drives. Move the D:\ISOFOLDER location to NTFS formatted drive, and the tool works flawless:
E:\Images>bin\oscdimg.exe -bootdata:2#p0,e,b"D:\ISOFOLDER\boot\etfsboot.com"#pEF,e,b"D:\ISOFOLDER\efi\Microsoft\boot\efisys.bin" -o -h -m -u2 -udfver102 -lwinsetup D:\ISOFOLDER D:\TEMP\test.iso
OSCDIMG 2.56 CD-ROM and DVD-ROM Premastering Utility
Copyright (C) Microsoft, 1993-2012. All rights reserved.
Licensed only for producing Microsoft authorized content.
Scanning source tree (500 files in 15 directories)
Scanning source tree complete (950 files in 95 directories)
Computing directory information complete
Image file is 3591864320 bytes (before optimization)
Writing 950 files in 95 directories to D:\TEMP\test.iso
100% complete
Storage optimization saved 45 files, 16310272 bytes (1% of image)
After optimization, image file is 3577761792 bytes
Space saved because of embedding, sparseness or optimization = 16310272
Done
Well this is the world we live in And these are the hands we're given...

Error Message: "The parameter is incorrect" when trying to modify SSLs

Like I wrote in my subject line, RoboHelp pop-ups the error message “The Parameter is incorrect” when I try to modify any SSL.
What happens next, is that the “Print Document General” window opens, but does not allow me to select anything (the fields are blank).
If I close the window and open it again, it seems to work until I have to select the styles from our Microsoft Word Template.
Then the error message “The parameter is incorrect” appears again, and RoboHelp does not allow me to select anything but a stylesheet
(which is not what I need).
This is very strange, because not only until recently I was able to build Word documents and PDFs, but also my colleagues are able to
produce them out of my source.
Even the old projects, that I was able to build, now I cannot.
I do not have any problem in generating CHMs.
Until now I have tried everything I found in the forum:
I deleted the PSS file (also following the advice in your snippet number 14 from 10 – RoboHelp HTML –Features and Use).
http://forums.adobe.com/thread/120022
I reinstalled RoboHelp and the Adobe Technical Communication Suite (I also used CCleaner to delete the registries).
http://forums.adobe.com/thread/598335
I gave Administrator rights to all users in my computer (what seemed to work for some SSLs, but not for all)
http://forums.adobe.com/thread/870339
I am also looking at all programs that I installed since the last time I was able to build .docs in case there is a conflict, but I do not find anything!
My computer has Windows 7 installed and I use the Adobe Technical Communication Suite 3.5, with RoboHelp 9.
My Microsoft Office is 2010.
Can somebody please help me? Did someone have the same problem?
Thanks in advance.

Hi there
I know you said you reinstalled, but did you reinstall before or after you gave administrator rights to all users on your computer? And how many users *ARE* on your computer?
Often you need administrator rights to properly install things.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Contribute 6.5 the parameter is incorrect error

I have three clients who all have the same problem on the same day on different site. When they try to edit a page and add a link they get an error message 'the parameter is incorrect' - if they continue to add link from the pop up box Contribute crashes. Any ideas?

Not sure if you've tried, but you might get better/faster answers in the Contribute Forum: Contribute General Discussion

W7: Error creating Repair disk or image "...the parameter is incorrect (0x80070057)

Similar Messages

Maybe you are looking for