W7 Ultimate 32 bit English - error upon iso download that ENGLISH is not supported

I have a legitimate Windows 7 Ultimate 32 bit English DVD with product key sticker inside.
My computer however has no DVD player, so I figured I would download the ISO and create a bootable USB key for install.
Where can I download Windows 7 ISO? I have a Product Key.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/where-can-i-download-windows-7-iso-i-have-a/7d964b05-2be9-4800-bc7f-3ca30356fc3d?auth=1
Welcome to Microsoft Software Recovery
http://www.microsoft.com/en-us/software-recovery
When I select to verify my key I get this ridiculous error that ENGLISH is not supported....
Unsupported language error: The language you've selected is not available for the product you are eligible for. Please select a different language.
Is there a different site from which I can download a clean Microsoft copy of the ISO?
Alternatively I guess I could take the DVD and make an ISO from it on a different computer and create the usb bootable drive.
Suggestions are appreciated.
Since there are two DVDs (one 32 and one 64 bit) I tried to download the 64 bit one. Same error upon validation of key. Sigh.

Andy
The frist link was from 2012 and no longer applies. The second should work as long as it is not an OEM key. To try and figure this out please follow these instructions
Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

Similar Messages

I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say install to Applications but it's not there. How do I find it and can I put it in my dock?

I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say it would install to Applications, but it's not there. How do I find it and can I put it in my dock?

In Safari's preferences:
Look in the folder displayed where you see the arrow. The actual Downloads folder is found in your Home (user) folder.

Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message that X11 was not supported and directed to a sited to download XQuartz. Now when I try to launch WordSearch9 I get a message "X11 cannot be found.

Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message saying that X11 was not supported and directed to a site to download an update "XQuartz" which I did. Now when I try to launch WordSearch9 I get a message "X11 cannot be found". I did follow the instructions to download and install XQuartz, but there still seems to be a problem. Anyone have an idea?

Your report indicates Mountain Lion, but your footer indicates Lion. I'll assume you're on 10.8.2; on the current Mountain Lion version.
Rebooting is fine.
The posted diagnostics look like there might be a problem with the Xquartz install, or it is not starting, or it's not authorized for the sandbox. (But I don't know enough about that to be certain.)
Try launching X11.app directly from your Applications > Utilities folder, and see if that works, or if shows any dialog boxes, or that reports any errors.
If you had an Xquartz kit installed and it's not the 2.7.4 (current) Xquartz kit, then please update to that version. (I'm assuming that site is where you got your Xquartz kit from, too.)
I'd also suggest also discussing this more directly with the Xquartz folks via mailing list or the IRC channel, or collecting up the Xquartz logs and then posting a bug over at the Xquartz site; here are the details on bug reporting for Xquartz.

Java.lang.Error: JAX-RPC 1.1 method is not supported in WLS 8.1 clients.

We have some web services that run under OC4J 10.1.3.4. We have various JEE 'client' apps (JSF, servlets etc.) that use these web services. These JEE apps also run under OC4J.
We started a migration project from oc4j to weblogic 10.3.2. In phase 1 we want to move these JEE 'client' apps to weblogic. In phase 2 we want to move the web services themselves to weblogic with adjustments to the JEE 'client' apps as needed.
However we ran into an issue during this phase 1. Deploying these JEE 'client' apps to weblogic results in an error like this:
java.lang.Error: JAX-RPC 1.1 method is not supported in WLS 8.1 clients. If you are attempting to run an OC4J 10.1.3 JAX-RPC client in WLS, please see the Web Service Migration Guide for instructions.
We are including Oracle web services client libraries (http://download.oracle.com/otn/java/oc4j/1013/wsclient_extended.zip) in these JEE 'client' apps's war files because weblogic does not have them.
What part of Web Service Migration Guide is the above error message talking about? Do we have to re-generate the client side proxies for all these web services using weblogic's clientgen task in 'JAXRPC' mode? Many of these web services are doc/literal jax-rpc web services. Or does the migration guide recommend we migrate the web services first to weblogic? Any other specific information on working around this error message would be greatly appreciated.

Hi,
I had the same issue but I just managed to fix it. You must upgrade and/or regenerate you proxy. This creates new classes (possibily in a new package) that you must use in your code. I had this error because the classes directory was not clean after the rebuild and the old classes (in the old package) were still present, so the compilation was successful with the old classes. So clean your classes directories, regenerate your proxy and use the new classes in your code.
Regards,
Sylvain

My Iphone 4 is not letting me download anything. It says that paypal is not supported on my device. Anyone know how to fix it?

My Iphone 4 is not letting me download anything. It says that paypal is not supported on my device. Anyone know how to fix it?

I'm having the same problem. Out of the blue this morning, my phone is telling me I cannot download any apps because paypal is not supported. I've been usinf paypal forever for iTunes/Apps. I tried the re-boot. Still getting the error. Any other ideas?

Error Message: This type of file is not supported, or the required codec is not installed?

I am trying to get media from my computer, and I only receive this error message :
This type of file is not supported, or the required codec is not installed?
What should I do? I have a window 8 laptop. My video files are from my itouch/ipod. I am using Premiere Elements 7.
I have used this software with success before. HELP would greatly be appreciated!

darlingdarleen
Did both laptop 1 and 2 have QuickTime (latest version or any version) installed on the computers with Premiere Elements 7 when you got this "this type of file......" message?
If you go to the opened Premiere Elements 7 projects involved and look at Share/Personal Computer/QuickTime, do you find that QuickTime Presets are shown and that you find export settings choices under the Advanced Button/Video Tab and Audio Tab?
Look at the file name of the video. Do you see any irregularies in the name of the file, dots and such?
If you record new iPod footage, open a new Premiere Elements project, and import that iPod footage, do you still get the error message? Putting aside, iTouch, what model iPod are these videos coming from?
Thanks.
ATR

Error message "Live file system repair is not supported."

System won't boot. Directed to Disk Utility to repair but get error message "Live file system repair is not supported." Appreciate all help.
Thanks.
John

I recently ran into a similar issue with my Time Machine backup disk. After about 6 days of no backups - I had swapped the disk for my photo library for a media project; I reattached the Time Machine disk and attempted a backup.
Time Machine could not backup to the disk. Running Disk Utility and attempting to Repair the disk ended up returning the "Live file system repair is not supported" message.
After much experimentaion with disk analysis softwares, I came to the realization that the issue might be that the USB disk dock wasn't connected directly to the MacBook Pro - it was daisy-chained through a USB Hub.
Connecting the USB disk dock directly to the MBP and running Disk Utility appears to have resolved the issue. DU ran for about 6 hours and succesfully repaired the disk. Consequently, I have been able to use that Time Machine disk for subsequent backups.

I purchased Elements 13. When I tried to install I get the error message that it is not supported by Vista. Now what do I do?

I purchased Elements 13. When I tried to install it I get the error message that it is not supported by Vista. What do I do now?

If you can't install Windows 7 or higher or get a new computer with Windows 7 or higher, you won't be able to run Photoshop Elements 13.
There are many inexpensive refurbished or "off lease" computers available at very reasonable cost. Here is one example (scroll down):
Computers & Tablets, Desktop PCs, All Desktop PCs, Refurbished - Newegg.com

HT4623 When I plug my ipad to itunes i get the error message that it is not supported and I have to go to itunes and get itunes re-installed? i never had this problem before. if i do this will i loose all my files, music, etc?

When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install. if i do this will i loose my files and music?

No, you should not lose anything.

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i have reset the ipad and restored it to no avail

Exchange 2010, khi: failed to execute Troubleshoot-DatabaseSpace.ps1 Error formatting a string: Format string is not supported

Hi,
Exchange 2010 MP fails to run Troubleshoot-DatabaseSpace.ps1. Results in a Warning with "Error formatting a string: Format string is not supported". The EventNumber is 402. The Microsoft article it points to is useless at http://technet.microsoft.com/en-us/library/749e0eac-ebb2-41e3-8fa2-4a03a1bd3571.aspx
Run ".\Troubleshoot-DatabaseSpace.ps1 -Server MailboxServer.domain.com -MonitoringContext" and works fine.
Any help appreciated.
thanks

Hi,
Before the newer MP release, we can disable these 4 monitor via override and this should not run the Troubleshoot-DatabaseSpace.ps1 :
KHI: Failed to execute Troubleshoot-DatabaseSpace.ps1.
KHI: The database copy is low on database volume space and continues to grow. The volume is under 25% free
KHI: The database copy is low on database volume space and continues to grow. The volume has reached error levels under 16% free.
KHI: The database copy is low on database volume space and continues to grow. The volume has reached critical levels 8% free.
Alex Zhao
TechNet Community Support

Ask your question.I have just receive a billing for a download that I do not want. How do I return it?

I have just received a billing for a download that I do not want. How do I return it?

According to Apple, all sales are final.
http://support.apple.com/kb/HT3641
You indicated the app was free so you could not have been charged for it.

ERROR:MapLib:973 - Tri-state buffers are not supported in this architecture.

Hi,
I face a ERROR:MapLib:973 problem with inout port in a pcore component.
I need ton instantiate an inout port at the top level to communicate wih my peripherical.
This inout port is driven by an XPS IP core (pcore).
The .mpd is :
PORT fdata = "", DIR = INOUT , VEC = [31:0], ENABLE=SINGLE, THREE_STATE = TRUE,TRI_I = fdata_I, TRI_O = fdata_O, TRI_T = fdata_T
PORT fdata_I = "", DIR = I , VEC = [31:0]
PORT fdata_O = "", DIR = O , VEC = [31:0]
PORT fdata_T = "", DIR = O
The .vhd is :
fdata_o : out std_logic_vector(31 downto 0);
fdata_i : in std_logic_vector(31 downto 0);
fdata_t : out std_logic ;
I got ERROR:MapLib:973 - Tri-state buffers are not supported in this architecture messages for each
signals of my fdata PORT, while mapping !
Thanks for you help.

What device are you targeting, and what version of the software are you using?
I target a xc7k325t-fbg676-2.
I use ISE 14.3 form platgen to xst and 14.7 from map to bitgen.
What does your top level HDL (verilog or VHDL) file look like (where the IO must be instantiated)?
It is a .vhd in whitch i wrapp my top XPS core, described by .mhs
The problematic IO port is instantiated into the mb_core.vhd (generated by XPS).
If i open it, i could see that the tool correctly infer the corresponding IOBUF's :
component mapping :
fdata_I => FX3_DQ_I,
fdata_O => FX3_DQ_O,
fdata_T => FX3_DQ_T,
One IOBUF infered:
iobuf_1 : IOBUF
port map (
I => FX3_DQ_O(31),
IO => FX3_DQ(31),
O => FX3_DQ_I(31),
T => FX3_DQ_T
Top level port :
FX3_DQ : inout std_logic_vector(31 downto 0);
THEN FX3_DQ signal is dirrectly branched in my upper level (top level) vhd file, with the same name.
What do your constraints file look like (where the pin number and names get declared)?
The port is only constrained in .ucf, like that:
NET FX3_DQ[0] LOC = "B24"| IOSTANDARD = LVCMOS33 ;
NET FX3_DQ[31] LOC = "G26"| IOSTANDARD = LVCMOS33 ;#Bank 14

When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

TLCMediaDesign wrote:
I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary.

W7 Ultimate 32 bit English - error upon iso download that ENGLISH is not supported

Similar Messages

Maybe you are looking for