W7 won't load or unstable..help

I have just put together a new computer using an MSI GD80 motherboard, OCZ Agility 60Gb HD, i5 750 CPU, 4GB Mushkin 12900 mem, Corsair H50 CPU water cooler and HX850W PSU. On initial boot up I went into the bios and set the Integrated Peripheral IDE/AHCI setting to AHCI and started to load windows (Win 7 Home Premium). The loading of windows went ok until is started to open the window files and then it froze. I made several attempts to load windows but the computer always froze during the installation. I checked and updated the OCZ hard drive firmware to the latest, ver 1.5, updated the bios to ver 1.7 but still the same results. I put the SSD hard drive in a friends computer and windows would load fine so I am assuming it's not the hard drive but I tried a new WD 500GB drive with the same results. I replaced the motherboard but still the same thing, I tried a another CPU, same thing. I removed one stick of memory, leaving one 2GB in DIMM 1 and windows loaded. I started to load drivers but the computer froze, now with the OS installed. The computer will boot into windows but is very unstable and will freeze up after about ten minutes. I removed the motherboard and set it up outside the case using the Intel CPU fan for cooling, using different SATA cables and none of the case connections, same thing.
I did a quick search on this forum and found a thread describing the same issues with the same CPU, motherboard, and memory combo I have but unfortunately there was never a post showing and final result but hinting at the memory being the problem. The default memory timing is 9-9-9-24 at 1.65V. I tried to reset it to 7-9-7-24 as Mushkin suggests but I've had no luck.
All the temps look good and I'm running the bios at ver 1.5 right now.
Can anyone help?

Quote from: JaymanS on 17-March-10, 08:40:49
The Mushkin ram is their Blackline PC-3 - 12800. The settings listed on each module is 7-9-7-24 @ 1.65v The default(auto) settings are 9-9-9-24
Try the default timings but back of the voltage some. MSI specs are 1.5 volt ddr3. Mushkin's cut sheet for the memory, if this is the correct cut sheet, http://www.mushkin.com/Memory/Blackline/996659B.aspx, gives range of 1.5-1.7.
Would help if you would give a specific Mushkin module number, "Blackline PC-3-12800" is not too specific.

Similar Messages

Will see my library but won't load anything? Help.

I just got my new apple tv unit. I can get to the internet and I can see my library but it won't load. Any help is appreciated.

Welcome to the Apple Community.
Check your Firewall and/or your security software is allowing access for iTunes.

When I'm in school, the pages in Safari won't load. Please help?

When I'm in school, the pages in Safari won't load. Please help?

When I'm in school, the pages in Safari won't load. Please help?

Flash won't load. Please help?

Flash player won't load and when I right-click it says movie not loaded. I have windows 8 64-bit and the latest version of Flash Player. Can you help?

It works OK for me in Firefox. Which browser(s) have you tested it on?
Flash form scripts may be conflicting with banner scripts. I don't know. Also, you have some validation errors on the page. Start by fixing those.
HTML Validator - http://validator.w3.org
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

TS1702 My millionaire and friends game won't load onto my iPad or iPhone 5? It was working in the beginning but now it won't even load. I have restarted my device & deleted and reinstalled the app several times and it still won't load? Please help

Millionaire and friends game not loading! Please help! I have tried restarting the device & deleting the app and trying to reload but nothing works? I also tried to email the creators of the app but the email address for tech support bounced back to me so its obviously not a good email??

I tried to email the developer (Canada) but the email for technical support is not a good email. My email got returned to me undeliverable? Not sure what to do next? I also want to get the game going again cause I made purchases to get more coins to play the game & now I can't even use it? Very frustrating!!!

I have Photoshop for the IPad and my file won't load, can anyone help?

I have the iOS app for adobe Photoshop and I stopped working on my project for a bit, went back to access it (I did save before hand) and it won't load, the loading animation is all that shows and nothing else. It's been doing this for 30 minutes or so. I've tried refreshing, shutting the app and turning it on, shutting off my iPad and turning it on again and nothing.

We don't deal with IOS applications in this forum at all, only with Photoshop proper for Mac and for Windows.
Are you on something like Adobe Photoshop Touch for tablet?
Try finding the forum for whatever your application is on the forums/community directory:
https://forums.adobe.com/welcome

I just upgraded to Safari 5.0.6 and my gmail now won't load. Please help.

I just upgraded my Safari to 5.0.6 (using Mac OS X 10.5.8) on my MacBook Pro and now my G mail account won't load...all I get is a blank page. G mail still loads with Firefox (which, for some reason, I do not have "permission" on my laptop to upgrade). I have deleted the cookies, cleared the cache, but still can't get G mail to work. Does anyone have a solution? Thanks so much.

Can you easily do this with Mac mail?
Yes you can.
Open Mac Mail. From the menu bar click Mail / Preferences then select the General tab.
Then select Accounts from the menu then the Account Information tab.
Click + (plus) under the Accounts window on the left.
Enter your name, your Gamil user name and password then click Create.
To start a new mail window, from the menu bar click File / New Message
Click the pop up menu next to: From
Select your Gmail account.
Click Attach form the new mail message window to include photos or links or just drag items to the window from your Desktop.

Aperture won't open, library won't load. Please help!!!

My Aperture won't load. My Safari doesn't work either, but I care more about recovering my Aperture photos. I can do without Safari. Here is the problem report:
Process:         Aperture [14235]
Path:            /Applications/Aperture.app/Contents/MacOS/Aperture
Identifier:      com.apple.Aperture
Version:         3.4.5 (3.4.5)
Build Info:      Aperture-320090000000000~1
Code Type:       X86-64 (Native)
Parent Process: launchd [181]
Date/Time:       2014-01-17 15:24:36.725 -0800
OS Version:      Mac OS X 10.7.5 (11G63)
Report Version: 9
Interval Since Last Report:          76427 sec
Crashes Since Last Report:           1
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      74929CF4-B435-4C2D-875E-596F2DDB8E2C
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/iLifePageLayoutCore.framework/Versions/A/iLifePageLayoutCore
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: image not found
Binary Images:
       0x1012e6000 -        0x101a43fff com.apple.Aperture (3.4.5 - 3.4.5) <C0ED95AC-8B39-380E-91E4-6B7BB3DD013F> /Applications/Aperture.app/Contents/MacOS/Aperture
       0x101c66000 -        0x101c6fff7 com.apple.PhotoFoundation (1.0 - 20.12) <9E3EA726-0AE7-3A40-AF03-EA7BDF21C099> /Applications/Aperture.app/Contents/Frameworks/PhotoFoundation.framework/Versio ns/A/PhotoFoundation
       0x101ce5000 -        0x102243fff com.apple.RedRock (1.9.4 - 321.3) <4685E533-6C92-372F-8F28-83BDD4AF5082> /Applications/Aperture.app/Contents/Frameworks/RedRock.framework/Versions/A/Red Rock
    0x7fff60ee6000 -     0x7fff60f1abaf dyld (195.6 - ???) <C58DAD8A-4B00-3676-8637-93D6FDE73147> /usr/lib/dyld
Model: MacBook3,1, BootROM MB31.008E.B02, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.24f3
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7FF70000, 0x00004B363435365536314535363637460000
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7FF70000, 0x00004B363435365536314535363637460000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9120822AS, 120.03 GB
Parallel ATA Device: MATSHITADVD-RAM UJ867PD
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0229, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
What can I do to get my Aperture library back?
Thanks!

My Aperture won't load. My Safari doesn't work either, but I care more about recovering my Aperture photos. I can do without Safari. Here is the problem report:
Process:         Aperture [14235]
Path:            /Applications/Aperture.app/Contents/MacOS/Aperture
Identifier:      com.apple.Aperture
Version:         3.4.5 (3.4.5)
Build Info:      Aperture-320090000000000~1
Code Type:       X86-64 (Native)
Parent Process: launchd [181]
Date/Time:       2014-01-17 15:24:36.725 -0800
OS Version:      Mac OS X 10.7.5 (11G63)
Report Version: 9
Interval Since Last Report:          76427 sec
Crashes Since Last Report:           1
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      74929CF4-B435-4C2D-875E-596F2DDB8E2C
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/iLifePageLayoutCore.framework/Versions/A/iLifePageLayoutCore
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: image not found
Binary Images:
       0x1012e6000 -        0x101a43fff com.apple.Aperture (3.4.5 - 3.4.5) <C0ED95AC-8B39-380E-91E4-6B7BB3DD013F> /Applications/Aperture.app/Contents/MacOS/Aperture
       0x101c66000 -        0x101c6fff7 com.apple.PhotoFoundation (1.0 - 20.12) <9E3EA726-0AE7-3A40-AF03-EA7BDF21C099> /Applications/Aperture.app/Contents/Frameworks/PhotoFoundation.framework/Versio ns/A/PhotoFoundation
       0x101ce5000 -        0x102243fff com.apple.RedRock (1.9.4 - 321.3) <4685E533-6C92-372F-8F28-83BDD4AF5082> /Applications/Aperture.app/Contents/Frameworks/RedRock.framework/Versions/A/Red Rock
    0x7fff60ee6000 -     0x7fff60f1abaf dyld (195.6 - ???) <C58DAD8A-4B00-3676-8637-93D6FDE73147> /usr/lib/dyld
Model: MacBook3,1, BootROM MB31.008E.B02, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.24f3
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7FF70000, 0x00004B363435365536314535363637460000
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7FF70000, 0x00004B363435365536314535363637460000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9120822AS, 120.03 GB
Parallel ATA Device: MATSHITADVD-RAM UJ867PD
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0229, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
What can I do to get my Aperture library back?
Thanks!

All the pictures in my messages won't load. Please help

the attachments are there but they won't load so I can't view them.

Make sure you have a back-up before doing this. This will erase your phone. To make sure you have a backup,go to Settings, iCloud, Back-up, and under 'back-up now,' you should have a time of your last back-up. Once you confirm you have a back-up, follow this article to restore from an iCloud back-up. I would go back to one (back-up that is) that you know had the pictures showing up (but I think any will do the trick).

Gallery won't load pics. Help please

Hello, every I would dearly appreciate it if some one could
please tell me, what I need to do to correct my problem. I uploaded
my Gallery to my server and it won't display the pictures but it
does work on the local drive. It just shows like the siloulltes of
the Thumbnails please see.... Please Help!

Hey thanks solved it! It was the loading picture file
extensions as .JPG onto the server instead of .jpg with was
changing file path.

After erase and install my photo library won't load - please, please help

I hope you can help. I backed up my mac then installed snow leopard - I had many issues with this and decided to erase and install normal leopard. I copied the iphoto library from my ext. HD to my pictures folder and thought once I opened iphoto that they would load but they haven't. I looked in my pictures folder and there were two iphoto libraries: the one I just copied and another much smaller one with (original) by the side of it. I did the whole hold down 'apple + control' on starting iphoto and 17 photos imported, I presumed these came from the (original) library and so I moved that library out of the pictures folder. I started iphoto again holding 'apple + control) and again the same 17 photos. I know my photos are here somewhere and they are so precious to me. I would so grateful if someone could help.

Welcome to the Apple Discussions.
To choose a Library is simply hold the +option (or alt)+ key on launch.
Regards
TD

When I open Firefox, it goes to a blank page instead of google, like I had it set up. When I go to a bookmark, nothing. It won't load anything. HELP!

When I open FF, it used to go to google. Now, I just get a blank page with the tab that says, "New Tab". When I click on the home button (suppose to go to google), it will change to "connecting..." for half a second but remain on the blank page returning to "New Tab". It is set to not use a proxy as it should be. It is not set to work offline. I do not have a firewall preventing it from accessing the internet. IE works and I have no problems there.

hi cnlbell,
Have you tried going to the General Preferences tab and verifying that google is set as you home page? I'd suggest you try setting about:home as your home page. It's a cool FF page with a google search bar. Then tell Firefox to display your home page on startup. These options are all in the General Preferences panel. Try that and let me know how it goes!
Hopefully this helps!

After update iPod safari won't load website anymore. help?

After I recently updated my iPod(2g) some websites that I could visit on safari before, now only load halfway if that makes sense. Then the screen freezed and I'm back to homepage. What do I do?

Try resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

For some reason both Firefox and Thunderbird says my profile is missing and the apps won't load. Please help...I have tried reloading FF but it did not help.

It just started today....but I can't get in to either Firefox or Thunderbird. Says my profile is missing or lost. That is the total message. I did not know I had a profile or do I know how to look for it. It is odd both apps failed at the same time.
Thanks
Bob

I'm sorry you're expierencing this problem. Open the Profile Manager by following the directions in the article, [[Managing profiles]]. If a profile shows up, select it and hit start Firefox.
If no profiles show up, you need to follow the direction on the same article to set up a new profile. Although, I am not sure if it is possible to recover your old profile.

I downloaded 21 Jump Street for a road trip the other day, and it won't play. I click play and a black screen appears and then it says "could not load movie." I have tried rebooting it, and it won't load. Please help.

I can't figure out how to get this movie to play - I have another movie downloaded and I had no problems. Any tips?

Thanks for this mha007 - I can now open FF with a new profile. Can I copy my settings from the old profile or will this bring over the same problem, maybe a corrupt file. If it would bring the same problem, is there any way I can check which file is corrupt, apart from taking them over one by one?

W7 won't load or unstable..help

Similar Messages

Maybe you are looking for