W7 x64 - Problems installing drivers Nokia

Hello!I have the PC with the longtime-established Windows 7 x64, phone Nokia 6120c (USB, RM-243, V 07.10) and driver for the connection of all this.
Until recently all worked fine, and then every time you connect your phone PC started shaking driver on the phone from Center Update Windows (and so every time !!!). I did not bother me.
Today my PC is not seen phone.
Connecting - loading the driver for your Nokia 6120 classic USB Phone Parent, then the following message:
"Windows will detect the drivers for this device, but when you try to install these drivers the error occurred.
Could not load the device driver. Perhaps the driver is corrupted or missing. (Code 39) "
Driver downloaded from the center of updating Windows, and from Nokia site, and from disk ... Even rebooted the PC several times. System Restore does not help.
What?
P.S. Perhaps this is due to the disconnection of electricity yesterday ... The phone was connected to a PC.
Screenshots:
http://i027.radikal.ru/1003/ef/9b06b0140e4a.png
http://s61.radikal.ru/i171/1003/0b/b376a700193a.png
http://s04.radikal.ru/i177/1003/1f/d6974ddd3b2e.png
http://s002.radikal.ru/i199/1003/52/18a793254fbf.png
http://i060.radikal.ru/1003/77/c7f5e6b926fb.png
http://s15.radikal.ru/i189/1003/4f/de3a38dea83f.png
P.S. Sorry for my English, I'm from Russia, I use a translator.

You're using an outdated version of Nokia PC Suite. Uninstall all Nokia related software and drivers. Reinstall the latest version of PC Suite in XP compatibility as admin. Turn off antivirus during install and don't use USB hubs.
http://europe.nokia.com/support/download-software/nokia-pc-suite
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

Problem installing drivers for on-board Realtek sound

Using Neo2
I keep getting the following error when Windows XP tries to install the driver:
"Cannot Install this Hardware
There was a problem installing this hardware:
Realtek AC'97 Audio
An error occurred during the installation of this device
The data is invalid"
I've tried all the usual stuff of ensuring that the software is installed prior to the PnP wizard. I've even tried installing the NT4 (non-PnP) drivers (which installed ok and appeared to work, except that the sound device wasn't recognised).
I've tried the latest patch to no avail. Is my H/W knackered?
Any input gratefully received.
Cheers,
/D

Ahem,
I thought what I had specified was relevant to the query, but here goes:
-Motherboard type and model - MSI K8N Neo2 Platinum (939)
-Bios type and revision (AMI rev 1.9) - Phoenix - AwardBIOS v6.00PG Version : Nvidia - 42302e31
-CPU type and model - AMD Athlon(tm) 64 Processor 3000+ (939)
-Memory name, model and quantity - not sure but 3200, 2x512Mb Generic. Seems stable
-Video card name and model plus drivers and version - Hercules 3D Prophet 9600/9600Pro Series (SE) Driver Version : 5.2.3790.2
-Power Supply name, model and the amp rating for the +3.3V, +5V and +12V lines plus any limitation on the +3.3/+5V combined watts. This information can be found on a sticker on the side of the supply. - sorry but I haven't got the time to open the case up. It's a decent 400W jobbie. I've previously checked the various voltages and they seem OK.
-Hard Drives: Manufacturer, type and size and which IDE or SATA ports they are located on WDC WD800JB-00ETA0 (Sata 6) MAXTOR 6L040J2 IDE 1 (master)
-Optical Drives: Manufacturer and type and which IDE ports they are located on CDROMLITE-ON_LTR-48125S______________________1S05____\5&1DE79660&0&0.0.0 on 2nd Ide master
-Operating system and service pack level - WinXP SP1 and hotfixes.

Problem installing drivers on my HP Photosmart Premium C310a

For some reason, out of the blue my printer stopped printing from the computer. After going through the HP Troubleshooting and being told to download updated drivers, I have downloaded and tried to install drivers for my wireless C310a printer but keep getting told that the installation failed because it can't locate the C:\Users\Jeanelle\AppData\Local\Temp\7zS655A\Setup\hpqbhp01.exe
I don't think I can use the solution provided using the cd since it is a wireless printer and never used the cd to initially set up and install the printer in the first place. I appreciate your assistance in addressing this problem.
This question was solved.
View Solution.

Hello luvridinghorses!
I will do my best to help you to get your printer printing again. Based on the information you have provided, the error indicates the installation is looking for a folder in your "temp" files which is where downloads go. I think you may have success using the software disc that came with the printer if you still have it. Give it a try and if that doesn't help you, what is the operating system of the computer you are trying to install this printer on and what is the printer's IP address?
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Problems installing drivers for my nomad jukebox 1

i have a nomad jukebox 0gb and im having trouble getting it set up on my computer. im running win xp pro, and my jukebox is running firmware version 2.96. i dont have a cd, so i downloaded and installed the drivers, but my computer still does not recognize the jukebox and treats it as new hardware every time i plug it in.
strangely, when i plug it into my clamshell running os 9.2, the jukebox is recognized in itunes. i used itunes to put an mp3 on it (even though it was just a converted aim sound file).
i have formatted the jukebox, but am still facing the same problems, and am not sure what else i can do. thanks.Message Edited by monstour on 06-24-2005 0:32 AM

i have tried the jukebox on multiple computers, including other desktops and laptops with xp pro, and it has worked.
something else i noticed is when i try to install the drivers, the installer is skipping the regsvr32.exe file in the windows folder.

Problem installing drivers, no admin rights on admin user...

The iMac 27" recently bought with Snow Leopard was installed with one user, with admin access. Now when trying to install the 10.6 drivers for our digital press it claims that the user needs administrator access. I have no idea how to remedy this. The same drivers was installed on another new iMac with the same setup, and worked flawlessly. He also has problems with other software solutions regarding rights.
Anyone have any idea what could be wrong? I do not wish to do a clean install on it as the user spent a couple days setting the machine up for production...

I'm still having a little trouble understanding the situation. Are you saying the driver software is delivered as a .pkg file & opens Apple's Installer.app when you double-click it? If so, do you see the familiar Introduction or 'welcome to the installer' window with the "Continue" button, & then at a later step the error message about needing admin access, or do you immediately see the error message?
Or does the software include its own installer app? (IOW, on double-clicking the file do you see "Installer" next to the Apple menu item in the menu bar or something else?)
If the Apple installer is used, running a permissions repair on the iMac's startup drive may help. Also, you might check with the supplier of the software for any updates or known problems with Snow Leopard and/or download the package again if that is an option.

Problems Installing drivers/Softw

Hi,
I have a Muvo V00 2gb. Recently I had to re-install my operating system and realized I do not have the cd for the player. I went to the downloads and installed Creative mediasource 5. Then I installed the firmware for the player itself following the instructions. The problem is my computer reads the player as a flash dri've and doesn't recognize it as a muvo v00. When I exit mediasource I get a send error report message as if it had crashed. I have tried re installing everything 3 times while wiping out everything with add-remove programs in between. I also noticed that the lyrics editor doesn't come with the download version and was wondering where I could get that too.
I am running windows xp sp2 (in the process of obtaining sp3)
Thanks,
Aiden
Edit: I have read the FAQ sections but the link for missing cd dons't seem to work for me.

You need to get the following:
. Creative Zen and Jukebox Driver Upgrade version .30.03
2. Creative MediaSource Player/Organizer 3.30.2
3. Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource
Install . then connect the player to the PC. Then install 2. and 3. (the player must be connected for 2. to verify you have a Creative product).

Has anyone else had problems installing drivers for the Canon MF4570dn?

I recently purchased a Canon MF4570dn multifunction printer, to be installed on my network at home. It works very nicely with my wife's Windows 7 box.
On the other hand, I cannot install the driver software on either of my Macs (iMac i7 running 10.6.8 or G4 running 10.4.11). The installer fails when it gets to the point of running its internal scripts, and provides a proposed "solution" of "Call the software provider."
Canon technical support is unable to help. I have reset printers in the system preferences, I have downloaded the installer package multiple times from their web site, I have repaired permissions, all to no effect. Their final suggestion is "Call Apple Technical Support and have them perform a 'profile reset'." (I've never heard of such a thing, in 27.5 years of owning Macintoshes. Has anyone else????)
So my question is this: If you have one of these on your system, did you have any issues getting the drivers installed? If so, how did you overcome them?
Thanks,
Rich Alderson

More negative feedback on these Canon MF4570dn devices elsewhere on the support boards. Buyer beware!
https://discussions.apple.com/message/16944619#16944619
https://discussions.apple.com/thread/3524366

Problems installing drivers for my pretty old soundcard. (Thread detailed).

Hello, my friends audio card for some reason stopped to work, so I gave him my old card. Unfortunately, I have lost my CD.
(And yes, I have read the sticky thread Sound Blaster FAQ).
Here is what I did:
Wrote all information that might get useful from card to PC, result:
Creative Audio
EMU0k-NEF
Tech 97
oo0E3020
CT4830
32GPC05D98A
The bolded like "CT4830" seem to be the only useful word I managed to get from my card.
Then it was searching, a lot of googling, a lot of sites trying to offer their perfect "driver scanner", if I searched for etc EMU0k, scamming and virus sites would automatic manage to track the exact component I was looking for. While creative.com wasn't even top 50.
Back to point: I went on creative.com, I personally think it is a very messy site, I click on support, download, and I see a list of products, I choose Sound Blaster, and I get a few models to pick from.
Now here I was stuck for a long time, I could not find my model there, it was only those new "awesome" models, so I had to find a little, almost impossible noticeable link at the bottow "cant find your model, click here" something like that. With small letters. NOT VERY USERFRIENDLY!
And then I get to a list, I know, I have model CT4830, and I know "Audigy" is written on the card. But I could not find it in any of the audigy categories, some categories was missing images, so this was also a very tricky part.
Then I found a list which could help me get the full name of my audio card, and I managed to catch up that CT4830 for some reason has the full name "Sound Blaster Li've! Value/Player Compaq /Intel/IBM/NEc"
And this helped me a little (I think), since I had to look in the Li've category, even though it also was Audigy, it was not stated in the full name of the card.
Now I found the most similar thing in "li've" category, called "Sound Blaster li've! Value". Nothing about compaq, intel IBM or nec or anything like that, just Sound blaster li've! Value.
I downloaded the driver, released in 2003, I had an option to go for 2005 64bit XP driver, or 2003 driver (no OS mentioned in describtion), I assume the driver was for 32bit, since there was already another newer stated driver for 64bit.
I managed to install this driver, it runs fine, no error messages occurs in the installation.
It asks me to reboot, and I reboot, and on next startup, still nothing happens.
So after all this research, what have I done wrong? Wrong driver? Which is the correct driver? Where can I download it's
I am sorry for my frustrating behavior on this post, sorry, I just don't know what to do

O You can find some of the original installation CDs in ISO form on Badboy's FileFront site. I believe this one is for your SB Li've value card as well as for some Audigy cards. These are for WinXP and older OSs.

Having problem installing drivers

hi im using macbook pro 13inch 2012
i was trying to switch to windows using bootcamp ...but everytime when i use boot camp it fails to download drivers
i switched to windows 7without drivers is there any way of downloading drivers without bootcamp assistance ??????thanks in advance

Post in the Boot Camp forum.

Problem installing hardware N95 8GB

I have loaded PC Suite successfully but when I try to connect phone by USB cable I get the following "Cannot install this hardware. Problem installing hardware Nokia N95 8GB. An error occurred during the installation of this device. The name is already in use as either a service name or a service display name" The phone is showing in taskbar with red circle and x. Anyone help thanks in anticipation.
Solved!
Go to Solution.

When I click on Go to Option, page is not open.
I have the same problem with my nokia N73 (V 4.0736.3.2.1) (RM-133) (Z5.01).
When I attach My phone with pc via usb, window shows
'Found New Hardware' - 'Nokia N73'
then - 'Nokia N73 USB Phone Parent' then
Found New Hardware Wizard opens
and it shows :- Cannot Install this Hardware
There was a problem installing this hardware:
Nokia N73 (or sometimes It shows Generic Phone)
An error occurred during the installation of the device
The name is already in use as either a service name or a service display name.
PLEASE SOLVE MY PROBLEM. THANK YOU

Problems finding drivers for late 2008 MBP Windows xp 64

Hi,
I'm having problems installing drivers for Windows xp 64 bit pro. The main problem is that i have lost the leopard install disc that came with the mac. As far as i know the drivers located on the leopard install disc 1 are compatible with Win xp 64?
Does anybody know where i can get a complete list of all the correct drivers to download? I've been doing trial and error driver installation for about 1 week now and getting really upset that i have not been able to resolve this issue.
Any help greatly appreciated,
Thanks in advance,
Fredrik Christensen

Fredrik Christensen wrote:
Hi Stefan,
Thanks for replying.
Perhaps i am thinking of Windows Vista 64 then? I'm pretty sure that i saw a post somewhere which said that Apple released 64 bit drivers with the latest leopard install disc for the new MBP.
Fred
Hi Fred,
yes, Vista 64-bit is supported on some MAcs. See here: http://support.apple.com/kb/HT1846
Also Applee sems to have released newer versions of the retail Leopard Installation discs, which include Vista 64-bit drivers http://support.apple.com/kb/HT1999
Regards
Stefan

Nokia 5800 problem with drivers windows 7 32-bit

Hi, i have problem with drivers for 5800 in windows 7, all drivers except modem and cdc comms work, how can i update drivers for that, i have installed lates nokia suite 3.3 and newest cable drivers, i try drivers 6.x but then my 5800 is not recognized, what is the solution?

Hi:
You can use the W7 x64 drivers from the 250 G2 support page. They have the 32 bit driver files too.
That would be for all but the graphics if your G2 has a Pentium or Celeron processor.
If your notebook has one of those processors, then download, unzip and run the graphics driver setup exe file from the link below.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23889

Problems installing Belle on nokia N8 - connection...

SOLUTION : in combination with win XP SP3 and nokia suite, trying to upgrade the N8 to belle, you get the error message connection lost. Try a diffretn computer with win 7. Install the nokia suite and and then upgrade the phone. This solution worked for me.

Paddyg_123 wrote:
Hi
I've tried updating my N8 with my PC a few times now, I get past the backup then into the installation phase, then the phone powers down and doesn't restart, windows does its dinging thing a few times noting disconnections and connections etc, and then I get a failed message in Nokia Suite saying that the connection has been interupted and gives me a few steps to follow to resolve, I follow those steps to the letter, which are
Disconnect phone
Hold power button for 10 seconds
Reconnect Phone
Wait
After a long waitI pressed ok and it went to the install phase, a few seconds later, it says no and gives me the same steps to do. After doing this a few times, I booted my phone as it was still off at this point. The device booted and seems to be ok. I then tried again with the install from scratch and same thing happened. Device is still ok, and seems to be functioning fine, but it is still Anna.
Device Details:
Type - RM-596
Code - 059C5QB
Provider - O2
Nokia Suite Version - 3.3.84 Beta
I will be uninstalling this beta version and trying again on another PC in a few hours when I get home, at the moment I am using my laptop and report back later with any changes. If you can help in any way or suggest any advice I would be grateful.
Thanks
Paddy
i have got exactly the same problems, still havent found a fix either

IMAC 27inch VistaUltimate Problem installing Sound/Video Drivers

yeah im having big problems instaling the sound driver/video drivers.
i tried installing both of the ati radeon drivers that come from there website neither worked.
ATI Radeon HD 4670 graphics processor with 256MB of GDDR3 memory
ATI Radeon HD 4850 graphics processor with 512MB of GDDR3 memory
the sound driver doesnt say it has a problem but the sound doesnt work?
i couldnt find drivers on the apple website for microsoft ? where do i go?

You might get some help if you posted how you are running Vista. If you are using Bootcamp navigate to the Bootcamp forum. If you are using software such as Parallels or Fusion navigate to their forums. With due respect this is a Mac forum not a MS Windows forum.
Regards,
Roger

Installing x64 and x86 drivers for a HP Laserjet p1505n printer on Windows Server 2008

How do you install both x64 and x86 drivers for a p1505n on a 2008 server? I have now managed to install 64 bit drivers but can't install x86 drivers in the normal way using Additional Drivers from the Sharing tab. I am also trying to do similar for a laserjet 1022n printer.

On the 2008 Server x64 I installed the FULL driver package 163mb.
I installed the HP P1505n on Server 2008 and made sure that was working.
Then I went back in and did the Additional Driver thing and when it asked for the driver for x86 I went to the
C:\hp_P1000_P1500_Full_Solution folder and scrolled to the bottom and there was the x86 XP driver.
I hope this helps someone.

W7 x64 - Problems installing drivers Nokia

Similar Messages

Maybe you are looking for