W700ds add Monitor for AutoCad.

Hello
I have a Lenovo W700ds, Machine = 2757 - CTO, Windows 8.1 Pro, 64 bit System.
with a Nvidia Quadro FX 3700M Graphics Card, Display port 1.1, current Graphics Driver 331.82.
According to Matrox Graphics my system as is can produce Max. Display Port output of 4096 x 1152 x 60 Hz Resolution Total.
( this is for TWO external Monitors, not including the Laptop screen. 17" ) ( not using 10" screen)
I have a ASUS VE278Q, Max. Res. 1920 x 1200 x 60 Hz.( working now with Main laptop screen, works well)
I intend to buy a ASUS PA279Q Professional 27” AH-IPS 16:9 2560 x 1440 WQHD Monitor.
( Yes, have DVI and Display Port on back of W700ds.)
Run Display Port 1.1 from computer to ASUS PA279Q Professional 27” AH-IPS 16:9 to achieve 2176 x 1152 x 60 Hz. resolution.
Daisy Chain Display Port 1.2 to ASUS VE278Q, to get Max. Res. 1920 x 1200 x 60 Hz.
Achieving three Monitors. Laptop screen for basic input. ASUS VE278Q, for tool bars for Autocad and ASUS PA279Q to draw AutoCad on.
Hopeing the ASUS PA279Q gives a very nice surface to draw on and see the fine lines well.
Do you agree with this plan and will it work?
Thank You
Solved!
Go to Solution.

the splitter requires the two monitor to have the same resolution. It essentially is making the two monitors as one larger monitor. So 2 x 1920 x 1200 becomes 3840 x 1200.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error

We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
"The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
Has any dealt with this issue successfully, or have any insight into the problem?

Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.

External Monitor for MacBook Pro 13"

Hello, I know there has been a number of threads on this topic, but I haven't found my answer yet.
I am looking for a third party external monitor for my 13" MacBook Pro. I read a lot of text on my computer so it is important that the text is sharp. I have tried a couple Samsung monitors so far and the text is far from sharp and in fact it is outright hard on the eyes.
Currently, I am using a 23" Samsung SyncMaster SA550 with a HDMI/MiniDisplay 6" cable, I am using it as the primary display with my laptop closed and the resolution is set to 1080p. It's almost as though the video card is not powerful enough to drive this monitor - is that possible?
I have two questions:
1) Is there anything I can do to get this monitor to display clearer text?
2) Can anyone recommend a monitor that would display clearer text?
Thanks! Any info would be appreciated!

The only reason I thought of suggesting 1920x1080 was becaue I looked up the specs on your 23" Samsung SyncMaster SA550 and see it only has vga and hdmi input. I suspect that because it's hdmi input the EDID info tells Displays to add 1080i and 1080p to the resolutions and suppresses the 1920x1080. It's why I wasn't sure it would be there in the first place.
So have you tried 1080i just to see what kind of results you get? And to cover all possibilities have you tried using the VGA connection?
It may just be that what you see on this particular monitor is as good as it gets.

Want to use a TV as a third monitor for Digital Cinema Display....HELP!

Hey Guys,
Here's my set up, please tell me where I am going wrong:
I have 2 22" LCD Monitors that I use for my main work. I added a second card to my MacPro so that I could add an additional monitor. Now I have a DVI to HDMI cable going to my Plasma that I want to use as playback for clients and such. Here's where it gets weird... In After Effects, I can use the Plasma in Digital Cinema Preview for Playback and Previews...works great. Then, when I open up Final Cut I have problems. First, when I go to "Digital Cinema Desktop - Full Screen" it display one frame and stay on that one frame even during playback. So then I changed my Sequence settings thinking my TV couldn't handle that Sequence. No I get a White Screen with no playback at all, not even the one frame. Now the weird part is that if I change the TV to my "Main Screen" in Monitor Prefs, and set Digital Cinema to "Main" it plays back fine. So, if I can playback with it as my main, why can't I playback otherwise? And...if it works in After Effects, why is Final Cut Having Problems with it? It's set to "All Frames" and "Desktop Mirroring". Thoughts? I have seen this set up work before...what am I doing wrong?

I'm trying to find out much the same thing. I would assume that anyone knows the answers can help both of us.
I'm purchasing a new Mac Pro desktop. I also use final cut but not after effects.
I actually have 4 monitors to choose from. 2 Dell 19" - One 27" Apple cinema display and a spector High Def 1080i monitor that has a DVI input.
I would like to use one of the Dell's as my primary home desk top monitors with folders and all the usual dock and stuff. I would like to use the cinema display as my primary final cut work surface.
I would like to use the HD monitor to show HD footage and use it as a client monitor. Remember it has a DVI input.
I've talked with the folks at the Local Apple store and they are not sure if I will get a real HD signal on the HD monitor if I add a second radeon 2700 card to the computer and take on of those DVI outputs and attach it to the HD monitor.
If thats not possible can I use the apple cinema display as my playback monitor?
Or do I have to go with a conversion box like a mxo, AJA board, or decklink box.
The goal is to have two monitors for the program and One monitor in HD for the client monitor,
Thanks everyone in advance.
Rich

Dual Displays Plus a Preview Monitor for FCP Supported?

Hello! I have the iMac 20" and do video editing. Beyond using a second display for an extended desktop, is it possible to have an additional monitor/TV for the preview while editing or for playback?
Thanks!
iMac (early 2006) Mac OS X (10.4.6) Also Running Windows XP Pro SP2

Here is my own answer, check out the Matrox MXO, it is a great add-on for the iMacs.

Is a ATI Radeon X1900XT (512 MB) card enough to drive a single monitor for video editing

My son just given an older mac pro.
2 x 3 GHZ Quad Intel Xeon.
OSX Lion
The video card installed is an ATI Radeon X1900XT (512 MB)
Is this video card sufficient to drive a single monitor for video editing and basic graphics work in PhotoShop, etc?
Many thanks.

nothing I guess
Just noticed that you can add emoticons to these posts.

Where can I download adobe postscript driver for autocad 2006 so I can print in .pdf?

Where can I download adobe postscript driver for autocad 2006 so I can print in .pdf?

Hi,
Adobe Postscript printer driver can be installed from Windows 7 for example as blow:
1. Select Start >Devices and Printers > Add Printers
2. Select "Add a local printer" and click "Next" button
3. Select "Use an existing local port: LPT 1(Printer port)" and click "Next" button
4. Select Xerox from Manufature section then select Xerox Phaser xxxxx PS printer
Hisami

Disable monitoring for non-system disks.

Hi all,
Our backup server dynamically mounts disks (with drive letters) when it's backing up a Virtual Machine.
These disks are giving a lot of alerts in our monitoring that we don't need, therefore we want to disable monitoring for these disks. What is the best way to disable monitoring for these non-system disks ? As I said, these disks are dynamically mounted and
unmounted ...
Any experience with this case ?
Kind Regards,
J. Monnens

This is a bit surprising, since the logical disk discovery only runs once a day, plus it's not supposed to discover network and removable drives.
That means that your disks are mounted when the discovery runs and that they appear as "real" logical disks...
Unfortunately there is no "sync time" parameter for this discovery, which would have allowed you to specify the time of the day at which the discovery runs; thus allowing you to set a time at which you know the drives are not mounted.
Is there any other parameter that could help identifying these specific disks, besides their letter, so you could add them to a dynamic group?
Otherwise, what you could maybe try is to create your own logical disk discovery based on the native one, but with specific settings that would exclude your drives and then disable the native discovery.
But this again implies that you have something that would let you identify specifically your mounted drives... Also the native discovery is a quite complex VBS, I wouldn't actually recommend disabling/modifiying it.
Maybe I could have another idea with more details about your environment...

Preview monitor for FCP

I have two 20" cinema displays powered by an ATI 1900 display card and would like to have a third monitor for preview. Can I put in another display card and route the realtime display to this card and monitor?
If this is possible what recommendation would you suggest
for a good single panel display card?
Mac Pro 2.66 Mac OS X (10.4.8)

You can add an ATI Radeon X1900 XT
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=22 0D662A&nplm=MA631Z%2FA>
or NVIDIA GeForce 7300 GT
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=20 858E48&nplm=MA567Z%2FA>
ATI Radeon X1900 XTs have to go in slot one or two (covering slot three as well).
NVIDIA GeForce 7300 GTs can go in any slot.
If you are going to use one 1900 and one 7300, put the 1900 in slot one, and the 7300 in slot four. Set the PCI-Express bus to x16 x1 x1 x8.
If you use two 1900s, set the PCI-Express to x8 x8 x1 x8.

Memory monitor for Project Raptor

I have earlier written a Memory monitor for JDeveloper 10.1.3 EA, where you can see the heap memory being consumed by the IDE.
This works for raptor too due to its JDeveloper base.
The extension was included in the JDeveloper Check for Updates.
You can use the same extension for Raptor also.
Option 1 : Use Check for updates by adding the following update center link:
Update Center : http://myjavaserver.com/~rajvissa/center.xml
Option 2: download the jar file and drop into ur < RAPTOR_HOME >/jdev/extensions folder
Link: http://jroller.com/resources/r/rajvissa/memory.monitor.10.1.3.jar
How it looks:
Memory monitor for Project Raptor : http://www.jroller.com/page/rajvissa?catname=/JDeveloper
Probably Raptor can add this to their update center like JDeveloper 10.1.3 EA.
I tried this and found that raptor's memory consumption is < 70MB most of the time (I am not a DBA)

Hi
I installed it with option 2: option 1 did not work. I am unsure if it's my issue or general.
Nice... I can control the amount of used memory!!
Thanks,
Andrea

IDOC monitor for shipping notification- EMASN

Hello experts,
Anybody know that is IDOC monitor for shipping notification-EMASN. what are the input we have to enter as defualt for this transaction.
can anybody help, very urgent.

I did not know about transaction VOFM (MAINTAIN Riquirements & Formulas), tab 'Data transfer' => 'Deliveries' .
Copy routine '301' to '931' and add thos line at the end:
likp-ntgew = xkomdlgn-ntgew_hdr.
likp-btgew = xkomdlgn-brgew_hdr.
likp-gewei = xkomdlgn-gewei_hdr.
likp-volum = xkomdlgn-volum_hdr.
likp-voleh = xkomdlgn-voleh_hdr.
Then go to VTLA ('Order to delivery copying control'), select your target (for instance 'EL' <= 'DL') and CtrlShiftF2 (Detail). Change the field Header data from '301' to our new '931'
Hope this is help someone one day,
Daniel
Edited by: Daniel Putzschler on Jan 20, 2011 2:17 PM

NW04s (BI) JAVA Add-in for ABAP fails at step CONFIGURE EP

Hi All
We recently upgraded our NW04 BI 3.5 to NW04s BI 7.0 AS ABAP. We are now in the process of installing AS JAVA and UT BI JAVA, EP. Our platform is Unix (AIX) and database Oracle.
JAVA add-in is failing at the step "Configure Enterprise Portal" with the error message:
Installation is being performed using sapinst from DVD/CD D51031797.
SAP Netweaver 2004s SR1-> Addtional Software Life Cycle tasks -> Java
Add-in for ABAP -> Oracle -> Central System -> Central Instance Java
add-in.
Error:
ERROR 2007-05-09 00:26:04
CJS-00320 Portal Deployment Monitor Error: The Portal Configuration
Upgrade report file
(/usr/sap/B82/DVEBMGS82/SDM/../j2ee/cluster/server0/cf_installation.report) does not exist.<br>SOLUTION: Contact your local support center.
Do someone know how to resolve this problem?
Shashi

thanks

Disabling time-only monitoring for a method

Hello,
I have a namespace "MyCompany" with a class "MyClass". MyClass has a method that is very CPU intensive (think loads of fast enumerations). I want to exclude this method from all monitoring including time monitoring.
Can I do this by disabling monitoring for that method in the methods dialog box (resource methods) or do I need to disable monitoring for the entire class under namespaces?
Thanks,
Peter

Hi Peter,
Both variants will work.
But if you choose the second variant (disabling the entire class within namespaces configuration), you won't see all the calls of that class in stack unless you add some calls explicitly within methods.
Igor Savchenko, VIAcode Consulting LLC (http://www.viacode.com/)

Reference monitor for digital cinema workflow

We use the Digital cinema workflow to create 2K title sequences for theatres. We plan to ad a 2K reference monitor into our workflow. The problem is that the video-out path for preview on reference monitors is not color-managed.
Is there a way to see a correct image on a referrence monitor in adjusting the monitor with LUTs?
Where can I find the needed LUTs?
Which monitor do You recommend?
I use After Effects CS3, Mac OSX 10.5.5, 2x2,8 Ghz Quad-Core Intel Xenon, 6GB RAM, Blackmagic HDExtreme2, Grafic card ATI Radeon HD 2600 XT

I'm trying to find out much the same thing. I would assume that anyone knows the answers can help both of us.
I'm purchasing a new Mac Pro desktop. I also use final cut but not after effects.
I actually have 4 monitors to choose from. 2 Dell 19" - One 27" Apple cinema display and a spector High Def 1080i monitor that has a DVI input.
I would like to use one of the Dell's as my primary home desk top monitors with folders and all the usual dock and stuff. I would like to use the cinema display as my primary final cut work surface.
I would like to use the HD monitor to show HD footage and use it as a client monitor. Remember it has a DVI input.
I've talked with the folks at the Local Apple store and they are not sure if I will get a real HD signal on the HD monitor if I add a second radeon 2700 card to the computer and take on of those DVI outputs and attach it to the HD monitor.
If thats not possible can I use the apple cinema display as my playback monitor?
Or do I have to go with a conversion box like a mxo, AJA board, or decklink box.
The goal is to have two monitors for the program and One monitor in HD for the client monitor,
Thanks everyone in advance.
Rich

New network (and much more) monitor for XFCE panel

A few years ago I wrote a tiny app to show a text network monitor in the XFCE panel, resembling the previous one I was familiarized with (in KDE?).
The past month I started fixing a bug and ended in a full rewrite, but keeping the original simplicity (at least in the panel bar) despite that now reports far more than the network activity.
The installation instructions are the same: download a single file (no dependencies), compile it, add a Generic Monitor Applet (XFCE) to the panel and configure it to load the new executable.
I have updated the wiki page, but the full instructions and code is now hosted at github: "Hacker's Monitor for XFCE". Yes, it has a new name also.
Here follows a screenshot with the mouse over the applet to open the tooltip (yes, I was intentionally doing a dd from /dev/sda into /dev/null ):
https://github.com/lightful/xfce-hkmon/ … /hkmon.png
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by cgarcia (2015-01-07 22:40:54)

Moving to Community Contributions...

W700ds add Monitor for AutoCad.

Similar Messages

Maybe you are looking for