Waaater damage??? HELPPPPP!!!

so my phone fell in the water yesterday, and I opended the phone really fast, dried the battery and put it back inside so it opened and worked fine but i could not touch, press or open anything. then I took the battery out again and put the phone in countainer of riice. i checked it maybe twice but then left it for one day. when i checked it the next day whichs today ,,it gaves me LED red flashing light with a black blank screen it does not open now any idea what to do next? any suggestions????
or at least at least, can i back up? get the informations our??? plzzz? i tried to connect it to the computer.. and desktop manager came on byitself but did not recgonize the phone. is there anything i can do???
I have blackberry storm 1 and a MAC laptop.
Please help, im desperate

Poly post...answered here:
http://supportforums.blackberry.com/t5/BlackBerry-Storm-BlackBerry-9500/water-damage-HELPPPPP/m-p/53...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Unable to load the project. latter is probably damaged or contain outdated elements

any one can help me with this probleme

Hi,
I am the one with the problem wich kaderdz exposed. Sorry for my English writing, my first language is French!
I still have the same problem and some of my projects won't open (months of work...).
The few projects that opens are kind of weird : only one chanel work in the audio, and the "title" window has also change. Here are some screen shots of what happens :
message 1:
message 2 - translation : impossible to charge the project. It is damage or contain obsolet elements :
message 3 :
title window :
I would be so grateful if you can solve the problem. It's a lot of work!!

When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

How do I backup to my external hd on 10.6.8 if the disk is damaged and can't be repaired?

Hi! So, I'll get straight to the point. I'm running 10.6.8 on my mac, which is about 5 years old. I attempted to install OSX Mavericks last night, so I could update some of my software. Anyways, the computer restarts and opens up the installer for OSX Mavericks, but after about a minute of installing, it shows that the Mavericks install failed. The upgrade couldn't be started because the disk Macintosh HD is damaged and can't be repaired.
Could someone tell me (step by step) how to back up all of my data, erase the disk, and install again? I have an external HD by the way.
Help would be much appreciated!

So, essentially you're saying that I need to download one of these programs to my external hd. But, how do I boot it from my mac if I can't get past the installation screen of Mavericks? I'm running on my other mac right now, if that helps. I've tried to use disk utility to repair, but it's greyed out. I honestly just want to retrieve all of my data, wipe the drive, and then install a new one. I just want to know how to do that.

I have an external drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. Which format do you think I should use? Will either one cause damage to the files on the hard drive?

I have an external hard drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. I also want to be able to connect it to my TV and watch movies.
I read up and I think I am supposed to use exFAT or FAT32? I also saw MS-DOS. Which format should I should use? Will any of them cause damage to the files on the hard drive?
My little memory stick uses MS-DOS and it works on both mac and windows.
Please can you just tell me a little about each and suggest which one to use.
I know how to change it once you tell me so don't waste your time writing about changing it.

Will any of them cause damage to the files on the hard drive?
WARNING: FORMATTING A DRIVE ERASES IT COMPLETELY !!
If you need to carry large files (e.g., larger than about 4GB) back and forth, you may need ExFAT. Otherwise MS-DOS works for smaller files.
The Mac can Read, but not write Windows New Technology File System (NTFS) without an add-on program such as Paragon NTFS.

I water damaged my iPhone and want to get my photos back. My iPhone was ios7 but my icloud synced to my work ipad on ios8. Is it now impossible to view any data from ios7 on icloud drive? Any help to get my photos back please!

I damaged my iphone 5s and want to get my photos back. It was submerged in water for a good five minutes (and is now in rice) but I'm pretty sure it's dead.
I really would like to get my photos back. I wasn't plugging in my iphone and backing up, I just assumed it did it automatically because about a week ago I had a message saying automatic backups were stopping as my icloud was full.
My work ipad is running on ios8 (as of a few days ago!) but my iphone was on ios7 as I didnt have enough space to install the update. This means that my icloud is now icloud drive and I cannot view the stuff from my ios7 device without upgrading it to ios8. Trouble is, I cant upgrade it because it's in a rice bowl.
Any help would be greatly appreciated! Any idea if I will be able to access my photos on icloud at all? I'm not very hopeful for my phone working again and downloading things that way!
Thanks!

Photos that are in the cloud stay there until they are removed by a device that has the right privileges. If your iPad is logged in with the same AppleID, then doesn't it show the photos from iCloud?
You will only be on iCloud Drive if you expressly chose to upgrade.

Windows 7 install on ssd with primary disk damaged

Hi everyone, to start sorry for my english, it's the best i can do...
I'm having a troubleduring the installation of windows with boot camp.
I have an imac 27 late 2009 with the 1 tb 3.5 internal disk that doesn't work. I have to replace it (using the apple free program of replacement) in a short time but for now apple have few disks so i have to wait to the replace.
To be able to use my imac i decided to remove the dvd super drive and put an ssd in it. I installed on the ssd lion without problems and it works well (os x recognize the damaged 3.5 disk and sees is as damaged and not working).
So i started to installa windows 7 using an usb key and the boot camp utility. I split the disk in 2 partitions, half for os x (60 gb) and half for windows. At the end the imac rebooted but instead to start the windows installation procedure there was an alternate image of the apple, of a folder with a question mark and a prohibition signal. So to see if the boot mode was right i shut down the mac, i removed the usb key and turned it on, it asks me to insert a boot device, so it tries correctly to start windows.
So i tried to do it again with a dvd external drive, same result. When the 1 internal tb hdd was working i did the same procedure and everything was working... Could it be the damaged disk the problem? Maybe windows tries to write something directly to the first disk and it fails? is there a way to completely disable by default the internal disk?

Did you look at the post just below this here?
http://discussions.apple.com/thread.jspa?threadID=2665592
While it has been done, there are always side effects and downside as well.
And you are up against the 4-partition limit of MBR.

How do i get my apps back if i just got a new one and the old one was damaged

i just got a new ipod. my old one got damaged and i dont know how to get my apps back

Downloading past purchases from the App Store, iBookstore, and iTunes Store

Put old I life on new computer now I photo dosn't work it says cant open because it may be damaged or incomplete so all my pictures can not be accesed how do I get back to I photo or take what I installed off with out losing all my pictures?

I got a new Mac and was trying to burn from I movie to get it to a disk but new I mac dose not have I DVD . So I had my old I Life 11 disc with I DVD on it and I installed it, when I did this it did something to my I photo I can not open it at all it has a message that reads ,you can't open the application IPhoto because it may be damaged or incomplete . Now I can not get or see any of my photos how do I reverse what I did? can I take that I Life back out and how? with out losing all my pictures? and how do you burn to DVDs now without IDVD?

Diane,
Your photos are in the iPhoto Library. Almost certainly that is intact, so don't worry.
Go to your Home folder and open the folder called Pictures. What you want is in there, iPhoto Library. Don't do anything there, this is just to reassure yourself.
So it is a matter of getting the iPhoto app to work. Apps are in the Applications folder. Find it and trash it.
Next download iPhoto:
https://itunes.apple.com/us/app/iphoto/id408981381?mt=12

Old hard drive damaged; how to upload from iPod to new computer

The hard drive on my old computer was damaged. I had not backed up all of my iTunes library to either a DVD or external drive. My iPod classic has about 6,300 songs. I just purchased a new computer. Is it possible to upload all of the songs on my iPod to the new iTunes library on the new computer? I assume I will get a message telling me that the computer is not authorized. I am not all that tech savvy, so I don't want to hit "sync" and lose all my non-Apple purchased music. Thanks.

Hey there again, here's another answer.
Be very careful when connecting an iPod full of music to an empty iTunes library.There is very real risk of permanently losing all the music.
To prevent auto sync, before you connect the iPod go to the iTunes preferences and select "devices", then select "disable automatic syncing for iPhones and iPods".
An alternative method is to connect the iPod whilst holding down the 'control+shift' keys and do not let them go until your iPod appears in iTunes.
If you see a message that your iPod is associated with a different library and asks if you want to link to a new one, make sure you press "Cancel".
If you should click on "Erase and Sync" will erase all the content currently on your iPod and it will be replaced with the content of the iTunes library you just connected to.
When you've pressed cancel your iPod should appear in the iTunes source list under "devices" and allow you to change the update setting to manage the iPod content manually, and that will let you use your iPod for the time being without the risk of accidentally erasing the contents.
Then do any of the following to transfer your music from iPod back to the computer/iTunes.
For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod or iPhone to a computer.
For all other non purchased content (your own CDs etc), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Other free programs are Pod Player, SharePod and Floola and iDump and iPodRobot.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
More information is contained here.
Copying content from your iPod to your computer - The Definitive Guide.

How do I backup the files on to my Macbook Pro 2010 from a damaged external hard drive?

Awhile ago my macbook pro crashed and I had to make a bootable disk of Mountain lion no problem here but I accidentallly deleted all the files off of my hard drive from which i recovered using a PC computer and disk drill. After it had recovered all my files i later tried to put these files on to my macbook computer and disk utility views the drive as damaged and needs to be repaired but in order to do this i have to format it and change the partition and what not. When i try to copy/burn to a CD the finder stops the operation and says that "finder cannot complete the operation because file _catalog cannot be moved" and just recently when i plugged my drive into my computer the sharing permissions say read only. I know that my files are there because when i right click and press get info i see that 5 gb are used but the folder is only showing me 2gb what do i do to get my files onto my computer?
My external hard drive is a WD 1 TB my passport and the partition thats givving my this trouble is formatted to be MS DOS FAT32
I have parallels Windows 8
I am running Mountain Lion on my Macbook Pro Mid 2010 model

Use Data Rescue on the Mac and out the recovered files to another external drive.
Just grab your users files, the rest you trash. That's all you can do.
Good Luck

I have a macbook air bought in 2010 wit liquid damage that might has affected the SSD card. I need to get my data but apple won't help. Authorized dealers never seem to have the same model to try whether the SSD card works. How can I get my data quickly?

Hi
I have a macbook air bought in 2010. It has liquid damage that might or might not affected the SSD card. I need the data on my SSD card for work and I need it urgently. Apparently Apple won't get the data out, even if I have apple care... Licensed apple dealers need to have the same macbook air model so they can insert the SSD card and check whether the data is there, and they never seem to have one...
I'm really disappointed with apple. It's been two weeks and I haven't been able to find out whether the SSD card is holding my data. It can't take that long to do it in store... How can they sell a product and then wash their hands on the matter?
Anyway, enough with the apple rant. I need to get this data urgently so I need to find out how I can get it out of the card. The SSD card and data might be fine so I don't want to take it to a data recovery centre and get charged loads.
Thanks for your help.
Olatz

See this link for a 4870 card, best instructs for flashing for a noob like me. (last lowest price was $150 for a 1GB vRAM 4870 from TigerDirect).
http://web.me.com/jacobcroft/4870Flash/4870Flash.html
However, not every 4870 card will work with the ROM currently floating around out there. BEWARE!
Link to recovering a bricked card:
http://forums.techpowerup.com/showthread.php?t=64328

An output module failed. The file may be damaged or corrupted.

Whenever I try to render something in After Effects CC 13.1.1, an error message pops up, saying "After Effects error: Rendering error while writing to file '[not going to disclose]' An output module failed. The file may be damaged or corrupted (-1610153464)."
Screenshot of the error message:
I tried reinstalling QuickTime (7), repaired it, updated After Effects to the latest version(as I am writing this), checked firewall software, and used other formats such as AVI.
Adobe Media Encoder (CC 2014-latest version) won't work with me, either.
I sent the composition to Adobe Media Encoder, and this is what I got, no progress here.
Screenshot:
It took a while to connect to the dynamic link server, and failed.
This is a log of what has happened in Adobe Media Encoder.
- Source File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\tmpAEtoAMEProject-Pink Intro1.aep
- Output File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\Pink Intro.mp4
- Preset Used: YouTube HD 720p 29.97
- Video: 1280x720 (1.0), 29.97 fps, Progressive
- Audio: AAC, 320 kbps, 48 kHz, Stereo
- Bitrate: VBR, 2 pass, Target 5.00 Mbps, Max 5.00 Mbps
- Encoding Time: 00:00:12
06/29/2014 02:29:14 PM : Encoding Failed
The Operation was interrupted by user
(no need to worry about the above part)
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
- Output File: C:\Users\Default.BronyGue\Videos\chilledup.wmv
- Preset Used: Custom
- Video: 1280x720 (1.0), 29.97 fps, Progressive
- Audio: Windows Media Audio 10 Professional, 96000 Hz, Stereo, 24 bit
- Bitrate: CBR, 2 pass, Max 10000.00 kbps
- Encoding Time: 00:01:42
11/22/2014 12:24:39 AM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
- Output File: C:\Users\Default.BronyGue\Videos\chilledup.mpg
- Preset Used: Custom
- Video: 1280x720, 29.97 fps, Progressive, Quality 75
- Audio: MPEG Audio, 384 kbps, 48 kHz, Stereo, 16 bit
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 Mbps
- Encoding Time: 00:00:11
11/22/2014 12:52:11 AM : Encoding Failed
The Operation was interrupted by user
- Encoding Time: 00:00:51
11/22/2014 12:53:51 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Encoding Time: 00:00:46
11/22/2014 08:39:46 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage4.aep
- Output File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\montage.mpg
- Preset Used: Match Source - High bitrate
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:00:00
11/22/2014 10:06:45 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
I need some help! Any solutions?.
Computer Specs:
AMD FX-6300
8GB 1600MHz DDR3 RAM
NVIDIA GeForce GTX 650 Ti BOOST
1TB 7200RPM Hard Drive
Windows 8.1 Update 1(with latest updates)
EDIT(11/23/2014 8:31PM PST): For some reason, other projects work for me just fine. I am not sure why it is not working on one project.
Screenshot of a new project other than this I am rendering at the time of writing this edit:

Can other projects can output to the same output location? Yes
Can other projects render with the same render settings (codec, format, etc.)? Yes.
If you create a new composition and just add a solid layer to it with no effects in the same project does it render? No. I still get the error.
Can you render that brand new comp with the same render settings, output settings, output location etc.? Yes.
If so, what effects are present in the offending comp? Twixtor Pro in all the cinematics/clips, Motion Tile and Transform for pan/crop & wiggle, Magic Bullet Looks and Bad TV Warping preset with just Wave Warp & Venetian Blinds for color correction, Gradient Ramp for text, Bad TV Warping preset with everything for effect, Transform for fade in/out, and ReelSmart Motion Blur v4.1.2 for motion blur.
Also, what scripts are you using? Just the Move Anchor Point script I found from one of Mt. Mograph's videos, Summit 16 - 2.5D Minecraft Steve - After Effects - YouTube.
Have you ever installed any third-party codec packs? (I've heard of some codec packs causing weird issues like this.) Yes, (not everything I have, just everything I can think of and find) I have K-Lite codec pack, Fraps, x264vfw, and Xvid MPEG-4 codec.

CS2 Database file - Damaged Error, program shuts down

32mb InDesign file with 50 pages of text and hi-res color images. Just after saving and trying to scroll to another page, images were grayed out and an error message came up stating the database was damaged and InDesign was shutting down.
Reopened InDesign and same error. Restarted the Mac, opened the file and the program rebuilt the file, seems to be OK. I have 3.5mb of memory with InDesign, Photoshop, Illustrator, Word, Excel, Acrobat and Safari all open. MAC OS 10.4.11
Any clues on what might be causing this problem??

This is the window I received.
edit* looks like pics don't work here
What is it supposed to do and how do I un-install it.....have removed all traces of JAVA & downloaded fresh, still nothing
Any ideas?
Message was edited by:
RichardJW1

The file is damaged and it can not be repaired (PDF Printing in Z-program)

I am opening this thread on behalf of my colleague Merja regarding a problem while trying to print using the Integrated ITS 6.40.
The problem happens when using webgui directly. Support Package level is 21 and kernel 640 patch 196. Note 771683 regarding printer with access
method 'F' and device type 'PDF1' is already in place. 'Output immediately' opens the preview. Error still exists when using "print preview" button.
The issue occurs when trying to review the Employment Contract within the portal UI. The actual print is finished correctly but the "Print Review" function returns HTTP 500 error, "The file is damaged and it can not be repaired".
When we perform the same activity in system R/3 within the transaction SE38, with our Z-program everything works correctly and no problems occur.
Could you please help solving this issue?
Thanks and regards,
Merja

Not sure if the flollowing will be of use, but worth a try?…
Try changing the .ai to .eps or .pdf to see if anything happens to see if it makes a difference to importing or exporting as a pdf?
If you have Indesign, try importing the file into Indesign then saving that file as a pdf or/and export as a Indesign eps file.
Sorry I cannot be of any more assistance.
Good luck!

Waaater damage??? HELPPPPP!!!

Similar Messages

Maybe you are looking for