WAAS 3.5, unable to login to administrator page.

Hello All
We recently installed WAAS Mobile Server 3.5,the installation was sucessful, all the pre requisite was fulfilled for the installation
But we are unable to log in to the administration page, keep getting the erro invalid username and password.I did some check on the IIS but no results, would appreciate any assistance on this.
Thank you,
Subu

Hi
After you install the WAAS Mobile Server, you should be able to open the WAAS Mobile Manager Login page and login using the default usernames and password. The default username is admin and password is default
This is described in the WAAS Mobile Server installation guide on Page number 19 in the link below:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas_mobile/v3.5/configuration/administration/guide/CiscoWAASMobileAdminGuide_3_5.pdf
Regards
Rama

Similar Messages

Unable to login as administrator after creating new standard account

Just got a nice new MBP form work today.
When logged in as the admin I created a new standard account for my personal use. I then shut down the laptop.
After booting up I am presented with a default icon, my standard use name, and a field to enter my password. I can login to this account fine. If I click on the arrow next to the username (this seems pretty poor UX - it annoyingly takes a while to appear, and how is a new user supposed to know what it is for? /vent), and then click on 'other' and enter my admin username and password, it is not accepted and the password field just shakes.
Am I missing something obvious?
Many thanks.

@Frank Caggianoy
Yep, the Display login window is set to List of users. The password that has been set up is the passwsord I've been using for several months at work, so that cannot be the issue.
@nbar
When I set up the standard user account, there was definately an administrator account in the user list. I also installed some work related applications which are not present when logged in to the standard account.
I've got to say that these forums are very helpful - thanks for the suggestions. I'll speak to the person who set up everything tomorrow, and post back what the problem/solution was.
Cheers.

Unable to login to Administration Console

Hi,
I am evaluating WL 6.0.
I am trying to login into the Administration server using the Administration Console, which prompts for the username and password.
The documentation said:
The first time the Administration Console is started, you can use the user name and password under which the Administration Server was started
what user name and password is the documentation talking about?
Thanks,
Hien

sorry, I just figured it out. The user name is 'system'.
"Hien Luu" <[email protected]> wrote:
>
Hi,
I am evaluating WL 6.0.
I am trying to login into the Administration server using the Administration Console, which prompts for the username and password.
The documentation said:
The first time the Administration Console is started, you can use the user name and password under which the Administration Server was started
what user name and password is the documentation talking about?
Thanks,
Hien

Unable to login to Administration Tool

Hi,
i've following problem.
I'm trying to open rpd in Online Mode using Administration Tool on Oracle Business Intelligence Suite 11g. But when i insert user e password i receive following error:
"Logon Failed".
I've investigated on error cause and opening Administration Tool log file i find following error traced:
[nQSError: 61013] File error: path=C:\app\oracle\product\ofm\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1\repository\OBI11_merged_BI0020.rpd, code=32: There has been a sharing violation.
Repository password is correct because i'm able to open rpd in Offline Mode using it
In addition i'm able to login in Analytics and Enterprise Manager environment with weblogic username and password. I insert the same credentials when i open rpd in Online Mode
How can i resolve the problem? Thanks

Hi,
This is interesting!! After running through the thread, I suspect there is some issue with your configuration not the .rpd. Taking your words that replacing your old .rpd does not work too and of course the your old .rpd would have worked, here are my prime suspects
1. Some clustering setup running behind scenes. I not get any other instance, when a .rpd could be shared except when a master .rpd is shared with cluster servers. So is the "Sharing violation" error.
2. Some Init blocks in your .rpd with "Required for Authentication" set. For example, an init block with "required for authentication" is bound to fail and not let you in online mode, when the underlying source/ DSN etc has issues.
So, check on these guys and see if you nail them down first.
Hope this helps.
Dhar

Unable to login to facebool page. Why ?

I am unable to log into my Facebook page no matter what I do. If you can help thanks, if not then Facebook is like the other pages that don't work. You ask for help and they tell you a bunch of junk and it still don't work.

this is the screenshot

Unable to login into R12 Page.

Here is the error message from oacore. Please help. java.lang.VerifyError: JVMVRFY012 stack shape inconsistent; class=oracle/jdbc/driver/OracleDriver, method=()V, pc=48 at java.lang.J9VMInternals.verifyImpl(Native Method) at java.lang.J9VMInternals.verify(J9VMInternals.java:72) at java.lang.J9VMInternals.initialize(J9VMInternals.java:134) at java.lang.Class.forNameImpl(Native Method) at java.lang.Class.forName(Class.java:169) at oracle.jbo.common.java2.JDK2ClassLoader.loadClassForName(JDK2ClassLoader.java:38) at oracle.jbo.common.JBOClass.forName(JBOClass.java:164)

Please post the details of the application release, database version and OS.
Was this working before? If yes, any changes been done recently?
Can you find more details about the error in the application and the database log files?
Does AutoConfig complete successfully with no errors?
Thanks,
Hussein

Unable to Login into APEX after upgrade from ORACLE XE to APEX 3.2

Hi,
I have upgraded Oracle 10g XE to with apex_3.2 on the Windows XP.
My ORACLE XE wa in folder "C:\ORACLE XE"
And APEX 3.2 in folder "C:\Ver 3.2\APEX"
Once you complete the standard install, i performd the following steps to complete
the upgrade which i got on my previous post.
Till normal installation i was able to login in Apex link and was able to run my application which was
in oracle XE but the only problem was i was unable to see any images in "EDIT PAGE" but my application was running well.
then i did following steps to get those images
Connect to SQL*Plus as SYS
@APEX_HOME/apex/apxldimg.sql APEX_HOME
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
I chanbged image directory as below
FROM:
create directory APEX_IMAGES as ‘&1/apex/images’ ;
TO:
create directory APEX_IMAGES as ‘c:\oraclexe\apex\images’ and also tried ‘c:\ver 3.2\apex\images’;
Ran @apxldimg.sql
@apxxepwd.sql password (where password is the password of the Application Express internal ADMIN account)
Exit from the SQL*Plus session.
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
But now i am unable to login into the page itself. It "showing Page Not Found"
Please kindly help me how to run APEX now through link.
Thanks in advance.
Thanks & Regards
Sanjay
Edited by: user11204334 on Aug 11, 2009 2:05 AM
Edited by: user11204334 on Aug 11, 2009 4:30 AM

Hi John,
Thanks for reply
I got error while doing following steps in few procedures
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
Before doing the above step i was able to login into my application but without images
Can you please help that how to check those errors and any particular procedure you know which is responsible for the Login problem.
Thanks a Lot for help John
Thanks & Regards
Sanjay

Unable to enter administration page of NSS 326

Even after a soft reset, we are unable to enter the administration page of our NSS 326, and even through the NSS Discovery tool, we can't configure as it asks the admin username and password ( the default is expected to be admin-admin after the soft reset but doesn't work). Any help would be useful. Thank you in advance.

That may be because the clock settings on your computer are not the same as the clock in general, or perhaps because the clock on your computer is dead..
to deal with you can reset your clock on your computer or sertivikat looking at options on the right side and then choose to agree if it has been found..

How to configure Manage Access in Administration page?

I installed Adobe Reader Extension and is able to login into Administration page. Can any one teach me how to configure the Manage Acess - especially on LDAP Server portion?
I tried to put local server name in LDAP server then press Apply. Error pop-out:
Validation Error
You must correct the following error(s) before proceeding:
Internal Error : Error 2505: A problem occured while creating a controller -- Cause: com.adobe.server.AuthenticateException: The LDAP host cannot be contacted, please check your settings.
Can any one help me on this?
Thank you.
Wong

you should add
PlsqlNetServiceNameFormat=cn=asdb,cn=oraclecontext NetServiceNameFormat
in your dtds.conf
and you also need modify your ldap.ora fiile which stored in your portal/infra server directory. the directory maybe looks like .../ldap/admin/ldap.ora

Unable to Login in Portal as Administrator or any other User

When I try to login as Administrator in portal.. It do not display any error message but at top it still displays as GUEST only.. when i checked in I have cheked in log file PTMAchine.log it shows as 6/7/04 13:47:29- Connected as user 'Administrator' But doesnt display appropriate message on screen.
I have checked in database that the User Administrator exits... Table Name - PTUSERS LoginName - Administrator Password - Enrypted Thanks

Kalimuthu V wrote:
Vimal,
Are you getting any error stack or any particular error message other than what you mentioned?
Btw, if it is after some change or something better you raise an SR with Oracle support to get this fixed.
Thanks.
With Regards,
Kali.
OSSi.hi kali
No i didnt not get any error stack, page with above error only.
Actually i was trying to use digitle signature based approval for workflow notification and it got errored out. i closed the window and try to login with sysadmin user it got above message, I tried after sometime n now i am able to login. I could not understand the behaviour.
Regards

Unable to login to apex as admin after apparent successful installation

I am unable to login to apex as admin after an apparent successful installation.
I have an existing Oracle database 11.2.0.1.0 with Oracle Text running on Windows 7 Professional with hundreds of gigabytes of free disk space available. I did everything as an operating system user with administrator privileges. I downloaded the latest version of apex 4.0.2 for all languages, unzipped the downloaded zip file, extracting all files to an apex directory. I changed the working directory to apex and started sql*plus, connected sys as sysdba, ran apexins.sql installation, apex_epg_config.sql and apexconf.sql configuration, apexchpwd.sql to change the admin password, and apxldimg.sql to copy the images, and exec dbms_xdb.sethttpport(8080), unlocked accounts, and granted connect privileges.
The installation log did not show any errors and included:
"Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the APEX_040000 schema.
The structure of the link to the Application Express administration services is as follows:
http://host:port/pls/apex/apex_admin (Oracle HTTP Server with mod_plsql)
http://host:port/apex/apex_admin (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
The structure of the link to the Application Express development interface is as follows:
http://host:port/pls/apex (Oracle HTTP Server with mod_plsql)
http://host:port/apex (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
JOB_QUEUE_PROCESSES: 1000"
When I use either browser, Firefox 3.6.12 or Internet Explorer 8.0, and go to http://localhost:8080/apex/apex_admin I get a screen that says:
"Enter Application Express internal administration credentials"
and has boxes for a username and password. When I enter admin and the admin_password that I selected, then click on login nothing happens. I don't get logged in. I don't get an error message. It does not show any signs of anything running. It just sits there. I also don't get any messages from Windows or Norton 360 indicating that a pop-up window was blocked or any such thing. I checked that the services are running and also tried shutting down the computer and re-starting (cold boot), but was still unable to login.
I am a retired developer, not a DBA, so if there is anything else that I should do or check or provide, then please let me know. I have provided a copy and paste of everything that I could think of below. Oddly I don't see an admin user.
SQL> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> select status from dba_registry where comp_id = 'APEX'
2 /
STATUS
VALID
SQL> select username, account_status
2 from   dba_users
3 where username = 'ANONYMOUS'
4 or     username like 'APEX%'
5 or     upper (username) = 'ADMIN'
6 order by username
7 /
USERNAME                       ACCOUNT_STATUS
ANONYMOUS                      EXPIRED
APEX_030200                    EXPIRED
APEX_040000                    OPEN
APEX_PUBLIC_USER               OPEN
SQL> select dbms_xdb.gethttpport from dual
2 /
GETHTTPPORT
       8080
SQL> select owa_util.get_version from dual
2 /
GET_VERSION
10.1.2.0.8
SQL> show parameter memory_target
NAME                                 TYPE        VALUE
memory_target                        big integer 1536M
SQL>

Are you sure you did give right path to script ? Yes.
>
If you extract files to folder c:\temp, you have after that folder c:\temp\apex and bunch of sub folders.
For script to update images, you give path to folder where you did extract apex install files.
In above case that is then c:\temp .
>I created a directory c:\apex on my laptop. I downloaded the zip file to that directory. When I extracted the files to folder c:\apex, the result was c:\apex\apex with a bunch of sub folders and files. When I ran the script, I gave the path c:\apex as indicated in my copy and paste. So, I did everything the same as in the quote above, except that I used apex instead of temp.
Try extract Apex install zip to c:\temp and give c:\temp as path for scriptAre you suggesting that I redo the entire installation using c:\temp instead of c:\apex? What difference would that make? Would I need to do some sort of uninstall first?

After configuring DMZ unable Supplier login to Sourcing modules

After configuring DMZ unable Supplier login to Sourcing modules
You have encountered an unexpected error. Please contact the System Administrator for assistance.
Regards,
Amit Chowrasia

mikey.askdbaonline wrote:
Anybody face this issue earlier we are also getting error
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: SSL call to NZ function nzos_Handshake failed with error 29014 (server test.com:4443, client 192.168.1.22)
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: SSL call to NZ function nzos_Handshake failed with error 29014 (server test.com:4443, client 192.168.1.22)
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
Regards,
Amit ChowrasiaWhat is your application release? What version of JRE you are running?
Is SSL enabled?
Is the issue with one module only?
What document did you follow to implement DMZ?
Can you find any errors in access_log file (assuming the above from error_log file)?
Can you find any errors in the application.log file and/or in the database log file?
Thanks,
Hussein

Unable to login to update the photoshop or the illustrator through the Creative cloud dock in Mac

I am unable to login in the Creative cloud dock in Mac but am able to login in their website with the same ID and password. Everytime i try to update, it asks for authentication but is not accepting the details.
I tried to contact support through chat, but they never seem to be available.

Sunilbabuvk I believe you are being prompted to enter your administrator password. You can find details regarding the installation process at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html. If it is asking for your administrator credentials then you will want to enter the same information you use to log into your computer.

Unable to login from laptop but can share screen

Hi
Weird problem
OSX 10.6.3 Server
I am Unable to login as a user from my laptop but as the user can share the screen from within finder.
2 users are setup the same one can login"connect as" but not share the screen
the other can share the screen but not login"connect as" from finder giving an "invalid user ID or Password yet both are the same for each login be it screen or share"connect as" & both have Administrator rights.
I have deleted & redone the users three times.
Can login as Admin for both from either laptop
Lost & looking for advise

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39]

HANA Admin tool error - unable to login

Hello HANA Developer / admin gurus!
I am unable to login to XS Administration Tool (DB version rev.74).
Using Chrome's Developer tool following error was captured:
http://<hostname>/sap/hana/xs/formLogin/login.xscfunc 500 (Internal Server Error)
Apart from this very generic error, I am unable to find any other traces / error logs.
My user-id has all relevant (and probably more!) xs roles; still unable to find the root cause.
Any help is highly appreciated.
Thanks in advance,
Shaji

To whoever is interested, this issue is now resolved.
Resolution details in document HANA XS Engine Logon Error - with Resolution.
Hope you find this useful.
Best regards,
Shaji

WAAS 3.5, unable to login to administrator page.

Similar Messages

Maybe you are looking for