WAAS 4.1.15b and two windows domain
Hi
I have two data centers and two windows domains (lets call them X and Y)- in data center X I have to WAE - CM and Core, in date center Y I have one configured as Edge and Core as well (peple in data senter Y have to access to resources in doman X).
In all remote offices are WAEs configured as Edge. Ale WAE are added to domain X.
All prepositions in domain X works fine.
I have created secound CoreCluster for domain Y, added WAE in date center Y as Core and one WAE in remote office as Edge to this CoreCluster, but preposition doesn't work.
On Edge WAE In logs /local1/logs/actona/RxLogging.log i can find only this:
[2010-03-25 14:35:58,765][ INFO] - Preposition ID 929205 started on \\serverY\testfolder\.
[2010-03-25 14:39:59,303][ INFO] - Prpositioned files under \\serverY\testfolder\ (task 929205): File server disconnection - scanned 0 files, up
dated 0 files, 0 bytes 0 directories.
[2010-03-25 14:39:59,323][ INFO] - Preposition ID 929205 failed, reason: Completed with error(0 files with errors).
I can ping this serverY from this WAE.
The question is:
Is it possible to create preposition for two windows using this infrastructure ?
ps. I have to use lagacy services.
I hope that this is not so complicated
Thanks in advance
james
James,
Thanks for the log files. In the Tx.internal.log file, there is the following entry:
2010-04-15 12:08:28,952 WARN (actona.cifs.fsclient.FileSystemClient:1799) TP-1 - Terminating caller due to disconnect: error=13caller=TYPE_START_SESSION [cookie=null]
This message and error code means that the WAFS Core was unable to open a socket to the origin file server you are trying to preposition content from. Can you please verify the following from the CLI of the WAAS device running the WAFS Core service:
Verify name resolution - dns xchn.i.shadm
Verify IP connectivity - ping xchn.i.shadm
Verify TCP connectivity - telnet xchn.i.shadm 445
Thanks,
Zach
Similar Messages
-
The ACS server can be configured to work with two windows domains? to authenticate users that belong to the domain called "a" and "b", the protocol to authentificate it is 802.1X in a Wireless Enviroments (WLC4400+ACS4.2+Two Windows Domain).
Hello,
Under certain conditions, yes. You have to have trust between the domains, and depending on whether you are running the ACS on an appliance or a server, there's certain configurations you have to do to make it work with multi-domain authentication.
Here are a few links to get you started:
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/new_feats.html#wp1011301
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UsrDb.html#wp353805
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/windows/postin.html#wp1041202
HTH,
Faisal
If you find this post helpful, please rate so others can find the answer easily -
Dear Microsoft Support,
As mentioned in the title,
I have two domains. One is Domain A at HQ. The other one is Domain A at branch office. A laptop having Win 7 Pro OS is a client of Domain A. The Domain A has Exchange Server 2003. Users of Domain B get connected to Exchange Server for email services. In
all clients of the Domain B, IP address of the email server added in C:\Windows\System 32\drivers\etc\host file.
Whereas in the clients of Domain A it was not done, because all the servers including the email server belong to the Domain A.
Now, a user with Domain A's client (it is a laptop) came to Branch office and wanted to access the Outlook (using Outlook Web Access). since there is no IP address added in the Host file of the laptop, connectivity to email is not possible. When I try to
add the IP address, I was not able to do so due to Domain A's security reasons.
So, let me know, is there a way out to add the IP address in the host file of the Domain A's client.
Thanks in advance.
Ravi Sekhar ModukuruI would suggest adding the mailserver address in Domain B's DNS. Would that be possible?
I agree. The correct solution in this case (since it appears you already have a two-way Domain Trust in place) is to properly configure DNS in Domain 'B' to be a secondary of Domain 'A' and completely eliminate the need to maintain the HOSTS file.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
with CC can i still use all the machines or do i have to take out an individual license for each?
Your LR5 license allows for activated installations on two machines. Of those two machine, only one can be using the licensed software at a given time. The same applies with CC, except with CC you won't be able to sneak in the third machine. What you can do though with CC is have it installed on all three and sign in and out of the different machines as needed.
If you intend to be using all three machines at the same time then you do need three separate licenses/subscriptions to be in compliance with the license agreement. -
Hi All,
In my environment there are two Windows Domain - Doamin A and B. ACS is configured on member server in domain B and hence Windows Authentication for users in Domain B is working fine. However I'm unable to see domain A in Configure Domain List on ACS server in Windows Domain configuration menu.
Please note, there is one way trust between domain A and B with Domain A trusting Domain B.
Is there a way I can use the same instance of ACS to authenticate the users in Domain A as well? If YES, can you please guide me with some pointers - thanks.
I'm using ACS and Windows AD elements to authenticate users for SSL Web VPN on ASA 5540.
Apprecaite quick help on this.
-SatishcpUnfortunatley we are not using the Cisco Secure ACS Appliances, rather its ACS Ver 3.3 running on Windows 2000 Server (member server in Domain B).
My guess Remote Agents for Windows / Solaris works with Appliances alone. -
I have one FF (36.0) installation and two Windows user accounts: one for work (w/o internet access but with access to domain resources like JIRA) and one for internet access (w/o access to local resources). I need two instances of FF running at the same time with different resources.
I've created profiles with different names under both accounts and specify profile names using -p parameter. However when I try to start both instances of FF (second one is started via RUNAS), second instance can't be started, new tab in already running instance is opened instead:
firefox.exe -p profile
runas.exe /profile /savecred /user:user_i "\"firefox.exe\" -p profile_i"
When I start one of them with -no-profile, I can start both at once... but when I try to execute firefox.exe with an URL in order to open a tab with this URL in one of running instances (local URLs I open by starting firefox.exe under work account and remote URLs I open by starting FF via RUNAS), it can't sent URL to already running instance of same user, it always sends URLs to an instance that is runnung w/o -no-remote.
firefox.exe -p profile -url "url"
runas.exe /profile /savecred /user:user_i "\"firefox.exe\" -p profile_i -url \"url\""
So, I need to have two instances under two different Windows user accounts, and when firefox.exe is started again, it should only communicate with instance that is running under same user account, it must not communicate with instance that is running under different Windows account.''guigs2 [[#answer-699118|said]]''
<blockquote>
https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options#-no-remote
This feature was removed and unfortunately I do not have any ETA or work around for this.
</blockquote>
It was the different '''-remote''' switch that was removed and not the '''-no-remote'''
https://www.mozilla.org/en-US/firefox/36.0/releasenotes/ -
Hi! I have a new MacBook Pro, but I haven't been able to put iTunes on it even though I have used it for years on my iPhone, iPad, and two Windows desktops and two Windows laptops. I keep getting the message that "I am exceeding my iTunes account limit of 5 computers (not counting my iPhone and iPad, which are explicitly excluded from the count according to the message)". As anyone can see, I only have 4 computers, so I should not have any problems with installing iTunes, but this same message says that I need to deauthorize at least one computer or maybe I have extra authorizations on a computer.
I can't even find a list or map of the computers on my iTunes account! Please, somebody help ASAP!!!!! Thanks!!!!!
Murray in Atlanta
**** cell
Message was edited by: lmfj20001
<Personal Information Edited By Host>Deauthorize all of your computers and authorize the computers you use.
http://support.apple.com/en-us/HT6283
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Best. -
Issues with JMS messaging between two Glassfish Domains
All -
I have a stand alone client and two Glassfish Domains - each of which has a message bean on it. I have successfully sent messages from the client to each message bean, however, I then want the message beans to be able to send messages back and forth from one another. This is where I run into a problem. For some reason, I am getting errors when trying to send a message from one message bean on Domain1 to another message bean on Domain2. Is this possible to do? Can someone help out with the exception that I am getting below?
Thanks in advance....
package mdbs;
import java.util.Hashtable;
import java.util.Iterator;
import java.util.Map;
import java.util.Set;
import javax.jms.Connection;
import javax.jms.ConnectionFactory;
import javax.jms.JMSException;
import javax.jms.MapMessage;
import javax.jms.MessageProducer;
import javax.jms.Queue;
import javax.jms.Session;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
* @author frostry
public class SendMessage {
Context ctx;
Boolean sendMessage(String connFactory, String destResource, String providerURL, Map message) {
Connection connection = null;
Session session = null;
try{
context(providerURL);
ConnectionFactory connectionFactory = (ConnectionFactory) lookup("jms/tankConnectionFactory"); // connFactory
Queue queue = (Queue) lookup(jms/tankQueue); // destResource
System.out.println("QueueName = "+queue.getQueueName());
connection = connectionFactory.createConnection();
session = connection.createSession(false,Session.AUTO_ACKNOWLEDGE);
MessageProducer messageProducer = session.createProducer(queue);
MapMessage mapMsg = session.createMapMessage();
//TextMessage message = session.createTextMessage("It is a message from main class "+ ": "+ i);
Set keys = message.keySet();
Iterator i = keys.iterator();
while (i.hasNext()) {
String key = (String) i.next();
String val = (String) message.get(key);
mapMsg.setString(key, val);
System.out.println( "Message Is:"+ mapMsg.toString());
messageProducer.send(mapMsg);
} catch(JMSException e) {
e.printStackTrace();
} catch(Exception ex){
ex.printStackTrace();
return true;
public void context(String providerURL) {
Hashtable properties = new Hashtable(2);
properties.put(Context.PROVIDER_URL,"iiop://127.0.0.1:1481"); // providerURL
properties.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.appserv.naming.S1ASCtxFactory");
try {
ctx = new InitialContext(properties);
} catch (NamingException ex) {
ex.printStackTrace();
public Object lookup(String name){
try {
System.out.println("About to lookup dest resource = "+name);
return ctx.lookup(name);
} catch (NamingException ex) {
ex.printStackTrace();
} catch (Exception e) {
e.printStackTrace();
return null;
from domain.xml on Domain2 - the IIOP port is 1481:
<iiop-service client-authentication-required="false">
<orb max-connections="1024" message-fragment-size="1024" use-thread-pool-ids="thread-pool-1"/>
<iiop-listener address="0.0.0.0" enabled="true" id="orb-listener-1" port="1481" security-enabled="false"/>
The output I get is:
A Message received by TankBean: MessageTitle = start
list[i] ==> 127.0.0.1:1481
corbaloc url ==> iiop:[email protected]:1481
QueueName = PhysicalQueue
java.lang.NullPointerException
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:248)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:176)
at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:337)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:189)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:165)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:158)
at com.sun.messaging.jms.ra.DirectConnectionFactory._allocateConnection(DirectConnectionFactory.java:569)
at com.sun.messaging.jms.ra.DirectConnectionFactory.createConnection(DirectConnectionFactory.java:262)
at com.sun.messaging.jms.ra.DirectConnectionFactory.createConnection(DirectConnectionFactory.java:241)
at mdbs.SendMessage.sendMessage(SendMessage.java:43)
at mdbs.TankBean.FireMissile(TankBean.java:138)
at mdbs.TankBean.startTank(TankBean.java:88)
at mdbs.TankBean.onMessage(TankBean.java:58)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.enterprise.security.application.EJBSecurityManager.runMethod(EJBSecurityManager.java:1011)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:175)
at com.sun.ejb.containers.BaseContainer.invokeTargetBeanMethod(BaseContainer.java:2920)
at com.sun.ejb.containers.BaseContainer.intercept(BaseContainer.java:4011)
at com.sun.ejb.containers.MessageBeanContainer.deliverMessage(MessageBeanContainer.java:1111)
at com.sun.ejb.containers.MessageBeanListenerImpl.deliverMessage(MessageBeanListenerImpl.java:74)
at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:179)
at $Proxy124.onMessage(Unknown Source)
at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:258)
at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:76)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:555)I don't have any ground-breaking news for you, just wanted to say that you're correct - you sure can send messages from one server instance to another.
I've never worked with GlassFish, but JMS is JMS and exchanging messages in the way you described should work just fine.
Let me just make sure about the obvious:
Example: instance A, port 1099, queue qA; instance B, port 2000, queue qB
To send message from A to B you create InitialContext for server B (port 2000), lookup queue qB and put a message on it.
To send message from B to A you create InitialContext for server A (port 1099), lookup queue qA and put a message on it.
I'm sure you're doing this, though.
You can use this code to print the content of JNDI tree:
public void printList(NamingEnumeration<NameClassPair> list) {
NameClassPair entry;
System.out.println("JNDI tree:");
while (list.hasMoreElements()) {
entry = list.nextElement();
System.out.println("name=", entry.getName(), ", class=", entry
.getClassName());
You call it like this: printList(initiaiContext.lookup("/"));
You can replace "/" with the path you want to list. In your case "/jms" could be more useful.
With this method you can see if all your objects (connection factories, queues, whatnot) are bound where they should be.
If all is there things should work - just keep digging.
HTH,
Mark -
ISE and Two distinct Windows Domains
All,
I have a customer who wants to integrate ISE with two seperate Windows Domains, they have no trust releationship. We can integrate with one of the domains and can make use of LDAP for the other but can only get Machine Authentication working with the domain with the full integration. Machine authentication will not work with LDAP, only user authentication. The problem is the config of the switches places the client in the guest network as they fail machine auth and then client auth is not recognised by the switch. I'm thinking about either not going direct to MAB if a user fails machine auth or diabling guest all together as the porblem is a guest with a dot1x suplication is not given guest access in a timely mannor without this command. Another option I have thought about is to use the radius token external identity store to talk to a Cisco ACS server attached to the other domain.
Any help would be greatly appreciated
Thanks
SimonHere's the list of which methods are supported when using different kinds of user databases :
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_id_stores.html#wp1053140 -
Can I configure two webserver domain in one windows server
Can I configure two webserver domain in one windows server with default port. ( i.e 80 )
For Ex:- http://server-name/psp/DOMAIN/?cmd=login and another one
http://server-name/psp/DOMAIN2/?cmd=login.
If not please let me know the workaround to do so. B'coz i don't want to put portnumber in my second URL..Hi,
You can even have serveral domains within the same webserver instance.
During PIA installation (of the second) choose option existing domain and then add an additional site.
Give the domain a unique name and port to your second application server and you are ready to go.
I usually do this on sandbox environments to keep the sandbox small , with several databases (Portal, HCM, FIN, CRM) and one PIA with serveral domain.
But is definitely not what you should do for production systems.
Each application should have it's one PIA instance.
Hakan
I didn't read the port number requirement.
You can only run one webserver instance on a port number for example port 80.
But you can still have one webserver PIA with serveral domain on the same port number as described above.
Edited by: Hakan Biroglu on Mar 14, 2012 2:28 PM -
Open and edit PDF document simultaneously in two windows
I am currently studying on a very long PDF, about 1600 pages. I have two copies of the same PDF open in full screen, and I use the first (A) to read and highlight, and the second (B) to search for images and references. So if I am on page 200 of A, and it refers to an image on page 270, instead of scrolling 70 pages and losing track of where I was I scroll on B.
That being said, I tend to highlight on both copies, and I would like to have unified highlights and comments. Is there a way to:
a) merge the comments and highlights after I close both files
or
b) instead of having two copies of the same file A and B, open two windows of the same file A and merge modificationsAdobe Reader won't but Acrobat Pro XI can open the same document in two windows and it updates both as you make changes "on the fly"...
The downside? $499.
Acrobat Standard is $299 and I don't know if it can do the "one doc two window" editing. -
Maybe two weeks ago I discovered that I could no longer open two windows at a time (I can still open multiple tabs). I am also having problems with cutting and pasting, which is crucial to my on-line job. Plus, when I exit Firefox, it doesn't always shut down, so then when you go to re-open, of course, it won't (unless you go into process and turn it off). I have re-installed multiple times and I have also used restore. Nothing seems to be fixing this and I really, really don't want to use IE, especially for work.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]
Maybe also do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]] -
My IPOD touch will not synch all songs in my library. Library is on a windows 8 laptop. Checking the songs does not matter. I have multiple devices (ipod, IPhone 4 and 5, IPad 2) and two ITunes accounts.
All songs play on the laptop windows 8. The second Ipod touch we have - all songs synch to it and play.
But the first Ipod touch we bought - only half (or so) of the songs synch. So I assume there is an issue with the newer Ipod touch. The songs not synching are songs I added to the library from CD's. -
how do i stop two windows from openning when i click on an email link, the home page and the link both open. i just want the link to open
That is a bug, so you need to wait until this get fixed.
See https://bugzilla.mozilla.org/show_bug.cgi?id=531552 - Firefox 3.6b opens two windows when opening external links
(please do not comment in bug reports) -
Greetings
I just upgraded from Mountain Lion and Windows 7 Ultimate (Bootcamp) to Yosemite and Windows 8.1 Pro on a late 2012 MBP 13" Retina. Prior to the upgrades, I was able to drive the retina panel and two external monitors simultaneously when operating directly in Bootcamp. Now, I can only drive 2 of the 3 simultaneously though all three are recognized under Graphic Properties. I simply cannot find any option or profile under Graphics Properties or Options or Personalization to run all three screens.
My hardware hasn't changed and this worked prior to the updates. I have no issue on the Mac OSX can run all three. I also have no issue doing it in Windows under Parallels Desktop 10. It is just when I boot directly into Bootcamp that this happens. What am I missing?
Thanks,
G.Great point, Loner T. It was late when I was working and I thought about this afterwards also.
The issue was that in Windows=>Control Panel=>Display, under "Change Display Settings", the three screens showed but "Extend Display" was not selected for one of the screens. It was simply off. I can't believe I danced around this w/o picking it up sooner. In fact, it has happened in the past that for some reason a display loses this setting.
As an aside, thanks again for all of your help and terrific input to upgrade both the Mac and Windows operating systems. As I was going from Windows 7 Ultimate to Windows 8.1 Pro, one thing I did come across that made life much easier was to upgrade first to Windows 8 so I could keep my apps. The jump from 7 to 8.1 would otherwise migrate my personal files, but not programs and require a lot of time to reinstall all. This was completely avoided by going to Windows 8 first.
Thanks, again, and very much appreciate the work that you do here.
Best,
G.
Maybe you are looking for
-
Dear Sir My name is sandeep and i have a technical issue with MS office Outlook 2007 standard. the problem is i have windows 8.1 pro. and i have installed office 2007 standard on it. i have also joined this windows 8.1 to Domain Network(I have do
-
All my default apps disappeared, how did that happen?
I was just deleting some unuseful Apps through iTunes, after syncing all my default apps are gone, even my "settings" icon. On my iTunes, the summary of my iphone indicated that there are 88 apps, but when i count it, there's just 79. Help, anyone?
-
i cant connect to my computer with my ipod and itunes wont connect to it either. also i have forgotten my ipod passcode
-
Can't see where I am going wrong!
Can anyone see where I am going wrong.....I can't see the problem: import java.io.*; public class EmployeeRecord { private String employeeName; private int employeeIDNumber; private String jobCat; private double hourlyPayRate; pri
-
Can't get iWork etc for free, when I try to install from App Store they are not free?