WAAS ANCS to application accelerator conversion process

Hi,
we have 20+ WAAS devices in our network environment, all are running on
Cisco Wide Area Application Services Software (WAAS) &
the device mode is : application-accelerator.
Now we brought the new WAAS which is came with the image as
Application and Content Networking System Software
& the device mode is : content-engine.
Can some one please help me that how can i convert my device mode from content-engine to application accelerator mode.

Use the recovery CD from WAAS to reimage the unit to support WAAS
The ISO can be found at the WAAS software download section if needed.
- Dan

Similar Messages

Slow Boot process + can install Intel Application Accelerator IAA

My system takes almost 35+ seconds to reach the log in screen of windows.. I think its pretty slow.. and secondly can i install Intel Application Accelerator or its only for Intel motherboards..??
Thanks

35 seconds feels like a long time, but I dont' think it's that bad. It depends on how may services get started. With time, it will take longer as you install more software.
The IAA is only required, and only works, with the ICH5R raid setup.

Utilizing Cisco WAAS (Wide area application server) to optimize CAD traffic

Hi all,
Has anyone used Cisco WAAS (Wide Area Application Server) to optimize CAD traffic for agents sitting at remote site ? if so, does the remote agent really notice any improvement login to CAD or while working in CAD ?
Thanks in advance for any inputs / suggestions !!!
D.

Hi,
The push-down, the WAAS will push down the signed SMB traffic to Generic AO.
Be aware that if you turn on SMB signing the optimzations performed will only be TFO/DRE/LZ. The signed SMB/SMBv2traffic is optimized, not accelerated with SMB AO like unsigned SMB/SMBv2 traffic.
We know this is confusing, whence: CSCub42695.
I hope answers at least some of your questions.
Regards,
Abhishek

Data Domain - Replication Acceleration vs Application Acceleration?

http://www.datadomain.com/pdf/DataDomain-Cisco-SolutionBrief.pdf
I recently read an article by Cisco detailing the WAAS appliances capability to add addional deduplicaion to Data Domain replication traffic being forwarded across the WAN. After reading the aricle and speaking with my SE. He recommended a 674 in Application Acceleration mode vs the WAE 7341 in Replication Acceleration mode. The article also states Application Acceleration mode was used.
Why is Application Acceleration mode recommended over Replication Acceleration mode for this traffic?
I have a project requiring 15 - 20 GB / day of incremental backups to be replicated between 3 sites. The sites are 90 ~ 110ms apart and the links are around 20mbps at each site. Would a 674 in Application Acceleration mode really make a difference for the Data Domain replications?

Is their any possibility you could dig up the configuration that was used on the WAAS Application Accelerator during the Data Domain testing. I see Data Domain replication service runs over port TCP 4126. My SE recommends disabling the WAE 674s DRE functions for the Data Domain traffic and simply reply on LZ & TFO. How do you simply disable DRE, but still use LZ and TFO?
I see 3 common settings;
action optimize full                                                       LZ+TFO+DRE
action optimize DRE no compression none          TFO only
action pass-through                                                    bypass
Can you do LZ+TFO only? None of the applications in the link below show this type of action setting. This leads me to believe my SE was really suggesting turn off DRE completely for the WAAS.
This WAAS needs to optimize traffic for;
Lotus-Notes, HTTP, CIFS, Directory Services, RDP, and Data Domain
Can all applications above + Data Domain be optimized from a pair of WAE 674s in AA mode?
http://cisco.biz/en/US/docs/app_ntwk_services/waas/waas/v407/configuration/guide/apx_apps.html
policy-engine application
   name Data-Domain
   classifier Data-Domain
      match dst port eq 4126
exit
   map basic
      name Data-Domain classifier Data-Domain action optimize DRE no compression LZ
exit

While upgrading 574 Application Accelerator to 4.4.7 System Crashed

I was upgradeing from 4.2.3c to 4.4.7
I upgraded the Central Manager without a problem
Went to upgrade the 574 Application Accelerator
With the following command
"Copy ftp install ftpserver / waas-universal-4.4.7.4-k9.bin"
So I ran "reload" and now it freezes at the lines below upon reboot
dbgrub_start.s
Booting the Kernel
Kernal Alive
Kernal direct mapping tables to la7fff000 @ 8000-10000
It gets to that point and just freezes. What would be the best steps to follow to try to get this back up without blowing it away?
and it hung up d

Ok, much better. I can connect to it now, but it looks like the configuration is blown away.
I am not sure what would be the best way to get back online from this point.
Before upgrading it did a backup and stored it locally on the disc. Is there a way to get that backup restored? Should I be using the 4.2.3c rescue disk to acomplish this, or can I use the 4.4.7 that I am upgrading it to?
Also I have a backup that I ran from management connection from HTTPS:
Can I use the 4.4.7 rescue cd blow the old system away then do a restore from this backup that I made from the cisco wae under the backup tab?
Thanks for your help!

Is there a way to stop and then resume an ipod video conversion process?

I am trying to convert videos to play on my new iPod Classic. The conversion process is painfully slow. I need to move the computer. Is there a way to stop the conversion process and then resume it later where you left off? The only way I have been able to figure it out is to put the laptop to sleep and then open it up later to resume. This is a problem too as I have an external USB drive hanging off the side. Any ideas?
Thanks all in advance for your help.

AFAIk you can just uninstall Thunderbird and reinstall. The profile will not be deleted. If you want to make sure, however, make a backup of your profile folder first.
Read up on "backup", e.g. here : http://email.about.com/od/mozillathunderbirdtips/qt/et_backup_prof.htm
(google is your friend :9 )
P.S. _ Matter of fact you should regularly backup your data (e.g. your thunderbirdprofile) to some place different so as not to loose it all, if a thunderbird-bug/virus/windows-failure/Layer8-Problem corrupts your data.

EXECUTE_METHOD_BOR - Application method has processed message 'E'; see long

Hi All,
I am having the following error in the workflow. Actually the WF was working fine and the past few days i am getting this error.
EXECUTE_METHOD_BOR - Application method has processed message 'E'; see long text
Actually the error occurs in the sub WF, in the method cancel invoice. it has one return variable the l_return but the method is not returning any value. The step is a background step.
The error is
Application method has processed message 'E'; see long text
Message no. SWF_RUN669
Diagnosis
The workflow runtime system has called an application method in a tRFC or background context. A message was processed within this application method. This results in work item processing being terminated in this context.
The processed message has the following parameters:
ID: CRM_ORDER_MISC
Type: E
Number: 106
System ResponseThe workflow runtime system has recognized this status and has caught the message. The status of the active work item is set to 'ERROR'.
Procedure
Identify the message statement in the application method and replace it with the command "Message....Raising". If the method is part of the standard shipment, create an OSS message for the relevant application component.
Procedure for System Administration
Once you have corrected the method, restart the workflow instance concerned by using Workflow administration.
I started the WF from SWPR still the error persists. I dont know whether the error is in the method or in trfc.
Kindly suggest what to do.
Thanks in advance.

Hello !
Check automatic workflow customizing at SWU3 and authorizations at SU53 transactions.
Regards,
S.Suresh.

Application Engine Server process dies on Windows

Hi experts,
We developed an AE in which employee data will be calculated and inserted to HR core table via CI. We started multiple instance of the AE by people code, most of them will success but others run into error and reported "Process XXX is marked 'Initiated' or 'Processing' but no longer running.". On further research we found the windows process (PSAESRV) died and a folder named PSAESRV.PID was generated in process scheduler log directory. The following can be found in "process_state.txt" in the directory:
Exception: (0xC0000005) EXCEPTION_ACCESS_VIOLATION - Memory access violation
(The memory at 0x00133000 could not be read)
Exception location:
Fault address=0x2500b836 0001:0000a836 C:\PT850\BIN\SERVER\WINX86\pscmnutils.dll
Other information:
Tools: 8.50
Server:Windows XP SP3.
Database:Oracle 10.2.0.1.0.
Could any one figure out what's the problem?
Edited by: user9546195 on 2010-12-7 下午10:32

Yes it's running on Windows XP professional. We run the test both in Linux Server and Windows XP. So far no error has been found in Linux Server. We began performance test and found the error on Windows XP on April,2010. Then we refine the code and test again these days, and the error happens again with the same error message.
*Not sure whether the Peopletools is up-to-date or not, the version of modules can be found in the "process_state.txt" file of the dead process. Attached below is the file.
Thanks!
Crash report file opened as 'C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\LOGS\PSAESRV.6604\process_state.txt'
==================================================================================
Process state report - Start
Local Time: Wed Dec 08 13:40:55 2010
UTC Time: Wed Dec 08 05:40:55 2010
Timezone: China Standard Time
==================================================================================
==================================================================================
Process information
Process ID: 6604
==================================================================================
System information:
Architecture: x86
OS Name: Windows
OS Version: XP Professional (Kernel 5.1, Build 2600, Service Pack 3)
OS Parameters: %SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,3072,512 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16
Physical memory: 3327MB total, 243MB available
Paging space: 6319MB total, 868MB available
==================================================================================
Process diagnostics - Start
==================================================================================
Stack Trace
Stack trace for process ID: 6604
Thread 3400 (Exception thread):
Address Frame Function Arguments Module!Symbol Name
0x2500b836 0x0012f8b4 0x16219ada 0x03c24ca8 0x01940e58 0x2500d746 EXP pscmnutils!CWriteFrame::Copy+0xf6
0x2500cab7 0x0012f8fc 0x197eeda0 0x0572d250 0x0572d250 0x0012f94c EXP pscmnutils!CWriteFrame::FlushSecondaryAttachList+0x87
0x28102666 0x0012f91c 0x0012f970 0000000000 0x0012f958 0x2810d7ce EXP psnetapi!CNetSendMsg::~CNetSendMsg+0x76
0x28102723 0x0012f92c 0x00000001 0x197eede4 0x01940e58 0000000000 EXP psnetapi!CNetSendMsg::~CNetSendMsg+0x133
0x2810d7ce 0x0012f958 0x273a8f13 0x01940e58 0x01970a70 0x01214448 EXP psnetapi!CNetReqRepSvc::~CNetReqRepSvc+0xfe
0x004014a5 0x0012fb7c 0x01940e58 0x273a8fdf 0x0193f8a8 0x0121b250 *** PSAESRV!<symbol>
0x00401c38 0x0012fbb0 0x01940e58 0x01214448 0x0193d750 0x0121b250 *** PSAESRV!<symbol>
0x6046776e 0x0012fc58 0x0121b250 0x0012fcd8 0x03452198 0x00000001 EXP LIBTUX!tmsvcdsp+0xc4e
0x604847fb 0x0012fca8 0x0121b250 0x0012fcd8 0000000000 0x0121db68 EXP LIBTUX!tmrcvrq+0x73b
0x6048a1a9 0x0012fcfc 0000000000 0x7c93003d 0000000000 0x0012fd20 EXP LIBTUX!tmrunserver+0xe19
0x7c930021 0x0012fd04 0000000000 0x0012fd20 0000000000 0x0012fd28 EXP ntdll!RtlFreeHeap+0x114
<Invalid stack frame detected: Frame address 0000000000 should be higher than 0x0012fd04>
0x7c93003d 0000000000 0000000000 0000000000 0000000000 0000000000 EXP ntdll!RtlFreeHeap+0x130
Thread 17664:
Address Frame Function Arguments Module!Symbol Name
0x7c92e4f4 0x01ccff44 0x00000002 0x01ccff6c 0000000000 0x000493e0 EXP ntdll!KiFastSystemCallRet+0x0
0x77dc8601 0x01ccffb4 0000000000 0x7c93428f 0000000000 0000000000 EXP ADVAPI32!WmiFreeBuffer+0x24e
0x7c80b713 0x01ccffec 0x77dc845a 0000000000 0000000000 0x00000032 EXP kernel32!GetModuleFileNameA+0x1b4
Thread 31556:
Address Frame Function Arguments Module!Symbol Name
0x7c92e4f4 0x03c23ac4 0xffffffff 0000000000 0x03c23ae8 0x29712bab EXP ntdll!KiFastSystemCallRet+0x0
0x7c802455 0x03c23ad4 0xffffffff 0x4cff1a68 0x0121cab0 0x03c24204 EXP kernel32!Sleep+0xf
0x29712bab 0x03c23ae8 0xffffffff 0000000000 0x18b31bb3 0x00000057 EXP pspal!PSPAL_GetThread+0x11b
0x297011cc 0x03c24204 0x2971a970 0x2971a5a8 0x00000241 0x2971a9ac EXP pspal!<symbol>
0x29705515 0x03c24240 0x03c24844 0000000000 0x781778f1 0x00000057 EXP pspal!PSPAL_GetExceptionHandler+0xc25
0x29705c32 0x03c24258 0x03c24844 0x18b31c1b 0000000000 0x7c885780 EXP pspal!PSPAL_GetExceptionHandler+0x1342
0x29706502 0x03c245ac 0x03c24844 0000000000 0000000000 0000000000 EXP pspal!PSPAL_GetExceptionHandler+0x1c12
0x7c864031 0x03c2481c 0x03c24844 0x7c839b21 0x03c2484c 0000000000 EXP kernel32!UnhandledExceptionFilter+0x1c7
0x7c83ab38 0x03c2ffec 0x7813286e 0x0341cba0 0000000000 0x00000008 EXP kernel32!ValidateLocale+0x1328
==================================================================================
Loaded Modules
Base Version Name
0x00400000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\PSAESRV.exe
0x7C920000 5.01.2600.5512 C:\WINDOWS\system32\ntdll.dll
0x7C800000 5.01.2600.5512 C:\WINDOWS\system32\kernel32.dll
0x60420000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBTUX.dll
0x78130000 8.00.50727.4053 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\MSVCR80.dll
0x77BE0000 7.00.8638.5512 C:\WINDOWS\system32\msvcrt.dll
0x60D90000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBENGINE.dll
0x71A40000 5.01.2600.5512 C:\WINDOWS\system32\WSOCK32.dll
0x71A20000 5.01.2600.5512 C:\WINDOWS\system32\WS2_32.dll
0x77DA0000 5.01.2600.5512 C:\WINDOWS\system32\ADVAPI32.dll
0x77E50000 5.01.2600.6015 C:\WINDOWS\system32\RPCRT4.dll
0x77FC0000 5.01.2600.5834 C:\WINDOWS\system32\Secur32.dll
0x71A10000 5.01.2600.5512 C:\WINDOWS\system32\WS2HELP.dll
0x77D10000 5.01.2600.5512 C:\WINDOWS\system32\USER32.dll
0x77EF0000 5.01.2600.5512 C:\WINDOWS\system32\GDI32.dll
0x60D30000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBFML.dll
0x60D10000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBFML32.dll
0x60C90000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBGICONV.dll
0x60EE0000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBBUFT.dll
0x10000000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBUTRACE.dll
0x76990000 5.01.2600.5512 C:\WINDOWS\system32\ole32.dll
0x29700000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspal.dll
0x29600000 1.10.0000.0000 C:\PT850\BIN\SERVER\WINX86\TRIO.dll
0x7D590000 6.00.2900.6018 C:\WINDOWS\system32\SHELL32.dll
0x77F40000 6.00.2900.5912 C:\WINDOWS\system32\SHLWAPI.dll
0x76BC0000 5.01.2600.5512 C:\WINDOWS\system32\PSAPI.DLL
0x03000000 6.09.0003.0113 C:\PT850\BIN\SERVER\WINX86\dbghelp.dll
0x77BD0000 5.01.2600.5512 C:\WINDOWS\system32\VERSION.dll
0x7C420000 8.00.50727.4053 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\MSVCP80.dll
0x00430000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psaesrvutils.dll
0x25000000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pscmnutils.dll
0x76B10000 5.01.2600.5512 C:\WINDOWS\system32\WINMM.dll
0x30E00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspetssl.dll
0x00470000 C:\PT850\BIN\SERVER\WINX86\PSLIBEAY32.dll
0x00550000 1.02.0002.0000 C:\PT850\BIN\SERVER\WINX86\zlib1.dll
0x28100000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psnetapi.dll
0x29800000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\PSJNI.dll
0x27E00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psmt.dll
0x25200000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pscompat.dll
0x24A00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psbtunicode.dll
0x24F00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pscmn.dll
0x005E0000 7.18.0001.0000 C:\PT850\BIN\SERVER\WINX86\libpscurl.dll
0x00630000 C:\PT850\BIN\SERVER\WINX86\PSSSLEAY32.dll
0x12000000 C:\PT850\BIN\SERVER\WINX86\xerces-depdom_2_6.dll
0x00680000 2.05.0000.0000 C:\PT850\BIN\SERVER\WINX86\xerces-c_2_6.dll
0x2B700000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psperfagent.dll
0x692E0000 5.00.2195.4952 C:\PT850\BIN\SERVER\WINX86\pdh.dll
0x76320000 6.00.2900.5512 C:\WINDOWS\system32\comdlg32.dll
0x5D170000 5.82.2900.5512 C:\WINDOWS\system32\COMCTL32.dll
0x770F0000 5.01.2600.5512 C:\WINDOWS\system32\OLEAUT32.dll
0x60530000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBTMIB.dll
0x606C0000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBQM.dll
0x606B0000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBQS.dll
0x24600000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psappeng.dll
0x24D00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psbufapi.dll
0x2DC00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pssys.dll
0x27700000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psmath.dll
0x27A00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psmgr.dll
0x2CD00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pssam.dll
0x27D00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psmsf.dll
0x2AF00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspceval.dll
0x00940000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psdbgutils.dll
0x2B000000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspcm.dll
0x25C00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psfinmth.dll
0x2C500000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspubsub.dll
0x27200000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pskeystore.dll
0x30600000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psxmldoc.dll
0x009C0000 1.09.0000.0000 C:\PT850\BIN\SERVER\WINX86\Xalan-C_1_9.dll
0x00C20000 C:\PT850\BIN\SERVER\WINX86\XalanMessages_1_9.dll
0x26800000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psintbrkr.dll
0x26C00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psiobase.dll
0x26D00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psiocls.dll
0x3E410000 7.00.6000.17080 C:\WINDOWS\system32\WININET.dll
0x00C70000 6.00.5441.0000 C:\WINDOWS\system32\Normaliz.dll
0x3EAB0000 7.00.6000.17080 C:\WINDOWS\system32\iertutil.dll
0x00C80000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\PSAPIAdapter.DLL
0x25E00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psflr.dll
0x29100000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psoptshared.dll
0x2D200000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psqastransfer.dll
0x27500000 C:\PT850\BIN\SERVER\WINX86\psls.dll
0x2C300000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspsm.dll
0x2CC00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psrenutil.dll
0x2A900000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspageutil.dll
0x29F00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psstflsrvutils.dll
0x29D00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psbamparser.dll
0x30F00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pswrkrt.dll
0x782E0000 8.00.50727.4053 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.MFC_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_b77cec8e\MFC80U.DLL
0x24500000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psapmsg.dll
0x29B00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psstatecore.dll
0x2A100000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psbamutil.dll
0x29900000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psstateutil.dll
0x29200000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psoptutil.dll
0x2AA00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspams.dll
0x00DD0000 11.00.0001.0000 C:\PT850\BIN\SERVER\WINX86\cplex110.dll
0x2D100000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psqasutil.dll
0x2D400000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psserver.dll
0x011B0000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pstcagent.dll
0x2EA00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pstcproxy.dll
0x76300000 5.01.2600.5512 C:\WINDOWS\system32\IMM32.DLL
0x62C20000 5.01.2600.5512 C:\WINDOWS\system32\LPK.DLL
0x73FA0000 1.420.2600.5969 C:\WINDOWS\system32\USP10.dll
0x77180000 6.00.2900.6028 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.6028_x-ww_61e65202\comctl32.dll
0x5DBA0000 5.01.2600.5512 C:\WINDOWS\system32\rdpsnd.dll
0x762D0000 5.01.2600.5512 C:\WINDOWS\system32\WINSTA.dll
0x5FDD0000 5.01.2600.5694 C:\WINDOWS\system32\NETAPI32.dll
0x2D300000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pssecurity.dll
0x5D360000 8.00.50727.4053 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.MFCLOC_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_0ccc058c\MFC80CHS.DLL
0x60130000 10.03.0000.0000 C:\fusion\tuxedo10gR3_VS2005\bin\registry.dll
0x25700000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\PSORA.dll
0x01FF0000 10.02.0000.0000 D:\ORACLE\BIN\OCI.dll
0x7C340000 7.10.3052.0004 C:\WINDOWS\system32\MSVCR71.dll
0x61C20000 10.02.0000.0000 D:\oracle\bin\OraClient10.Dll
0x60870000 10.02.0000.0000 D:\oracle\bin\oracore10.dll
0x60A80000 10.02.0000.0000 D:\oracle\bin\oranls10.dll
0x63690000 10.02.0000.0000 D:\oracle\bin\oraunls10.dll
0x01F30000 10.02.0000.0000 D:\oracle\bin\orauts.dll
0x636B0000 10.02.0000.0000 D:\oracle\bin\oravsn10.dll
0x60FA0000 10.02.0000.0000 D:\oracle\bin\oracommon10.dll
0x02050000 10.02.0000.0000 D:\oracle\bin\orageneric10.dll
0x63430000 10.02.0000.0000 D:\oracle\bin\orasnls10.dll
0x025B0000 10.02.0000.0000 D:\oracle\bin\oraxml10.dll
0x01F40000 7.00.2600.5512 C:\WINDOWS\system32\MSVCIRT.dll
0x60960000 10.02.0000.0000 D:\oracle\bin\oran10.dll
0x62740000 10.02.0000.0000 D:\oracle\bin\oranl10.dll
0x62790000 10.02.0000.0000 D:\oracle\bin\oranldap10.dll
0x627F0000 10.02.0000.0000 D:\oracle\bin\orannzsbb10.dll
0x62530000 10.02.0000.0000 D:\oracle\bin\oraldapclnt10.dll
0x62670000 10.02.0000.0000 D:\oracle\bin\orancrypt10.dll
0x62920000 10.02.0000.0000 D:\oracle\bin\oranro10.dll
0x626B0000 10.02.0000.0000 D:\oracle\bin\oranhost10.dll
0x62660000 10.02.0000.0000 D:\oracle\bin\orancds10.dll
0x629C0000 10.02.0000.0000 D:\oracle\bin\orantns10.dll
0x02710000 10.02.0000.0000 D:\oracle\bin\orapls10.dll
0x02A70000 10.02.0000.0000 D:\oracle\bin\oraslax10.dll
0x63080000 10.02.0000.0000 D:\oracle\bin\oraplp10.dll
0x61ED0000 10.02.0000.0000 D:\oracle\bin\orahasgen10.dll
0x62AB0000 10.02.0000.0000 D:\oracle\bin\oraocr10.dll
0x62B20000 10.02.0000.0000 D:\oracle\bin\oraocrb10.dll
0x62980000 10.02.0000.0000 D:\oracle\bin\orantcp10.dll
0x02A80000 10.02.0000.0000 D:\oracle\bin\orasql10.dll
0x719C0000 5.01.2600.5512 C:\WINDOWS\system32\mswsock.dll
0x02DD0000 5.01.2600.5512 C:\WINDOWS\system32\hnetcfg.dll
0x71A00000 5.01.2600.5512 C:\WINDOWS\System32\wshtcpip.dll
0x71F00000 5.01.2600.5512 C:\WINDOWS\system32\security.dll
0x77C40000 5.01.2600.5876 C:\WINDOWS\system32\msv1_0.dll
0x76760000 5.01.2600.5512 C:\WINDOWS\system32\cryptdll.dll
0x76D30000 5.01.2600.5512 C:\WINDOWS\system32\iphlpapi.dll
0x2BE00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psppr.dll
0x02F80000 C:\PT850\BIN\SERVER\WINX86\PSUSER.DLL
0x76FA0000 2001.12.0000.4414 C:\WINDOWS\system32\CLBCATQ.DLL
0x77020000 2001.12.0000.4414 C:\WINDOWS\system32\COMRes.dll
0x28700000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psoftapi.dll
0x55300000 4.00.0001.0002 C:\PT850\BIN\SERVER\WINX86\pdflib.dll
Process diagnostics - End
==================================================================================
==================================================================================
Internal process state - Start
==================================================================================
Abort message:
Unrecoverable exception received
==================================================================================
Exception context:
Exception record:
Exception: (0xC0000005) EXCEPTION_ACCESS_VIOLATION - Memory access violation
(The memory at 0x00133000 could not be read)
Exception is continuable
Machine context:
eip:2500b836
eflags:00210283
system: [ ID:1 VIP:0 VIF:0 AC:0 VM:0 RF:1 NT:0 IOPL:0 IF:1 TF:0 ]
status: [ OF:0 SF:1 ZF:0 AF:0 PF:0 CF:1 ]
control: [ DF:0 ]
cs:001b ds:0023 es:0023 fs:003b gs:0000 ss:0023
eax:00002386 ebx:16219a00 ecx:00133000 edx:3eb0003a
esi:0572d250 edi:0012e8e4 ebp:0012f8b4 esp:0012f8a8
fpcw:027f [ X:0 RC:0(nearest) PC:2(double) PM:1 UM:1 OM:1 ZM:1 DM:1 IM:1 ]
fpsw:0120 [ B:0 C3:0 TOP:0 C2:0 C1:0 C0:1 ES:0 SF:0 PE:1 UE:0 OE:0 ZE:0 DE:0 IE:0 ]
fptw:ffff
fip:001b:2b70cc0d
fdp:0023:0012e9f0
st0:000078141fe4fffffffc (empty) 0
st1:0000781420637c8097d0 (empty) 0
st2:00270000000700000000 (empty) nan
st3:2e58781c19f800000000 (empty) nan
st4:00000000000000d7fa01 (empty) 0
st5:000000d7f90460e65d5b (empty) 0
st6:400ec547000000000000 (empty) 50503
st7:00000000000000000000 (empty) 0
mm0:78141fe4fffffffc
:fffffffc 78141fe4
:fffc ffff 1fe4 7814
:fc ff ff ff e4 1f 14 78
mm1:781420637c8097d0
:7c8097d0 78142063
:97d0 7c80 2063 7814
:d0 97 80 7c 63 20 14 78
mm2:0000000700000000
:00000000 00000007
:0000 0000 0007 0000
:00 00 00 00 07 00 00 00
mm3:781c19f800000000
:00000000 781c19f8
:0000 0000 19f8 781c
:00 00 00 00 f8 19 1c 78
mm4:0000000000d7fa01
:00d7fa01 00000000
:fa01 00d7 0000 0000
:01 fa d7 00 00 00 00 00
mm5:00d7f90460e65d5b
:60e65d5b 00d7f904
:5d5b 60e6 f904 00d7
:5b 5d e6 60 04 f9 d7 00
mm6:c547000000000000
:00000000 c5470000
:0000 0000 0000 c547
:00 00 00 00 00 00 47 c5
mm7:0000000000000000
:00000000 00000000
:0000 0000 0000 0000
:00 00 00 00 00 00 00 00
mxcsr:00001f80 [ FZ:0 RC:0 PM:1 UM:1 OM:1 ZM:1 DM:1 IM:1 DAZ:0 PE:0 UE:0 OE:0 ZE:0 DE:0 IE:0 ]
xmm0:00000000000000000000000000000000
:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
:0000 0000 0000 0000 0000 0000 0000 0000
:00000000 00000000 00000000 00000000
:0000000000000000 0000000000000000
: 0.000000e+00 0.000000e+00 0.000000e+00 0.000000e+00
: 0.000000000000000e+00 0.000000000000000e+00
xmm1:00660020007300730065006300630061
:61 00 63 00 63 00 65 00 73 00 73 00 20 00 66 00
:0061 0063 0063 0065 0073 0073 0020 0066
:00630061 00650063 00730073 00660020
:0065006300630061 0066002000730073
: 9.091850e-39 9.275524e-39 1.056124e-38 9.367265e-39
: 9.345982464254671e-307 9.790542281716366e-307
xmm2:0020007200650073007500200072006f
:6f 00 72 00 20 00 75 00 73 00 65 00 72 00 20 00
:006f 0072 0020 0075 0073 0065 0072 0020
:0072006f 00750020 00650073 00200072
:007500200072006f 0020007200650073
: 1.046940e-38 1.074480e-38 9.275546e-39 2.938896e-39
: 1.869105501982261e-306 4.450631538595433e-308
xmm3:0067006e0061006800630020006f0074
:74 00 6f 00 20 00 63 00 68 00 61 00 6e 00 67 00
:0074 006f 0020 0063 0068 0061 006e 0067
:006f0074 00630020 00610068 0067006e
:00630020006f0074 0067006e00610068
: 1.019390e-38 9.091759e-39 8.908189e-39 9.459210e-39
: 8.455497966197594e-307 1.023608670170218e-306
xmm4:00610070002000650068007400200065
:65 00 20 00 74 00 68 00 65 00 20 00 70 00 61 00
:0065 0020 0074 0068 0065 0020 0070 0061
:00200065 00680074 00200065 00610070
:0068007400200065 0061007000200065
: 2.938877e-39 9.551054e-39 2.938877e-39 8.908200e-39
: 1.068114220898795e-306 7.566011645531745e-307
xmm5:0020002e00640072006f007700730073
:73 00 73 00 77 00 6f 00 72 00 64 00 2e 00 20 00
:0073 0073 0077 006f 0072 0064 002e 0020
:00730073 006f0077 00640072 0020002e
:006f007700730073 0020002e00640072
: 1.056124e-38 1.019391e-38 9.183709e-39 2.938800e-39
: 1.379626599065753e-306 4.450342947103102e-308
xmm6:00610063002000720065007300550020
:20 00 55 00 73 00 65 00 72 00 20 00 63 00 61 00
:0020 0055 0073 0065 0072 0020 0063 0061
:00550020 00650073 00200072 00610063
:0065007300550020 0061006300200072
: 7.806062e-39 9.275546e-39 2.938896e-39 8.908182e-39
: 9.346091108988483e-307 7.565923370506860e-307
xmm7:006100200079006c006e006f0020006e
:6e 00 20 00 6f 00 6e 00 6c 00 79 00 20 00 61 00
:006e 0020 006f 006e 006c 0079 0020 0061
:0020006e 006e006f 0079006c 00610020
:006e006f0020006e 006100200079006c
: 2.938890e-39 1.010206e-38 1.111225e-38 8.908088e-39
: 1.335119688726395e-306 7.565468423830832e-307
==================================================================================
Exception location:
Fault address=0x2500b836 0001:0000a836 C:\PT850\BIN\SERVER\WINX86\pscmnutils.dll
==================================================================================
Process information
Process name: PSAESRV
Command line: PSAESRV -C dom=PSNT_58039 -g 101 -i 3 -u XIAOWEI2-CN -U "C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\LOGS\TUXLOG" -m 0 -R 15612 -o .\LOGS\stdout -e .\LOGS\stderr -- -CD HC91PT -S PSAESRV
Process ID: 6604
Parent process ID: 2680
Process owner: NT AUTHORITY\SYSTEM
Desktop: \Sessions\0\Windows\WindowStations\WinSta0\Desktops\Default
==================================================================================
Thread information
Current thread ID: 3400
==================================================================================
Virtual Memory
Virtual memory: 2047MB total, 1508MB available
==================================================================================
Environment Variables
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\Administrator\Application Data
APPDIR=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT
APP_PW=PS
BDMCONFIG=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\HC91PT\PSBDMCFG
CLIENTNAME=Console
COMMONPROGRAMFILES=C:\Program Files\Common Files
COMPUTERNAME=XIAOWEI2-CN
COMSPEC=C:\WINDOWS\system32\cmd.exe
DEFLOGDIR=C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
FIELDTBLS=tpadm
FLDTBLDIR=C:\fusion\tuxedo10gR3_VS2005\udataobj
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Administrator
JAVA_OPTS="-Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Xms32m -Xmx64m"
JAVA_PLUGIN_WEBCONTROL_ENABLE=1
LD_LIBRARY_PATH=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT;C:\fusion\tuxedo10gR3_VS2005\lib;\lib;\user\lib;
LOGONSERVER=\\XIAOWEI2-CN
NLSPATH=C:\fusion\tuxedo10gR3_VS2005\locale\C
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=D:\oracle
ORACLE_SID=HC91PT
OS=Windows_NT
PATH=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT;C:\fusion\tuxedo10gR3_VS2005\bin;\bin;C:\PT850\bin\server\winx86;C:\PT850\jre\bin\client;D:\ORACLE\BIN;C:\WINDOWS;C:\WINDOWS\SYSTEM32;C:\PT850\verity\winx86\_nti40\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB=D:\oracle\perl\5.8.3\lib\MSWin32-x86;D:\oracle\perl\5.8.3\lib;D:\oracle\perl\5.8.3\lib\MSWin32-x86;D:\oracle\perl\site\5.8.3;D:\oracle\perl\site\5.8.3\lib;D:\oracle\sysman\admin\scripts;
PMID=XIAOWEI2-CN
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
PROGRAMFILES=C:\Program Files
PROMPT=$P$G
PSAPPSERVSTARTUP=N
PS_CFG_HOME=C:\Documents and Settings\Administrator\psft\pt\8.50
PS_HOME=C:\PT850
PS_MACH=XIAOWEI2-CN
PS_SERVDIR=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT
PS_SERVER_CFG=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\psprcs.cfg
SESSIONNAME=Console
SYSTEMDRIVE=C:
SYSTEMROOT=C:\WINDOWS
TEMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
TMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
TUXCONFIG=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\PSTUXCFG
TUXDIR=C:\fusion\tuxedo10gR3_VS2005
UBBCONFIG=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\psprcsrv.ubb
USERDOMAIN=XIAOWEI2-CN
USERNAME=Admin
USERPROFILE=C:\Documents and Settings\Administrator
VIEWDIR=C:\fusion\tuxedo10gR3_VS2005\udataobj
VIEWFILES=mib_views.VV,tmib_views.VV
VSEDEFLOGDIR=C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
WINDIR=C:\WINDOWS
NTSYMBOL_PATH=C:\PT850\bin\server\winx86
TUXOFFSET=0
ULOGPFX=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\LOGS\TUXLOG
PS_NLS_LANG=SIMPLIFIED CHINESE_CHINA.ZHS16GBK
NLS_LANG=SIMPLIFIED CHINESE_CHINA.UTF8
PS_COBOLTYPE=U
PSPRCSLOGDIR=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\log_output\AE_HR_CPI_POST_1820
==================================================================================
Execution Options
Global flags: 0x00000000
==================================================================================
Application state
PeopleTools process state
Writing PeopleTools state to C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\LOGS\PSAESRV.6604\peopletools_state.txt
ERROR: Timed out waiting for internal process state
Internal process state - End
==================================================================================
Process state report - End
==================================================================================

Conversion process(job work - MTO) delivery issue

Hi All,
We are unable to create delivery for a conversion process sales order(Job work - MTO) for which stocks are reserved from 5th nov 2011. The sale order is created on 5th nov 2011.
We are getting the following error message: Message no. VL455 "The sales order you want to deliver, sales order 1101200011 with order type ZO03, either contains no delivery-relevant items or its delivery-relevant items have already been delivered."
For the same sale order we are able to do the delivery from 23rd nov 2011 onwards.
But we are not able to create deliver for the materials between 5th to 23rd.
Please could any one suggest a solution for the above issue.
Regards
Srinivas
Edited by: yenigalla on Nov 4, 2011 9:15 AM

Hie,
This is because the schedule line in the sales order has confirmed the date for delivery as 23rd novemner. If the material is available (it should be reserved for that sales order since it is MTO) at 3rd novbr then re-run the availability check in the sales order. This will confirm the date for delivery as 3rd novbr.
Regards,
Denish.

Application Engine inbound Process

Hi all,
am new from peoplesoft.
anyone knows how to write application Engine inbound process.
please let me know.
Thanks in advance.
Regards
RS

Hey Inbound threw Application engine is a simple process
take a new file layout from application designer
drag & drop your record into file lay out definition page
go to Preview panel & select segment (your record) name , browse the flat file
go to properties -- use -- File Layout Format check exel format ok
drag your file layout into AE actions ,automatically it generates code. now Run or else use this code
Define a file,array,string,record
Assign values to the above using functions GetFile , CreateArrayRept , text file for string,GetRecord .
Check the file status open using IsOpen ,read the first value of flat file using ReadLine
Push the text into array ,next step split
assign to the record field values Local File &myfile;
Local array of string &myarray;
Local string &text;
Local Record &rec;
&myfile = GetFile("C:\Documents and Settings\Administrator\Desktop\office.txt", "r", %FilePath_Absolute);
&myarray = CreateArrayRept("", 0);
&rec = CreateRecord(Record.IN1_TBL);
If &myfile.IsOpen Then
While &myfile.ReadLine(&text);
&myarray.Push(&text);
&myarray = Split(&text, ",");
&rec.IN1_NAME.Value = &myarray [1];
&rec.IN1_LOCATION.Value = &myarray [2];
&rec.Insert();
End-While;
End-If;
&myfile.Close();

How can I restart the conversion process?

When I installed I-tunes the program started converting my WMA files to the AAC format. I let it run all day but at the end of the day I had to shut down the computer, so I stopped the process figuring it would restart when I restarted the program the next day. It does not do that. The only way I can find to do the conversion is one album at a time. Is there a way to restart the automatic conversion process?
Compaq Presario v5000 Windows XP

I don't know of an automated way to do it, but it is easy enough to do it yourself in one large batch. Note I use a Mac version of iTunes and still use iTunes6, but the following should be more or less the same anyway.
Right click the headings in your library and you will get a pop up of all the different headings. Turn on "Type" by checking it. Type is a column showing the encoding method (e.g. AAC, MP3, AIFF, WAV, etc.). Now you can click on this heading to sort your library by encoded Type. So now all the WAV files should be grouped together. You can now easily select the entire batch of WAV files, right click, and pick "Convert to xxx" where xxx is the encoder type you currently have set in your preferences for importing files. So if it is not in the format you want, go to preferences and change it. Once you pick the Convert function it will convert all the selected files to the new format.
Note that converting makes a copy leaving the original in place. So the other advantage of having the ability to sort and select a large number of files by Type is that you can also select all the WAV files to delete in one step after you have converted them all.
Patrick

Oracle conversion process

We are moving from Access to Oracle. I am new at this. How does the conversion process work?

Oracle has its migration tool. You could go to their Migration Workbench discuss group to get more help. I am trying to migrate from MS SQL Server to Oracle too. :-)
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rob ():
We are moving from Access to Oracle. I am new at this. How does the conversion process work?<HR></BLOCKQUOTE>
null

Tranport Application Component of Process Chain

Hi Gurus,
I want to collect and transport the application component of process chains. Please help to provide the solution.
Thanks
Ganesh Reddy.

Thanks,
Here is the solution.
You can create a transport and add an entry in it
R3TR TABU RSCOMPTLOGOT
Go to change mode, and expand this entry in the request and add the key you want to transport(you will need to specify which app component - you can put an * there )
The key you would want to transport would be ERSPC* (Where E is for lang = english, RSPC is the type, and * is for all app comp) or ERSPC
RSCOMPTLOGOT is the table where these components are defined. You need to transport the corresponding entries from this table.
Thanks
Ganesh Reddy.

Akamai ip application accelerator to improve LCCS Audio/Video

Greetings,
We are using Audio/Video components
in some cases (5% of the sessions) the Audio/Video quality is not so good
Has anyone tried using Akamai ip application accelerator to improve rtmfp flow?
See: http://www.akamai.com/html/solutions/ip_application_accelerator.html
Thanks,
Zeev

I've never tried that but we found we needed to adjust video and audio
quality on the fly, depending on network conditions to keep a quality Audio
and Video call going.
-Eric

ACE 4710 Application Acceleration Optimization Sample Configuration

Is the sample acceleration/optimization configuration sample in the Cisco 4700 Series Application Control Engine Appliance Application Acceleration and Optimization Configuration Guide Software Version A3(1.0)August 2008 (starting on page 1-7 of document) a valid/recommended configuration sample for acceleration/optimization, or do other Cisco validated design guides exist for the 4710 (acceleration/optimization)?

A great resource is the Solution Reference Network Design guides. Here's a link to the Application Engine design guides.
http://www.cisco.com/en/US/partner/netsol/ns751/networking_solutions_sub_program_home.html
Hope it helps.

WAAS ANCS to application accelerator conversion process

Similar Messages

Maybe you are looking for