WAAS and IP SLA operation

we are currently using the IP SLA udp jitter measurement to monitor our voice paths accross the WAN. If we implement a partial WAAS across the same WAN the voice traffic will be acellerated but not the IP SLA jitter measurement. Does this mean that when WAAS is implemented IP SLA is limited in its use?

Hi Steve,
The answer to your question depends on 1) how you deploy WAAS and 2) how you use IP SLA. If you deploy WAAS using WCCP for interception, UDP traffic will never be intercepted. If the WAAS device is deployed inline, all traffic flows through the WAAS device, so an IP SLA probe using UDP will be subject to WAAS pass-through handling behavior.
What are you trying to measure with regards to WAAS?
Zach

Similar Messages

How to Archive and Purge SLA data?

We are looking for a solution to archive and purge SLA tables. I have opened an SR with Oracle and they suggested to work with third party who specialized in archiving and purging data. I would like to see if any of the clients have developed a custom solution for this and if so what is the criteria that has been used for this
Thanks in advance,
Prathibha

Hi,
Thanks for the information.
But this traditional way of doing is archiving is for maintenance and backup operations.
We want to have this process online, without taking db offline. In this case will this approach work?
In our case, the rules can be like -
1. For table 'A', if rows exceed 10Million, then start archiving of the data for that table.
2. For table 'B', if data is older than 6 motnhs start archiving of the data for that table.
3. Archiving should be on for 15 minutes only after that should pause, and should resume whenever user wants to resume.
4. Archiving should start on specified days only... ETC...

Ip sla operations with different keys for the same destination

Hi all,
the customer wants to use different ip sla operations for the same destination (ip sla responder). From the first source router he uses key key1 and from the second source router he uses key key2. The ip sla responder responds only for the first router which uses the key key1.:-( Is it a normal behaviour? Can I use different keys for different ip sla operations for the same ip sla responder?
See the configuration on the responder:
key chain test
key 1
key-string 7 *key1*
key 2
key-string 7 *key2*
ip sla key-chain test
ip sla responder
He tried to use ip sla responders on:
Ciscu 2911
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M3, RELEASE SOFTWARE (fc2)
Cisco 881
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Thank you.
Roman

Thomas,
Have a look at:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-2mt/sec-conn-dmvpn-share-ipsec-w-tun-protect.html#GUID-2B448241-FD10-4F3B-BFF8-DFD44982D235
If you're using one tunnel source you need to use one ipsec profile, unless you're running (a) p2p tunnel which you're not in this case.
While you MAY have some luck with sharing/unsharing among different interface I'm afarid it will not be ever mentioned as supported.
The situation will change with upcomfing 3.10 and 3.11 IOS XE releases (and corresponding IOS releases).
M.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

I recently upgraded to Firefox 13.0.1 and I'm operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard). Now I'm having intermittent problems with sending

I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions?

I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions?

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this

The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this an endemic problem with others? I'm using Google Chrome as my browser. Is this an issue with the problem?

Similar problem just happened to me with the Creative Cloud Update 1.7.1.418—slightly different so I thought I'd share. I have multiple Adobe Creative Cloud programs installed on my computer, all working just fine. I updated the Cloud App to the latest version and then it shows me that I have only one program installed! All my previously installed programs (Photoshop and the like) still work but show as "install" instead of "Up to date". Initially I thought I'd have to re-install the Cloud app or recreate the OPM data base but then I noticed that some of the Cloud app preferences (Apps > Settings > App Language) were different to what I had set previously. I use English (International) language, the update had reverted the app back to English (North American). I flicked back to my previous language and bam, all my apps now show as being installed correctly.

Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7 and other microsft operating systems setting. help!!

Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7 and other microsft operating systems setting. help!!

Ask on a Windows forum since that's what you're having a problem with.

This field contains duplicate values. Remove all duplicate values and try the operation again.

Greetings Everyone,
I am getting the follow up errors: "This field contains duplicate values. Remove all duplicate values and try the operation again."
when I tried to make the field "Claim Number" from the list in site collection library. See the screen below:
1- I selected on the "List" and I clicked on the list name
"Claim Tracking Report"
2- After I clicked on the list name then I went to the ribbon and selected list setting to choose Enforce Unique for the Field Column
"Claim Number"
3- Then I went down and selected
"Yes" to Enforced the Unique for the Field Column "Claim Number".
4- Then after I clicked "Yes" I got the error
"Sorry, something went wrong. This field contains duplicate values. Remove all duplicate values and try the operation again." But I don't have any duplicates values Items, because I had them removed before I tried
to Enforce the field column values to Unique. Can someone help or provide me a suggestions on how I can solve this issue please. Thank you
FYI: I am using a Nintex Workflow

Hope this is a list, how many total items are there?
Please try to open this list as access(link in IE) and run this query in access
SELECT Claim.[Claim Number], Count(*) AS Expr1
FROM Claim
GROUP BY Claim.[Claim Number]
HAVING (((Count(*))>1));
Hope it will show something! if this does not show you dups then better to create a separate list and migrate items after configuring unique column.
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even h

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even had upgraded to the Mavericks . I do not think it's fair to have to pay again and I would like to upgrade my operating system without having to pay again for the same system.

Hi anatuta,
Thanks for visiting Apple Support Communities.
It sounds like you are trying to upgrade your Mac to a newer version of OS X, after completing a fresh install of Snow Leopard.
If you have already purchased and downloaded OS X Lion and Mavericks, you should be able to find these items in the Purchased section of the Mac App Store.
You may find the steps in this article helpful with finding the items:
Mac App Store: Finding your purchased apps - Apple Support
If you do not see the items in the Purchased section, they may be hidden:
Hide and unhide purchases in the Mac App Store - Apple Support
All the best,
Jeremy

I need to sort very large Excel files and perform other operations. How much faster would this be on a MacPro rather than my MacBook Pro i7, 2.6, 15R?

I am a scientist and run my own business. Money is tight. I have some very large Excel files (~200MB) that I need to sort and perform logic operations on. I currently use a MacBookPro (i7 core, 2.6GHz, 16GB 1600 MHz DDR3) and I am thinking about buying a multicore MacPro. Some of the operations take half an hour to perform. How much faster should I expect these operations to happen on a new MacPro? Is there a significant speed advantage in the 6 core vs 4 core? Practically speaking, what are the features I should look at and what is the speed bump I should expect if I go to 32GB or 64GB? Related to this I am using a 32 bit version of Excel. Is there a 64 bit spreadsheet that I can us on a Mac that has no limit on column and row size?

Grant Bennet-Alder,
It’s funny you mentioned using Activity Monitor. I use it all the time to watch when a computation cycle is finished so I can avoid a crash. I keep it up in the corner of my screen while I respond to email or work on a grant. Typically the %CPU will hang at ~100% (sometimes even saying the application is not responding in red) but will almost always complete the cycle if I let it go for 30 minutes or so. As long as I leave Excel alone while it is working it will not crash. I had not thought of using the Activity Monitor as you suggested. Also I did not realize using a 32 bit application limited me to 4GB of memory for each application. That is clearly a problem for this kind of work. Is there any work around for this? It seems like a 64-bit spreadsheet would help. I would love to use the new 64 bit Numbers but the current version limits the number of rows and columns. I tried it out on my MacBook Pro but my files don’t fit.
The hatter,
This may be the solution for me. I’m OK with assembling the unit you described (I’ve even etched my own boards) but feel very bad about needing to step away from Apple products. When I started computing this was the sort of thing computers were designed to do. Is there any native 64-bit spreadsheet that allows unlimited rows/columns, which will run on an Apple? Excel is only 64-bit on their machines.
Many thanks to both of you for your quick and on point answers!

XQuery with recuesive function and instance of operation gives problem

Hi,
<< Using Oracle 11g .06. release >>
I have an Xquery that has recursive functions and "instance of" operation.
I facing the following problem
"error raised during evaluation: oracle.xquery.XQException: XPTY0004: It is a type error if, during the static analysis phase, an expression is found to have a static type that is not appropriate for the context in which the expression occurs, or during the dynamic evaluation phase, the dynamic type of a value does not match a required type as specified by the matching rules in 2.5.4 SequenceType Matching.
Detail: empty sequence encountered where a sequence of length one is expected
The same xQuery works on Berkely DB, Altova XML and Oxygen. I could able to figure out the problem in oracle, where i need an help from you people.
The below is the XQuery Function
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
SELECT XMLQuery('xquery version "1.0";
declare default element namespace "WiMax_CAPC_XML";(: :)
declare namespace HHP="HHP";(: :)
declare namespace AtomicXQuery="AtomicXQuery";(: :)
declare function AtomicXQuery:filter-modifier($element as element(), $attribute-name as xs:string*) {
element {node-name($element)}
for $child in $element/node()
return if ($child instance of element())
then (("deepa instance"),$child,"45",name($child),$attribute-name,
if($child/node() instance of element())
then ("it is an instance of element")
else($child),
AtomicXQuery:filter-modifier($child, $attribute-name))
else $child
let $i:= ora:view("NECB")/node()/child::*[2]/HHP:HHP/HHP:hapNe/HHP:maxCageCount
let $m:=element HHP:deepa {element HHP:deepa1 {"deepa1"}} return AtomicXQuery:filter-modifier($m,"modifier")'
RETURNING CONTENT) AS RESULT
FROM DUAL;
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The XML data is available in XMLType table NECB.
The XMLData is as follows
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8"?>
<ConfigDataFile xmlns="WiMax_CAPC_XML" xmlns:HHP="HHP" xmlns:SWM="SWM" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<fileHeader cfgMinorVersion="0" cfgSavedMinorVersion="0" cfgVersion="0" fileFormatVersion="CAPC_I1" fileName="NECB.xml" fileType="necb" senderName="CNEOMI" swVersion="D00.00.01.05" vendorName="Motorola"/>
<configData dnPrefix="String">
<HHP:HHP>
<HHP:hapNe>
<HHP:maxCageCount>3</HHP:maxCageCount>
<HHP:minLogLevel>1</HHP:minLogLevel>
</HHP:hapNe>
<HHP:hapCageTable>
<HHP:hapCageEntry cageId="1">
<HHP:numOfModems>1</HHP:numOfModems>
<HHP:numOfBackupModems>1</HHP:numOfBackupModems>
<HHP:hapCagemaxModemCount>1</HHP:hapCagemaxModemCount>
<HHP:minModemLogLevel>1</HHP:minModemLogLevel>
<HHP:hapModemTable>
<HHP:hapModemEntry cageId="1" modemId="1">
<HHP:maxServiceTypeCount>1</HHP:maxServiceTypeCount>
<HHP:hapModemLogLevel>1</HHP:hapModemLogLevel>
<HHP:maxBlackboxCount>1</HHP:maxBlackboxCount>
<HHP:minBlackboxLogLevel>1</HHP:minBlackboxLogLevel>
<HHP:hapBlackboxTable>
<HHP:hapBlackboxEntry cageId="1" modemId="1" blackboxId="1">
<HHP:hapBlackboxLogLevel>1</HHP:hapBlackboxLogLevel>
</HHP:hapBlackboxEntry>
</HHP:hapBlackboxTable>
</HHP:hapModemEntry>
</HHP:hapModemTable>
</HHP:hapCageEntry>
</HHP:hapCageTable>
<HHP:serviceTypeTable>
<HHP:serviceTypeEntry serviceTypeId="1">
<HHP:priority>1</HHP:priority>
<HHP:serviceTypemaxModemCount>1</HHP:serviceTypemaxModemCount>
</HHP:serviceTypeEntry>
</HHP:serviceTypeTable>
<HHP:serviceMappingTable>
<HHP:serviceMappingEntry cageId="1" modemId="1" serviceTypeId="1">
</HHP:serviceMappingEntry>
</HHP:serviceMappingTable>
</HHP:HHP>
<SWM:SWM>
<SWM:wmanIfBsPagingGroupTable>
<SWM:wmanIfBsPagingGroupEntry ifIndex="1" wmanIfBsPagingGroupIndex="1">
<SWM:wmanIfBsPagingGroupId>1</SWM:wmanIfBsPagingGroupId>
<SWM:wmanIfBsPagingControllerId>9</SWM:wmanIfBsPagingControllerId>
<SWM:wmanIfBsPagingCycle>100</SWM:wmanIfBsPagingCycle>
<SWM:wmanIfBsPagingOffset>1</SWM:wmanIfBsPagingOffset>
<SWM:wmanIfBsPagingRetryCount>3</SWM:wmanIfBsPagingRetryCount>
<SWM:wmanIfBsPagingBcastRetryCount>3</SWM:wmanIfBsPagingBcastRetryCount>
<SWM:wmanIfBsPagingControllerAddress>aabbccddeeffaabbccddeeffaabbccddeeffaabbccddeeffaabbccddeeffaabb</SWM:wmanIfBsPagingControllerAddress>
<SWM:wmanIfBsPagingControllerAddressType>1</SWM:wmanIfBsPagingControllerAddressType>
<SWM:wmanIfBsPagingControllerAsnMmId>aabbccddeeff</SWM:wmanIfBsPagingControllerAsnMmId>
</SWM:wmanIfBsPagingGroupEntry>
</SWM:wmanIfBsPagingGroupTable>
<SWM:wmanIfAsnMmTable>
<SWM:wmanIfAsnMmEntry ifIndex="1">
<SWM:wmanIfAsnMmId>AAffFFAAAAFF</SWM:wmanIfAsnMmId>
<SWM:wmanIfAsnMmId/>
</SWM:wmanIfAsnMmEntry>
</SWM:wmanIfAsnMmTable>
<SWM:wmanIfNeighborAsnMmTable>
<SWM:wmanIfNeighborAsnMmEntry ifIndex="1" wmanIfNbrAsnMmId="AAffFFAAAAFFFFFF">
<SWM:wmanIfNbrAsnMmAddress>AAffFFAAAAFFFFFF</SWM:wmanIfNbrAsnMmAddress>
<SWM:wmanIfNbrAsnMmAddressType>1</SWM:wmanIfNbrAsnMmAddressType>
<SWM:wmanIfNbrAsnMmControlSecurityProtocol>1</SWM:wmanIfNbrAsnMmControlSecurityProtocol>
</SWM:wmanIfNeighborAsnMmEntry>
</SWM:wmanIfNeighborAsnMmTable>
</SWM:SWM>
</configData>
<fileFooter dateTime="2007-11-07T09:30:47.0Z" update="2007-11-07T09:30:47.0Z"/>
</ConfigDataFile>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The expected output XML is as follows
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
<HHP:deepa xmlns="WiMax_CAPC_XML" xmlns:HHP="HHP">deepa instance<HHP:deepa1>deepa1</HHP:deepa1>45 HHP:deepa1 modifier<HHP:deepa1>deepa1</HHP:deepa1>
<HHP:deepa1>deepa1</HHP:deepa1>
</HHP:deepa>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Thanks in advance!

Ashwin,
Please try it with 11.1.0.7 instead and let us know if it works.
Regards,
Geoff

The browser Working very slowly at the first time open or when i open a new link And not as well as by And I have Operating system xp sp3 Updated

the browser Working very slowly at the first time open or when i open a new link
And not as well as by
And I have Operating system xp sp3 Updated
And i get Stop in the script

'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit)

I need to work with the RAW files on a SONY RX100III. I use Photoshop CS5 and a Mac operating system OSX 10.6.

I need to work with the RAW files on a SONY RX100III camera. I use Photoshop CS5 and a Mac operating system OSX 10.6. Is there an Camera RAW upgrade or an alternative program that works here?

You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894)

Sync and Create project operation from DTR is taking more than one hour

Hi All.
Recently basis team has implemented the track for ESS/MSS application.So When we import the track to NWDS its showing 500 Dcs.
I have successfully done the Sync and create project operation from DTR for 150 DCS and its take 5 min per Dcs.
However after that when i am trying to sync Dc or create project DC from DTR the operation is taking more than 3 hour per DC.Which should not be the case because for rest 150 DC that i ahve done Sync operation adn Create project operation from DTR it hardly takes 5 min per Dc.As this operataion is taking so much time finally i have close the NWDS to stop this operation.
I am using NWDS 2.0.15 and EP7.0 portal SP15 and NWDI is 7.0
Can any body tell how to solve this issue so that i can Sync and Create project from DTR for a DC within 5 min?
Thanks
Susmita

Hi Susmita,
If the DCs are fine in CBS build, then I feel there is no need to test all of them locally in NWDS.
You can verify some certain applications in these DCs, then you sync & create project for these DCs & test run these applications.
As I get you only need to check ( no changes will be done ), yes you can verify them in small groups (say 20-25 DCs/group) in different workspaces so that no workspace is overloaded.
But why do you want to keep a copy of them locally as you are not making any changes, you can Unsync & Remove these projects once verified & use the same workspace to work on the next set of DCs.
Hope this clarifies your concerns.
Kind Regards,
Nitin
Edited by: Nitin Jain on Apr 23, 2009 1:55 PM

WAAS and IP SLA operation

Similar Messages

Maybe you are looking for