WaaS Central Manager - device serial number report available?

Hi folks,
just wondering if anyone knows a quick/easy way to talk to the WAAS database to pull serial number information for all of my WAE's installed. i have 35 devices scattered around 7 states and I'm hoping for an easy way to collect serial number info.
I was hoping the platform report from the CM would do it, but it does not provide serial numbers of each chasis, only model and software version.
My thought is the CM probably has this data somewhere? I'm hoping to avoid having to manually telnet to 35 appliances and run the command 'show inventory' to find the appliance I am looking for.
anyone have a good shortcut?
also - anyone know what the database format is? mysql? postgres?

The best way to collect serial # remotely from a WAAS device (WAE) is by executing 'show hardware'. You may write a script to get it.
CM don't provide this info currently.
Can you please unicast me at '[email protected]' so that I will be able to understand your requirements.
thanks
Nat

Similar Messages

Is WAAS Central Manager needed for SRE?

Hello experts,
We're planning to deploy just WAAS SRE in 3945 routers at multiple sites? Do we need to buy WAAS central manager? also can WAAS SRE be configured from command line and able to save the config to text file just like on router's IOS?
Thanks

Hi,
For your setup to be supported, you need to have all of your WAAS devices registered to a Central Manager.
Will it optimise connections if you don't? Yes it will but if you run into any issues with it, you will be on your own...
Regarding the configuration, you need to have the module imported into a CM but you can do all of the config from the CLI if you prefer and only use the CM for statistical reporting.
Nicolas

My iphone was stolen ,how can i get it back {serial number is available}

dear custumer service,
kindly note that my IPhone was stolen and the stoler is using my email as well as my personal data, however , im not sure if find my iphone software is activated or not .please asset me to find my iphone or at least format it
note: serial number is available with me

1. this is not Apple customer service, this is just a forum for Apple product users
2. Apple does not have anything to do with lost or stolen devices - http://support.apple.com/kb/HT2526
3. You need to take this issue to your local police and ask them how to deal with it.

Item Manage by Serial Number

hello all,
related to my question Service Module, Can i use the Service Module?
what should i do if my item master data has an Onhand qty. and it is not manage by Serial Number, now i want to manage this item master data by Serial Number,but SBO Prompt me w/ the ff. message (You can modify the "Manage item by" setting only when the available quantiry is zero and there are no serial or batch numbers available).
please advice what is the best practice and workaround for this scenario
thanks ang best regards,
Fidel

Hi,
You can't change the item master data manage by batch to manage by serial no.
There are two solutions to solving it i.e.:
A. First solution
1. Good issue all the quantities of item manage by batch
2. Change to manage by serial number after item stock on hand is zero
if step A.2. is failed, use step B:
1. Create new item code manage by serial
2. Good issue all quantities of item manage by batch
3. set on hold for item manage by batch
JimM

Cisco WAAS Central Manager

Can someone tell me how to deploy Cisco WAAS Central Manager to manage 100 WAE devices over WAN? Is there any additional devices need to setup redundant design and any license cost included here per device basis to monitor? I need detailed solution to manage WAE devices centrally.

Vinod,
There is no need to buy additional licenses or no need to add per device license on the central manager. You can go with the 294-4G or the 474 device , these can support upto 250 devices. However would suggest you to go with a higher model so in future if you expand , you might want to replace the CM that time.
Also a central manager cannot work as a inline or wccp device nor it can do any optimization.
Regards
Abijith

WAAS Central Manager Replacement

I have need to replace a WAAS Central Manager (4.4.x). The replacement would have a new IP address. The planned path of migrating is first to setup the replacement as standby and once sync'ed promote to primary. I will then manually update the WAE devices with new IP address.
OLD CM:
WAE# configure
WAE(config)# central-manager role primary
WAE(config)# cms enable
On the standby device, execute the following CLI commands:
WAE# configure
WAE(config)# central-manager role standby
WAE(config)# central-manager address new IP
WAE(config)# cms enable
Is this idea the best approach?
Any idea if the SSL certificates would have to be revoked and re-issued (whether self signed or otherwise)?

Hi,
The steps to replace a CM hardware have been documented under the following bug:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtz47138
Basically, the steps are the following:
If the CM will be using the same hardware and IP you can restore the CMS database.
If the CM will be using a new name or IP, use the workaround provided by CSCsi59886:
1- Add new CM as standby
2- Make it primary
3- deactivate former CM in new CM GUI
4- delete former CM from new CM GUI (and make sure it s gone from the DB)
5- 'cms deregister' on former CM CLI
7- rename former CM, change its mode and reload.
8- rename the new primary and change its IP address
9- Change the IP and mode of former CM and register it
Regards,
Nicolas

Batch Management and serial Number Management

Hi Friends,
I have a an issue.
We are using Batch management and serial number for few materials.
While selecting F4 for checking available batch numbers and serial numbers during issues , transfer posting,stock transfer etc.., system dispalys all Batches/Serial numbers which are created for that particular material. i.e all Batches and serial numbers irrespective of whether there are stocks available , whether they are cancelled/deleted will appear in the list
Our requirement is when F4 is selected system should list only live/existing batch numbers and serial numbers of that particular material.
Can any one help us
Thx
Deva

Hi Ramesh,
Thanks for your input.
However my requirement is instead of going to separate T.code IQ09 , user wants to list the existing Batch/Ser no details while selecting F4 during issues
Thx
Deva

Renewing Self Signed Certificate for WAAS Central Manager

Hi,
We would like some help from you about the following: We have an WAAS Central Manager which its self-signed certificate validity has expired as showed below:
Validity
Not Before: Jul 7 00:47:06 2009 GMT
Not After : Jul 6 00:47:06 2014 GMT
We have used its certificate to install some other remote WAAS Express routers.
We would like to know the following:
1. is it possible to renew this certificate? or
2. do we need to reinstall another certificate on CM and replicate this new one on these waas express remote devices?
If affirmative for at least one of them, please, could you share any document that describe how to do it?
I have attached some output commands from our CM.
Thanks,
Marcelo

attaching file now!!!

Hard drive crash..how to get photoshop cs5 back ..serial number is available

hi
i did upgrade from photoshop cs4 to cs5 few years ago by buying an upgrade CD..now my hard drive crashed and i lost my photoshop cs5..
serial number is available but i dont have the cs5 upgrade cd. how can i get the photoshop cs5 on my laptop?
thank you

Please download the setup from:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
Please follow the instructions mentioned carefully.
Regards,
Ashutosh

Hello Apple Support, My iPhone 5 has been stolen and I want to lock the device totally. My Apple ID is ********** Stolen Device Serial Number: DN*******TWD Stolen Device EMEI: ********.

Hello Apple Support,
My iPhone 5 has been stolen and I want to lock the device totally.
My Apple ID is **********Stolen Device Serial Number: DN*******TWD
Stolen Device EMEI: *********.
<Edited by Host>

Sorry if my English isn't correct because of I'm Italian.
You must switch on the lost mode on the app " Find my iPhone ".
If you can see it on the map of this app, you will know where is your iPhone in that moment.
REMEMBER: you can see your iPhone on the map of " Find my iPhone" only if it is online. Indeed you can't see your iPhone if it's offlined or switched of.

Https certificate on WAAS Central Manager

Hi,
I wanting to know if it is possible to authenticate the WAAS central manager with a different certificate/key pair than the self-signed certificate/key pair.
I can't find any information about installing my own certificate/key pair.
Thanks in advance

We do have an option for the same:
First you may generate a CSR using:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v531/command/reference/execmds.html#wp2773266
Once done you can get the cert and import cert and keys on Central Manager using admin option
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v531/command/reference/execmds.html#wp2773369
"admin"
Specifies that the certificate and key are for the Central Manager admin service. This option can be used only on the Central Manager.
The Central Manager admin service uses a self-signed certificate and key by default. You can use the crypto import pkcs12 admin command to import a custom certificate and key in PKCS12 or PEM format. If you delete the custom certificate and key, the self-signed certificate and key again become active.
Hope this helps,
Swati

WAAS Central Manager - Procedure for changing FQDN and ip address

Software version 4.1.1c
I have the need to change my waas central manager hostname, doamin name and ip settings. What is the proper procedure to do this in order to keep the cm synchronized with the waes. I seem to have them out of sync now. Do you deregister all the waes first, change and reboot the cm, then register them again?

Hi,
check SAP note 8307 Changing host name on R/3 host: What do you do?

Advice for WAAS Central Manager?

Hello,
We are building a WAAS lab (not production) for a customer and we recently discovered that we can't use the NME-WAE-502-K9 as the central manager which was very affordable. So we are very disappointed about this. The other equipment are Cisco ISR 2811 (very affordable for building WAAS) with NME-WAE-502-K9 running WAAS 4.1.1 acting as the application accelerators. I have some questions and asking for some advice about some alternative options for us to consider:
What is the cheapest/smallest WAAS option we can use for the WAAS central manager? The only thing I could find is the WAE-512-K9, but maybe there is something else that is smaller and cheaper for consideration.
From what I read, after WAAS software version 4.1.1 it requires the Enterprise and Transport Licencing. Does the WAAS central manager have a 30,60, or 90 day trial that the CM can run before a license is required like most of the Cisco Unified Communications products today?
Thanks in advanced!
-rya

A central manager is required to managed all of your accelerators properly in a supported configuration. You don't necessarily need a physical appliance though. There is also the virtual form factor (vWAAS is the accelerator version and vCM is the manager version) that can run on a ESXi hypervisor.
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/vwaas/guide/vwaasguide.html#wp69212
John
If this is useful please mark as Helpful or Solved.

Can I create a report at WAAS central manager based on server IP address

Hi,
I have two distinct applications running at port 8080 for which I would like to have separated performance reports at Central Manager. Is there any mean to do that by using server ip address for example? If so how? Do I need to change policy? If so is that the only way?
Thanks
Wilhelm

Hi Rulix,
The latest version of CR Server is 2008. Therefore I'm assuming you are using CR Server 2008.
New in CR 2008 is the .NET report modification software development kit (SDK). The report application server (RAS) SDK is now available for users of Crystal Reports .NET API without the use of a RAS server. Report modification such as changing, adding, or removing database providers, or adding, removing, or creating report objects, parameters, formulas, and sections can be achieved by accessing the RAS SDK through the Crystal Reports .NET SDK.
Java developers however receive the JRC and Java SDK documentation through the free Crystal Reports for Eclipse download. This product will be updated on a separate schedule from Crystal Reports.
Further Information and samples are available in our [Developer Library|https://www.sdn.sap.com/irj/sdn/businessobjects?rid=/webcontent/uuid/5001d5de-f867-2b10-00bf-8d27683c85a0]
Kind regards,
Tim

WAAS Central Manager version 4.1

Hello,
I have to prepare a design of a WAAS deployment for my customer. I have an issue with the 4.1 version: Does i have to use an appliance dedicated for the management or i can use an WAE-512 with entreprise licence for managament and for WAN optimization features?
Thank you in advance

In any version of WAAS the supported configuration is to have a minimum of 2 application accelerators and one central manager. You cannot run the Central Manager and Application Accelerator on the same device.
The enterprise license unlocks specific features, notably CIFS acceleration but will not influence the number of required WAE's.

WaaS Central Manager - device serial number report available?

Similar Messages

Maybe you are looking for