WAAS Edge Cache (CIFS only or FTP also?)

Does the WAAS Edge Cache perform any function related to FTP or are the performance gains we see strictly attributed to WAAS TCP window accelerations?

The 2nd person's session will still go across the WAN to the origin server but will be optmized using TFO, DRE, LZ. However the payloads should be offloaded and served mostly off the local WAE giving you high DRE compression.
Dan

Similar Messages

Is CPA Cache refresh linked with ftp or file pooling process in XI?

Hi,
I have a file to file scenario using Transport protocol as FTP in XI 3.0 SP 15.
When we try to sends some file using ftp protocol where we are using
FTP connection parameters
Server                          = <CORRECT IP>,
Port                               = 21 ,
User name                <CORRECT NAME>,
Password                  <PASSWORD> ,
Data Connection           = Active
Connection Seq         = None
Connection Mode         = Permanently
Transfer Mode            =   Text
Processing Parameters
Quality of Service    = Exactly Once
Pooling Interval        = 1 sec
Processing Mode    = delete
File Type                   = Text
File encoding           = utf-8
The problem we are facing like some time the ftp is not working even the file is present in the location for pick up. If few files are stacked up to be collected then when we are using CPA Cache refresh in Full mode manually then it fetches all the files from the location but the problem is that ,we have a time constraint for this process to be completed in just 60 seconds if we are not able to pick up a file in 60 Secs then the file will be treated as invalid.
So I just want to know how Manual CPA CACHE refresh in full mode generally solve the problem.
Next if more files will be stacked up then cache refresh also failed to solve the problem and more cache refresh result in NOT pooling any other files in XI including the above discussed flow.
So,in anyway Cache refresh linked with ftp or file pooling process in XI?
Please assist me in correctly understating the whole problem and what solution could be put to solve this.
Thanks,
Satya
Edited by: Satya Jethy on Mar 14, 2008 12:28 PM

Hi Suraj,
If you see my query i have mentioned that the pooling interval is 1 Second.
If we are not able to pick the file with in 60 Secs as this is a real time scenario so the file will be treated as a invalid file.
Moreover this problem is happening some time.
I have also checked the component monitoring it is saying everything is ok as because we are receiving the file with out any error and the file transfer is also success.The only problem is that it is not collecting the files from the given location.
Hope i make you understnad the problem .If not please revert back i will try to explain once again.
Thanks,
Satya

Caching service only works for OS X updates and not for Apps

Hello,
It seems that my OS X Server Caching service only works for Apple OS X Software Updates (in Mac App Store updates, when the icon of Mountain Lion appears). I see it in my logs in verbose mode when I download an Apple OS X Software Updates and not when I download an app in Mac Appstore.
So I'm sure my Caching service works but not for all downloads.
Why ? What's wrong with my server ?
I read in some blogs that Caching Server can work for iOS devices appstore too. I try to download some apps with my iphone but nothing happens in logs ...
Can somebody help me about the Caching Server ?
Thank you.

I am with chugues http://www.apple.com/ios/business/
Caching Server 2 supports iOS 7.
By caching purchased content and software updates on a local Mac running OS X Mavericks Server, Caching Server 2 speeds up the download and delivery of content through the App Store, Mac App Store, iTunes Store and iBookstore. Your users get faster downloads of content and updates to their iOS devices directly over your corporate network.
Shows iOS updates and et al. Why is this feature not on yet?

Is it possible to prevent the See Also function from displaying the topic window when only one "see also" topic exists?

When you have several topics assigned to a see also button,
the see also button displays several topics within the pop-up
window in the compiled help. However, if you have only one see also
topic assigned to the button, the button automatically displays the
topic window for that topic. The first time I saw this, I thought
it was a bug. When I've asked other people to test my help
projects, they also think this is a bug.
Is it possible to "make" the see also function display the
pop-up window, regardless of how many topics are assigned to the
button?
thanks in advance,
ChristyG

Are you sure that you can change the permissions of symlinks themselves? I think I've tried to make files read-only via symlinks on a local server but ended up using bindfs because it wasn't possible. Even if you can, symlinking everything that might be necessary for a given environment would not be ideal, plus I don't think symlinks can be used across different filesystems.
If a real-life human can figure out if it's he/she is in a chroot and break out of it, then he/she can write a script to do the same. I want a sandbox that could run malicious code with no effect on the system (if that's possible). Also, I think if the chroot idea were truly feasible, makepkg would have been using it for years already to simply install packages in the chroot as you normally would and then package them. There would also be several sandbox applications that could run applications safely. So far I have yet to find any.
I admit that I haven't looked into using a chroot in detail though and of course I may have missed some application which creates such a setup. Right now I think using per-application namespaces with fuse seems the most promising but I won't know until I've finished implementing a test application. If it turns out that it's a dead end I'll take harder look at chroot but it really doesn't seem to be able to do what I want.

I'm modifying someone else's website for the first time (noob = yes). I only have ftp access to the site server. Before uploading changes, is there a easy/quick/recommended/etc way to make a copy of the files I'm about to replace?

Great, first post, sorry for the title. But to repeat it:
I'm modifying someone else's website for the first time (noob = yes). I only have ftp access to the site server. Before uploading changes, is there a easy/quick/recommended/etc way to make a copy of the files I'm about to replace?

You can use the Dreamweaver FTP (or a different FTP client) to completely copy the original website to your development computer, then, before making changes, you can copy the whole thing to a directory called something like "website original"
If you want to run both the old and new sites on the remote server, this is often possible. Add a folder/directory to the server and call it something like "new" and upload the new files there until you are ready to replace the old site
All of this you can do with FTP

In partial delivery, what does it mean by Create only one delivery (also with qty = 0)?

Hi Expert,
I would like to ask
"Create only one delivery (also with qty = 0)"
It is mentioned in Partial Delivery
The following partial delivery agreements exist:
A Create a delivery with qty greater than zero
B Create only one delivery (also with qty = 0)
C Only complete delivery allowed
D No limit to subsequent deliveries
Please provide example together.
Many thanks.
Rgds,
Ong

Dear Lit Yit Ong
The use of B is Creating only one delivery (also with quantity = 0) Same like as indicator A, only the difference is we can create a delivery with zero qty also.
Regards
venu Gopal reddy

Way to refresh cache for only one service

Is there a way to refresh cache for only one service?
Rewards points guaranteed.
Regards.

Is this really a problem? Why not invalidating the cache alt all
when it seems to be necessary?
regards
Tobias

Can anyone help me answer whether Robohelp has a secure ftp (sftp) or secure http connection protocols? it only lists ftp or http, but not specifying if secure? Thanks.

Can anyone help me answer whether Robohelp has a secure ftp (sftp) or secure http connection protocols? it only lists ftp or http, but not specifying if secure? Thanks.

Hello again
First off, sorry for confusing anyone with the WYSIWYG reference. Failed attempt at humor. Ah, live and learn.
Can you expound on what you mean when you say: But there does seem to be “disagreement” regarding whether RH supports HTTPS?
If you are only referring to this thread, are you sensing "disagreement" because Willam said you can serve content to users?
Here's the deal. I sort of "read between the lines" with your post and made an assumption and it seems I may have needed to ask you to clarify before tossing an answer out. The assumption I made was based on your statement of: it only lists ftp or http
That made me believe you were referring to the Publish section in the Single Source Layout properties. (shown below)
This dialog allows you to specify a protocol used to UPLOAD your generated content to a server.
What Willam was referring to was the END USERS viewing the content AFTER it has been uploaded.
Cheers... Rick

WAAS 4.0 redirection: Only edge redirection for WAFS?

Hello:
I am migrating from WAFS 3.0 to WAAS 4.0, but I am only interested in using WAFS for CIFS traffic (no other application optimizations at the moment).
In version 3 we do not use WCCP service 89 redirection at CORE side (because Edge uses a tunnelled connection through TCP port 4050, directly to the Core). We did not use a ?out-of-band network? for WAEs either.
Is it possible to maintain the same reditrection schema in version 4 (only for CIFS optimization)?
The CIFS optimization is still tunnelled between core and edge?
Is it possible to re-image a WAAS 4 WAE with WAFS 3 software image using recovery CD?(I do not care about loosing configuration)
Thanks in advance.
Gustavo.

Gustavo,
In the current version of WAAS (4.0.1 or 4.0.3) we do not require WCCP at the Core. However, this will change in a future release.
At the Edge, it is required that the WAE is deployed on a separate subnet from the clients, even if you are only using the WAFS functionality.
To answer your last question, you can install WAFS 3.0 or WAAS 4.0 using the recovery CD method.
Zach

How can I allow a user to control my Edge Animation using only the scrollbar?

I have seen a few examples of an Edge Animation being conrolled by the scrollbar, and I am wondering how I could achieve the same effect.
Example:
http://dominikruckli.ch/scrolltest/scrolltest.html
I have searched the corners of the internet and have found 2 or 3 different tutorials, but none of them have proven successful.
In basic terms, I am creating an animation that involves a character getting from Point A to Point B, from the beginning of my timeline to the end.
Rather than exporting my animation so that it plays automatically, by itself, I would like for a user to scroll vertically, and the playing of the animation moves in conjunction with the scroll bar.
As the user scrolls from top to bottom on the scrollbar, the character in my animation moves from Point A to Point B.
Also, if the user stops scrolling... the character will stop moving as well.
In addition, I would like the surrounding area, outside of my stage, to remain hidden. I do not want to allow the user the ability to scroll around and see off of my designated stage area. I only want the scroll bar to act as a playhead for the animation.
Any help will be greatly appreciated.
Thank you
Note:
If you have special CSS (or other form of Code), please provide specific instructions on how to insert this code, where it should be located, what part(s) of the code should be altered, and any additional instructions on how to apply any form of coding. (Screenshots would be amazing)

Never mind. I figured it out myself. I changed the myComp.play("scenefour"); to myComp.getStage().play("scenefour"); and it worked fine.

VJO in not defined & image corrupt or truncated,only in FF & also safe mode but ok in private browsing

VJO not defined & image corrupt or truncated
I am getting this error when the computer renders some websites. It happens with ebay & on youtube. It shows the text but no pictures or background. I am running Windows 7 Home Premium 64bit and Firefox 4.0.1 it also happens in the newest version of FF & in safe mode , I have installed the latest Java runtime with no change ,but interstingly if I turn on "in private browsing" FF runs OK.
I have run Firefox in safe mode, I have uninstalled completely using the APPS own uninstaller & then cleaned up all the files left behind with a 3rd party uninstaller I have updated Firefox to the newest release & rolled back to v4.0.1,I have disabled all addons & AV & malware apps (just for a minute)I have even tried a system restore. Also the "VJO not defined" only happens with FireFox & not with IE.interestingly FireFox runs fine if I enable "in private browsing"

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Sever Session Cache, Read-Only

Since the objects in the server cache are shared, we should not modify the objects in cache. We are thinking of enforcing this in a programmatic way.
Does TopLink have a plan to enhance the current caching capability by allowing user to config the cache to be read-only, read-write, ... thus updates to the read-only cached objects (and possibly their associations) are not allowed? Or is this just too difficult for TopLink to implement?
Thanks a lot for your information.
Haiwei

Doug,
Please excuse my ignorance. But how does setting the flag on the postBuild() descrirptor method prevent anybody from modifying the server session object ?
I presume I have a class that is generic - PeristentObject that has a filed isEditable and I set this flag to false when the object is being built. But how can that help me from not modifying the cached object as I like ? I am free to invoke the setters am I not ?
Regards,
Aswin.
Haiwei,
TopLink has made some great enhancements to caching
and cache coordination in 10.1.3. Take a look at the
10.1.3 preview 3 for more details.
The Server cache's objects are to be considered
read-only. The UnitOfWork provides working copes
where changes are made and these are merged into the
shared cache on write. They are just read only to
prevent direct modification outside of a
transactional context.
I have worked with customers who maintained a flag on
their objects to know if setter should be permitted.
This was set to false (disallowing access) using the
postBuild descriptor event and then set to true
during the postClone method to allow modifications in
the UOW working copies. Its a little intrusive but
more portable then injecting a bunch of proprietary
TopLink code into your model.
Going forward we are looking at some simplification
solutions using AOP to eliminate the visibility of
the UnitOfWork and working copies so all of this is
automated behind the scenes. We hope to also preview
this when its available.
Doug

Read only on ftp connection?

Hello!
I tried to establish an ftp connection to a server to upload some files, but I had only read permissions. My friend told me it worked from windows(very annoying!). Yes, I had a Windows 7 Boot Camp installation and was able to transfer the files from there. However I don´t like the idea of having to downgrade system just to do some ftp. The server filesystem was EXT4 and I also downloaded a separate free FTP client from App Store: Still no write permission!
After all, in Mac OS there is an option connect to server using login name and password then why shouldn´t it just work like OS X is expected to?
Thanks for your replies

I doubt it is the filesystem as the FTP server should be handling file IO.
Try in the Terminal. There are several ways you can connect.
It is basically ftp user@host, but you can type man ftp to see a list of ways to add username and password, port, etc. Once in man, type q to quit.
Once you log in, you'll have an ftp> prompt. Use the ftp commands to "put" or "get" a file, and "ls" to see what is there. The rest of the commands are in the man page.
Basic FTP has pretty much been dropped from OS X as it is completely insecure. However, I'm not sure why a third-party ftp client had trouble. Maybe it was how you logged into the server.

Edge Animation plays only after page refresh in Firefox

There is an issue with animation playback in Firefox (I have the newest version - 27.0) - it works only after page reload or if you go to another page and come back to the home page.
I've saved Edge animation as .oam package and placed into Muse. My animation is floating clouds right above roof on homepage.
When I open html generated by Edge Animate in Firefox it works perfectly at once.
Please help!
I would appreciate any advice.
Thanks!
Here is my site http://www.digidom.kz.

Same FF version here, your page loads fine here, upon first visit and subsequent visits.
Have you tried clearing out browser cache; restart FF then reload/revisit your page.
Darrell

View source shows not only HTML but also external JS and displays it in an unorganized format, how come?

Whenever I use the view source feature, the pane does not only show the HTML, but it also pastes in all Javascripts which are in an external file. On top of that all the indents are gone making it pretty much unreadable.
I have this issue with every single site I try to view the source of. I turned of and uninstalled all add-ons. Started up in safe mode. But nothing seems to work. I had this in firefox 3.6 and upgraded to 4 hoping it would solve it but it doesn't.

If you have the problem in three different browsers, it suggests something "upstream" or shared at the system level, since each has a separate cache and Safari/Chrome use Webkit, not Gecko, as their rendering engine.
Is it possible that all the source views use a font which has become corrupted? In Firefox you could test that theory by changing your Monospace font here:
Edit > Preferences > Content > (Fonts & Colors section) Advanced button
If that doesn't help, do you browse through a proxy server either on your Mac, your network, or out on the internet? Sometimes a security scanner has an embedded proxy server.

WAAS Edge Cache (CIFS only or FTP also?)

Similar Messages

Maybe you are looking for