Waas Expresss need to be supported on 2 Wan Interfaces

Dear Team,
We have 1941 Router on our branch side currently its not supporting to enable the WAAS on our two wan interfaces.
Current Image: 15.1
Planning to upgrade to 15.2
My current IOS is  c1900-universalk9-mz.SPA.151-4.M3.bin and Kindly suggest whether c1900-universalk9-mz.SPA.152-4.M1.bin image will support to enable the waas on 2 wan interfaces?
Thanks in advance
Regards,
Ranjith

Hi,
We can enable Waasfeture on 2 two interfaces in 15.2 3T cisco ios.
Regards,
Ranjith

Similar Messages

  • I have a Macbook Pro. I just purchased Acrobat Pro DC and keep getting an error message when I try to download, saying I need to contact support.

    I have a Macbook Pro. I just purchased Acrobat Pro DC and keep getting an error message when I try to download, saying I need to contact support. I've eliminated previous versions of the application because they were US-based versions and I'm now living in Australia. I checked Flash and it seems to be installed correctly. what am I doing wrong?

    Hi Laura ,
    Could you please elaborate about the issue and also about the error message?
    What does it say except contacting the support?
    Is it something to do with Licensing and Activation of Acrobat DC?
    Also please update us from where are you trying to download Acrobat DC?
    I would recommend you to follow these links download Acrobat DC and see if you still face any challenges .
    If you want to opt for perpetual ,follow this link .
    Download Acrobat products | Standard, Pro | DC, XI, X
    And if you wish to subscribe for Acrobat DC .Kindly refer this link .
    Download Acrobat DC (Continuous) | Enterprise or VIP
    Regards
    Sukrit Dhingra

  • You may need to reinstall supported java virtual machine to load.

    Friends,
    I am getting below message, when i am running PSMPPIAInstall to build the PIA.
    could not find hava virtual machine to load.
    You may need to reinstall supported java virtual machine to load.
    I have downloaded and install jrockit present in PT 8.52 at the location d:\bea\jrocket*
    I can see java -version
    D:\psoft\PT8.52>java -version
    java version "1.6.0_20"
    Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
    Oracle JRockit(R) (build R28.1.0-123-138454-1.6.0_20-20101014-1351-windows-x86_6
    4, compiled mode)
    weblogic is installed correctly.
    kindly guide.

    Datacenter, hmm ...
    I have always installed it on Enterprise or Standard edition without any issues with the software delivered from eDelivery.
    But why use Datacenter, this is more to be used for virtualisations?

  • Urgent:  need to get support for ß, Ö special german characters

    Hi I need to have support for this characters, how can I do this I saw I could do this on the client or directly on the database, the easiest way will be my way so if someone knows how to do this I wait for an answer.

    Hello,
    Why start a new post? I thought I was helping you in:
    How to have dutch nls support in oracle 10g

  • My Adobe application manager is corrupted and I need to contact support! How???

    Adobe application manager is corrupted and I need to contact support! How do I do that. I keep getting sent here???

    I was looking around, because nowwhere before does it mention %temp%\AdobeDownloads\ Based on the error that comes back, I decided to turn on hidden files in Windows (Just type Hidden Files in the searchbox) and go see this AdobeDownloads folder. It is not there. In other threads relating to this issue, they talk about files in the
    C\User\Username\Appdata\Local\AAMUpdater\1.0\ folder.
    One of the logs here gives the following errors:
    05/07/13 21:53:09:554 | [INFO] |  | UPDATER | CORE |  |  |  | 1968 | >>> Adobe Updater Log Begin >>>
    05/07/13 21:53:09:554 | [INFO] |  | UPDATER | CORE |  |  |  | 1968 | UpdaterCoreImpl::InitLogFile : Application Version 7.0.0.63
    05/07/13 21:53:09:554 | [INFO] |  | UPDATER | CORE |  |  |  | 1968 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = C:\Users\guy\AppData\Local\Adobe\AAMUpdater\1.0\aamu.log
    05/07/13 21:53:09:562 | [INFO] |  | UPDATER | CORE |  |  |  | 1968 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
    05/07/13 21:53:09:562 | [INFO] |  | UPDATER | CORE |  |  |  | 1968 | Stepped into << UCInitialize >> call
    05/07/13 21:53:09:562 | [INFO] |  | UPDATER | CORE |  |  |  | 1968 | UCInitialize : AAM is launched via CCM.
    05/07/13 21:53:09:562 | [INFO] |  | UPDATER | CORE |  |  |  | 1968 | Stepped into << UCSetUpdateEnginePath >> call
    05/07/13 21:53:39:599 | [INFO] |  | UPDATER | CORE |  |  |  | 1968 | UCSetUpdateEnginePath : WARNING - Update engine executable signature is not valid = C:\Program Files\Common Files\Adobe\OOBE\PDApp\core\..\CCM\..\UWA\Adobe Application Manager (Updater).exe
    05/07/13 21:53:39:599 | [INFO] |  | UPDATER | CORE |  |  |  | 1968 | Returning from << UCSetUpdateEnginePath >> call error = 26 retVal = 0
    05/07/13 21:53:39:599 | [INFO] |  | UPDATER | CORE |  |  |  | 1968 | UCInitialize: Failed to set update engine path
    05/07/13 21:53:39:599 | [INFO] |  | UPDATER | CORE |  |  |  | 1968 | Returning from << UCInitialize >> call error = 26 retVal = 1
    It is not strange that the AdobeDownloads folder is not there, since the Adobe Application Manager never has a chance to start. This is NOT a notwork error in the classical sense because I am able to download InDesign and all other Updates from Windows, visit every website.
    Don't get me wrong, I fully realize that VM's are not supported. But I can name you 20 consultants who ALL run in a VM. Heck, even I ran this SAME Windows 7 version, with Parallels 7 AND 8, half a year ago, untill I had to start fresh 3 weeks ago. I CAN download InDesign, install it and activiate it with my Creative Cloud account, but I can't update them. The error is above.

  • Can't install iTunes 10 properly. Need Apple Application Support 1.3.2.

    I've downloaded iTunes 10 THREE TIMES NOW and STILL get an error message telling me I need Apple Application Support 1.3.2. I seem to have version 1.3.0.
    I'm on limited (and fairly slow bandwidth and it's expensive to go over my limit, especially if it's only going to fail again... I did select download only so I could install myself behind my firewall and yet still the installation has failed.
    How do I get the Apple Application Support 1.3.2. file only without having to download 100MB's a fourth time please?
    Can anybody point me to just that file alone online please?
    Thanks

    Same problem here. after downloading new itunes, would not install. went to apple instructions and uninstalled all applicable files, but there was not a Apple Application Support file to uninstall. Downloaded itunes again, all went well, showed copying, installing, etc. gave me the screen to open itunes, but then get the message "Apple Application Support was not found. Apple Application Support is required to run Itunes. Please uninstall itunes, then install itunes again." Then "Error 2 (Windows error 2)
    Apparently, i do not have the apple application support program. how do i get this on my windows vista? thank u all for any help

  • HT1918 I'm trying to make a purchase on I-tunes and I keep getting a message saying I need to contact Support.

    I'm trying to purchase an app from I-tunes and keep getting a message that I need to contact support.

    im having the same problem and cant find a way around it

  • Im using iPhone5 and i register in apple store  for my apple ID for the apps, i use my visa then after it appear that i need contact iTunes support to complete this transaction. how many times Ive tried its still the same ....

    im using iPhone5 and i register in apple store  for my apple ID for the apps, i use my visa then after it appear that i need contact iTunes support to complete this transaction. how many times Ive tried its still the same ....

    To Contact iTunes Support...
    Click  >  Here

  • I can't buy games and always said need contact iTunes support . I don't know how do that

    I can't buy games and always said need contact iTunes support . I don't know how do that

    You can contact iTunes Support via this link and ask them why the message is appearing : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I need to buy final cut pro software  and i need it to support arabic writing the problem iam in germany  the  i tune here does not

    i need to buy final cut pro software  and i need it to support arabic writing the problem iam in germany  the  i tune here does not give you chance to choose the
    language

    If you want the menus and dialogues of the app to be in Arabic, that's not possible, there is no Arabic version of this software.
    If you just want to write Arabic language titles, etc., the language of the app is irrelevant, the input of different languages is handled by the OS, and Arabic input is always available.
    All Apple software is multilingual, no matter where you buy it. For example, the user interface for Final Cut Pro can be switched among English, Chinese, French, German, and Japanese.

  • The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

    I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
    The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
    Here is code that illustrates what I am doing:
    DECLARE @MDX varchar(max);
    SET @MDX='
    SELECT
    [Measures].[Extended Service Count]
    } ON COLUMNS,
    NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
    ON ROWS
    FROM (
    SELECT
    {[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
    FROM [MyCube]
    /* Test 1 */
    EXECUTE(@MDX) at SSASLinkedServer;
    /* Test 2 */
    DECLARE @ResultsB TABLE (
    Manufacturer varchar(255)
    , ExtendedServiceCount float
    INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
    Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
    Other articles I've found so far don't seem to apply to my case.  I am not creating any explicit transactions in my code.   When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
    Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
    Any ideas?
    -Tab Alleman

    Hi Tab,
    In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
    http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
    One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
    If you have any feedback on our support, please click
    here.
    Regards,
    Elvis Long
    TechNet Community Support

  • BPE_adapter The process does not support the given synchronous interface

    We are using PI 7.0 Sp 14 .
    Old dev box needed to be upgrade with 64 bit hardware. We did a fresh installation and done all the technical configuraiton. Imported SLD , IR,ID , Runtime value mapping . All scenario working fine after migration except one particular scenari which involves SOAP Web service .
    Our scenario is Extern system send SOAP call to PI  - BPM_SYNC_ASYnc_process --> BPM Proxy_send 
    this BPM proxy_send   to ECC R/eceiver at R/3
    We are getting the following error after migraiton. Please help
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--
    Call Adapter
    -->
    Error! Hyperlink reference not valid. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    <SAP:Category>XIAdapter</SAP:Category>
    <SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
    <SAP:P1 />
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="" />
    <SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
    <SAP:Retry>N</SAP:Retry>
    </SAP:Error>

    Is there any other Configuration to be done at the Abap side part from BPE_XI_customising (Automatic customising) done as part of the post installation steps .
    Wondering any other configuration needs to be done at the ABAP side (as BPE is running on the ABAp stack) to resolve this.
    Thanks

  • Does the sender SOAP adapter support multiple operations per interface

    Hi guys,
    does the sender SOAP adapter support multiple operations per interface? (interface type of 7.1)?
    Thanks,
    Andrzej

    theoretically Yes.
    Do have a look into this when you get time
    /people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype

  • OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface

    Hi All,
    I am trying to execute a stored procedure and store its result in an excel.
    My query to execute stored proc and store sresults in excel
    INSERT INTO
    openrowset('Microsoft.ACE.OLEDB.15.0',
    'Excel 8.0;Database=C:\TC\DataAnalysisFiles\DataAnalysisResult.xls;OLE DB Services=-4','select * from [Sheet1$]')
    EXEC UspUnitTest_Test_CheckDuplicateModelNumberSerialNumber
    I am getting error
    The requested operation could not be performed because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface.
    I have enabled below things by running scripts
    sp_configure 'show advanced options', 1;
    GO
    RECONFIGURE;
    GO
    sp_configure 'Ad Hoc Distributed Queries', 1;
    GO
    RECONFIGURE;
    GO
    EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'AllowInProcess', 1
     GO
     EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'DynamicParameters', 1
     GO
    Please help and let me know if this can be resolved
    Supriya Thigale

    because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the
    required transaction interface.
    Hello,
    When you insert data from SQL Server into a linked server, then a distributed transaction should be started and here it seems this fails.
    See
    Distributed Transactions (Database Engine) for more Details +
    Distributed Queries
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Which Linksys products support Wake-on-WAN?

    Is there any?

    Linksys product doesn't support Wake-on-WAN.To know more about WOW you can refer to this link.

Maybe you are looking for