Waas inline and exchange cluster

Hello,
Somebody can help me ?
I put an WAE574 in inline mode betwen the switch and the wan router.
When i no shut the inline group, the ip virtual address of the exchange cluster is not OK but the two physical address are OK.
The exchange cluster is on the LAN
When I shut the inline group, all it's OK
Thanks for your help
Bibian

Hello,
I finally fix my problem
I configure a static mac address on the router and a static arp.
the mac address is the cluster mac address and the arp is the ip and mac address of the cluster :
mac address-table static 02BF.AC14.00A5 vlan 1 int gig 1/0/24 gig 3/0/23
arp 172.20.0.165 02BF.AC14.00A5 arpa
Regards
Bibian

Similar Messages

  • Exchange 2013 MBX in DAG along with Hyper-V and Failover Cluster

    Hi Guys! I've tried to find out an answer of my question or some kind of solution, but with no luck that's why I am writing here. The case is as follows. I have two powerful server boxes and iSCSI storage and I have to design high availability
    solution, which includes SCOM 2012, SC DPM 2012 and exchange 2013 (two CAS+HUB servers and two MBX servers).
    Let me tell you how I plan to do that and you will correct me if proposed solution is wrong.
    1. On both hosts - add Hyper-V role.
    2. On both hosts - add failover clustering role.
    3. Create 2 VMs through failover cluster manager, VMs will be stored on a iSCSI LUN, the first one VM for SCOM 2012 and the second one for SCDPM 2012. Both VMs will be added as failover resource.
    4. Create 4 VMs - 2 for CAS+HUB role and 2 for MBX role, VMs will be stored on a iSCSI LUN as well.
    5. Create a DAG within the two MBX servers.
    In general, that's all. What I wonder is whether I can use failover clustering to acheive High Availability for 2 VMs and at the same time to create DAG between MBX-servers and NLB between CAS-servers?
    Excuse me for this question, but I am not proficient in this matter.

    Hi,
    As far as I know, it’s supported to create DAG for mailbox server installed in hyper-v server.
    And since load balance has been changed for CAS 2013, it is more worth with DNS round robin instead of NLB. However, you can use NLB in Exchange 2013.
    For more information, you can refer to the following article:
    http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • How to Configure MS Exchange 2007 CCR and SCC Cluster in a single system

    Hi i want to configure ms-exchange 2007 server for both SCC and CCR. i have two Windows Server 2008 on running on my hyper-v. by using cluster on both hyper v i want to install MS-Exchange 2007 for both SCC and CCR. ideally one windows server 2008 has
    Active Nodes and another one has passive nodes. please guide me as i am new in the field

    Duplicate of
    http://social.technet.microsoft.com/Forums/exchange/en-US/edea43a1-59b4-4d26-9b41-76d0f4677095/how-to-configure-ms-exchange-2007-ccr-and-scc-cluster-in-a-single-system?forum=exchangesvrgenerallegacy#c6e08365-c01a-40aa-a8bc-94219757ef13
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

  • WAAS inline deployment options

    Hi,
    Can someone answer this basic question? I cant seem to find that much documentation on the inline modules.
    Can you confirm whether or not devices can see each other on layer 2 across the two groups of an inline WAAS Ethernet module? i.e., if I have a router connected to the WAN of group 1 and another connected to the WAN of group 2, and the two routers are running HSRP (or even an ASA cluster), will they see each other correctly?
    Thanks

    Thanks for that. So if I had
    Group1 = router1 - WAAS inline group1 - LAN switch
    Group 2 = router2 - WAAS inline group2 - LAN switch
    The routers would see each other through the WAAS and then the LAN switches (as if they were just connected to the switches), but wouldn't see each other directly across the WAAS module? Or you mean they don't see each other at all?
    Cheers

  • Upgrading from SBS 2008 and Exchange Server 2007 and Adding Modest Failover Protection

    I haven't seen anyone describe this scenario, so maybe it can't be done, but it seems it should work. Can someone either confirm this is viable or set me straight and tell me it's not wise (and if not, why not).
    I currently have SBS 2008 (2008 Server + Exchange Server 2007 + some other components). I use redirected folders so all my user data is stored primarily on the server, and then sync'd with their local harddrives for roaming use and as an additional
    backup precaution. I want to upgrade to a modern version of Exchange (don't care too much about the underlying server OS, but seems like a good time to upgrade everything). I also want to improve the reliability for rapid recovery in the event of a system
    failure. I have always felt nervous with SBS because it only runs on a single server.
    My plan is:
    Install Windows Server 2012 Standard on a new server machine
    Join that new server to the existing SBS domain and sync the users, etc.
    Install Exchange Server 2013 on the new 2012 Server
    Migrate the existing Exchange data and account info to the new server
    Demote the SBS Server and promote the new server to primary DC
    Reformat the old SBS server and install Windows Server 2012 on it too, and join it to the domain as a second DC
    Set up DFS Replication and keep all my user data folders between the two servers (so if one server fails, the other can take over, just not automatically like with a cluster)
    Install Exchange Server 2013 on the reformatted 2012 Server box (so second instance on the domain) and set it up to sync with the first Exchange Server 2013 via DAG (so if either computer crashes, the other can take over for both Exchange Server and file
    services)
    Wouldn't that give me a complete slow-response failover system without the need for setting up a cluster (I know a cluster would provide instant failover protection, but I don't need that kind of speed - a manual switchover in the rare event of a server
    failure is acceptable for us)? I could do this using cheap hardware for each server, because unless both servers fail at the same time, clients can point to the other server. And because it's not a formal cluster, I don't need to buy anything for a shared
    SAN. This seems like such an obvious more cost-effective solution for a small network, I don't understand why this isn't a common approach, which makes me wonder if there is some reason it won't work.
    Any suggestions or feedback? Are Redirected Folders still recommended for users on a Server 2012-based domain?
    Thanks,
    Colin
    Colin

    Ed, thanks again for your help. OK, so here's my updated plan (I realize I should probably check on some of these pieces on the Server group, instead of this Exchange group).
    Constraints/objectives:
    None of the machines are truly server grade hardware, but only 5 people on the network, so performance is generally not an issue, unless a given server is just pegged on CPU or HD due to its own internal maintenance tasks and can't respond to user requests.
    Haven't seen any problems, since upgrading server from 4GB RAM to 8GB a few years ago.
    Not going to buy any new hardware at this time, but do have several unused consumer-grade computers I can deploy as wimpy or moderate servers.
    Main issue is to limit repair time in the event of a system failure (instant failover is not required, but want to be able to restore network functions within less than 24 hours in the event of a hardware failure) and minimize time spent on IT
    maintenance.
    Because of light IT maintenance (not anyone's primary job and we're too small to justify a dedicated IT person or to pay for outside help), almost every touch takes me research and time to re-learn what I haven't done in weeks, months, or years -- so also
    want to keep all IT tasks as simple as possible.
    We philosophically want to invest now for the next 5 years and avoid ongoing cloud fees (so zero interest in Windows Server Essentials with Exchange Online)
    A little nervous about using VM's, just because I never have before, but I do respect that's probably the right way to do many of these things...
    Currently I have SBS 2008 (Windows Server 2008 R2, Exchange Server 2007, WSUS 3, all with latest SP's, also includes SharePoint and other stuff, but I don't really care about most of it) on a single 8GB consumer grade system, which functions as a file
    server and Exchange server. We use Redirected Folders and Offline files for all users, which works great for us and provides additional file redundancy (if server goes down, all of each user's files are also on their own machine and they can even continue
    to work just fine w/o the server, losing only ability to send and receive e-mail). It has been sufficient, but I want to upgrade our version of Exchange and I am nervous that if that current one server fails, it would take me a long time to restore everything
    from backup, easily many days, especially if I need to buy any replacement hardware. It is RAID1, so a single drive failure is easy to handle, but that's the only hardware redundancy for the current server.
    New Plan:
    Install Windows Server 2012 R2 Standard on a new modest machine (16GBR RAM, Core i7, 1TB RAID1 (may upgrade to 3 or 4 TB), 256 GB SSD boot drive, this had been my old personal computer)
    Join that new server to the existing SBS domain (2008 R2/Exchange 2007), make it a DC, sync the users, etc.
    Install Windows Server 2012 R2 Standard on a wimpy computer (4GB RAM Core i3 processor), leave it as a member server
    Install Exchange Server 2013 on the wimpy new 2012 R2 Server (and nothing else, this will be dedicated to Exchange to make the most of such a wimpy machine)
    Migrate the existing Exchange data from the old SBS Exchange 2007 server and account info to the new server
    (or should I just create new accounts and copy the data from the user end through Outlook -- is that safer and cleaner than attempting any kind of server-level Exchange data migration?)
    Demote the old SBS Server and promote the new 16GB server to primary DC. Now it's OK to take the old SBS server off the network.
    Reformat the old SBS server and install Windows Server 2012 R2 on it too, and join it to the domain as a second DC (and possibly DCPROMO it to be the main server)
    Install Exchange Server 2013 in a VM on the reformatted 2012 R2 Server box (so second instance on the domain for Exchange redundancy) and set it up to sync with the first Exchange Server 2013 via DAG OR set up another physical wimpy member server and install
    it there. In any case, do NOT install Exchange directly on either DC.
    Set up DFS Replication or a Failover Cluster (still need to research this, but I had planned on DFS, thinking Cluster required shared drive, but Ed corrected me on this) between the two DC's for redirected files and keep all my user data folders between
    the two servers. We don't need automatic failover, like with a cluster, a manual switch would be acceptable, but if no additional cost or risk to clustering the two DC's, then the auto-failover protection that provides would be better than DFS.
    I think this incorporates all of your points, Ed. Does this sound right now? What's your advice on #5 (how to best migrate user data)?
    Thanks so much for all your help,
    Colin

  • Exhange 2010 : DAG broken and unrecoverable (cluster deleted)

    Hello,
    We're facing un unrecoverable problem whith Exchange 2010 and a DAG.
    The context : I've been set up a DAG with two nodes : the current, in production, hardwware, machine and an Hyper-V guest (both 2008R2 and Exchange 2010 SP3) for testing purposes.
    Now, I tried to break the DAG, whith the recommended steps :
    1-Remove-DatabaseAvailabilityGroupServer -Identity DAG-CREPS -MailboxServer EXCH2
    2-Remove-DatabaseAvailabilityGroupServer -Identity DAG-CREPS -MailboxServer EXCH1
    3-Remove-DatabaseAvailabilityGroup -Identity DAG-CREPS
    Unfortunately, step two were wrong, but unnoticed, and step 3 distroyed effectiveley the cluster BUT NOT the DAG object.Since now, I'm unable to remount databases even with -Force :
    Mount-Database -force -identity 'creps-idf'
    Impossible de monter la base de données spécifiée. Base de données spécifiée : creps-idf ; code d'erreur : Échec d'une opération Active Manager. Erreur : Une opération Active Manager a rencontré une erreur. Pour que cette opération puisse être
    effectuée, le serveur doit être me
    mbre d'un groupe de disponibilité de base de données ; par ailleurs, ce groupe de disponibilité de base de données doit disposer d'un quorum. Erreur : Le service de cluster n'est pas en cours d'exécution. [Serveur: EXCH1.creps-idf.fr].
        + CategoryInfo          : InvalidOperation: (CREPS-IDF:ADObjectId) [Mount-Database], InvalidOperationException
        + FullyQualifiedErrorId : BF733050,Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase
        + PSComputerName        : EXCH1.creps-idf.fr
    If I ussue a DatabaseAvailabilityGroup command
    Get-DatabaseAvailabilityGroup
    Name             Member Servers                                               
    Operational Servers
    DAG-CREPS        {EXCH1}
    we see the DAG is still present.
    I also tried :
    [PS] C:\Windows\system32>Remove-DatabaseAvailabilityGroupServer -Identity CREPS-DAG -MailboxServer EXCH1 -ConfigurationOnly
    Le groupe de disponibilité de base de données spécifié 'CREPS-DAG' n'existe pas.
        + CategoryInfo          : NotSpecified: (0:Int32) [Remove-DatabaseAvailabilityGroupServer], ManagementObjectNotFoundException
        + FullyQualifiedErrorId : E542AABD,Microsoft.Exchange.Management.SystemConfigurationTasks.RemoveDatabaseAvailabilityGroupServer
        + PSComputerName        : EXCH1.creps-idf.fr
    And finally :
    Get-ClusterNode CREPS-DAG
    Get-ClusterNode : Le service de cluster n'est pas en cours d'exécution. Vérifiez que le service est en cours
    d'exécution sur tous les nouds du cluster.
        Le mappeur de point final n'a plus de point final disponible
    Au caractère Ligne:1 : 1
    + Get-ClusterNode CREPS-DAG
    + ~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Get-ClusterNode], ClusterCmdletException
        + FullyQualifiedErrorId : Get-ClusterNode,Microsoft.FailoverClusters.PowerShell.GetNodeCommand
    In short, the DAG is lying around, the corresponding AD object too, but the cluster is not
    Any advice to fix this emergency problem (all the mail, folders, calendars infrastructure is unrecoverably down) will be greatly appreciated.
    Best regards, and thks in advance
    Xavier

    Hi,
    The cluster should be created automatically when we create a DAG object. But now the cluster no long exists, I would suggest we re-create the DAG.
    Meanwhile, the DAG name should be "DAG-CREPS", right?
    but it seems the command we used:
    Remove-DatabaseAvailabilityGroupServer -Identity CREPS-DAG -MailboxServer EXCH1 -ConfigurationOnly
    we used "CREPS-DAG"? Is this a typo?
    Moreover, could you please check all the database status by running the following cmdlet in EMS and post the output here:
    Get-MailboxDatabase | Get-MailboxDatabaseCopyStatus
    Thanks,

  • Inline and out of path compatibility

    hello
    I need to install 2 x WAAS appliances
    Data Centre  side install is out of path using WCCP V2 for traffic redirect
    the Branch office topology does not support WCCP : I plan to install inline
    Q is this topology supported ?
    thanks

    Hi,
    There is no problem having WCCP on one side of your WAAS setup and Inline on the other as long as both devices are getting all the traffic between those two sites.
    This is a totally supported setup.
    Regards,
    Nicolas

  • SBS Server 2003 and Exchange Server - need to access but only have HDD

    Hi,
    I have been redirected here from a Microsoft Community Forum. I am reasonably conversant with windows systems but am not a computer professional, just trying to see if I can solve a problem without spending a great deal of cash at this stage as
    our office has been completely flooded out and we are still struggling to regroup....Here is the original question.
    A couple of years ago our sever died completely, we kept the HDD's, but unfortunately not the CD's with the software on or the software keys. So I have now 2HDD's, the original boot partition and one with data on. both clean and fully working and
    connected now to an old desktop. I can see everything fine, but I cannot boot from the original boot drive (I have tried simply disconnecting the desktop's boot drive and the windows logo shows for 1 second an d then chucks me back to the initial (DOS?) load.
    The point is that I need to boot into SBS2003 with the exchange server installed in order to access a handful of old emails which have become extremely important, and also to run an old version of Filemaker server which will not run on any newer O.S.
    I have tried, incidentally, a converter for the exchange files and I can see the directories but I think that unless I pay $xxx for something, which I cannot afford now, then I will not get the emails and all attachments back.
    So my question is this - is there anyway I can use the original boot disk in a new hardware environment to restore both sbs 200 and exchange to working condition? I have paid vast sums for both so I do feel that I should be able to use them still!
    Many thanks
    Gor

    Hello
    tip:
    get one pc with hyper-v or VMware. with enough memory.
    install 2003 OS with sp2
    run dcpromo  add same domain name wich is old.
    install exchange 2003  /with same ORG name / and install exch 2003 sp2
    open exch console and Enabling the database to be overwritten on mailbox database
    dismount database, rename database, and copy old database to new and mont database
    run clean mailbox
    create new user without mailbox.
    select disconect mailbox and connect to new user.
    sorry my english

  • Diff b/w netweaver platform and exchange infrastructure.

    Dear SDNers,
    I am new to net weaver.first of all what is the diff b/w netweaver platform and exchange infrastructure.
    i want to learn more about net weaver.if anybody give me the links, i would be grateful to them.
    reward sure...
    Senthil kumar

    Hi
    N/W is a set of new dimensional products that SAP uses for Integration of different Business entities like the "People" ,  "Information"  and "Process"
    XI is part of the Process Integration layer.
    Regards
    krishna

  • Return and Exchange process in CSC

    In CSC Return and Exchange process, While Returning an Item, Refund type is Store Credit. How to change Refund type as credit card?
    Thanks in Advance.

    You can check out the products and services tab on this website - follow the instructions and it will let you if you are still under warranty and also let you know how much apple will charge to replace the battery. Also, check out MacResQ.com and compare prices. I believe I read that Apple Stores will give you a 10% discount for a trade in and there are some online places that will let you trade up also.
    Cheryl

  • Difference between RAC and MySQL Cluster !

    Difference between RAC and MySQL Cluster
    Please write me in well explanation , with examples , needed useful link and all other stuffs.
    (1)Italian dealers/distributors for MySQL
    (2)Difference between RAC and MySQL Cluster
    (3)Pricing about MySQL and PostgreSQL
    (4)How and which type / Way to deliver support by MySQL
    (5)Security features about MySQL Vs Oracle
    (6)Management Console
    MySQL Vs Oracle
    Thanks in advance !
    MySQL Cluster

    Ha ha, most amusing.
    I suggest you try googling for answers to these things. This is a site dedicated to the Oracle database, the questions are answered by volunteers (not Oracle employees) and we are primarily geeks rather than marketing droids. If you have a specific Oracle question please feel free to post anytime.
    Thank you for your interest.
    Arrivederci, APC

  • Payment program and exchange rate

    Hey Gurus,
    When i run the payment program to pay my foreign vendor in foreign currency the system does not calculate the exchange difference at the point of the payment program.
    Example.
    invoice on 9/11 for 4267.50AUD the rate 1.2154 =3511.19usd run the payment program on 9/17 the rate is 1.18840. it pays out 3511.9 instead of 3590.96usd. The difference between the 3511.19 and 3590.96 would be the exchange loss or gain.
    What is missing, or how should the system do it.
    Then when the bank pays the order at the bank rate, the rate in the books and the bank rate are different, therefore different payment amounts, how do you set up the system to reconcile the two and generate another exchange rate.
    Please
    Thank you

    Thank you for your quick response!!
    What if i don't know the banks rate at the time of the payment program, which is what the case is going to be.
    I guess my question is does the payment program calculate the exchange gain or loss when clearing the invoice , if so what settings make it do that?
    And once the clearing is done and i receive the bank statement the two amount would be different due to the different exchange rates, how do i make the bank statement reconcile the two and post and exchange gain or loss.
    Please help this is urgent.
    Thank you

  • Components inline, and other questions

    Hi, is it possible to flow text between components the way it is done with inline images? Also, I have tried creating an external, interactive SWF and including that as an inline image, but although it displays, it does not function correctly. Is this expected - because this funcionality is only supposed to be used for static images?
    Once an image or SWF has been used inline, and the TFT has rendered it between text, is it possible to get the new X/Y position of this image, and if so, how?
    Lastly, is work still ongoing on this tool and when is it planned to be published as a non-beta version?
    Thanks,
    Jim

    Hi,
    Thanks for this.
    You say external interactive SWFs may not work right, what about components like TextFields, and DropDown boxes? I found out how to get those into the TextFlow and all seems to be okay, is this functionality actually supported/good practice?
    We're going to be looking to use this tool in a production environment, are there any future plans to integrate this into the Flash player as standard as a non-beta product we can rely on?
    Thanks for your help,
    Jim

  • IOS 6 and Exchange Calendar Sync Issues

    My company has been having several issues with iOS6 active sync and Exchange 2010 (sp2 ru4 v2).
    Issues:
    1. When an appointment is updated by the organizer the initial appointment does not update on the iOS device. Instead a 2nd appointment is created at the new time causing both appointments to be present.
    2. When an appointment is updated by the organizer the iOS device does not reflect the updated date / time. This seems to happen more than not with recurring events.
    Does anyone know if apple is aware or what the procedure would be for me to open a case with them directlty? All iOS devices are fully updated (to avoid the tansaction log bug that was happening).

    Same issue here Sam, with several users in our organization of about 2500 iPhone and iPad users, mostly iPhone. 
    I have been watching your post for over two weeks now and no one has responded.  Have you learned anything in the interim? 
    Unfortunately I have not, my many searches across the web have yielded no results that are relevant to the problem.
    Ken

  • Consolidating E-Mail, Contacts & Calendars with MobileMe and Exchange

    OK, now that I have upgraded the software on my iPhone and made my ActiveSync connection to Exchange, I am a little confused. My e-mail is syncing between my office Exchange account and my iPhone, but I need to consolidate the Contacts and Calendars. BTW, I also have a MobileMe account.
    When I try to turn on syncing for Contacts and Calendars, I am told that my previous Contacts and Calendars will be deleted. Seems like I don't want to do this. When I look at my e-mail, I can choose to look at either my Mobile Me or my Exchange e-mail. Will I get the same effect with my Contacts and Calendars? Or will they all be consolidated into one? If it's the latter, how can I protect the hundreds of contacts and appointments I already had in my phone before I got to do any of this ActiveSync-ing with Exchange?
    Not sure if that's clear... let me restate... What I need is one set of Contacts and Calendars. If I can't consolidate the Exchange and my current iPhone content into one, it's OK. But if I have to consolidate them, what can I do to protect the items I already have in my iPhone?
    I'm just not getting the concept here....
    Also, I had a dotMac account that is now a MobileMe account. Now my iPhone shows that I have three e-mail addresses (dotMac, MobileMe and Exchange). Can I delete the dotMac account or should I just leave them all in my phone?
    Thanks for any help!!

    Anil,
    Thanks for the information. We do have an OSS message open on this and they have as of yet not recommended any patches. I have also done a search and found nothing. Do you know how I can find that patch or perhaps the OSS note number? We will also update our OSS message.
    Thanks,
    Mike

Maybe you are looking for