WAAS mobile with Vista

Hi All,
when I turn on WAAS client on the windows Vista, the network connection is disconnected but it works with XP like a charm. any suggestion would be very appreciated.
Alex

Thanks for the reply,
I've upgraded to newest version of WAAS mobile and upgrade client as well and problem has been resolved. But still I have another issue, when I run Cisco VPN client with WAAS mobile enable, then I try to access to the web page intranet. I can ping web server IP address, I can access to the web page, but when I enter username and password, it doesn't let me to login. when I turn off WAAS client, I am able to login to intranet web page.
any suggetion?
thanks
Alex

Similar Messages

WAAS mobile with secure access https (not VPN)

Hi all !!! Hope everyone is well !!!
I have a WAAS environment in place we want to deploying WAAS mobile for teleworkers. My question is, can WAAS mobile works for users that use secure access with https (not vpn connexion)
Thanks in advance !!!

Hi Tarik,
First of all, let me insist on the fact the a WAAS mobile client will not interact with a WAAS appliance on the core side and that you'll need to have a WAAS mobile installed there is you want your teleworkers to get the benefit from WAAS.
That said, let me answer your question: WAAS mobile can indeed accelerate HTTPS traffic.
This is described on page 61 of the following document:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas_mobile/v3.5/configuration/administration/g
uide/CiscoWAASMobileAdminGuide_3_5.pdf
Regards,
Nicolas

Windows Mobile and syncing with Vista

I just recently bought a new laptop (within the last week) with Vista as the operating system. I also use Outlook 2007. When I hook my phone up by the usb cable sometimes the computer acknowledges my phone and sometimes not. However, when it does acknowledge it, it does not give me the option to set it up, only an option to sync music, photos and tv. All I want to do is to sync to Outlook.
You can probably tell from my message that I am not very tech savvy but if someone can tell me what to do I can do it! I have read the help menu in Vista backward and forward but still have no idea how to get my phone to sync. Someone please help me before I lose my mind! Is there anything that I have to download to be able to sync? I realize that activesync no longer is needed on Vista but I am unable to tell whether I have to download the Windows Mobility Device Center or if it is already in Vista. I cannot find anything that looks like the WMDC is supposed to look like on my computer and like I said, I am not offered the option of setting up my device.
HELP!!!!!!!!!!!!!!!!!!!!
Post relates to: Treo 700wx (Alltel)

Ok one way to make sure and see if WMDC is install is to go into your control panel and open the programs and features. And look for the windows mobile device center. If it is listed then it is installed if not (which I think is the case) then you would need to go to here to install it http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
once installed you should get the setup option.
Let me know if any of this does not work
Post relates to: Palm Z22

A problem with WAAS mobile client

The customer has a problem with WAAS mobile client. When he disabled WAAS mobile client - all is working, but http is not working.:-( On the server the accelerated networks are configured.The browser send the http request, but the response is not received:-( For other clients it is working. Thank you for help.

I have WAAS mobile server version 3.4.0.1460 on the Windows2003 server with SP1. Client OS is Windows XP. All clients who use WAAS mobile client have WinXP on their notebooks. All clients are on the same network. This client sees this problem when the waas client is active, disabled, and for now when the waas mobile client is uninstalled - it seems like waas mobile client changed registers for IE or FireFox - so all http answers are redirected to nonexisting waas mobile client:-(
Thank you
Roman

Issue Uninstalling WAAS Mobile Client on Windows 7

I upgraded my laptop in hopes that issues pertaining to Vista would be resolved. Those issues remained, but was going to try to uninstall and reinstall under Windows 7 and check this for grins. I have tried to uninstall and get this error -
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Cisco WAAS Mobile was interrupted before the installation/uninstallation of your software was fully completed. You can rerun this wizard at another time to complete the setup of this software. (1722)
I've tried rebooting, but get the same error.
Any suggestions?

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
The quickest solution might be to try to reinstall followed by another uninstall, or to use the Windows Install Cleanup Utility, (although Microsoft has removed it from their support site with the following disclaimer).
Notice
This article previously contained a link to the Windows Installer Cleanup utility (MSICUU2.exe). If you were directed to this article to solve a problem installing a product other than Microsoft Office, please contact your software manufacturer for installation support on the product.
While the Windows Installer Cleanup utility resolved some installation problems, it sometimes damaged other components installed on the computer. Because of this, the tool has been removed from the Microsoft Download Center.
Nonetheless, here is an active link and basic instructions:
http://majorgeeks.com/download.php?det=4459
1.     To use the Windows CleanUp utility, follow these steps:
a.     Click Start, point to Programs, and then click Windows Install Clean Up.
b.     Select the program that you want to remove, and then click Remove.
c.     Click OK, and then click Exit.
If these suggestions do not help, then perhaps a case should be opended with TAC and they could assist with gathering the installer log files.
-ken

WAAS Mobile & Windows 7

Hi All,
I was told on this board that a new version of the WAAS Mobile client would be released in the first week of April '10. New version would be compatible with Vista & Win7 both 32 & 64 bit versions.
I cant find the original thread to follow up so am posting anew.
Dont see anything in the download area. Wondering if anyone knows anything about this version - it's holding up a large project we are almost done with.
The chap from Cisco that responded was, I think, Ken - as I say, cant find the original post..
thanks!
Iain

The WAAS Mobile 3.5 release is in its final stages and is targeted for release by the end of April (this week!).

Windows 8 compatibility and WAAS Mobile.

Hi, everyone,
I have undertaken the possibly mad quest of getting WAAS Mobile working on Windows 8. I am currently receiving the error "TDI driver failed to initialize." Does anyone have any insight into that issue?
Thanks,
Tom

Holly,
Not news about it yet. You may discuss it with your Cisco Account team for additional details or requests.
Jorge
Mark it if used, the other customer can use it as reference in the future.

Connection problems with Vista

I have problem using my Nokia 5320 as modem with Vista (with TIM as mobile provider).
The connection, very often, is lost. Even if the symbol "3.5G" is still on the phone, Vista looses
the internet connection.
Someone says that is a Vista DHCP problem for mobile connection.
Could you, please, help suggesting some solutions?
Thanks and regards

Hi All,
I have checked again and the IP remains set when the internet is lost. (USB connection, no globe icon on the network monitor status) However the system handles the connection in strange way with DHCP for sure. I do not really familiar with it, so it could be normal as well.
I realized the communication loss is related to the baud rate change (increase) of the USB modem under the internet connection period (depends on the throughput of the actual 3G, 3.5G connections). I tried to set various details, parameters under modem settings but without any real success. It looks like the OS cannot really handle the HSDPA modem in the phone. Does not really know the exact working parameters of it.
Maybe I am wrong, I only guessing and trying to solve the issue, because it should work smoothly as works under Linux.
Any idea from an expert?

J6450 dropping wireless connection with Vista

OMG!
I purchased an HP touchsmart desktop with Vista and an HPJ6450 All in one printer hoping that having all HP would solve a lot of compatibility issues.
Well that stupid printer seemed to have a mind of it's own as to when it was connected. REALLY ANNOYING!
I scoured the net looking for the answer and apparently I was not the only one to have the issue.
I think I found the answer and I'm all but 100% sure this is it.
Vista power settings!
Yes!
Vista apparently defaults wireless adaptors to use as little power as possible so it shuts them off whenever possible...like when you enter standby...or don't use it for awhile etc.
To prove it, I knew if I shut Vista down I would lose my connection
So I chose the "Low power setting", shut down and restarted, checked my connection and it was GOOD.
I tried it a couple times, switching it back and forth and that was it!!!
So here's what to do:
Start menu > Control panel > Power options > Recommended settings > Change plan settings > Change advanced power settings > Wireless adaptor settings > Power setting mode > Setting > Select "Low power saving".
Update: 24 hrs later still no connection issues. Comes out of standby with immediate connection, on reboot or restart it appears to be the last thing to connect so it might take a minute or two.
Bonus tip: I think this also stopped the stupid "Host processor error" from popping up, because I haven't seen it since I did this.

Hi mvoltage
Do you have any appliances with motors or other mobil telephone devices setup near the iMac?
Both motor flux fields and Cordless Phone Base Stations can and will interfere with the operation of the iMac's wifi and airport signals.
Dennis

WAAS Mobile Server Time/Date incorrect

Hi,
I cannot seem to find where I configured the time/date settings for the WAAS mobile server.
The Win 2008 server that the Mobile server is installed on has the right time, but the WAAS mobile server itself does not.
At the moment it is using GMT.
Can anyone help?
Thanks

Where do you see this GMT timestamp? It may be by design.
Cisco WAAS Mobile Administration Guide
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas_mobile/v3.5/configuration/administration/guide/CiscoWAASMobileAdminGuide_3_5.pdf
page 56
datetime is the timestamp when the system report was generated. Datetime is expressed in GMT (Greenwich Mean Time), and is formatted as yyyy-mmddThhmmss.
Thank You,
Dan Laden
Need assistance with planning, designing, or implementation? PDI may be able to assist.
http://www.cisco.com/go/pdihelpdesk

Could any expert in WAAS Mobile see this question?

Hi everybody!
I succesfully installed WAAS Mobile in a customer. Everything worked fine with WAAS, except for a particular application. WAAS Mobile is not working with a particular client/server Application. When WAAS Client is running, the Application Client is not able to connect to the Application Server.
Analyzing the packets capture with Wireshark, I observed that the first 3 packets are not being redirected to the WAAS Mobile Server. It is going straight to the Application Server.
At first I thought that I needed to add another process to the Proxied Process list in WAAS. But using the TCPView software I can see that the process that is sending the first packets is the one that I already added to the Proxied Process list.
The question is: Is it normal for these first packets not passing through WAAS Mobile Server? Or all the packets of the process should be redirected to the WAAS Mobile Server? Could this problem be a bug? What is the best way to troubleshoot this?
Thanks!
Marcio

First of all, individual packets are not passed thru to the WAAS Mobile Server. All TCP connections for accelerated applications are terminated on the client. The packet content is encapsulated and passed to the WAAS Mobile Server using a UDP connection on port 1182. The fact that you saw packets going to the application server means that the applicaiton in question is not being optimized for whatever reason. To determine the reason, please generate a client and server System Report directly after exercising the problem application with WAAS Mobile. Either open a TAC case for the issue or send the system reports to the Cisco SE assigned to your account. The system reports can then be analyzed to determine why the application is being bypassed.

Ipod touch and itunes not working with vista?

I bought a 32gb ipod touch(2nd gen) today and so far it's been nothing but a massive headache for hours. I've had an ipod video(30gb) for three years now and it's always been perfect, hasn't give me an ounce of trouble.
I get home, checked that I had the current itunes version, and then plugged in my ipod touch. I immediately got an itunes error saying that the apple mobile support device was out of date, and I had to re-install itunes. I did that but it still didn't work, it wouldn't recognize my ipod touch. I deleted all my itunes and apple folders and restarted(and uninstalled). Now my ipod still won't recognize when i plug it in on my desktop, it gives me an intunes error saying something like " your ipod touch cannot work because you dont have the 64bit version blah blah ". Which is ridiculous because I'm on windows vista 64bit, and the version of itunes I got was the 64 bit, i checked it three times and even re-downloaded/installed it.
I tried my second desktop which is on windows XP and it wouldn't recognize my ipod touch either. Then finally I took out my laptop which is windows XP, and plugged in my ipod touch. My ipod touch works fine on my laptop, but not on my other two desktops.
I need for it to work on my main desktop(the one with vista) because it has all my music.
So any ideas as to why this is happening? and how to fix it.

Hi,
What is the name of the iTunes installer file you used? Try downloading and installing the iTunes again from the iTunes64Setup.exe file located here: http://support.apple.com/downloads/iTunes8_1_1_for_Windows__64_bit
If the issue persists, verify the usbaapl64.sys driver is being used by following the steps under *Verify iPhone Driver/Service Installation* in this article: http://support.apple.com/kb/TS1495
If the issue is not resolved after installing iTunes from the iTunes64Setup.exe file and the correct driver is being used, reconfigure or disable the security software on the PC and reinstall iTunes.
-Jason

W500: using the switchable graphics with vista ultimate without the power manager software?

seriously, invest in a new hitachi travelstar 320gb for 49 bucks from that tiger place online and a usb hard drive caddy, pop in your free clonezilla cd and your rescue and recovery problems will be over!
after reading all the problems with that software i figured my data was too valuble to get caught in that mess so for under 75 bucks problem solved and i rid my w500 of that bloatware. even cheaper then ordering the recovery disks from lenovo.
working on getting rid of the rest of the useless software now.
hey question, how do you use the switchable graphics on the w500 with vista ultimate without the power manager software? if you can thats next!!
Moderator note: Question added to subject line for clarity.
Message Edited by Agotthelf on 28-04-2009 08:45 AM

That's because you are asking a T500/W500 question in the Thinkvantage forum. Anyway, the answer to your question is in this thread.
ATI recently started packaging their switchable graphics driver together with their regular Catalyst. So downloading their latest driver Catalyst 9.4 from the ATI/AMD site and then modifying it with the Mobility Modder will allow you to use switchable graphics without the power manager. The little problem is just that the released version of the Mobility Modder stopped working with Catalyst 9.2 and you are on your own getting a modified Modder working on 9.4, see here.
So I decided not to make more work for myself staying on a modded Catalyst 9.1 and for the time being living without switchable graphics.
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

WAAS Mobile - Client install on a biometric enabled laptop

WAAS Mobile 3.4 client fails to install on a laptop with fingerprint authentication with the message relation to "incompatible ÑÐ¸Ð»Ðµ". ÐÐµÑÐ°Ð»Ñ Ð°s follows:
Authentication Manager
BIOLSP.DLL
Version 1.4.0.99
Any ideas how to sort this out?
Thanks
DG

Please park this question for now. The installation problem was resolved by upgrading the Wave Systems Dell Embassy trust suite to ver.V2.0.0.39.
The problem we have now is with the client failing UDP connection test. I will investigate further, unless it is a 'known' problem and someone knows a solution.
Thanks
DG

WAAS Mobile 3.4 - Cannot Uninstall

One user has a windows 7 laptop and the uninstall process errors out. Have tried uninstalling from both the programs and from the icon for program uninstall.
Any suggestions?
We upgraded to 3.5 too - and the auto upgrade won't work either - a message came up that we have to manually uninstall the client first.

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
1 - How is this performed?
A driver on the WAAS Mobile Server initiates TCP connections to the application and content server using the user’s source IP.
2 - Does the waas mobile needs to be inline?
We do not recommend deploying WAAS Mobile inline. When the source IP transparency option is selected, the WAAS Mobile server should be deployed in conjunction with a Layer 4 switch such as a Cisco ACE with mac-sticky capability that redirects traffic back to the WAAS Mobile server. The Layer 4 switch could be inline.
3 - Does it send the packets with the source ip on the header or use another option on the header?
Yes, the user’s source IP is in the header.
4 - How is the mobile server located on the topology? See response above.
5 - How can we add redundancy if the waas mobile is inline? Multiple WAAS Mobile servers may be deployed using ACE server load balancing to provide redundancy.
6 - Can the waas mobile server use the fail-to-wire feature? WAAS Mobile servers are not recommended to be deployed inline.

WAAS mobile with Vista

Similar Messages

Maybe you are looking for