WAAS PREPOSITIONING DELAY 17 HOURS

I am using WAAS inline infrastructure ( 1 Central Manager and 2 Application 612 ) Inline method with SERVER prepostioning . When I try to schedule the push of proposition in the GUI TAB > CONFIGURE PREPOSITIONING > PREPOSITION STATUS the conter say me that is in Porgress and is take 17 hour to make a prepostion of 10 Mb file !
Is it normal ? Or I do something wrong ?

What is the WAN link b/w and latency you have on that link? What type of file is it (pre-compressed or encrypted or plain text etc)? Just for troubleshooting purpose have you tried transfering that file over that WAN link using regular file transfer using FTP or Windows drag & drop (CIFS based). If so, how long does it take?
Btw, just curious, what version of code you are running on the WAEs and Central manager?

Similar Messages

  • When sending a text to another iphone it sends it twice and the reply comes delayed, sometimes hours later. How can I fix this?

    When sending a text to another iphone it sends it twice and the reply comes delayed, sometimes hours later. How can I fix this?

    That usually means that the recipient is in a bad wifi or cellular data signal area.

  • Receive email delay one hour using Mac Mail client (Mountain Lion) connect Exchange Server 2010

    Hi all,
    My boss use iPhone, iPad, MacBook Air (Mac Mail client), MacPro (Mac Mail client) connect Exchange Serve 2010 to receive emails. All clients are okay except MacBook Air, the Mac Mail client cannot receive the latest emails from Exchange Server, but it can receive (sync) the emails after one hour. The other clients can receive the latest email after Exchange Server receive new emails immediately.
    In this period, the MacBook Air can receive the other IMAP, POP3 and webmail from ISP normally. I tried to set 5 mins to check emails or manual check email from Exchange Server. However, the latest email still delay one hour.......... .
    I dumped a screenshot for Mac Mail setting for Exchange Server and a Log file.
    could anyone help me to solve this issue?
    Thanks

    I am not sure what the user has the check for new messages set for but mail does arrive as short as 2 minutes.  It does however arrive on his iphone immediately first.

  • Print delay 1 hour : itcpo-tdsenddate

    We have just upgraded from 4.0B to ERP2005.
    We are printing some EAN128 labels on a barcode printer.
    The printer is placed in UK, and the user has UK timezone in his profile.
    Our SAP system (both DB  and all application server) is placed in Denmark.
    When users in the UK prints, the print is delays 1 hour. In SP01 the print is created, but get the status "Scheduled".
    When calling the SAP script we pass the following paramters in the ITCPO structure :
      l_itcpo-tddest       = zconfig-labeldev.
      l_itcpo-tdimmed      = 'X'.
      l_itcpo-tdnewid      = 'X'.
      l_itcpo-tddelete     = ' '.
      l_itcpo-tdcopies     = '1'.
      l_itcpo-tdlifetime   = '1'.
      l_itcpo-tdprogram    = sy-repid.
      l_itcpo-tdsenddate   = sy-datum.
      l_itcpo-tdsendtime   = sy-uzeit.
    I Can't se why the print from UK should not be printed immidiate - we use sy-uzint not sy-timlo
    Regards,
    Kim

    Hi Kim,
    I guess the system behaves as it should: your sy-datum is the server time and it differs 1 hour with GMT. So if you print at 12.00 server time (11.00 GMT), the print will come out at 12.00 GMT (that's 13.00 server time).
    Possible solution: get the difference between user and server time.
    Maybe it's also not necessary to fill the tsenddate. If it's not mandatory, just try to leave it  blank.
    Cheers,
    Stefan.

  • WAAS Prepositioning Questions

    I have WAAS setup and i'm able to view the cifs shares but when i configure a preposition directive the status says it copied and is successful but 0 bytes have been copied.
    The file servers sits at the same location as the core cluster and i've assigned the edge devices to do the caching. The status is below. The cifs directory i'm trying to preposition has about 50 mbs of data.
    Is that normal or are there some additional tests i can run to verify the config?
    wae-gresham Thu May 22 13:31:20 MST 2008 1.66655 [min] 0.0 [bytes] Completed Finished successfully

    Darren,
    Ensure your username has at least read-only permissions for the directory and file listing on your directories.
    Do you know if the files that you are attempting to preposition are already cached locally? Is the edge currently serving CIFS content from the cache successfully?
    Also, I would check the following settings:
    Total Size as % of Cache Volume: Ensure that the cache % is large enough for your files.
    Max/Min File Size: Set to value so your files are covered.
    Duration: Set to several hours as a test...
    Type: Try "All Files"
    Include Sub Directory: Check the box unless you don't want to traverse the directories.
    If that all checks out and the files are still not prepositioned, we can look at the logs as well (both WAE and Origin Server).
    Thanks,
    Dan

  • Cisco WAAS Prepositioning 0.0 bytes Copied........ :-(

    Good Evening All,
    I am having my first attempt of using the prepositioning function within Cisco WAAS running version 4.1.7a and its not going very well at all.........:-(
    We are trying to test a preposition of Microsoft Updates to a selection of Branch WAE devices but the "Amount Copied" is constantly sat on 0.0 bytes and never changes.
    Clearly i am doing something wrong and im hoping someone can advise, basically i create the Preposition task via the CM (also running 4.1.7a), i see the root folder i need (which has further subfolders benieth it) and select the folder, i submit this and it takes this with no problem, i assign the branch WAE's to this and its also submitted and accepted, i select schedule for "Now" and the preposition appears in the statuc tab however no matter how many hours its left it constantly sits at 0.0 Bytes - Clear something is wrong.
    Doing a "Sh run" on the branch WAE it sees the preposition task at the end of the config but still nothing. I am assuming this is down to the fact that the Data Centre WAE is not loading the files in the "staging" area, the Data Centre WAE has flows for the chosen Server when you do a "sh stat con" and can ping the server by name and ip address.
    Im at a lost of what to check next, we are not running the "legacy" WAFS as we first started running 4.1.3b and recently upgraded to 4.1.7a.
    Can anyone help......??
    Thanks in advance
    Craig

    Hi Mike,
    Thanks for your quick reply on this, i have a feeling you may have hit the nail on the head already with your first comment...... Doh.
    Ill give you an example of how the branch site is setup:-
    e.g. (not actual addressing used but gives you the idea)
    Branch Site
    int vlan 10
    ip address 10.10.10.1 255.255.255.192
    ip wccp 61 redirect in
    int vlan 11
    ip address 10.10.10.65 255.255.255.192
    ip wccp 61 redirect in
    int fa0/1
    description *** BRANCH WAE WAAS Device ***
    ip address 1.1.1.5 255.255.255.248
    Int se0/1/0
    172.1.1.1 255.255.255.252
    ip wccp 62 redirect in
    ip wccp 61 redirect-list 161
    ip wccp 62 redirect-list 162
    access-list 161 permit tcp 10.10.10.0 0.0.0.127 192.168.1.0 0.0.0.255
    access-list 162 permit tcp 192.168.1.0 0.0.0.255 10.10.10.0 0.0.0.127
    Data centre end:-
    This access-list is then replicated but in data centre but with the access-list 161 & 162 swapped - the 192.168.1.0 subnet is acting as the Data Centre server subnets.
    In the data centre the WAE will have an address of say 172.21.1.5 255.255.255.248.
    Is there any risk/implication of including the ip address ranges of the WAE devices themselves? currently we dont do this on any site where we have a WAE device and we are seeing great benefits still but i guess this will explain why the prepositioning is not working as the devices are not matching the ACL and therefore being denied redirection.
    Cheers
    Craig

  • Yahoo.verizon sent e-mail delayed for hours before being delivered. HELP!

    I have been using Entourage, on my Mac, as my mail application for years without a problem. During the past week I started to notice that my e-mails were not being answered. Upon further investigation I learned that my e-mails were not being delivered until several hours after I had sent them. This afternoon I sent a dozen e-mails to myself and everyone took nearly five hours to be delivered to me.
    My verizon mail service is yahoo.verizon. I have checked all of my settings and they are correct. My outgoing SMPT server is outgoing.yahoo.verizon.net and set to port 587. When sending an e-mail with Entourage the e-mail are sent without a hitch. They simply aren't being delivered by yahoo.verizon for hours later. They apparently arrive at yahoo.verizon and then get trapped there for hours!
    What is causing my e-mails to be delayed? Is it a Verizon issue? A Yahoo.verizon issue? It does not appear to be an Entourage issue as I've not changed any of my settings. 
    IF I send an e-mail using yahoo.verizon on my web browser, the e-mail is delivered almost immediately.
    I would contact verizon by phone if I could speak with someone in the U.S.A. that could help me, but I don't have three hours to be on the phone with someone overseas.
    Can anyone help me with this problem???? 

    Was contacted this morning by a nice gent from the Verizon Operation Support Center (OSC).  As of yesterday, this is now a known issue.  Verizon learned in discussion with Yahoo yesterday that they are working on email servers to swtich to a new webmail format.  They did not believe that their work would cause any disruption in service, but oviously it is.  Unfortunately, no committment as to when this issue will be resolved.  I don't expect Yahoo to slack off on a committment for resolution.  There is an option to have Verizon switch from Yahoo email support of your Verizon.net email account back to Verizon email servers.  You can contact tech support to do this.  I am going to hang in there for another week in hopes that this issue goes away.  I like the ability to use Yahoo's webmail to read both my Verizon and Yahoo email accounts.

  • Incoming mail delayed one hour

    Hello all,
    Since day one of running ML Server, some mail from outside the LAN is always delayed exactly one hour before it gets delivered. Ironically it's always mail from Apple. Mail from anywhere else never has a problem. Any thoughts on what this might be...?
    Thanks!

    This sounds like grey listing?
    See this thread for how to disable:
    https://discussions.apple.com/thread/4144298?start=0&tstart=0
    Although, disabling may be a little severe. There should be info somewhere on here about white listing domains too.
    Steve

  • WAAS Preposition test results

    I created and prepositioned approximately a 725Mb share. The preposition status reports that the directive took 15 minutes to complete. We then connected to a PC at the remote location and mapped to the share here at corporate. We then copied the files from this share to the desktop and it took about 2 minutes. We then copied these same files from a second non-prepositioned share and the transfer time was about 2-3 minutes. I would have expected the second copy from the non-prepositioned share to be longer. I am taking these results to be that the DRE and CIFS cache are both populated because of the prepositioning. Is this a valid test to compare prepositioning -vs- non-prepositioning? Tonight I am going to update the prepositioing and see what it's reduced time will be with modified copies of the original files. We will then see what the copy results will be tomorrow.
    We are trying to establish a base line and extrapolate times and things before we attempt an 80Gb prepositioning. Is there a different approach we should be taking for this test? Do these results seem about normal?
    Brent

    Brent,
    How fast is the copy without WAAS?
    Start with the basics... Check the speed and duplex on your interfaces and ensure that you don't have any errors or drops. Also, is the File Server using SMB Signing? If it is, then CIFS copies won't use the CIFS AO. You can see the connection as you are copying and can tell if you are using the AO or not via the CLI or the CM GUI. If it's using basic optimization, it's not using the CIFS AO, and thus not using your prepositioning.
    I would check and see that you inserted content into the cache via prepositioning (look and see that the disk size increased). Also, validate that the files copied from the server 2nd and 3rd time are either faster or the same.
    DRE would have definitely been populated when you did the first prepositioning and/or copy. So the 2nd server copy would have used that for the same files, however the CIFS cache would not have been used. Try clearing the DRE cache and copying from the 2nd server again, that should be MUCH longer.
    Hope that gives you some ideas to start with.
    Dan

  • MSN hotmail delivery delayed 4 hours

    I setup a Hotmail account on a Curve using the built-in Email setup application. I did not set up the BIS online. I then performed an Enterprise Activation with BES. The user now complains that email delivery to the Hotmail account is delayed approx. 4 hours. Is this a normal delay?

    Definitely not!! In normal scenario it should not take more then 20 minutes! If your device OS is 4.5 and carrier is upgraded to 2.5 then this delivery time should be near real time!! Did you try by deleting the mail ID and reintegrating it?
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Fetching of attached files delayed, minutes-hours in Outlook 2011 for Mac from Exchange online

    Hi,
    I have an annoying problem I would be grateful if someone could solve.
    I run Outlook 2011 for Mac which is synced towards Microsoft Exchange online. Everything works well except when there are attached files in incoming emails.  Sometimes it can take up to hours before an attached file is available (the email as such is
    available immediately), however luckily it is mostly done within 5-10 minutes. Meanwhile the notification bar switch between "Awaiting synchronisation for this folder" and "Fetching attached files...". There is no actual difference between
    larger and smaller files and there is also no problem sending emails with attached files, they are sent immediately.
    I have tested in different locations with good connections to rule out unstable internet connection without success.
    Thanks for any help with this issue!

    Hi,
    Since this is the forum supporting Office for Windows, if you want to receive more information about Office 2011, I recommend you post this problem in Office for Mac forum:
    http://answers.microsoft.com/en-us/mac
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners
    who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • WAAS Prepositioning and File Share Access

    We have WAAS solution in place with HQ based in UK and remote offices globally. One of our sites in Singapore is experiencing slow performance when opening files. From the WCM I can the cache was set to just 5% and I have increased that now to 25% based on some other threads.
    How can one verify which files are being cached locally on the WAE, this is my qtn?
    any other fine tuning advice would be appreciated. I accept our WAE's could do with a code upgrade.
    NME-WAE-502-K9  running ver 4.1.3
    thanks
    anawaz

    Hi,
    Have try this URL for troubleshoot?
    http://docwiki.cisco.com/wiki/Cisco_WAAS_Troubleshooting_Guide_for_Release_4.1.3_and_Later_--_Troubleshooting_Application_Acceleration#CIFS_Accelerator
    Jan

  • WAAS prepositioning before moving a server

    I have a server out on a remote site with a WAFS edge enabled WAE NM in that remote router. I also have a WAFS core endabled WAE in the network core. I would like to preposition files to the edge WAE before I move the server into the core if possible. When I run the preposition jobs it looks like the edge WAE detects a possible network loop and the preposition task fails after about 30 minutes. Either way it looks like the file (probably compressed and optimised via DRE) is copied over the WAN anyway. Is there an easy and efficient way to preposition files from a server to a WAE in that same site before you shift the server to the network core?
    Thanks in advance,
    Peter

    Zach,
    The NMEs are NME-WAE-502-K9 having a gig of memory. I believe this means they can't be a WAFS core (if that is what you were getting at). The log I am looking at is the WAFS Edge log in the web gui for the WAE. The log entries are similar to this:
    2008-06-02 17:00:01,871 INFO Preposition ID 28155 started on \\myserver.domain.internal\APPS\.
    2008-06-02 17:04:41,475 ERROR Possible routing loop detected: CoreFE 192.168.1.1 tries to connect to server 192.168.2.2.
    2008-06-02 17:11:13,943 WARN Host 192.168.2.2:139 was not discovered, bypass period: 0 sec, number of events: 1, reason: possible routing loop
    2008-06-02 17:12:17,726 ERROR Possible routing loop detected: CoreFE 192.168.1.1 tries to connect to server 192.168.2.2.
    2008-06-02 17:13:27,150 WARN Host 192.168.2.2:139 was not discovered, bypass period: 0 sec, number of events: 1, reason: possible routing loop
    2008-06-02 17:14:08,972 ERROR Possible routing loop detected: CoreFE 192.168.1.1 tries to connect to server 192.168.2.2.
    2008-06-02 17:14:54,772 WARN Host 192.168.2.2:139 was not discovered, bypass period: 0 sec, number of events: 1, reason: possible routing loop
    2008-06-02 17:15:40,363 ERROR Possible routing loop detected: CoreFE 192.168.1.1 tries to connect to server 192.168.2.2.
    2008-06-02 17:17:11,796 WARN Host 192.168.2.2:139 was not discovered, bypass period: 0 sec, number of events: 1, reason: possible routing loop

  • When synchronize, the hour delayed...

    When connecting my IPad 1 (IOS 4.3.5) with my Macbook (OX s 10.5.8) by USB, in IPad the hour delayed one hour. And when I sync ICal using ITunes (latest version), the events are copied at different time on both devices. For example, if the event in IPad is at 3:00 in MacBook appears at 4:00. In both devices the support zone is turned off. Thanks
    Cuando conecto mi IPad 1 (IOS 4.3.5) con mi Macbook (OS x 10.5.8) via USB, el IPad se atrasa una hora. Y cuando sincronizo ICal con ITunes (ultima version) los eventos se copian en diferente horarios en ambos dispositivos. Por ejemplo, si un evento en IPad es a las 3:00 en Macbook figura a las 4:00. Ambos dispositivos estan configurados SIN SOPORTE ZONA HORARIA. Gracias

    Hi,
    Can anyone help me out? Thanks.
    Martin

  • Problem during preposition

    I have a preposition of a large content (about 50 GB) that starts correctly, but after some time it stopped with errors and without finishing. Last night it only transfered 7 GB.
    In the Edge WAE I see hundreds (or thousands) of errors with many files:
    2011 Jan 24 23:38:33 esplpawae806 java: %WAAS-CIFSAO-4-131238: (221487) Error during preposition of \\Logs\ESPLPAS328658_actualizacion_SDE.log, reason: File Version Mismatch (CoreServer).
    The last message of the preposition (after four hours) is:
    2011 Jan 24 23:38:33 esplpawae806 java: %WAAS-CIFSAO-4-131233: (276821) Only the change time attrbiute has changed for 1,428 file out of 1,449 files that where changed. It can be that some backup (or other) application is scanning and changing the attributes of the files.  
    Why the preposition is not finishing? What is the meaning of File Version Mismatch?
    Regards, Fernando

    Hi Fernando,
    The key here is the second message. Apparently, while the file is being copied to the edge WAE, someone is accessing the file in the origin server and changing the "Change time" attribute. Since the change time attribute is changed, WAAS believes that the file has been modified while it was being transferred and as a result, the prepositioning process fails.
    When prepositioning a file, you should make sure that the file cannot be modified while it's being transferred. You should be able to ensure this by removing write permissions to the file.
    I hope this helps
    Daniel

Maybe you are looking for