WAAS problem with DISK

Dear,
My WAAS have a issue I will apreciate your help .
When I switch on my WAAS show the next messages:
Cisco Wide Area Application Services Software (WAAS)
Copyright (c) 1999-2010 by Cisco Systems, Inc.
Cisco Wide Area Application Services Software Release 4.2.3 (build b7 Jul 29 2010)
INIT: Entering runlevel: 3
Node Health Manager started...
Nodemgr started!
2011 Jun 7 14:58:30 (none) kernel: %WAAS-SYS-3-900000: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
2011 Jun 7 14:58:30 (none) kernel: %WAAS-SYS-3-900000: sd 2:0:0:0: [sdb] Assuming drive cache: write through
2011 Jun 7 14:58:30 (none) kernel: %WAAS-SYS-3-900000: sd 2:0:0:0: [sdb] Assuming drive cache: write through
2011 Jun 7 14:58:30 (none) kernel: %WAAS-SYS-3-900000: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
BOOT-100: disk apply
/ruby/bin/ruby_disk: First disk is missing, bad, marked bad, disabled via shutdown, or it has unknown data.
/ruby/bin/ruby_disk: Second disk is bad, missing, or shutdown; bailing out
ssmgr: open(/state/safestate, O_WRONLY|O_CREAT) failed: No such file or directory
ssmgr: op_open or media_open
IQ¥ failed: No such file or directoryñ=}
ssmgr: open(/state/safestate, O_WRONLY|O_CREAT) failed: No such file or directory
ssmgr: op_create or media_init
SSMGR RETURNING: 10 (No such file or directory)
2011 Jun 7 14:58:33 (none) memconfig: %WAAS-NODEMGR-3-330106: Memconfig: Cannot open /state/dre-diskspace file, errno: 2
2011 Jun 7 14:58:33 (none) memconfig: %WAAS-NODEMGR-3-330109: Memconfig: disk space allocated to DRE is 0, assuming DRE memory allocation of 100MB
One or more system software partitions are not mounted.
Check if disk00 is bad.
Initializing kernel random number generator...
/ruby/bin/ruby_startup_pre200.sh : Start KDUMP functionality...
Starting kdump failed.
/sw or /swstore doesn't exist! Won't turn on swap.
Creating Linux Strong Password files...
Running pre-200 hooks...
/ruby/bin/samba.pre-200: failed
grep: /sw/manifest: No such file or directory
ls: /sw/linuxapps/lib/: No such file or directory
/ruby/bin/ruby_startup_pre200.sh: Found no vmlinux file, skipping kdump vmcore analysis
BOOT: entering runlevel 200 (full operations)!
BOOT: System Initializing, please wait.Start service execve error: No such file or directory
2011 Jun 7 14:58:43 (none) Nodemgr: %WAAS-NODEMGR-3-330041: Start service execve error: No such file or directory
.Start service execve error: No such file or directory
Service start program '/sw/merlot/bin/spen' does not exist, err: No such file or directory
Service start program '/sw/merlot/bin/spen' does not exist, err: No such file or directory
.Service start program '/sw/unicorn/bin/uen' does not exist, err: No such file or directory
Service start program '/sw/unicorn/bin/aoim' does not exist, err: No such file or directory
WAAS-ARENALES#sh flash
Your software installation appears to be incomplete.
(could not access /sw/UP-TO-DATE or /swstore/manifest)
Please run 'copy ftp/cdrom install' to install a new image.
System image on flash:
Version: 4.2.3.b
System flash directory:
System image: 195 sectors
Bootloader, rescue image, and other reserved areas: 41 sectors
256 sectors total, 20 sectors free.
WAAS-ARENALES#sh disks details
Physical disk information:
disk00: Not used (*)
(*) Disk drive won't be used until replaced.
Mounted file systems:
MOUNT POINT TYPE DEVICE SIZE INUSE FREE USE%
No RAID devices present.
Disk encryption feature is disabled.
WAAS-ARENALES#
I will apreciate your help for my issue, I will probably is issue with the disk or It is neccesary a RMA for the HARDWARE?.
I hope your answer.
Regards,

Robert,
It is possible that disk00 is bad/ has failed. Try the following:
1) WAE(config)#no disk disk-name disk00 shutdown force
If you get output similar to below go to option 2.
pdi-574-rtp(config)#no disk disk-name disk00 shutdown force
It takes time spinning up disk0. Please wait.
Disk not insert or not spin up yet. Please check cable or check syslog for RAID rebuild start events!
2) You can try to re-install the software with the recovery CD.
http://www.cisco.com/en/US/partner/docs/app_ntwk_services/waas/waas/v431/configuration/guide/maint.html#wp1173532
If the option "Wipe out disks and install .bin image" fails because it can't find disk00 you most likely need an RMA for a disk and you will need to open a TAC case to get this processed.
Regards,
Mike Korenbaum
Cisco Data Center PDI Help Desk
http://www.cisco.com/go/pdihelpdesk

Similar Messages

I have a problem with disk utility that is not on my mac pro

I have a problem with disk utility that is not on my mac pro

Open your Applications folder then open the Utilities folder. It should be there.
If not, click the magnifying glass icon top right corner of your screen. That's Spotlight.
Type: Disk Utility
Hopefully it will show up.
Mac Basics: Spotlight

Problems with Disk Utility Repairing Permissions

Has anyone who had problems with Disk Utility after installing 10.5.1 through Software Update been able to resolve them by installing the Combo update instead?

The Solution?
REINSTALL OSX using the Install DVD.
I called APPLE Support and we went through a troubleshooting process to rule out Network Issues, Software Issues, File Issues and Hardware Issues. This process was very thorough.
In the end, we used the Operating System Installation DVD to reinstall the system, which took about 60 minutes including downloading the updates. Reinstallation did not affect any files or lose any applications. Everything was as I left it -- nothing was missing. Easy.
Now everything is back to normal.

Problems with Disk Utility

Hi,
iPhoto crashed my computer in a big way and after leaving the rainbow wheel for about an hour, with very sluggish response I kept the power button down and reset (without doing a shutdown).
Unfortunately it has a created a massive problem with my Macbook Pro, in so much that it no longer boots up.
I get the grey screen with the Apple and progress wheel, but then nothing.
I have booted from an external USB hard disk (also 10.6) and ran disk utility.
S.M.A.R.T. reports all ok
Repair disk reports all ok
Repair disk permissions fails with the following error:
Error: Permissions verify or repair failed
I've checked the system.log file and this is the error:
com.apple.DiskManagement.RepairPermissions|2011-09-05 18:15:02 +0100
Sep 5 18:16:38 unknown-c4-2c-03-37-31-6d diskmanagementd[1230]: APICALLBACK_dmAsyncFinishedForDisk_PERM_result dmErr=-9901 detailErr=10
Sep 5 18:16:38 unknown-c4-2c-03-37-31-6d com.apple.ReportCrash.Root[2005]: 2011-09-05 18:16:38.593 ReportCrash[2005:2703] Saved crash report for repair_packages[1996] version ??? (???) to /Library/Logs/DiagnosticReports/repair_packages_2011-09-05-181638_localhost.cra sh
There's other errors in the system.log, but these seem the most pertinent to the problem.
Can anyone please advise on how I repair this, or do I need to buy Disk Warrior and rebuild the directory structure?
Thanks,
GD

Hi,
Thanks for the reply.
Superduper to create a bootable carbon copy and TM for incrementals.
I really don't want to re-install OSX and then recover the components from TM though for several reasons.
Thanks.

Waas: problems with peers identification

good days all.
we have got a problems with peers' identification in waas solution.
topology: 1 central-manager and 2 nme-502, both nme located in different location and subnets, and both see each other (pings are available from nme to nme). Version of solution 4.1.3b
But one device on the central-manager page in point "TFO Peer List Reported ByDevice" show ip for distant device, but distant device in the same point shows "There are currently no Peers to display".
And no any optimization actions
All troubleshooting methodology and guidances are useless....
with hope to help, thanks

Let's start by making sure that interception and redirection are working properly. You can start with the troubleshooting guide here:
http://docwiki.cisco.com/wiki/Cisco_WAAS_Troubleshooting_Guide_for_Release_4.1.3_and_Later_--_Troubleshooting_WCCP
Regards,
Zach

My Mac Pro 1,1 won't boot, problems with disk.

I am having problems booting my 2006 Mac Pro 1,1. I was using my computer just fine and then I shut the computer down. When I tried to restart it the computer booted the the Apple logo and the status whell began turning, and then a progress bar appears under that and begins to load. It loads about 1/10 of the way, dissappears and then the computer shuts off.
I booted the computer using Command + R and attempted to reinstall OSX Lion, but it would not allow me to select a drive to install too. They are all grayed out. From here I went into Disk Utility and attempted to Verify Disk Permissions. A laundry list of errors immediatly came up. Next step was the verify the disk, at which point the message read that the disk seamed to be corrupted and needed to be repaired. I tried to repair the disk but was then told that the disk couldn't be repaired, to recover any data and reformat the drive.
The problem with this is that I have not backed anything up (yes I know I am a TARD) but this is my situation and I need some help. At this point I would just like to recover the info that's on this disk, and without a computer to do this I'm not sure how to do this. At this moment I am attempting to make a disk image of the corrupted drive in hopes that this will allow me to restore it later.
Please somebody help. I bought this computer with a lot of pre-installed programs, (i.e Adobe Creative Suite, Final Cut Studio, etc.) not to mention all of my other files.

I have an external drive that I used to keep files backup up on, again I'm a TARD, and no longer do. I've been messing around with the Recovery option when I boot and during this venture saw my main HD unmount and just would not do anything. After trying a few things I reset the system again and when I got back to recovery noticed that the drive had mounted again. I am now using disk utility to copy the entire contents of this main HD to the external drive. Est. time remaining is 12 hours. I did have the external filled up with some stuff but nothing I wasn't willing to trade for all of my applications (that came pre-installled when I bought the machine) and other files. I've read that even doing this isn't a fail proof way to solve the problem as their are still corrupted files, but Disk Utility said that my drive couldn't be repaired and to backup what I could and format the drive. I am hoping that backing up everything to this external drive will give me at least some oportunity to recover my apps, files etc. It also said that if disk utility couldn't fix the drive to boot from the CD and try it that way. Unfortunatly I downloaded Lion and don't have one. I just bought this HD about 2 years ago. Is a Seagate and I haven't had any problems from it. When my computer stopped working I had just been using it and just reset the computer. I am definitly going to get another drive but what are your thoughts on my ability to recover everything? I've heard there are some programs that can handle it.

Problems with Disk Utility & Mounting DMG!! Help!!

Hey guys, im a fairly inexperienced mac user anyways I recently bought a IBOOK G3 with Tiger 10.4 and i'm having major issues with Disk Utility and installing applications.
The issues with D.I are that it loads up then I get the error message "Disk Utlity started but a background process needed in Disk Utility didn't start properly. Please quit and restart Disk Utility. And when I do restart it, i get the same error over and over.
Also my second problem is whenever I try to and install DMG files I get the error: "Broken Pipe" and sometimes "Device Not Configured"
I've tried searching for resolutions for each problem but they both involve the other functioning! I'm really at a loss, i've tried using programs like pacifist to reinstall my original files etc and they haven't seemed to help.
Any advice would be greatly appreciated! Thank you xxx

Hi Kellie, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
Report if there were errors please.

Problem with Disk Utility and with ITunes and with Classic

Greetings. I have had problems with ITunes recently; when I try to open it, it gives me the error message: "The ITunes Music Library file is locked, on a locked disk, or you do not have write permission for this file."
When I looked at the ITunes discussion section, people had two ideas for other people who had the same problem:
(1) Make sure that the library of music files is write-enabled (which it is) and not locked (it isn't) and
(2) Go to Disk Utility and repair the disk.
Since (1) is not a problem, I am trying (2). However, when I open Disk Utility, it just stays on the window, stating "Gathering disk information..." and proceeds no further.
Perhaps related to these problems, when I try to start up Classic, the window opens, but it gets stuck at the very beginning (stating "Classic starting up using System Folder ...") and proceeds no further.
Can anyone help me with these multiple problems? Thanks in advance.

amandel
The problems you report are different than those relating to the iTunes receipts/DU conflict. Trashing those receipts as suggested is necessary to get DU to repair permissions, but, as I understand it, you couldn't get DU to recognise your drives. And I've seen no posts relating to iTunes 6 and Classic.
I've had the problem you describe before (at least vis-a-vis DU). In principle DU's "Repair Disk" function would fix it, but of course if the disk's don't mount in DU then you can't fix them:)
Therefore fsck is a good solution, or trying DU from the Installer Disk (don't start to install, just let the first installer window appear, go to the menu and choose "Open Disk Utility") and repairing. Then reboot and repair permissions, preferably with DU running from your hard drive.
Maybe you're more of a "don't touch what's still running" kind of person, but it sounds to me like the systems a bit wobbly and needs some tender loving care. You could try a clean up using a program like OnyX as well - it won't do any harm.
Robert
G4 PB Mac OS X (10.3.9)

Problems with disk drive assembly Satellite pro 4200

I have problems with a Satellite pro 4200.
The Notbook reads no more disks. The drive assembly I exchanged ready, however did not function. The drive assembly is addressed, but it is to be read not possible disks or formatted. Also a Bios update is not possible, since the drive assembly reads no more disks.
cu
Eltgen

Hi Eltgen
Sorry but it is not easy to say what the problem is on this way. If I understand you right you have built in a new FDD because old one was defective. Am I right?
It will be interesting to know is the new one already used part. Maybe is the new one also defective. I hope that a small control light is on if you put the disk inside.

Prepping to upgrade from 10.2.8 to 10.4 -- problem with Disk Utility

I have an 17" iMac that I'm preparing to upgrade from 10.2.8 to 10.4. In preparation, I did the following:
* Mounted a new external HD (LaCie) (my second one)
* Backed-up all personal files / folders to the new drive
* Ran Software Update to check for any recent updates - updated iTunes (6.0.3) + an iPod update
* Ran Disk Utility to repair permissions (which I do whenever I've installed or deteted software) -- Have never had any issues, but this is where my problem started.
Repair permissions hangs at the end (status bar to the very end), and it appears to be working on permissions related to iTunes (sorry, will have to run Disk Utility again and follow-up with the specifics). I ran it twice with the same result.
I saw other threads suggesting that the problem may be with the latest iTunes update (recommending moving the iTunes application folder to the desktop and rerunning Disk Utility), but it seems specific to 10.3. Could this be an issue with 10.2.8 as well. If I can successfully complete repairs to permissions (with the above workaround), can I proceed with the 10.4 upgrade, and if so, what should I do with the iTunes application folder (keep it on the desktop, or move it back)?
Thanks

Cornelius ... thanks for the follow-up. I went ahead and tried both methods, although I should note that I didn't show the iTunes.pkg or iTunesPhoneDrive.pkg files in the Library>Receipts folder as described in the two approaches. I had no luck at all with Kappy's solution (I moved the one file I did have -- iTunesX.pkg -- and Disk Utility stalled as before). I moved iTunes.pkg back to its original folder, and tried the first method you described. I moved the iTunes app to my desktop, and I was able to successfully repair permissions. I trashed two files (iTunes3.pkg and iTunes4.pkg) and left the iTunesX.pkg file as instructed (again, I don't show the iTunesPhoneDriver.pkg file at all). I reran Disk Utility with the same faulty result.
I suspect it may have something to do with the missing files. Any thoughts on that?
Thanks again.
Max:
Sorry I misunderstood you. Actually you don't move
your iTunes folder at all. Here are a couple of
procedures. Since I have not had to use it I can't
vouch for either, but I have heard both have worked
for others.Just to catalogue the
solutions listed above
Here's what I did, and it worked fine.
1) Move iTunes onto the Desktop.
2) Run Disk Utility
3) Go to HD>Library>Receipts and trash all iTunes
.pkg files EXCEPT for iTunesX.pkg and
iTunesPhoneDriver.pkg
4) empty Trash.
5) move iTune from Desktop back to 'Applications'.
Hey presto. you should now be able to repair
permissions again.
HTH
Kappy’s solution
1. Navigate to the /Library/Receipts/ folder.
2. Locate the iTunes.pkg and iTunesX.pkg files and
move them to the Desktop.
3. Run Disk Utility and repair permissions.
4. Move the .pkg files back into the
/Library/Receipts/ folder.Note that you
are not moving the iTunes folder, but the .pkg files
from the Receipts folder. In the first method you
Trash some of them, in the second you move them back.
But you don't touch the iTunes application as such.
Good luck.
cornelius
PismoG4 550,
100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X
(10.4.5) Mac OS X (10.4.5) Beige G3 OS
8.6

Known problem with Disk Utility formatting Windows NT drive ?

I have had a strange problem while formatting a newly purchased Iomega USB (Seagate) with version 11.1 (252.4) of Disk Utility (OS 10.5.8). The drive was NTSF and I wanted Mac OS extended. The first attempt failed, unfortunately I didn't note the exact message. I tried again and this time D.U. was stuck on on a wait progress bar with message "not a multiple of 4". Disk Warrior reported disk too severly damaged. Only Drive Genius could properly format the drive. Anyone knows what happened?

I'm not sure what caused the problem you observed, but did you first change the partition scheme to a Mac-friendly one before you tried to do the reformat?
Thanks.
Well, no I didn't and I simply applied "erase to Mac OS extended". Maybe there is a change from earlier versions of D.U. So far and as far as I am aware, D.U. would erase a DOS disk and by default choose the Apple partition scheme. But this default setting could have been changed to GUID with the Intel Macs, or even to DOS if the drive is DOS. This option is hidden in further options in the partition settings along with the DOS partition scheme and unless you decide to partition the drive and not just erase it, it is not visible. As a matter of facts, Drive Genius offers the choice between Mac OS and GUID as you erase the disk.
So this could be the culprit, if for instance D.U. erased to Mac OS extended but kept the DOS partition scheme. It seems unlikely though that the developers didn't take that error possibility into account to include a warning of some sort... but that's what I wanted to make sure.

Full start up disk... problem with disk partition.

Hi,
Ive got an original blueberry ibook which an ex, who considered himself some sort of high flying computer buff, decided to fiddle with... In his vast wisdom he deemed that my ibook would run better if he partitioned the start-up disk. The result being a slow running laptop, constant warnings that my start-up disk is full, a keyboard that doesnt function properly, hence missing characters and being unable to use the delete key.
The message that comes up warning about the start-up disk being full says that I need to delete stuff to make room so that it can run properly. Ive tried going into the disk utility thing but it wont allow me to restore the disk back to its original state. I dont know a huge amount about computers but I have tried deleting all programs I dont use and having a good clear out but it hasnt made an ounce of difference.
Does anyone have any idea how to get around this problem? All suggestions appreciated.

Hi dancingdryad
The first thing to check is, have you emptied the trash.
Deleting Applications (programs) should not be necessary, rather the space is more likely being taken up by too many of your documents.
The space has been filled up by your own files, generally called documents, but also includes, videos you have downloaded, photos, music. These are files that you have either created or downloaded and these are the things to move.
So look in your Documents folder, in the iTunes and iPhoto applications, for excess photos and music that you can move onto an external drive, or burn to a CD.
And after trashing something, do empty the trash.
If you have a Previous System Folder on the hard drive, you can trash that as well.
Extra tips from Dr Smokes can be read here:
http://www.thexlab.com/faqs/freeingspace.html
happy house cleaning.
regards roam

Problem with Disk Repair

Hi,
Utilities>Disk Utility>Verify Disk.
This is what happened...
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
61 %)
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Volume Header needs minor repair
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
I don't quite know what to make of this. Do you have any suggestions?
Thanks in advance for your help.
14.1 LCD iBook G4 Mac OS X (10.4.4) 40GB Hitachi HD

hello Mac attac, welcome to discussions,
I had the same problem just about a week ago, it's simple and easy to repair. You need to reboot from your Mac OSX install disc (reboot with the cd inside the computer), once you here the dong, hold "C" down, until... you'll see (not quite sure what appears)
Go in the disk utility in one of the menus, and repair your disk... It took about 10 minutes fo me to clean the mess up, now computer runs great!!
Hope you'll solve your problem,
Best to you
Charles

Problem with disk utilities

hello, ive bought recentrly a usb handstick from sandisk. when i connect it with my mac, it lightens up but it is not recognised. i know i have to format to FAT with this problem, but when i open disk utilities, i cant find usb handstick on the left of the screen to select is for format....
how can i format when it cant be found at disk utilities?
i have also heard from a guy that there is a little program to download (all ntfs, dont remember it well) and then you dont have to format your handstick device.. true?
regards
jeremy
Message was edited by: jerrremyyy

If the drive can't even be seen in Disk Utility then there is a good possibility that either the stick itself, or your USB port is faulty , jerremyy. Even an NTFS formatted drive should be visible.
If the USB port works fine with other devices then you can probably assume that the stick itself is faulty.
Cheers
Rod

Problems with Disk Utility backup & restore via DMG disk images

I attempted to backup and restore a 2TB external raid storage device using the recommended Disk Utility procedure for 10.6.6. One of the HDDs in the raid enclosure had started to fail.
First step was to create a new image from the 2TB device. I accepted the defaults of compressed image format and no encryption. The image took about 15 hours to create, and when complete, I was left with 2 files:
OWC2TB.dmg (1.1TB)
OWC2TB.002.dmgpart (486GB).
To check the DMG I ran the Disk Utility "Verify Disk" on the DMG, and got the message "The volume OWC2TB appears to be OK". The DMG is described in DU as:
Description: Apple UDIF read-only compressed (zlib)
Connection Bus: Disk Image
Total Capacity: 2 TB
Disk Write Status: Read Only
Partition Map Scheme: No partition map
I then replaced the failing HDD in the enclosure, recreated a new 2TB filesystem on the device, and attempted to restore from the DMG image.
The first attempt was to use Disk Utility "Restore" function. I specified the DMG as the source and the new device as the destination, and chose "Erase Destination". This failed immediately with the error "Restore failure. Could not find any scan information. The source images needs to be imagescanned before it can be restored".
After researching this error I tried to correct it by selecting the DMG in Disk Utility and running Images => Scan Image for Restore. This failed immediately, complaining there was insufficient disk space. More research revealed it needed the same amount of spare space on the same disk to do an imagescan. So I had to free up an EXTRA 1.5TB of space in addition to the space the DMG consumed. Not very user friendly.
The next attempt to imagescan the DMG got further than the "insufficient space" error. It displayed "Scanning image OWC2TB.dmg, Block Checksum Partition #1". This ran for about 10 hours. At the end, it displayed a new error message "Unable to scan OWC2TB.dmg (internal error)".
Next I tried to mount the DMG and copy the files manually. My first attempt at this resulted in a "Verifying..." phase which looked like it will take about 10 hours, so I clicked "Skip". Soon after I got an error message "Unable to attach OWC2TB.dmg (no mountable file systems).". Now I am trying a mount with the Verify option...
Can anyone suggest what I can try next to restore the DMG?
I think the problem might be the fact the DMG is split in two parts, but the imagescan/restore software does not know how to read the second part? Is there a way to join these into a single DMG?

I attempted to backup and restore a 2TB external raid storage device using the recommended Disk Utility procedure for 10.6.6. One of the HDDs in the raid enclosure had started to fail.
First step was to create a new image from the 2TB device. I accepted the defaults of compressed image format and no encryption. The image took about 15 hours to create, and when complete, I was left with 2 files:
OWC2TB.dmg (1.1TB)
OWC2TB.002.dmgpart (486GB).
To check the DMG I ran the Disk Utility "Verify Disk" on the DMG, and got the message "The volume OWC2TB appears to be OK". The DMG is described in DU as:
Description: Apple UDIF read-only compressed (zlib)
Connection Bus: Disk Image
Total Capacity: 2 TB
Disk Write Status: Read Only
Partition Map Scheme: No partition map
I then replaced the failing HDD in the enclosure, recreated a new 2TB filesystem on the device, and attempted to restore from the DMG image.
The first attempt was to use Disk Utility "Restore" function. I specified the DMG as the source and the new device as the destination, and chose "Erase Destination". This failed immediately with the error "Restore failure. Could not find any scan information. The source images needs to be imagescanned before it can be restored".
After researching this error I tried to correct it by selecting the DMG in Disk Utility and running Images => Scan Image for Restore. This failed immediately, complaining there was insufficient disk space. More research revealed it needed the same amount of spare space on the same disk to do an imagescan. So I had to free up an EXTRA 1.5TB of space in addition to the space the DMG consumed. Not very user friendly.
The next attempt to imagescan the DMG got further than the "insufficient space" error. It displayed "Scanning image OWC2TB.dmg, Block Checksum Partition #1". This ran for about 10 hours. At the end, it displayed a new error message "Unable to scan OWC2TB.dmg (internal error)".
Next I tried to mount the DMG and copy the files manually. My first attempt at this resulted in a "Verifying..." phase which looked like it will take about 10 hours, so I clicked "Skip". Soon after I got an error message "Unable to attach OWC2TB.dmg (no mountable file systems).". Now I am trying a mount with the Verify option...
Can anyone suggest what I can try next to restore the DMG?
I think the problem might be the fact the DMG is split in two parts, but the imagescan/restore software does not know how to read the second part? Is there a way to join these into a single DMG?

WAAS problem with DISK

Similar Messages

Maybe you are looking for