Waas: problems with peers identification
good days all.
we have got a problems with peers' identification in waas solution.
topology: 1 central-manager and 2 nme-502, both nme located in different location and subnets, and both see each other (pings are available from nme to nme). Version of solution 4.1.3b
But one device on the central-manager page in point "TFO Peer List Reported ByDevice" show ip for distant device, but distant device in the same point shows "There are currently no Peers to display".
And no any optimization actions
All troubleshooting methodology and guidances are useless....
with hope to help, thanks
Let's start by making sure that interception and redirection are working properly. You can start with the troubleshooting guide here:
http://docwiki.cisco.com/wiki/Cisco_WAAS_Troubleshooting_Guide_for_Release_4.1.3_and_Later_--_Troubleshooting_WCCP
Regards,
Zach
Similar Messages
-
Problem with call identification
Hello.
I'm doing tests with a E61, E65 and E71 phones.
I have the same problem.
I've installed Mnotes suites for synchronize Lotus Notes mail with this phones. This is OK.
I also synchronize the guide with our corporative directory of people. It's OK. I receive the contacts correctly and I can phone them correctly.
The problem is with the call identification. These mobiles can manage 4 directories, but only the contacts in SIMM are identified when they call.
Can I configure these phones for identify the callers wihen they are inserted in a guide not in the SIMM?
Can you help me?ooops. Reading back it makes it sound as though it is an nvidia file. It isn't - it's a part of PRE9 and can be found in the Adobe Premiere Elements program folder (with "Adobe Premiere Elements 9.exe" and "Adobe Premiere Elements.exe".
Remember you have to run it from a command prompt.
Cheers,
Neale
Insanity is hereditary, you get it from your children -
Problem with adapterspecific identification
Hallo,
I've created a new logical system with transaction bd54. then I have created a new business-system in the repository. then I klick an this business system and go to menue "service --> adapterspecific identification" and I klick an button "synchronize with sld". No logical system for the IDoc-Adapter is shown.
Can anybody help me please?
Thanks.
Regards
StefanHello,
Go thru this blog...
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Adapter-Specific Identifiers
http://help.sap.com/saphelp_nw04/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm
Adapter-Specific Message Attributes in the Message Header
http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/content.htm
**********Reward points,if found useful -
Dear,
My WAAS have a issue I will apreciate your help .
When I switch on my WAAS show the next messages:
Cisco Wide Area Application Services Software (WAAS)
Copyright (c) 1999-2010 by Cisco Systems, Inc.
Cisco Wide Area Application Services Software Release 4.2.3 (build b7 Jul 29 2010)
INIT: Entering runlevel: 3
Node Health Manager started...
Nodemgr started!
2011 Jun 7 14:58:30 (none) kernel: %WAAS-SYS-3-900000: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
2011 Jun 7 14:58:30 (none) kernel: %WAAS-SYS-3-900000: sd 2:0:0:0: [sdb] Assuming drive cache: write through
2011 Jun 7 14:58:30 (none) kernel: %WAAS-SYS-3-900000: sd 2:0:0:0: [sdb] Assuming drive cache: write through
2011 Jun 7 14:58:30 (none) kernel: %WAAS-SYS-3-900000: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
BOOT-100: disk apply
/ruby/bin/ruby_disk: First disk is missing, bad, marked bad, disabled via shutdown, or it has unknown data.
/ruby/bin/ruby_disk: Second disk is bad, missing, or shutdown; bailing out
ssmgr: open(/state/safestate, O_WRONLY|O_CREAT) failed: No such file or directory
ssmgr: op_open or media_open
IQ¥ failed: No such file or directoryñ=}
ssmgr: open(/state/safestate, O_WRONLY|O_CREAT) failed: No such file or directory
ssmgr: op_create or media_init
SSMGR RETURNING: 10 (No such file or directory)
2011 Jun 7 14:58:33 (none) memconfig: %WAAS-NODEMGR-3-330106: Memconfig: Cannot open /state/dre-diskspace file, errno: 2
2011 Jun 7 14:58:33 (none) memconfig: %WAAS-NODEMGR-3-330109: Memconfig: disk space allocated to DRE is 0, assuming DRE memory allocation of 100MB
One or more system software partitions are not mounted.
Check if disk00 is bad.
Initializing kernel random number generator...
/ruby/bin/ruby_startup_pre200.sh : Start KDUMP functionality...
Starting kdump failed.
/sw or /swstore doesn't exist! Won't turn on swap.
Creating Linux Strong Password files...
Running pre-200 hooks...
/ruby/bin/samba.pre-200: failed
grep: /sw/manifest: No such file or directory
ls: /sw/linuxapps/lib/: No such file or directory
/ruby/bin/ruby_startup_pre200.sh: Found no vmlinux file, skipping kdump vmcore analysis
BOOT: entering runlevel 200 (full operations)!
BOOT: System Initializing, please wait.Start service execve error: No such file or directory
2011 Jun 7 14:58:43 (none) Nodemgr: %WAAS-NODEMGR-3-330041: Start service execve error: No such file or directory
.Start service execve error: No such file or directory
Service start program '/sw/merlot/bin/spen' does not exist, err: No such file or directory
Service start program '/sw/merlot/bin/spen' does not exist, err: No such file or directory
.Service start program '/sw/unicorn/bin/uen' does not exist, err: No such file or directory
Service start program '/sw/unicorn/bin/aoim' does not exist, err: No such file or directory
WAAS-ARENALES#sh flash
Your software installation appears to be incomplete.
(could not access /sw/UP-TO-DATE or /swstore/manifest)
Please run 'copy ftp/cdrom install' to install a new image.
System image on flash:
Version: 4.2.3.b
System flash directory:
System image: 195 sectors
Bootloader, rescue image, and other reserved areas: 41 sectors
256 sectors total, 20 sectors free.
WAAS-ARENALES#sh disks details
Physical disk information:
disk00: Not used (*)
(*) Disk drive won't be used until replaced.
Mounted file systems:
MOUNT POINT TYPE DEVICE SIZE INUSE FREE USE%
No RAID devices present.
Disk encryption feature is disabled.
WAAS-ARENALES#
I will apreciate your help for my issue, I will probably is issue with the disk or It is neccesary a RMA for the HARDWARE?.
I hope your answer.
Regards,Robert,
It is possible that disk00 is bad/ has failed. Try the following:
1) WAE(config)#no disk disk-name disk00 shutdown force
If you get output similar to below go to option 2.
pdi-574-rtp(config)#no disk disk-name disk00 shutdown force
It takes time spinning up disk0. Please wait.
Disk not insert or not spin up yet. Please check cable or check syslog for RAID rebuild start events!
2) You can try to re-install the software with the recovery CD.
http://www.cisco.com/en/US/partner/docs/app_ntwk_services/waas/waas/v431/configuration/guide/maint.html#wp1173532
If the option "Wipe out disks and install .bin image" fails because it can't find disk00 you most likely need an RMA for a disk and you will need to open a TAC case to get this processed.
Regards,
Mike Korenbaum
Cisco Data Center PDI Help Desk
http://www.cisco.com/go/pdihelpdesk -
A problem with RDP when WAEs was connected to the network
The customer has a problem with RDP sessions on one Microsoft cluster server. The problem started when the WAEs (management and acceleration WAEs) are connected to a network (where a cluster is connected). Did anybody have the similar problem? The sessions are connected, but after some different times these sessions are frozen. This problem is only with this Microsoft cluster, the RDP on other servers are good. The WAAS is 4.0.17b14.
Hi,
I have the same problem as I write. RDP seems to get slower when I connect the WAEs and the login timesout before the user can type the username and password.
I have ensured that "EPM Classification" is disbled.
Check and see if Term-services are well configured on the TS server side. Maybe some config is conflicting with WAAS TS optimization.
What happens when you set TS to passthrough?
Also try this for your case;
" HOW-TO: Configuring RDP and Terminal Services for Full WAAS Optimization
Microsoft RDP and Terminal Services are, by default, compressed and encrypted. As such, the default Cisco WAAS policy for these applications is to apply TCP optimizations only. RDP and Terminal Services can be configured to allow Cisco WAAS to provide full optimization (DRE, LZ, TFO) which is a 2X-10X improvement over native WAN and 2X-3X improvement over the compression provided by Microsoft.
Configuring Microsoft RDP and Terminal Services to support Cisco WAAS full optimization requires a change to the client and a change to the server.
On the client, disable compression by editing the .RDP file for the connection using Notepad or a similar text editor. Identify a line in the file that shows "compression:i:1". Modify this line to say "compression:i:0". This disables compression for the RDP/TS connection.
On the server, open the Terminal Services Configuration found under Start > Programs > Administrative Tools. From here, expand Terminal Services Configuration to Connections. Double-click the "RDP-Tcp" entry found in the workspace. Change the encryption level to "Low", which specifies that only login will be encrypted. Then, click "Ok" and close Terminal Services Configuration.
Then, modify the Cisco WAAS policy on the configured device group (or explicitly on each of the WAEs) called "MS-Terminal-Services". Set this policy to "Optimize Full". "
Anyone out there with a clue why RDP gets disconnected? -
A problem with WAAS mobile client
The customer has a problem with WAAS mobile client. When he disabled WAAS mobile client - all is working, but http is not working.:-( On the server the accelerated networks are configured.The browser send the http request, but the response is not received:-( For other clients it is working. Thank you for help.
I have WAAS mobile server version 3.4.0.1460 on the Windows2003 server with SP1. Client OS is Windows XP. All clients who use WAAS mobile client have WinXP on their notebooks. All clients are on the same network. This client sees this problem when the waas client is active, disabled, and for now when the waas mobile client is uninstalled - it seems like waas mobile client changed registers for IE or FireFox - so all http answers are redirected to nonexisting waas mobile client:-(
Thank you
Roman -
Problem with htmldb 2 (Sorry APEX)!
I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
PlsqlDatabaseConnectString chagh
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
# server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do NOT add a slash at the end of the directory path.
ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# SendBufferSize: controls setsockopt() call made to set send buffer size on
# all sockets. Default OS value on most Windows platforms is too small.
# Larger values can help if the average page size served by OHS is
# large (~64 k)
SendBufferSize 16384
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Apache on Win32 always creates one child process to handle requests. If it
# dies, another child process is created automatically. Within the child
# process multiple threads handle incoming requests. The next two
# directives control the behaviour of the threads and processes.
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For Win32, set this value to zero (unlimited)
# unless advised otherwise.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
ThreadsPerChild 50
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#MinSpareServers 5
#MaxSpareServers 20
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#MaxClients 150
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your Apache
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.dll
LoadModule mime_magic_module modules/ApacheModuleMimeMagic.dll
LoadModule mime_module modules/ApacheModuleMime.dll
LoadModule dbm_auth_module modules/ApacheModuleAuthDBM.dll
LoadModule digest_auth_module modules/ApacheModuleAuthDigest.dll
LoadModule anon_auth_module modules/ApacheModuleAuthAnon.dll
LoadModule cern_meta_module modules/ApacheModuleCERNMeta.dll
LoadModule digest_module modules/ApacheModuleDigest.dll
LoadModule expires_module modules/ApacheModuleExpires.dll
LoadModule headers_module modules/ApacheModuleHeaders.dll
LoadModule proxy_module modules/ApacheModuleProxy.dll
LoadModule speling_module modules/ApacheModuleSpeling.dll
LoadModule status_module modules/ApacheModuleStatus.dll
LoadModule info_module modules/ApacheModuleInfo.dll
LoadModule usertrack_module modules/ApacheModuleUserTrack.dll
LoadModule vhost_alias_module modules/ApacheModuleVhostAlias.dll
LoadModule agent_log_module modules/ApacheModuleLogAgent.dll
LoadModule referer_log_module modules/ApacheModuleLogReferer.dll
LoadModule perl_module modules/ApacheModulePerl.DLL
LoadModule fastcgi_module modules/ApacheModuleFastCGI.dll
LoadModule onsint_module modules/ApacheModuleOnsint.dll
LoadModule wchandshake_module modules/ApacheModuleWchandshake.dll
ClearModuleList
AddModule mod_so.c
AddModule mod_onsint.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_negotiation.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_setenvif.c
AddModule mod_isapi.c
AddModule mod_vhost_alias.c
AddModule mod_log_referer.c
AddModule mod_log_agent.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_digest.c
AddModule mod_cern_meta.c
AddModule mod_digest.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_proxy.c
AddModule mod_speling.c
AddModule mod_info.c
AddModule mod_status.c
AddModule mod_usertrack.c
AddModule mod_perl.c
AddModule mod_fastcgi.c
AddModule mod_wchandshake.c
<IfDefine SSL>
LoadModule ossl_module modules/ApacheModuleOSSL.DLL
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# Port: The port to which the standalone server listens. Certain firewall
# products must be configured before Apache can listen to a specific port.
# Other running httpd servers will also interfere with this port. Disable
# all firewall, security, and other services if you encounter problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
Port 7777
Listen 7777
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# Under Win32, we do not currently try to determine the home directory of
# a Windows login, so a format such as that below needs to be used. See
# the UserDir documentation for details.
<IfModule mod_userdir.c>
UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# Alternate "common" format to use when fronted by webcache:
# LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
# When webcache is forwarding requests to OHS, %h becomes the IP of
# the originating webcache server and the real client IP is stored
# in the ClientIP header. The common_webcache format can be used
# in place of the common format when using webcache but with one
# important caveat: if clients are capable of bypassing webcache
# then it is possible to spoof the client IP by manually setting
# the ClientIP header so the %h field should be monitored in such
# an environment. Another alternative to specifying the ClientIP
# header directly in a LogFormat is to use the "UseWebCacheIp"
# directive:
# UseWebCacheIp On
# When this is specified, %h is derived internally from the ClientIP
# header and the access log format does not need to be modified.
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
# Note you mustnot_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Directory "icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_perl.c>
Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
</IfModule>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
# "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
# Note, add the option TrackModified to the IndexOptions default list only
# if all indexed directories reside on NTFS volumes. The TrackModified flag
# will report the Last-Modified date to assist caches and proxies to properly
# track directory changes, but it does not work on FAT volumes.
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
AddType text/xml xbl
AddType text/x-component htc
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
<IfModule mod_perl.c>
# Perl Directives
# PerlWarn On
# PerlFreshRestart On
# PerlSetEnv PERL5OPT Tw
# PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
PerlModule Apache
# PerlModule Apache::Status
PerlModule Apache::Registry
# PerlModule Apache::CGI
# PerlModule Apache::DBI
# PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
# <Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from localhost
# </Location>
</IfModule>
#Protect WEB-INF directory
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
<IfModule mod_ossl.c>
SSLOptions +StdEnvVars
</IfModule>
</Directory>
</IfModule>
# Include the configuration for Apache JServ 1.1
#include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
# Setup of oprocmgr module.
# This directive identifies each remote apache instance that will be
# sending requests to processes (e.g., JServs), managed by local Apache
# instances. This directive is used by the local process manager to share
# routing information with remote apache instances via non-SSL HTTP messages.
# The directive is repeated for each remote apache instance that will be
# sending requests. The ProcNode directive that refers to the local apache
# instance will be ignored, but may be supplied to facilitate uniformity
# in configuration across apache instances. Arguments to the ProcNode must
# be sufficient to reach the remote instance of apache via non-SSL HTTP
# messages. It is not considered an error if the remote apache instance is
# unreachable, as no assumption is made about the starting order or
# availability of apache instances.
# Syntax: ProcNode <hostname> <port>
# Example: ProcNode abc.com 7777
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
</IfModule>
# Include the mod_oc4j configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
# Include the mod_dms configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
# Loading rewrite_module here so it loads before mod_oc4j
LoadModule rewrite_module modules/ApacheModuleRewrite.dll
# Include the SSL definitions and Virtual Host container
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
# Include the mod_osso configuration file
#include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
# Include the Oracle configuration file for custom settings
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
------------------------------------------------------------------------------------------------------------------Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
Secondly, I'm confused by your comment -
I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
Thirdly, I notice from your config file -
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed? -
Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome
Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
#slideshow {
padding: 10px;
margin:0;
#slideshow-caption{
padding:0;
margin:0;
#slideshow img, #slideshow div {
padding: 10px;
background-color: #EEE;
margin: 0;
body {
font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
background: #004B8D;
margin: 0;
padding: 0;
color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
/* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
position:relative;
left:-90px;
width:950px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
z-index:1000;
.slide{
position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
color: #42413C;
text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
color: #6E6C64;
text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
width: 960px;
min-height:900px;
padding:5px 0px 0px 0px;
background: #E8F8FF;
margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
background: #E8F8FF;
padding:10px 5px 0px 5px;
.sidebar1 {
float: left;
width: 225px;
margin: 60px;
color: #FFFF0D;
background: #595FFF;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
padding: 5px 5px 0px 5px;
border: 3px solid #F7F723;
z-index:-1;
.sidebar2 {
float: left;
width: 275px;
color: #FFFF0D;
text-align: left;
background: #595FFF;
padding-bottom: 10px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
border: 3px solid #F7F723;
z-index:2;
.sidebar3 {
float: left;
width: 275px;
color: #FFFF0D;
text-align: left;
background: #595FFF;
padding-bottom: 10px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
border: 3px solid #F7F723;
z-index:3;
.content {
padding: 0px 0px 0px 0px;
width: 780px;
float: left;
background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
list-style: none; /* this removes the list marker */
border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
margin-bottom: 50px; /* this creates the space between the navigation on the content below */
font: Arial Black, Verdana, , Helvetica, sans-serif;
font-size:1.3em;
font-weight:bold;
z-index:2;
ul.nav li {
border-bottom: 0px solid #FFFF66; /* this creates the button separation */
font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
padding: 3px 0px 5px 0px;
display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
text-decoration: none;
color: #FFFF0D;
background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
background: #595FFF;
font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
padding: 10px 0;
background: #595FFF;
color: #FFFF0D;
position: relative;/* this gives IE6 hasLayout to properly clear */
clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
float: left;
margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header"><!-- end .header -->
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
<ul class="nav">
<li><a href="about.html">About Us</a></li>
<li><a href="history.html">Reardan History</a></li>
<li><a href="activities.html">Activities</a></li>
<li><a href="business.html">Business<br />
Directory</a></li>
<li><a href="about.html">Join the<br />
Chamber</a></li>
<li><a href="links.html">Links<br />
<span style="font-size: 85%">Tourism</span><br />
</a></li>
</ul>
<!-- end .sidebar1 --></div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
after: slideshowOnCycleAfter, //the function that is triggered after each transition
autostop: false, // true to end slideshow after X transitions (where X == slide count)
fx: 'blindX',// name of transition effect
pause: false, // true to enable pause on hover
randomizeEffects: true, // valid when multiple effects are used; true to make the effect sequence random
speed: 100, // speed of the transition (any valid fx speed value)
sync: true, // true if in/out transitions should occur simultaneously
timeout: 5000, // milliseconds between slide transitions (0 to disable auto advance)
fit: true,
height: '300px',
width: '525px' // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
if (slideshowAddCaption==true){
$('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
<!--All elements inside this will become slides-->
<img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
<div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
<img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>
<!--It is safe to delete this if captions are disabled-->
<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
<br />
<br />
<br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center"> <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
<br />
<br />
<br />
<br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
<p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
<span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
</p>
<!-- end .footer -->
</div></body>
</html>If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
float: left;
width: 225px;
margin: 60px 0px 60px 60px;
color: #FFFF0D;
background: #595FFF;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
padding: 5px 5px 0px 5px;
border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px; -
Problem with BDOCS Business Partner CRM - PSCD(R/3)
I have a problem with BDOCS (Middleware, Data Exchange Synchronization).
I configured only Synchronization for Business Partner Type 2 Organization and 3 Group(In the Initial Load). However, when PSCD add or modify Identification Number (table : BUT0ID) for other types of Business Partner, for example type 1 Person, the BDOCS generate a update in CRM (inbound queue) specifically produced a show processes in PSCD, because the table TRFCOUT progressively grow, and also in the outbound queues table.
Do you have any idea what happen ??
or if i can use a kind of filter to the Bdocs online??
Because i only can filter the BDOCS in the initial load but not in the bdocs online.
thanks in advancedHi,
Configuring the business partner integration from R/3 is done in the PIDE-transaction on the R/3-side and in the customer_main object on CRM-side. Simply enter the filter settings in the object, sync it with R/3, check your filter settings in table CRMFILTAB on the R/3 side.
Grtz,
Michael. -
I've had this for sometime and this laptop for about 1 year. Never saw this before, but haven't tryed to line up with ITunes for a while. I get a notice from windows that there is a problem with the drive and it asks it i want to fix it. Nothing happens if i try, so I have not persued that avenue. ITunes says a IPod is detected but the identification cannot be verified. Whats up with that?
ThanksHello, Wallydawg.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this error.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Cheers,
Jason H. -
Hi everybody.
I´ve got a problem with an inbound idoc. I've got a standard idoc INOTIF with an extension.
To receive this Idoc from external systema I´ve created a Z FM to process this idoc.
The problem is that when this idoc get to SAP the FM never is executed and the idoc appears with red flag and show me
the next error: No status record was passed to ALE by the application and the idoc is shown with the status 51.
¿¿How can I fix this??
Thanks a lot
Regardshi
and also give the funtion type is function module in we57 and in BD51 give ur ZFM and give 1 in input.t field.
now you can see ur FM in WE42 under Identification field F4 value.
The FM which is created by you it should be in F4 help list fo field Identification in we42.
and give the Message type and Process code in we20 in inbound parameters.
i am sure this will work .
regards,
Kiran Jagana -
Problem with Acrobat Pro - install, etc.
I have problem with my Acrobat Pro (in Adobe Design Standard CS6 edition) - Regularly once a month throughout the software crashes and will not turn on. Only helps to re-install. Now I additionally happened that when reinstalling does not load serial number. It made me very disgruntled. Can you please help? Acrobat Pro I still need to work and this is me terribly resides. My customer identification number is : 168735979. Thank you.
Thank you but unfortunately the process does not work. It makes the same thing as before. When I install and enters the serial number, it writes: We are unable to verify the product serial number Creative Suite 6 Design Standard. Please contact Customer Support.
When I deactivated Photoshop and re-activated by the process, everything went without a problem. The problem is only with Acrobat Pro. Acrofix - after running only flashes a command prompt window, otherwise nothing happens. I do not know what to do .... -
Charm: BP problem with the user
Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
ThomHi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen -
Disconnection problems with online gaming - world ...
Other users on BT have alos reoported issues with game hangs and diconnection issues with World of Tanks.
They seem to have started a few days ago. Someitme it is intermittant other times it can last for several minutes.Having the same issue since yesterday 6th September 2012.
World of Tank client keeps disconecting, then has issues logging back in to the client.
This seems to be hapening to a lot of other players in the UK all on BT
http://forum.worldoftanks.eu/index.php?/topic/149124-lag-and-disconnection/
BT had the same problem with World of Warcraft recently, something to do with a BT peering issue. I can only hope this problem is sorted soon.
No other internet activity is affected. -
Hi everyone,
I have been trying to get this GUI built from the ground up and I have encountered a problem with the GridBag(exception error that the fields being added can not be done. Also, my method main seems to be off track, I have a working program which the display fields have been modified to display object and everything else is the same except that I can not get the GUI to run.
The following is the code and any suggestions as to what I can do to get this going will be appreciated. Thank you.
import javax.swing.JLabel; /* displays text and images*/
import javax.swing.SwingConstants; /* common constants used with Swing*/
import javax.swing.Icon; /* interface used to manipulate images*/
import javax.swing.ImageIcon; /* loads images*/
import javax.swing.JOptionPane;
import java.util.*;
import java.io.PrintStream;
import java.text.DecimalFormat;
import java.text.NumberFormat;
import java.text.*;
import javax.swing.JFrame;/* provides basic window features*/
import java.util.Arrays;
import javax.swing.ImageIcon.*;
import java.awt.event.*;
import javax.swing.*;
import java.awt.*;
public class FinalInventoryGUI extends JFrame
{//Private variables.
private GridBagLayout layout = new GridBagLayout();
private GridBagConstraints constraints = new GridBagConstraints();
//Private data from main program
private String productName;
private String itmeNumber;
private double unitPrice;
private int unitStock;
private double productValue;
private double inventoryValue;
private double reStkfee;
//Declaration of the JLabels.
private JLabel logoLabel;
private JLabel productNameLabel;
private JLabel itemNumberLabel;
private JLabel unitPriceLabel;
private JLabel unitStockLabel;
private JLabel productValueLabel;
private JLabel InventoryValueLabel;
private JLabel reStkfeeLabel;
//Declaration of the text Fields for data Entry.
private JTextField productNameText;
private JTextField itemNumberText;
private JTextField unitPriceText;
private JTextField unitStockText;
private JTextField productValueText;
private JTextField inventoryValueText;
private JTextField reStkfeeText;
private JTextField titleText;
//Declaration of the JButtons for user interface.
private JButton first;//To move to first element in the array.
private JButton next;//To move to next element in the array.
private JButton previous;//To move to next element in the array.
private JButton lastButton;//To move to the first element in the array.
private JButton addButton;//To add a product to the array.
private JButton modifyButton;//To modify an element in the array.
private JButton deleteButton;//To remove a product from the array.
private JButton saveButton;//To save the array elements to C:\.
private JButton searchButton;//To search for an element in the array.
private Product products[];//Declaration of array product[] for storing entries.
private int NumOfProducts;//Declaration of the variable defining the number of products.
private int Index=0;//Setting the counter index to initiate at "0".
//Constants
private final static int LOGO_WIDTH = 4;
private final static int LOGO_HEIGHT = 4;
private final static int LABEL_WIDTH = 1;
private final static int LABEL_HEIGHT = 1;
private final static int TEXT_WIDTH = LOGO_WIDTH-LABEL_WIDTH;
private final static int TEXT_HEIGHT = 1;
private final static int BUTTON_WIDTH = 1;
private final static int BUTTON_HEIGHT = 1;
private final static int LABEL_START_ROW = LABEL_HEIGHT+LABEL_WIDTH+1;
private final static int LABEL_COLUMN = 0;
private final static int TEXT_START_ROW = LABEL_START_ROW;
private final static int TEXT_COLUMN = LABEL_WIDTH+1;
private final static int BUTTON_START_ROW = LABEL_START_ROW+9*LABEL_HEIGHT;
private final static int BUTTON_COLUMN = LABEL_COLUMN;
private final static int SEARCH_START_ROW = BUTTON_START_ROW+3;
final static String EMPTY_ARRAY_MESSAGE = "Hit ADD to add a new PRODUCT";
//Constructor-New instance of the JLabelTextFieldView.
public FinalInventoryGUI( Product productsIn)
{//Passing the frame title to JFrame, set the IconImage.
super("Welcome To The Inventory Program");
setLayout(layout);
//Copy the input array(products).
setProduct(productsIn);//maybe the title?????
//Start the display with the first element of the array.
index = 0;
//Build the GUI
buildGUI();
//Values
updateAllTextFields();
}//End of the constructor for building the GUI.
//Methods for copying the input of Product array to the GUIs private array
//variable
private void setInventoryArray(Product productsIn[])
products = new Product[productIn.length];
for (int i = 0; i<products.length; i++)
{//Creates A Product array element from the input array.
prodcuts[i] = new Product(productIn);
products[i] = new Product(productIn[i].productName(), productIn[i].itemNumber(),
productIn[i].unitStock(), productIn[i].unitPrice());
//System prints out a ineof the productsIn array to a string.
}//End of the for statment.
}//End for copying the array.
//A method for updating each of the GUIs fields.
private void updateAllTextFields()
if(products.length > 0)//Then update the JTextField display.
{// Update the product name text field.
productNameText.setText(products[index].productName());
//Update the Update the itemNumber text field.
itemNumberText.set(String.format("%d", products[index].itemNumber()));
//Update the title text field.
titleText.setText(dvd[index].title());
//Update the unitStock text field.
unitStockText.setText(String.format("%d",products[index].unitStock()));
//Update the unit price textField.
unitPriceText.setText(String.format("$%.2f",products[index].unitPrice()));
//Update the productValue textField.
productValueText.setText(String.format("$%.2f", products[index].productValue()));
//Update the restocking fee text field.
reStkfeeText.setText(String.format("$%.2f",reStkfee()));
//Update the total value of the inventory text field.
inventoryValueText.setText(String.formtat("$%.2f",Product.productValue(products)));
}//End of the if statement.
else//Put a special message in the fields.
{//Update the productName textField.
productNameText.setText(EMPTY_ARRAY_MESSAGE);
//Update the itemNumber textField
itemNumberText.setText(EMPTY_ARRAY_MESSAGE);
//Update the title textField.
titleText.setText(EMPTY_ARRAY_MESSAGE);
//Update the units in stock textField.
unitStockText.setText(EMPTY_ARRAY_MESSAGE);
//Update the unitPrice textFied.
unitPriceText.setText(EMPTY_ARRAY_MESSAGE);
//Update the productValue textField.
productValueText.setText(EMPTY_ARRAY_MESSAGE);
//Update the restocking fee textField.
reStkfeeText.setText(EMPTY_ARRAY_MESSAGE);
//Update the totatl inventoryValue textField.
inventoryValueText.setText(EMPTY_ARRAY_MESSAGE);
}//End else
}//Set the appropriate fields editable or uneditable.
private void setModifiableTextFieldsEnabled(Boolean state)
{//The fields of the product name, item number, unit price,
// and stock can be editable or non editable.
itemNumber.setEditable(state);
productName.setEditable(state);
unitPrice.setEditable(state);
unitStock.setEditable(state);
}//End setting of the modifiable textFields.
//Methods for the JButton methods.
private class ButtonHandler implements ActionListener
public void actionPerformed(ActionEvent event)
{//This is the first button being pressed by the user.
if(event.getSource()==firstButton)
handleFirstButton();
}//End if
else if(event.getSource()==previousButton)//Button previous is pressed by user.
handlePreviousButton();
}//End else if
else if (event.getSource()==nextButton)//Button next is pressed by user.
handleNextButton();
}//End else if.
else if (event.getSource()==lastButton)//Button last is pressed by the user.
handleLastButton();
}//End else if.
else if(event.getSource()==firstButton)
handleFirstButton();
}//End else if.
}//End metod of actionPeformed.
}//End class ButtonHandler
//Displaying the first element of the Product array
private void handlerFirstButton()
{//Setting the index to the first element in the array.
index = 0;
//Update and disable modification
updateAllFields();
setModifiableTextFieldsEnabled(false);
}//End method for handling the first button.
//Displaying the next element of the products array or wrap to the first.
private void handleNextButton()
{//Incrementation of the index.
index++;
//If the index exceeds the last valid array element, wrap around to the first
//element of the array.
if(index > products.length-1)
index = 0;
}//End if statment.
//Update and disable the modification.
updateAllFields();
setModifiableTextFieldsEnabled(false);
}//End method of handleNextButton.
private void handlePreviousButton()
index--;
if(index < 0)
index = products.length -1;
}//End if statment.
//Update and disabe modification.
updateAllTextFields();
setModifiableTextFieldsEnabled(false);
}//End method of handlePreviousButton.
private void handleLastButton()
index--;
if(index < products.length -1)
index = 2;
}//End if statment.
updateAllTextFields();
setMdifiableTextFieldsEnabled(false);
}//End method for handleLatButton
//The textFieldHandler class - handling the events of the buttonsmethods
private class TextFieldHandler implements ActionListener
public void actionPerformed(ActionEvent event)
{//The user pressed "ENTER" in the JTextField "title" text.
if(event.getSource() == itemNumber)
//HandleItemNumberTextField()is fired.
}//End the if statement.
//The user pressed "ENTER" in the JTextField "title" text.
else if (event.getSource() == titleText)
//HandleTitleTextField() is fired.
}//End the if statement.
//The user pressed "ENTER" in the JTextField "unitStoc" text.
else if(event.getSource() == unitStockText)
//HandleUnitStockTextField() is fired.
}//End the if statment
//The user pressed "ENTER" in the JtextField "unitPrice" text.
else if (event.getSource() == unitPriceText)
//HandleUnitPriceTextField() is fired.
}//End the if statment.
//The user pressed "ENTER" in the JTextField "Search" text.
else if(event.getSource() == searchText)
//HandleSearchTextField() is fired.
}//End the if statment.
}//End the method actionPerformed.
}//End the inner class TextFieldhandler.
//The GUI methods.
//Building the GUI.
private void BuildGUI()
{//Mthod for adding the LOGO.
buildLogo();
//Add the text fields and their labels.
buildLabels();
buildTextFields();
//Add the navigation and other buttons.
buildMainButtons();
//Provide value to the Fields.
updateAllTextFields();
//provide some setup to the frame.
setSize(FRAME_LENGTH, FRAME_WIDTH);
setLocation(FRAME-XLOC, FRAME_YLOC);
setResizable(false);
//PACK(); IS THIS NOT PART OF THE GUI ADDED AT THE END OR IS WHAT
//FOLLOWS THE SAME AS SAYING ".PACK()".
setDefaultCloseOperation(EXIT_ON_CLOSE);//DOES IT MATTER WHERE THIS LINE FALLS?
//WHEN I TRIED TO USE IT IN THE MAIN I RECEIVED AN ERROR AND THE SAME WHEN I
//PLACED IT IN THE CONSTRUCTOR--WHY?.
setVisible(true);
}//End of building the GUI.
//Addin the LOGO to the Frame.
private void buildLogo()
constraints.weightx = 2;
constraints.weigthy = 1;
logoLabel = new JLabel(new ImageIcon("O2K.jpg"));
logoLabel.setText("Products Inventory");
constraints.fill = GridBagConstraints.BOTH;
addToGridbag(logoLabel,2,2,LOGO_WIDTH, LOGO_HEIGHT);
//Creating a vertical space.
addToGridBag(new JLabel(""),LOGO_HEIGHT+1,0, LOGO_WIDTH, LABEL_WIDTH);
}//End the method with building the LOGO.
//Build the panel just containing the text.
private void buildLabels()
{//Set up if for readability).
int rows = 0;
int column = 0;
int width = 0;
int height = 0;
column = LABEL_COLUMN;
width = LABEL_WIDTH;
height = LABEL_HEIGHT;
constraints.weightx = 1;
constraints.weighty = 0;
constraints.fill = GridbagConstraints.Both;
//Create the name labes and name the TextFields.
productNameLabel = new JLabel("Product Name:");
productnamelabel.setLabelfor(productNameField);
productNameLabel.setLabelFor(productNameText);
productNameLabel.setToolTipText("Enter The Product Name Here");
row = Label_START_ROW;
addToGridBag(productNameLabel, row, column, width, height);
//Create the itemNumberLabel and TextField.
itemNumberLabel = new JLabel("Product Id:");
itemNumberLabel.setLabelFor(itemNumberText);
row += LABEL_HEIGHT;
addToGridBag(itemNumber, row, column, width, height);
//Create the title label for the Product and the title text field.
titleLabel = new JLabel("Inventory Of Products:");
titleLabel.setLabelFor(titleText);
row += LABEL_HEIGHT;
addToGridBag(titleLabel,row,column,width,height);
//Create the unitStock label and textField.
unitStockLabel = new JLabel("Units In Stock:");
unitStockLabel.setLabelFor(unitStockLabel);
row += LABEL_HEIGHT;
addToGridBag(unitStocklabel, row, column, height);
//Creat the unitPrice label and textField.
unitPriceLabel = new JLabel("Unit Price");
unitPriceLabel.setLabelFor(unitPriceLabel);
unitPriceLabel.setToolTipText("The Cost Of The Product");
row += LABEL_HEIGHT;
addToGridBag(unitPriceLabel, row, column, height);
//Create the productValue label and textField.
productValueLabel = new JLabel("Total Product Value:");
productValueLabel.setLabelFor(productValueLabel);
row += LABEL_HEIGHT;
addToGridBag(productValue, row, column, height);
//Create the restocking fee of 1.05% Label and textField.
reStkfeeLabel = new JLabel("Product Restock Fee:");
reStkfeeLabel.setLabelFor(reStkfeeLabel);
row+= LABEL_HEIGHT;
addToGridBag(reStkfee, row, column, height);
//Create a vertical space.
row += LABEL_HEIGHT;
//Create the Total Inventory Value label and textField.
inventoryValueLabel = new JLabel("Total Inventory Value:");
inventoryValueLabel.setLabelFor(inventoryValueLabel);
row += LABEL_HEIGHT;
addToGridBag(inventoryValue, row, column, height);
}//End the method for building the labels
//Build the methods for the TextFields.
private void buildTextFields()
{//Defining the variables
int row = 0;
int column = 0;
int width = 0;
int height = 0;
column = TEXT_COLUMN;
width = TEXT_WIDTH;
height = TEXT_HEIGHT;
constraints.fill = GridBagConstraints.BOTH;
constraints.weightx = 1;
TextFieldHandler handler = new TextFieldHandler();
productNameText = new JTextField("Product Name");
productNameText.setEditable(false);
row = TEXT_START_ROW;
addToGridBag(productNameText, row, column, height);
itemNumberText = new JTextField("Product Id");
itemNumberText.setEditable(false);
row = TEXT_START_ROW;
addToGridBag(itemNumberText, row, column, height);
titleText = new JTextField("Title");
titleText.addActionListener(handler);
titleText.setEditable(false);
row += TEXT_HEIGHT;
addToGridBag(titleText, row, column, height);
unitPriceText = new JTextField("Unit Price");
unitPriceText.addActionListener(handler);
unitPrice.setEditable(false);
row += TEXT_START_ROW;
addToGridBag(unitPriceText, row, column, height);
unitStockText = new JTextField("Units In Stock");
unitStockText.addActionListener(handler);
unitStockText.setEditable(false);
row += TEXT_START_ROW;
addToGridBag(unitStockText, row, column, height);
productValueText =new TextField("Product Value");
productValueText.addActionListener(handler);
productValueText.setEditable(false);
row += TEXT_START_ROW;
addToGridBag(productValueText, row, cloumn, height);
reStkfeeText =new JTextField("Restock Fee");
reStkfeeText.addActionListener(handler);
reStkfeeText.setEditable(false);
row += TEXT_START_ROW;
addToGridBag(reStkfeeText, row, cloumn, height);
//Creat vertical space.
row += TEXT_HEIGHT;
addToGridBag(new JLabel(""),row, column, height);
inventoryValueText =new TextField("Inventory Value");
inventoryValueText.addActionListener(handler);
inventoryValueText.setEditable(false);
row += TEXT_START_ROW;
addToGridBag(inventoryValueText, row, cloumn, height);
}//End the methods for building the TextFields.
//Add the main buttons to the frame.
private void buildMainButtons()
{//Declaraing the variables.
int row = 0;
int column = 0;
int width = 0;
int height = 0;
row =BUTTON_START_ROW;
column = BUTTON_COLUMN;
width = BUTTON_WIDTH;
height = BUTTON_HEIGHT;
constraints.weightx = 1;
constraints.weighty = 0;
//The constraints.fill = GridBagConstraints.HORIZONTAL;
ButtonHandler handler = new ButtonHandler();
//Creat a veritical space.
addToGridbag(new JLabel(""), row, column, width, height);
firstButton = new JButton("First");
firstButton.addActionListener(handler);
row += LABEL_HEIGHT;
addToGridBage(firstButton, row, column, width, height);
previousButton = new JButton("Previous");
previousButton.addActionListener(handler);
row += LABEL_HEIGHT;
addToGridBage(previousButton, row, column, width, height);
nextButton = new JButton("Next");
nextButton.addActionListener(handler);
row += LABEL_HEIGHT;
addToGridBage(nextButton, row, column, width, height);
lastButton = new JButton("Last");
lastButton.addActionListener(handler);
row += LABEL_HEIGHT;
addToGridBage(lastButton, row, column, width, height);
addButton = new JButton("Add");
addButton.addActionListener(handler);
row += LABEL_HEIGHT;
addToGridBage(addButton, row, column, width, height);
deleteButton = new JButton("Delete");
deleteButton.addActionListener(handler);
row += LABEL_HEIGHT;
addToGridBage(deleteButton, row, column, width, height);
saveButton = new JButton("Save");
saveButton.addActionListener(handler);
row += LABEL_HEIGHT;
addToGridBage(saveButton, row, column, width, height);
searchButton = new JButton("Search");
searchButton.addActionListener(handler);
row += LABEL_HEIGHT;
addToGridBage(searchButton, row, column, width, height);
//End methods for building the main butt0ns.
private void addToGridBag(Component component, int row, int column, int width, int height)
{ //Set up the upper-left corner of the component gridx and gridy.
constraints.gridx = column;
constraints.gridy = row;
//Set the numbers of rows and columns the components occupies.
constraints.gridwidth = width;
constraints.gridheight = height;
//set the constraints
Layout.setConstraints(component, constraints);
//Add the component to the JFrame.
add(component);
}//End method for addGridBag.
//End class JLabelTextFieldViewGui.
class Invetnory4
public static void main(String args[])
{ //An array variable.
Product[]inventory;
inventory = new Product[10];
//Create and pass control to the GUI
FinalInventory gui = new FinaInventoryGUI(inventory);
}//End method main
}//End class Inventory4
/*Inventory.java*/
/*Means for importing program packages*/
/*Beginning of the class type Inventory*/Hi Bryan,
I took your advice and decided to take a different approach to the problem I am having, I decided to stay somewhat with the basics with little knowledge I have about coding. I am new to this and I am trying to learn through the fire but it's getting hot so if you don't mind, can you tell me what I need to do to fix the error messages I am getting.
1. "else" without "if',
2. can't load my icon-a JPG
3. exception in thread amin
process complete.
4.Text area for displaying an iteration of the input
the code is not as long as the other one! any help will be appreciated. Also I am attaching the code to the GUI that does work but I can not seem to get the actionListener aspect to work. Thanks again.
//this one works and it serves as a model for what I am //trying to do in the fields. as well as designate a text area //where a each entry per iteration of input is displayed
* @(#)InventoryGUIFrame.java
* @author
* @version 1.00 2008/2/2
package components;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import javax.swing.ImageIcon;
import javax.swing.event.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
import java.text.*;
import java.awt.*;
* FormattedTextFieldDemo.java requires no other files.
* It implements a mortgage calculator that uses four
* JFormattedTextFields.
public class InventoryGUIFrame extends JFrame
String productName;
String itemNumber;
double unitPrice;
double unitStock;
//Labels to identify the fields
private JLabel productNamelabel;
private JLabel itemNumberlabel;
private JLabel unitPricelabel;
private JLabel unitStocklabel;
//Fields for data Entry
private JTextField productNameField;
private JTextField itemNumberField;
private JTextField unitPriceField;
private JTextField unitStockField;
//Adding the JButtons
JButton firstButton;
JButton nextButton;
JButton previousButton;
JButton searchButton;
JButton addButton;
JButton deleteButton;
JButton saveButton;
//Constructor
public InventoryGUIFrame()
super("Welcome To The Inventory Program");
setLayout(new FlowLayout());
setDefaultCloseOperation(EXIT_ON_CLOSE);
JFrame Frame = new JFrame();
Frame JPanel = new Frame();
JPanel JLabel= new JPanel();
TextArea area = new TextArea();
productNamelabel = new JLabel("PRODUCT NAME");
productNamelabel.setToolTipText("Name of the item you wish to calculate");
add(productNamelabel);
productNameField= new JTextField(8);
add(productNameField);
itemNumberlabel = new JLabel("PRODUCT NUMBER");
itemNumberlabel.setToolTipText("Number identifying the product");
add(itemNumberlabel);
itemNumberField =new JTextField(5);
add(itemNumberField);
unitPricelabel=new JLabel("PRODUCT PRICE");
unitPricelabel.setToolTipText("What is the cost of the product?:");
add(unitPricelabel);
unitPriceField = new JTextField(5);
add(unitPriceField);
unitStocklabel = new JLabel("UNITS IN STOCK");
unitStocklabel.setToolTipText("How many products in inventory?:");
add(unitStocklabel);
unitStockField = new JTextField(5);
add(unitStockField);
firstButton =new JButton("First");
add(firstButton);
nextButton = new JButton("Next");
add(nextButton);
previousButton = new JButton("Previous");
add(previousButton);
addButton = new JButton("Add");
add(addButton);
deleteButton = new JButton("Delete");
add(deleteButton);
saveButton = new JButton("Save");
add(saveButton);
searchButton = new JButton("Search");
add(searchButton);
public static void main(String args[])
InventoryGUIFrame frame = new InventoryGUIFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setSize(740,150);
frame.setVisible(true);
class InventorySystem6
{ /*Declaration of products[] and the maximum storing capacity*/
private Product products[] = new Product[MAX_NUM_OF_PRODUCTS];
/*Prompts user to make another selection or exit program*/
private static final String STOP_COMMAND = "stop";
/*parameters defining maximun numbers of products available for storing in */
private static final int MAX_NUM_OF_PRODUCTS = 100;
/*Declaration of the variables */
String name;
String item;
double stock;
double price;
double reStkfee=1.05;
double pValue;
double iValue;
public InventorySystem6()
/*Empty Constructor*/
}/*Beginning of product input by the user*/
public void inputProductInfo()
{ /*Declaration of currency format*/
DecimalFormat Currency = new DecimalFormat();
Scanner input = new Scanner(System.in);
/*Beginning of the Loop*/
JOptionPane.showMessageDialog(null,"Welcome to the Inventory Program\n","Welcome to the Inventory Program\n",
JOptionPane.PLAIN_MESSAGE);
for(int i = 0; i<MAX_NUM_OF_PRODUCTS ; i++)
name = JOptionPane.showInputDialog( "What is the Product Name? ");
if(name.equalsIgnoreCase("stop"))
break;
String item = JOptionPane.showInputDialog("Enter the products ID");
String priceStr =JOptionPane.showInputDialog("Enter the products price");
double price=Double.parseDouble(priceStr);
String stockStr=JOptionPane.showInputDialog("Enter the units in stock " );
double stock = Double.parseDouble(stockStr);
double sum=price*stock;
JOptionPane.showMessageDialog(null,"The product value is:"+sum, "pValue",
JOptionPane.PLAIN_MESSAGE);
/* JOptionPane.showMessageDialog(null,"The Product Name is:"+productName, "productName"
,"\n","The Product Id is "+productId,"Product ID"
,"\n","The Unit Price is"+unitPrice,"Unit Price"
,"\n","The Units In Stock is"+unitStock,"UnitStock"
,"\n","The Product Value is"+productValue, "productValue"
,"\n","The Restocking Fee is "+reStockfee,"Restock Fee"
,"\n","The Inventory Value is"+inventoryValue,"Inventory Value"
,"\n","The Inventory Restock Fee is"+reStockfee,"Restock Fee"
,"\n",JOptionPane.PLAIN_MESSAGE);*/
//Product products[] = new Product[100];
products[i] = new Product();
products[i].setitem(item);
products[i].setname(name);
products[i].setprice(price);
products[i].setstock(stock);
products[i].setpValue(sum);
products[i].setreStkfee(reStkfee);
iValue += sum + products[i].getreStkfee();
public void displayProductInfo()
{ /*Initialization of the variable total inventory value*/
NumberFormat moneyFormat = NumberFormat.getCurrencyInstance();
for(int i = 0; i<MAX_NUM_OF_PRODUCTS ; i++)
Product product = products[i];
if(product==null)
System.out.println(products[i]);
break;
System.out.printf("product name: %s\n ", product.getname());
System.out.printf("product ID: %s \n", product.getitem());
System.out.printf("Unit Price: %s \n", moneyFormat.format(product.getprice()));
System.out.printf("units in Stock: %s \n", product.getstock());
System.out.printf("Total product Value: %s \n", moneyFormat.format(product.getpValue()));
System.out.printf("Restocking fee: %s \n", moneyFormat.format(product.getreStkfee()));
System.out.printf("Inventory Value: %s \n", iValue);
}/*Beginning of method main*/
public static void main(String[] args)
{/*Message*/
/*Means for retrieving and storing new data input into inventory program*/
InventorySystem6 JTableImageCreator = new InventorySystem6();
JTableImageCreator.displayProductInfo();
JTableImageCreator.inputProductInfo();
class Product
/*Declaration of and default value of specified variables*/
//private Product products[] = new Product[100];
private String item;
String name;
private double stock;
private double price;
private double pValue;
private double reStkfee;
//private String productNames[] = new String[1000]; //declaration of array "productNames" to store Product Names
private double iValue;
/*method defining the get and set values of each individual variable*/
public String getname()
{/*Mean for storing and retrieving input of name*/
return name;
}/*Means for setting the product name*/
public void setname(String name)
{/*null pointer argument exception defining metod for obtainng product name*/
this.name = name;
}/*Means for getting the units identifcation number inputted by the user*/
public String getitem()
{/*Means for returning the user input*/
return item;
}/*Means for setting the units identifcation */
public void setitem(String item)
{/*null pointer argument exception for setting the product identification number*/
this.item = item;
}/*Means for getting the units value input*/
public double getstock()
{/*Means for returning the variable of the units*/
return stock;
}/*Means for setting the units value*/
public void setstock(double stock)
this.stock = stock;
public double getprice()
{/*Means for returning the dollar value of the price of the unit(s)*/
return price;
}/*Means for setting and requesting user to input + dollar amt*/
public void setprice(double price)
this.price = price ;
}/*Means for setting the value of the total product value*/
public void setpValue(double pValue)
this.pValue = pValue+(price*stock);
}/*Means for getting the value of the product*/
public double getpValue()
{/*Means for returning the value*/
return pValue;
}/*Means for getting the TtlInventoryValue of products entered*/
public void setiValue(double iValue)
{/*Condition Statement*/
this.iValue=iValue;
public double getiValue()
return iValue;
public void setreStkfee(double reStkfee)
this.reStkfee=stock*price*1.05;
/*Means for setting restockin fee of the total products*/
public double getreStkfee()
{/*Means for calculating the restocking fee of each products units nStock*/
return reStkfee;
}/*Method for string the elements in [i] for display*/
public String toString()
{/*Means for returning defined string of elements in [i]*/
return "Product{" +
"item="+ item +
", name="+ name +
", stock="+ stock +
", price="+price +
", pValue="+pValue +
", reStkfee="+ reStkfee +
", iValue="+iValue+
}/*End set and get method*/
}/*End of class Product*/
/*Delcaration of the class type sortproductNames*/
class sortproductNames extends Product
{/*Declaration of the variable productName*/
protected String name;
/*Means for setting and getting values of the variable productName*/
public void setname(String name)
this.name = name;
public String getname()
return name;
public int compareTo(Object object)
{ // for sorting by product name
Product anotherProduct = (Product) object;
return name.compareTo( anotherProduct.name);
g.drawImage(image,0,0,200,50,0,0,image.getWidth(null), image.getHeight(null),null);
else;
g.drawString("O2K", 10,10);
* @(#)InventoryGUIFrame.java
* @author
* @version 1.00 2008/2/2
package components;
import java.io.*;
import java.awt.font.*;
import java.awt.geom.*;
import java.awt.image.*;
import javax.imagio.*;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import javax.swing.ImageIcon;
import javax.swing.event.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
import java.text.*;
import java.awt.*;
* FormattedTextFieldDemo.java requires no other files.
* It implements a mortgage calculator that uses four
* JFormattedTextFields.
public class InventoryGUIPanelFrameTextArea extends JFrame
String productName;
String itemNumber;
double unitPrice;
double unitStock;
//Labels to identify the fields
private JLabel productNamelabel;
private JLabel itemNumberlabel;
private JLabel unitPricelabel;
private JLabel unitStocklabel;
//Fields for data Entry
private JTextField productNameField;
private JTextField itemNumberField;
private JTextField unitPriceField;
private JTextField unitStockField;
private Product[] products;
private int unitStock;
private int currentIndex=0;
//Adding the JButtons
JButton firstButton;
JButton nextButton;
JButton previousButton;
JButton searchButton;
JButton addButton;
JButton deleteButton;
JButton saveButton;
//Constructor
public InventoryGUIPanelFrameTextArea()
super("Welcome To The Inventory Program");
this.products = products;
this.numOfProducts = products;
JFrame JPanel = new JFrame();
setDefaultCloseOperation(EXIT_ON_CLOSE);
setLayout(new GridLayout());
showLogo();
showLabels();
showInputFields();
showButtons();
public void showLogo()
O2K myLogo = new O2K();
this.add(myLogo);
public void showLabels()
JPanel panel = new JPanel();
panel.add(new JLabel("PRODUCT NAME"));
panel.add(new JLabel("ITEM NUMBER"));
panel.add(new JLabel("UNIT PRICE"));
panel.add(new JLabel("UNITS IN STOCK"));
this.add(panel);
public void showInputFields()
itemNumber =new JTextField(5);
itemNumber.setEditable(false);
productName= new JTextField(10);
productName.setEditable(false);
unitPrice= new JTextField(5);
unitPrice.setEditable(false);
unitStock = new JTextField(10);
unitStock.setEditable(false);
panel.setEditable(false);
panel.add(itemNumber);
panel.add(productName);
panel.add(unitPrice);
panel.add(unitStock);
this.add(panel);
public void showButtons()
JPanel panel = new JPanel();
first = new JButton("First");
next = new JButton("Next");
previous = new JButton("Previous");
add = new JButton ("Add");
delete = new JButton ("Delete");
search = new JButton ("Search");
save = new JButton ("Save");
panel.add(first);
panel.add(next);
panel.add(previous);
panel.add(add);
panel.add(delete);
panel.add(search);
panel.add(save);
panel.add(this);
ButtonActionHandler handler = new ButtonActionHandler();
first.addActionListener(handler);
next.addActionListener(handler);
previous.addActionListener(handler);
add.addActionListener(handler);
delete.addActionListener(handler);
search.addActionListener(handler);
save.addActinListener(handler);
this.add(panel);
setFields(0);
protected void paintComponent (Graphics g)
public void setFields(int i)
setItemNumber(i);
setProductName(i);
setUnitPrice(i);
setUnitStock(i);
public void setItemNumber( int i)
itemNumber.setText(products[i].getItemNumber());
public void setProductName(int i)
productname.setText(products[i].getProductName());
public void setUnitPrice( int i)
unitPrice.setText(String.valueOf(products[i].getunitPrice()));
public void setUnitStock(int i)
unitStock.setText(String.valueOf(products[i].getunitStock()));
private class ButtonActionHandler implements ActionListener
public void actionPerformed(ActionEvent event)
if(event.getSource()==first)
currentIndex=0;
setFields(currentIndex);
else if(event.getSource()==next)
currentIndex++;
if(currentIndex==unitStock);
currentIndex--;
setFields(currentIndex);
else if (event.getSource()==previous)
currentIndex--;
if(curentIndex < 0)
currentIndex=0;
setFields(currentIndex);
else if(event.getSource()==last)
currentIndex = unitStock -1;
setFields(currentIndex);
else if(event.getSource()==add)
currentIndex = productName ++;
setFields(currentIndex);
else if(event.getSource()==delete)
currentIndex= productName -1;
setFields(currentIndex);
else if (event.getSource()==search)
currentIndex=productName ++;
setFields(currentIndex);
else if (event.getSource()==save)
currentIndex=productName ++;
setFields(currentIndex);
public static void main(String args[])
JFrame mainFrame = new JFrame();
mainFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
mainFrame.setSize(400,300);
mainFrame.setVisible(true);
class InventorySystem6
{ /*Declaration of products[] and the maximum storing capacity*/
private Product products[] = new Product[MAX_NUM_OF_PRODUCTS];
/*Prompts user to make another selection or exit program*/
private static final String STOP_COMMAND = "stop";
/*parameters defining maximun numbers of products available for storing in [i]*/
private static final int MAX_NUM_OF_PRODUCTS = 100;
/*Declaration of the variables */
String name;
String item;
double stock;
double price;
double reStkfee=1.05;
double pValue;
double iValue;
public InventorySystem6()
/*Empty Constructor*/
}/*Beginning of product input by the user*/
public void inputProductInfo()
{ /*Declaration of currency format*/
DecimalFormat Currency = new DecimalFormat();
Scanner input = new Scanner(System.in);
/*Beginning of the Loop*/
JOptionPane.showMessageDialog(null,"Welcome to the Inventory Program\n","Welcome to the Inventory Program\n",
JOptionPane.PLAIN_MESSAGE);
for(int i = 0; i<MAX_NUM_OF_PRODUCTS ; i++)
name = JOptionPane.showInputDialog( "What is the Product Name? ");
if(name.equalsIgnoreCase("stop"))
break;
String item = JOptionPane.showInputDialog("Enter the products ID");
String priceStr =JOptionPane.showInputDialog("Enter the products price");
double price=Double.parseDouble(priceStr);
String stockStr=JOptionPane.showInputDialog("Enter the units in stock " );
double stock = Double.parseDouble(stockStr);
double sum=price*stock;
JOptionPane.showMessageDialog(null,"The product value is:"+sum, "pValue",
JOptionPane.PLAIN_MESSAGE);
/* JOptionPane.showMessageDialog(null,"The Product Name is:"+productName, "productName"
,"\n","The Product Id is "+productId,"Product ID"
,"\n","The Unit Price is"+unitPrice,"Unit Price"
,"\n","The Units In Stock is"+unitStock,"UnitStock"
,"\n","The Product Value is"+productValue, "productValue"
,"\n","The Restocking Fee is "+reStockfee,"Restock Fee"
,"\n","The Inventory Value is"+inventoryValue,"Inventory Value"
,"\n","The Inventory Restock Fee is"+reStockfee,"Restock Fee"
,"\n",JOptionPane.PLAIN_MESSAGE);*/
//Product products[] = new Product[100];
products[i] = new Product();
products[i].setItemNumber(itemNumber);
products[i].setPrdocutName(productName);
products[i].setUnitPrice(unitPrice);
products[i].setUnitStock(unitStock);
products[i].setProductValue(sum);
products[i].setReStkfee(reStkfee);
inventoryValue += sum + products[i].getreStkfee();
public void displayProductInfo()
{ /*Initialization of the variable total inventory value*/
NumberFormat moneyFormat = NumberFormat.getCurrencyInstance();
for(int i = 0; i<MAX_NUM_OF_PRODUCTS ; i++)
Product product = products[i];
if(product==null)
System.out.println(products[i]);
break;
System.out.printf("product name: %s\n ", product.getproductName());
System.out.printf("product ID: %s \n", product.getitemNumber());
System.out.printf("Unit Price: %s \n", moneyFormat.format(product.getunitPrice()));
System.out.printf("units in Stock: %s \n", product.getunitStock());
System.out.printf("Total product Value: %s \n", moneyFormat.format(product.getproductValue()));
System.out.printf("Restocking fee: %s \n", moneyFormat.format(product.getreStkfee()));
System.out.printf("Inventory Value: %s \n", inventoryValue);
}/*Beginning of method main*/
public static void main(String[] args)
{/*Message*/
/*Means for retrieving and storing new data input into inventory program*/
InventorySystem6 JTableImageCreator = new InventorySystem6();
JTableImageCreator.displayProductInfo();
JTableImageCreator.inputProductInfo();
class Product
/*Declaration of and default value of specified variables*/
//private Product products[] = new Product[100];
protected String itemNumber;
protected String prodcutname;
protected double unitStock;
protected double unitPrice;
protected double productValue;
protected double reStkfee;
protected double inventoryValue;
//private String productNames[] = new String[1000]; //declaration of array "productNames" to store Product Names
/*method defining the get and set values of each individual variable*/
public String getproductName()
{/*Mean for storing and retrieving input of name*/
return productName;
}/*Means for setting the product name*/
public void setProductName(String productName)
{/*null pointer argument exception defining metod for obtainng product name*/
this.productName = ProductName;
}/*Means for getting the units identifcation number inputted by the user*/
public String getitemNumber()
{/*Means for returning the user input*/
return itemNumber;
}/*Means for setting the units identifcation */
public void setItemNumber(String itemNumber)
{/*null pointer argument exception for setting the product identification number*/
this.itemNumber = itemNumber;
}/*Means for getting the units value input*/
public double getunitStock()
{/*Means for returning the variable of the units*/
return unitStock;
}/*Means for setting the units value*/
public void setUnitStock(double unitStock)
this.unitStock = unitStock;
public double getunitPrice()
{/*Means for returning the dollar value of the price of the unit(s)*/
return unitPrice;
}/*Means for setting and requesting user to input + dollar amt*/
public void setUnitPrice(double unitPrice)
this.unitPrice = unitPrice ;
}/*Means for setting the value of the total product value*/
public void setProductValue(double prodcutValue)
this.prodcutValue = unitPrice*unitStock;
}/*Means for getting the value of the product*/
public double getproductValue()
{/*Means for returning the value*/
return productValue;
}/*Means for getting the TtlInventoryValue of products entered*/
public void setInvetnoryValue(double invetnoryValue)
{/*Condition Statement*/
this.inventoryValue=inventoryValue;
public double getinvetotyValue()
return productValue;
public void setReStkfee(double reStkfee)
this.reStkfee=stock*price*1.05;
/*Means for setting restockin fee of the total products*/
public double getreStkfee()
{/*Means for calculating the restocking fee of each products units nStock*/
return reStkfee;
}/*Method for string the elements in [i] for display*/
public String toString()
{/*Means for returning defined string of elements in [i]*/
return "Product{" +
"itemNumber="+ itemNumber +
", productName="+ productName +
", unitStock="+ unitStock +
", unitPrice="+unitPrice +
", productValue="+prodcutValue +
", reStkfee="+ reStkfee +
", inventoryValue="+inventoryValue+
}/*End set and get method*/
}/*End of class Product*/
/*Delcaration of the class type sortproductNames*/
class sortproductNames extends Product
{/*Declaration of the variable productName*/
protected String name;
/*Means for setting and getting values of the variable productName*/
public void setProdcutName(String productName)
this.productName = productName;
public String getproductName()
return productName;
public int compareTo(Object object)
{ // for sorting by product name
Product anotherProduct = (Product) object;
return productName.compareTo( anotherProduct.productName);
class myGraphics extends component
private BufferedImage image;
private boolean imageFound = true;
public myGraphics()
super();
try
image=ImageIO.read(new File("Logo.jpg"));
catch(IOException x)
x.printStackTrace();
imageFound = false;
public void paint(Graphics g)
g.drawImage(image,0,0,200,50,0,0,image.getWidth(null), image.getHeight(null),null);
else;
g.drawString("O2K", 10,10);
Maybe you are looking for
-
Windows Support Software download stuck
I'm trying to boot camp my Mac Book Air 13' 2011 which runs OS X Lion. I managed to partition my HD without a problem as well as install Windows 7 64 bit on it. However, when I went back to try to download the Windows Support Software using Boot Camp
-
Iphone keeps freezing when I am going to end a call.
My Iphone sometimes freezes when I make phone calls on it. This only happens at the end of the phone call but it is really frustrating because I cannot hang up the call. I called my service provider and they told me it was because of the clear screen
-
Is there any way to deal with an iPad 2 whose "shake" sensor is too sensitive? Simply typing on it is enough to trigger a "shake" response which undos what you just typed. I am not asking about how to disable the shake sensor, but how to adjust it to
-
Hello, I am wanting to know if there are any schools out there that teach the art and techniques of color correcting. I know about the apple training classes, but I feel they just teach the functionality of color. If anybody could point me in the rig
-
How do I get read & delivery receipts for messages?
How do I get delivery & read receipts for messages?