WAAS recovery CD (v 4.0.17.14) download help?

I need WAAS recovery CD (v 4.0.17.14) asap, but I don't have access privileges for downloading. We are in lack of time (Reseller would send in a few days and that's late). Any help?
http://tools.cisco.com/search/display?url=http%3A%2F%2Fwww.cisco.com%2Fcgi-bin%2FSoftware%2FTablebuild%2Fdoftp.pl%3Fftpfile%3D%2Fcisco%2Fcrypto%2F3DES%2Fcontent-delivery%2Fwaas%2F4.0%2FWAAS-4.0.17.14-rescue-cdrom-K9.iso&pos=5&strqueryid=1&websessionid=ChvImrvSYJcH_OkiufyVKRH

Dejan,
Were you able to get a copy of the image?
Regards,
Zach

Similar Messages

  • Hi, i had to restore my ipod 5G and it says its in recovery mode and its saying ipod software downloading but when its done it says it timed out i tried like 5 times what should i do

    hi, i had to restore my ipod 5G and it says its in recovery mode and its saying ipod software downloading but when its done it says it timed out i tried like 5 times what should i do

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • My iphone 3gs is in recovery mode how do i activate it please help. it shows the message your iphone couldnot be activated because the activation server is temporarily deactivated.

    my iphone 3gs is in recovery mode how do i activate it please help. it shows the message your iphone couldnot be activated because the activation server is temporarily deactivated.

    This usually happens if the phone has been Hacked / Jailbroken / Modified...
    Is this the case...?

  • My ipod has itunes sync symbols up on front screen,it wont turn on and when i go to sync it to computer recovery mode is coming up? Can you help?

    my ipod has itunes sync symbols up on front screen,it wont turn on and when i go to sync it to computer recovery mode is coming up? Can you help?

    Connect the iOS device to your computer and restore via iTunes. The iPod will be erased. Place the iOS device in DFU mode. if necessary to allow the restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up    
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • IPad abruptly quit, started playing Gaga's Scheibe song and will not now show up in "Devices" on iTunes.  Keeps telling me it detects an iPad in Recovery mode. Cannot get past that.  Help!

    How do I recover the data on my iPad2?  It abruptly quit while I was shutting down and started playing Gaga's Scheibe from "Born this Way" -- it was not coming from My Music or iTunes.  I pressed both home key and side button to get it to stop and plugged it in to recharge.  The USB connector to iTures screen showed up and that's as far as I can go.  Had an appointment at the "genius bar" this morning and all they tell me is that they can "restore" which will not save any info I have.  The last backup I did was April 2013 (I know, very stupid of me).  iTunes does not recognize the device.  It's all greyed out and I get a window that says iTunes detected an iPad in Recovery mode.  That's as far as I can get.  I really don't want to lose any data.  Please help me.  Thank you.  Nancy

    You have no choice but to lose your data back to the last backup you made.
    Here's how to do the recovery.  Note you may have to try to get into recovery mode more than once to succeed:
    HT1808
    I'm sure next time, you'll be more vigilant about keeping current backups.

  • My iPod Touch is stuck in Recovery mode and would not respond. Please Help!

    Hi! I have an iPod Touch 2nd Generation 8GB. Yesterday, I tried to update to iOS 4.0 from 3.1.3 by way of shift-click restore because my iPod was jailbroken. When the restore process was about 95% done, I received a "Send Error Report" and in every time I do it whether if I am downgrading back to 3.1.2 or 3.1.3.
    My iPod touch is still stuck in DFU/Recovery mode. I tried using another of my USB cable, USB port, and computers but to no avail. I even reinstalled iTunes and I still get the same result.
    Please does anyone know how to fix this?

    Restoring and updating normally also produces the same result.

  • My ipod touch is stuck in recovery mode..i have tryed eveything,plz help

    i have tuned eveything off and back on . i tunes is still in recovery mode. the Ipod is either froze on the Apple or is on the connect to itunes screen...

    Did you try RecBoot, it's supposed to help get you out of recovery mode! I've tried it before....sometimes it works, sometimes it does not work...Hopefully in your case it does.
    http://jaxov.com/2010/11/download-recboot-1-3-for-windows-mac-os-x-linux/

  • My ipod 4g is in recovery mode but itunes wont restore it please help

    it is now a block after going in recovery mode as itunes wont recover it as it stopped in the middle of the process saying it cant find a file.

    This usually happens if the phone has been Hacked / Jailbroken / Modified...
    Is this the case...?

  • Recovery files out of pocket, can I download a zip or something?

    My daughter's Satellite s55-A5235 needed a new harddrive, it is still under warranty. I opted for the ship me the drive option and have it installed. She is home but we cannot find her file that has her drivers in it. We know it is out of pocket because it has her printer driver and others too. Is there a way to download a zip file? I am afraid to order the flash media as it may cross her/us in the mail as she heads back to university. Also, We are not wanting to pour money into a machine still under warranty.

    I think you're asking if there's a way to download a system recovery disc image. Unfortunately, that's not possible due to licensing restrictions. 
    As you may already know, the recovery media can be ordered at http://support.toshiba.com/repair. 
    Jim

  • I lost recovery and i don't have disc. please help me.

    I lost recovery and I don't have disc. Please help me solve this problem. My Lup Top name is HP G62-224CA the status is 
    OxcOOOOOOf

    Hi,
    You can order a new set from the following link (scroll down for other countries):
      http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00810334
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Dv6775us HP Backup and Recovery Manager software corrupted - can't find download

    I am getting an HP error message saying the HP Backup and Recovery Manager software has been corrupted and needs to be updated. For over an hour I have been frustrated trying to find where on this site to download a replacement of what was installed or an upgrade that would repair the problem.
    Can anyone point me to where I can get the software? Thanks.
    HP Pavilion dv6775us
    Vista Home Advanced

    Did you make a recovery disk set or usb recovery media?
    If you did, then you are in luck because  that is the software that can be used to reinstall the Recovery manager.
    The downside is that you will have to do a  factory image recovery to reinstall the software.  A recovery is a destructive process, unlike a Windows stystem restore. A recovery will mean that you  will needto save all of your data externally  to avoid losing it and reinstall all of your programs after the recovery is complete.
    Regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • System Recovery media does not support the computer. HELP!!!

    Ok problem here the recovery discs that were created do not work. And this is where I'm stuck.
    First the details. It's a DV7-6163CL Laptop with windows 7. The discs were created shortly after we got the computer. The reason we have to try and recover the computer is hard drive #1 failed and failed hard. Hard drive was replaced. Now after trying to use the recovery discs we get the error message after a few windows loading screens in Recovery Manger.
    "The system recovery media does not support this computer. You are not able to restore this computer with the media."
    Well Hp doesn't support his platform anymore due to its age.
    Is there anything I can do next to formatting the computer and getting a new OS?

    Many times this error is caused by missing info in BIOS. Can you enter BIOS-F10 at power on- and check for serial number,etc?
    Sometimes a new hdd requires prepping with Cyberlink Utility cd first. Download and Save the file. Once download is complete, put a blank cd in your drive and click the file to create a boot cd. Boot with this cd and wait until you get a green check mark indicating hdd is ready. Remove the cd , insert first Recovery Disk and restart the laptop.
    http://ftp.hp.com/pub/softlib/software11/COL32372/​pv-80183-1/sp44645.exe
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I lost recovery and i don't have disc. Help me,Please!

     1. Product Name and Number
    -HP pavilion g4-1016dx
    • How do I find my product name and number
    2. Operating System installed (if applicable)
    Windows 7 Home Premium 64 bit
    3. Error message (if any) 
    i lost recovery and i don't have disc
    This question was solved.
    View Solution.

    For a small fee you can order Recovery Media right from your Support page HERE
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I can't make Recovery on my notebook .... please help ?

    Hello , i am trying to install OS from recovery partition i have on my notebook , but when i press F11 at start up it's show me this error  File :\Boot\BCD status 0xc0000225.  failed to boot , so what i need to fix this problem , by the way last time i installed OS from recovery partition i mentioed before i made shrink to C partition to get more space on it .
     notebook 7030se , win 7 64bit

    Restart the computer and before Windows launch, press F10.  When a new screen comes up, press F9 to reset the BIOS back to default condition.  If this does not work, upon restarting the computer, press F2 to run the self diagnostic tests(hard drive, startup, memory...)  Good luck! 
    I am having problem with my labtop too.  It has a missing .DLL file and I don't have the system recovery disc.  The F11 recovery option did not fix the problem.

  • IPhone 3Gs is stuck on recovery mode. Error 14. I NEED HELP PLEASE!!!

    im kind of new to the iPhone and i put in my iPhone on my windows and itunes popped up saying i need to update my iPhone to the latest update and i pressed the "Download and Install" button,and it started to download and by the time it was restoring my iPhone it just stays stuck on recovery mode. And when i click the restore button, the same thing keeps happening. it says, "The iPhone could not be restored. An Unknown error occurred.(14)." PLEASE HELP ME.

    http://support.apple.com/kb/TS1275
    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • CVP 7.0.2 Abnormally disconnected with error code 38

    Hi all, We have an issue where when called from outbound, it is not possible to reach a certain number. It doesn't even play the dial tone. isdn debug is as follows : Feb 15 17:51:01.830: ISDN Se0/2/0:15 Q931: TX -> RELEASE pd = 8  callref = 0xE97B F

  • Scenario data seems to be deleted unknowingly.

    Hello, Last week I had to make "Loacation" dimension in database-A to be identical to database-B. I deleted all the children of "Location" dimension in database-A and then copy/pasted the children from database-B. I restructured and rebuilt the cube

  • How do I get 16x9 aspect ration on an external monitor?

    I'm connected to a huge monitor but can only choose resolutions that are 4x3 - and the monitor is 16x9. Is my VGA connection restricting it? Will the option become available if I use HDMI? I just haven't bought the connections yet, but would definite

  • Loans Mgt: per maturity different GL account needed

    Hello What is the technical solution (customizing) for the following requirement? For loans with a term / maturity < 1 year (field in the master data of the CML loan) the GL account for the asset/liability (depending on loan given/taken) is 1111 "Sho

  • What is wrong in the below block. Just trying to update after the fetch

    set serveroutput on; declare begin for i in ( select c1.part_number,c1.serial_number from components c1 where aircraft_code in ( select aircraft_code from aircraft_header_2 ah2 where ah2.current_aircraft_indicator <> 'Y' and trim(aircraft_code) is no