WAAS - Some connections optimized, some not (mostly PT In Progress)
Hello,
I have an issue with WAAS acceleration. I have two sites, each one has
a WAE apliance. I do the traffic redirection with WCCP v2. Topology
picture is attached. Between remote and central site there are two GRE
tunnels, Tunnel 31 is primary, Tunnel 22 is backup and used only if
primary is down. When acceleration between locations is correct,
the traffic routing for remote clients leads from LAN to remote R1 -
tunnel - central R1 and to servers and vice versa. A couple days ago,
the routing at the remote site was changed. Nowadays, the traffic leads from
servers to the client through central R1 - tunnel - remote R1 - remote R3
to LAN L3 switch. But after this switch, there is only one active way
between sites, no asymmetric routing. After some changes made in
network, acceleration does not work properly.
Approximately one thirth of the traffic is optimized, the rest is
passed-through by various reasons (mostly PT In Progress)
The list of active sessions is also attached.
I cannot figure out the reason of such behaviour. The traffic on both
sites is redirected correctly by WCCP. I do not know whether these
changes have something in common with occurrence of these errors in
acceleration. I suppose that the traffic which leads back to clients
through remotes R1 and R3 is redirected twice... Remotes R1/R2/R3 are
connected to remote WAE by common VLAN as you can notice at attached
picture.
When you have any idea what I should check or what might be the
problem in acceleration, I would be very grateful If you let me know.
Thank you in advance.
Jozef
Hi Rahul,
thank you for reply. GW for central WAE is WAE VLAN interface on central R1, GW for remote WAE is WAE VLAN interface on remote R1.
Here is some output about TCP flows and WCCP redirection on both WAEs.
remote-site#sh statistics filtering
Number of filtering tuples: 1337
Packets dropped due to ttl expiry: 0
Packets dropped due to bad route: 23
Syn packets dropped with our own id in the options: 0
Internal client syn packets dropped: 0
Syn packets received and dropped on estab. conn: 0
Syn-Ack packets received and dropped on estab. conn: 4
Syn packets dropped due to peer connection alive: 0
Syn-Ack packets dropped due to peer connection alive: 0
Packets recvd on in progress conn. and not handled: 0
Packets dropped due to peer connection alive: 1160
Packets dropped due to invalid TCP flags: 0
Packets dropped by FB packet input notifier: 0
Packets dropped by FB packet output notifier: 0
Number of errors by FB tuple create notifier: 0
Number of errors by FB tuple delete notifier: 0
Dropped WCCP GRE packets due to invalid WCCP service: 0
Dropped WCCP L2 packets due to invalid WCCP service: 0
remote-site#sh egress-methods
Intercept method : WCCP
TCP Promiscuous 61 :
WCCP negotiated return method : WCCP L2
Egress Method Egress Method
Destination Configured Used
any IP Forwarding IP Forwarding
TCP Promiscuous 62 :
WCCP negotiated return method : WCCP L2
Egress Method Egress Method
Destination Configured Used
any IP Forwarding IP Forwarding
Intercept method : Generic L2
Egress Method Egress Method
Destination Configured Used
any not configurable IP Forwarding
central-site#sh statistics filtering
Number of filtering tuples: 24949
Packets dropped due to ttl expiry: 0
Packets dropped due to bad route: 32
Syn packets dropped with our own id in the options: 0
Internal client syn packets dropped: 0
Syn packets received and dropped on estab. conn: 0
Syn-Ack packets received and dropped on estab. conn: 6
Syn packets dropped due to peer connection alive: 4
Syn-Ack packets dropped due to peer connection alive: 0
Packets recvd on in progress conn. and not handled: 0
Packets dropped due to peer connection alive: 97016
Packets dropped due to invalid TCP flags: 0
Packets dropped by FB packet input notifier: 0
Packets dropped by FB packet output notifier: 0
Number of errors by FB tuple create notifier: 0
Number of errors by FB tuple delete notifier: 0
Dropped WCCP GRE packets due to invalid WCCP service: 0
Dropped WCCP L2 packets due to invalid WCCP service: 0
central-site#sh egress-methods
Intercept method : WCCP
TCP Promiscuous 61 :
WCCP negotiated return method : WCCP GRE
Egress Method Egress Method
Destination Configured Used
any IP Forwarding IP Forwarding
TCP Promiscuous 62 :
WCCP negotiated return method : WCCP GRE
Egress Method Egress Method
Destination Configured Used
any IP Forwarding IP Forwarding
Intercept method : Generic L2
Egress Method Egress Method
Destination Configured Used
any not configurable IP Forwarding
Here is some output from both WAEs - optimized vs. pass-through from client network 10.6.4.*
remote-site#sh stat conn all | inc 10.6.4.
663960 10.6.4.53:4474 192.168.35.193:1521 0:21:5e:52:69:9c TDL
636806 10.6.4.90:1123 192.168.35.193:1521 0:21:5e:52:69:9c TDL
636978 10.6.4.65:3622 192.168.35.193:1521 0:21:5e:52:69:9c TDL
587296 10.6.4.55:2412 192.168.35.193:1521 0:21:5e:52:69:9c TDL
192.168.32.136:443 10.6.4.35:1955 N/A PT No Peer
10.6.4.35:1656 192.168.35.193:1521 N/A PT In Progress
10.6.4.35:1955 192.168.32.136:443 N/A PT No Peer
192.168.35.193:1521 10.6.4.35:1656 N/A PT In Progress
192.168.35.194:1521 10.6.4.109:1200 N/A PT In Progress
10.6.4.109:1200 192.168.35.194:1521 N/A PT In Progress
central-ste#sh stat conn all | inc 10.6.4.
662729 10.6.4.53:4474 192.168.35.193:1521 0:21:5e:52:6a:88 TDL
635401 10.6.4.90:1123 192.168.35.193:1521 0:21:5e:52:6a:88 TDL
635573 10.6.4.65:3622 192.168.35.193:1521 0:21:5e:52:6a:88 TDL
585929 10.6.4.55:2412 192.168.35.193:1521 0:21:5e:52:6a:88 TDL
10.6.4.35:1656 192.168.35.193:1521 N/A PT In Progress
10.6.4.35:1921 192.168.32.136:443 N/A PT Rjct Resources
192.168.35.193:1521 10.6.4.35:1656 N/A PT In Progress
192.168.32.136:443 10.6.4.35:1921 N/A PT Rjct Resources
192.168.35.194:1521 10.6.4.109:1200 N/A PT In Progress
10.6.4.109:1200 192.168.35.194:1521 N/A PT In Progress
Similar Messages
-
hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls help
At the very least, I recommend you restart your router, (your internet box).
More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it? Did you do anything to change your setup, and if you did, what? -
I replaced my iPad with a new one. I backed up to iCloud but did not do a physical iTune Sync. Now I am having trouble recovering some Notes and Photos. I have been reinstalling Apps from the App Store. How do I recover my Notes?
Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone -
Some notes lost, some notes duplicate
Hi,
i have a problem with my iCloud notes. I sync them via iCloud between my Mac, IPad and IPhone. From time to time i get some duplicate notes with different dates. On each device it is different.
As i cleaned up the Notes i deleted the oldest Version and everything was fine.
Now after a clean Install of Mountain Lion on my Mac some Notes are lost. They were deleted on all devices.
Is there any chance to recover them from my last TimeMachine backup ? Im sure they are also stored local (maybe only temprary) on the Mac.
q
Best Regards
MarcoThanks for this File Path, but....
/Users/USERNAME/Library/Containers/com.apple.Notes/Data/Library/Notes
even the Notes are stored in the iCloud.
I replaced it with the one from my TimeMachine backup and i got back my BBQ Recipes...phewww
Hope it helps someone..
The Problem is that There Is No Way to Recover an Individual Note or a Group of Notes! It's All Or Nothing!!! I.e. Let's say:
I Accidentally Deleted a Note at 3 PM.
My Most Recent Time Machine Backup was at 1 PM on the same day!
If Restore that Notes Folder from Time Machine, I might get a 2 hours Old Version of the Note that I've Deleted at 3 PM, but I would lose all Other Updates that have occured between 1-3 PM, like
Changes to Other Notes
New Notes
This Problem becomes a lot worse when the Time Frame gets wider! I.E change 1-3 PM to 1-3 Days, Weeks, Months!!!
Apple has to provide us with a Safety Net, like Deleted Notes Folder, ala Mail, iPhoto! Then we can set to Empty that Folder to 30-60-90 Days, or Never!
One should be able to Restore a Single Note or a Group of Notes as easily as Deleted Contacts!
I love having my Notes on Mac, iPad and iPhone, but the lack of such Basic Recovery Option is bad particularly if one is to Trust iCloud for some Important Stuff!!!
I've spoken to some nice folks at Apple Care, and they are looking into this, but so far they haven't offered a solution! I am eagerly awaiting their response and any Feedback here! Thanks In Advance! -
Problems downloading apps ! some not all !
I am having trouble downloading some not all apps for my i pad both paid and free ones.Most of them are working fine but some just appear for 1 sec say waiting then disappear.Any ideas chaps?
ThanksWi Fi is much better for down loading apps, is that what you are using ? Also if you are having problems you could try a reset of the iPad .
-
My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?
Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS -
iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.
If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.
-
CSS (some, not all) not showing up in browser, but fine in DW. Plus other desperate issues....
I would really appreciate any and all help I can get to solve these problems as I'm new to CSS/HTML (completely new) and have been attempting to code my design just well enough to get it uploaded and working as a site. Once I can atleast achieve this feat, I plan on completely converting to CSS. But for now, I need to get the site working and I really didn't want to come and bother all of you on here with my problems and have been procrastinating posting on here for absolutely ages now....but since I can't figure all of the messy-uppy ness going on on my own, I beg forgiveness for any of your time wasted on my problems .
Okay, so the "main" issue here is that I can see some(some, not all) CSS on DW, but I see NONE whatsoever when I go to preview in browser, same after uploading. I do have all of the files uploaded and placed in the correct directories, including the stylesheet, and images folder. But, nope, nada. Now, I did think this was a root/directory problem, maybe the url's weren't pointing to the right directories. I checked and attempted to fix this several times and any changes made no difference. Also, uploaded to the root of my site, where all files and folders are where they should be, yet no change. I am utterly clueless as to what is going on here....
Second: Padding, or margins added through CSS for the divs is simply not working in DW or otherwise. I have padding placed on all of the content type areas with writing/content in them and despite the fact that the changes to the font/text formatting I've made show up, the padding does not. This is only in DW since no CSS whatsoever is showing out of DW anyways. I would like to know how to get the padding and the formatting, just all of the CSS in general to actually show up in browser/when uploaded.
Third: The next issue is also confusing, and this only occured after I made the page into a template and uploaded the home.htm page I created from it to my site. For some reason, the image called "../images/aurora2_14_content_marg.gif". Is appearing at the very top of the page for no reason at all. I don't understand why it is there, or how it even got up there in the first place.
Fourth: This was actually next on my list of things to figure out once I've gotten all of the above issues taken care of but since I'm still drawing a blank after 2+ weeks on how to get this done in a way that will work I guess it couldn't hurt to ask on here and get some expertise on the matter. The issue is that I have a repeating background (images/bg.png) that I want stretching downwards as I add content to the page. I have this placed as the main background for the entire site as you will be able to see in a moment through my code/site. Now, the place I want this to start is from where the aforementioned image (../images/aurora2_14_content_marg.gif) stops. However, I want the content to actually start from 20 pixels or so from the top of that very image. I want to try and achieve this through the use of margins but since the margins and padding are not showing up I hve been unable to experiment with it enough to figure out any other way to achieve this. Any suggestions on how to achieve this would be much appreciated.
Fifth (yes, unfortunately we're still going): As you may be able to see through the design I have two seperate areas for the main content and the navigation and other such items to be placed. To clarify, the content will be placed(through the use of expandable content boxes, once I figure out how to work that) beginning at the aforementioned image/td/div (../images/aurora2_14_content_marg.gif) with a bit of padding or margin from the top and sides (too pull the content towardsthe center of the site rather than all over from left to right like it is appearing now). The navigation etc will be placed where the long cyan area is under the search bar. For both of these, I cannot figure out how to split my one background image and also the content_marg.gif image into the two divs/or whatever else would work to split their contents from eachother. I think that seperating them into 2 divs with padding from the sides and eachother and seperate top paddings (I want the navigation to begin more near the top of the page than the content). The issue here is, I cannot figure out how to do this.
Any and all suggestions would be greatly appreciated. Also, any tips on how to achieve the code for the solutions provided would also be very much appreciated, as I am only just starting out coding.
The site/page:
http://aurora.comeze.com/home.htm
The stylesheet (style.css):
http://aurora.comeze.com/style.css
Like I mentioned above, all of this except the padding shows up in DW. Whereas, none of this shows up at all in browser view, or through the site.Summary of issues #1 through #5:
Code errors galore:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Faurora.comeze.com%2Fhome.htm
Photoshop generated HTML.
20th century table based layout with endless spacer gifs.
START OVER
From Tables to CSS Web Design Part 1 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt1.html
From Tables to CSS Web Design Part 2 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt2.html
=========================
DW Starter Pages (CSS Layouts)
http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html
=========================
Taking a Fireworks (or Photoshop) comp to a CSS Layout in DW
Part 1 - Initial Design
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Part 2 - Markup preparation
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
Part 3 - Layout and CSS
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
========================
HTML & CSS Tutorials - http://w3schools.com/
Learn CSS positioning in 10 Steps
http://www.barelyfitz.com/screencast/html-training/css/positioning/
How to Develop with CSS?
http://phrogz.net/css/HowToDevelopWithCSS.html
========================
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Best of luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/ -
The iPhone iOS 4 User Guide sees to indicate that the SYNCH function is all one way from computer to iPhone, unless it is for purchased items in iStore on the iPhone.
1. How can I delete some (not all) Albums and Music from my iPhone when the original computer that did the iTunes to iPhone synch is no longer available (stolen)?
2. How can I transfer Albums and Music (not purchased from iStore on iPhone) from my iPhone to the new computer?
3. How can I delete some (not all) pictures in my iPhone "Photo Library" when the original computer that did the iTunes to iPhone synch is no longer available (stolen)?
4. How can I transfer pictures in my iPhone "Photo Library" to the new computer?Hi wjosten,
thanks for the "TouchCopy" software link. I have downloaded a demo copy and it will resolve my transfer of music from iPhone to the new computer. I can then delete any unwanted music on the new computer, then re-synch the updated music to iPhone.
I am not sure about the photos. On my iPhone, there are two photo "albums" - one called "camera roll" and the other called "photo library." TouchCopy finds the pictures in the "camera roll" DCIM folder, and I can copy them to the new computer etc.
However, TouchCopy does not seem to find the "Photo Library" folder. Any clues? -
For the new iPhone 5s - is there not an option anymore to edit imessages without deleting the whole stream? There are some things I need to keep within a stream and some not necessary, and it looks as like no editing within a conversation?
Now I also know about pulling the message to the left to see the time stamp. Good to know, although I preferred it being right where I could see it without having to do a swipe or keystroke.
-
Lately I've been importing photos from my iPhone to iPhoto and when I attempt to edit them they seem to disappear. Some reappper as a photo stream pic (some as the edited version and some not). But they no longer appear as a recent import. Lots more happens and I'm wondering if it's because I have a 5-year old Mac book or iPhoto is having issues. I'm not happy with disappearing photos especially after I've deleted them from my iphone after importing them to my macbook.
Has anyone experienced similar difficulties and what can I do?Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
Question Hi - I've transferred my iTunes library from windows 7 pc to one with windows 8. My library was in alphabetical order by surname but after transfer is now some by surname, some by first name, and some not in alphabetical order. How do I sort this out and also make sure that new downloads list by surname alphabetically?
Sorting in iTunes is often controlled by selecting different column headings. The sort order for any given column may be further modified by a sort value, e.g. Sort Artist affects the sort order of Artist. If you transferred the library properly all of the metadata should have remained intract and you simply need to select the a column that sorts as you want. If you had to import the library then there is the potential for tagging effects that could mean metadata entered previously didn't import with the media. Note that iTunes has no mechanism for automatically deciding which values are in <Forename> <Surname> order and could therefore be sorted as <Surname> <Forename>. The only automatic process drops leading articles (a/an/the) so that "The Doors" sort under D as "Doors".
See also Grouping tracks into albums.
tt2 -
Still some 'Not Assigned' in query result
Hi,
In fact, I've built a query on a multiprovider ( 1 Cube + 1 ODS )
The ODS and the Cube are joined by the material (0material).
The Cube and the ODS are well filled. Queries on each Infoprovider correctly display the results.
When I launch my query on the Multiprovider, it seems the "joined" between the 2 infoproviders doesn't work as
I've still some '#' / 'Not Assigned' value in the query result, and it should give me a result.
In fact the data from the ODS aren't retrieved, they are replaced by '#'. And I don't why ?
Please help.
Thx a lot,
ErwanYes you are right.
I made a mistake in my explanation.
But the problem is that the characteristics from the ODS aren't displayed though the characteristic from the cube are correctly displayed.
eg.
In the ODS I've :
( Material, ZCHAR )
'ART01' '315'
'ART02' '412'
'ART03' '999'
In my Cube I've :
'ART01' '12,36' '59,00' '30 ST'
'ART02' '12,96' '89,00' '40 ST'
In the query(on the multiprovider) result I've :
( Material, ZCHAR, other values...)
'ART01' '#' 'Not assigned' '12,36' '59,00' '30 ST' -
I want to add the oriental scale or detune some notes while playing - garageband.
Hello,
I want your help in teaching me how to add an oriental scale in the latest garageband version, I want to play middle estern music but that wont happen unless some notes are de-tuned, If i can't add a scale, could some keys be detuned perminently? I don't want to detune it or edit it after playing and recording it. I want it to be perminently detuned so i get that sound while playing.
PS: I searched google with no results!.
Thanks a lot.Hi Christine,
In iMovie's menu go to iMovie>Preferences and, in the General tab, check (tick) the box labelled "Show Advanced Tools".
Drag the picture directly onto a clip approximately where you wish it to appear. As you drop the picture, a pop-up menu will appear. Select "Cutaway". The picture will now appear in place of the video but the original audio will be intact. If you double-click on the Cutaway, the Inspector will open - here you can make adjustments to the Cutaway, such as Opacity and Duration.
John
NOTE: As well as Cutaway, in the pop-up menu there are choices for "Picture in Picture" and "Side by Side". You may prefer to use one of those to show your picture, rather than doing a Cutaway.
Message was edited by: John Cogdell - added NOTE -
Weg Gallery: Some photos downloadable, some not
Dear Forum,
I have an odd one here: I have a (password protected) Web Gallery I regularly update with new photos. It now turns out that all images I uploaded up to around a week ago are downloadable, the latest ones consistently aren't. I would like them all to be downloadable.
No settings have changed on the one computer (Macbook Pro) that I use to publish the web gallery. I have seen similar threads on this topic within this forum, but with no answer so far. I have followed one recommendation, to change the Web Gallery setting to make all images not-downloadable, synchronize, and make them downloadable again. No difference! I have the latest iPhoto version.
The consequence of this nuisance is that other iPhoto libraries which subscribe to this web gallery only get a small image downloaded (320x211 pixels).
Am I right in assuming this is an iPhoto bug? I cannot see any other setting I can change, and there is no distinction whatsoever between the photos - all are taken by the same camera over the past 3 weeks. There is no reason that I see for this sudden change in behavior.
Thanks a lot in advance!I've seen this too, but even with non-updated galleries - some photos are downloadable, some not.
I think the servers may be unstable or there are errors in updating the status of individual images.
I suspect it's a 'bug' of sorts but I've no idea if it's iPhoto or the server end.
Also there seems to be an issue with uploaded 'originals' getting re-sized. My Canon photos are 3504 wide but get changed to 3054 wide for download (heigh scaled to preserve aspect ratio). These originals will be 1/6th of the size of library originals.
It's not ideal but another poster mentioned that deleting the web gallery then re-publishing corrected things - not an ideal solution but may be worth a shot - maybe you could create an album which gets published as a web gallery to allow for easy updates of a gallery from different events.
AC
Maybe you are looking for
-
Delivery document no in shipment cube ?
How to identify delivery document no from shipment extract stru ? I need a report with shipment details for specific del document no . Do v have any field in shipment extract structure where v can link it with delivery doc no . Let me know field name
-
Okay so I deleted my partition with Windows on it and then I was trying to get the disk to be one partition... it wouldn't take so I tried verifying the disk, I clicked something else and it gave me that beachball thingy so I turned off the computer
-
Script for Form validator in head causes error
When I use the Window/Behaveiors/ to create a form validator, Dreamweaver CS5 puts script in the Head of page, and seems to work ok. But when I validate page with W3c it says there are errors with code and as Dreamweaver created this I have no idea w
-
[Solved]Can't run sublime-text
Hey, maybe I am just stupid today but I can't run sublime-text. I just installed it from the AUR (no errors) and when I try to run it in my Terminal all I get is: [user@ArchPad ~]$ sublime-text bash: sublime-text: command not found Sublime seems to b
-
Default style is driving me crazy
I want all of my WP documents to use a particular font in a particular style but even though I've followed the instructions in AppleWorks help, very carefully, about 10 times, on how to do this by editing the "default" style, and even though in the "