WAAS support by non WCCPv2 switches ?
My company is considering a evaluation / test of the WAAS etechnology. We already use 2811 remote routers and core 7206 routers. Our switching is by Enterasys (Cabletron). Enterasys switches do not support WCCPv2. Will we be required to upgrate to Cisco switches to get the WCCPv2 support? Does WAAS require WCCPv2 ?
Mike,
WAAS does not require WCCP for interception. You can also use Policy-Based Routing (PBR), although I'm not sure if there is an equivilant on Enterasys switches.
Can you not run WCCP on the 2811 and 7206 routers?
Zach
Similar Messages
-
Passing Voice VLAN through a non-Cisco switch
Hi All,
Will a non-Cisco switch (no 802.1q support) that is putted beetween Cisco IP Telephone and Cisco Catalyst switch (which is configured with auxilary Voice Vlan) pass voice vlan frames and CDP?Any switch should pass on either ISL(which is cisco properitary and hence not supported on non-Cisco) or IEEE 802.1Q frames or else it cannot support voice vlan support . And non-Cisco switches do not support CDP as it is once again Cisco proprietary protocol.
-
VLAN support on ESW 500 switch
How many VLANs does the ESW 500 switch support?
The ESW 500 switch supports a max of 256 VLANs and can accomodate upto 8000 MAC addresses in the CAM table.
Note, by default on the POE switches, VLANs 1 (data) and 100 (voice) are enabled while on the non POE switches, only VLAN 1 (data) is enabled. -
Dear ALL,
I am an IT Potfessional, Doing Network + . I have a questions:
1) Do Non Cisco Switches have Access and Trunk ports. What i mean is do non cisco switches distinguish between ethernet prots as trunk and access.
2) Do we need Cross talk cable for Connectine two non cisco switches preferably D-Link . Also How to interconnect a Cisco switch wioth non cisco switch.
Regards
HaseebDisclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
As Daniel noted "decent" switches, i.e. manageable and supporting VLANs, will generally support VLAN tagging ports using the 801.2q standard. (NB: this standard allows VLAN tagging between different vendors.) Switches that support VLANs will distinguish between untagged (edge) ports (e.g. Cisco access) and the tagged ports (e.g. a Cisco trunk), but as Daniel also noted, their terminology might be different.
As Leo noted, many switches offer auto MDI/MDI-X. Surprisingly, this feature was often seen on unmanageable switches before it was seen on manageable switches. Also on older unmanageable switches, you might find a pair of physical ports that are the same logical port, one wired MDI and other wired MDI-X or you might find some button to change one port's MDI to/from MDI-X. Such "special" ports are often the "uplink" port. (NB: the purpose of the "uplink" port was to allow connecting it to another switch whether you had a straight through or cross over cable.)
If you do have a switch supporting auto MDI/MDI-X, or one with the earlier physical MDI/MDI-X options, you only need one switch, not both with such a feature, to support either a straight through or cross over cable. Of course, both switches might have such an option, which is fine too. Only if both switches are "hard wired", you'll need a cross over cable for a switch to switch connection. -
QOS: egress police command not supported in non-leaf classes
Hello,
I have issue with egress policers on EFP (Service instance).
When configure two egress policers on EFPs (on one physical interface), I received a message:
ME-3600X(config-if-srv)#service-policy output VLAN-50M
QOS: egress police command not supported in non-leaf classes
QoS: Policy attachment failed for policymap VLAN-50M
The configuration looks easy:
policy-map VLAN-50M
class VLAN
police cir 50000000
exceed-action drop
class-map match-all VLAN
match protocol ip
interface GigabitEthernet0/11
description TEST
switchport trunk allowed vlan none
switchport mode trunk
mtu 1998
load-interval 30
service instance 199 ethernet
encapsulation dot1q 199
rewrite ingress tag pop 1 symmetric
service-policy output VLAN-50M
xconnect 82.119.245.231 3291 encapsulation mpls
service instance 500 ethernet
description L2MNG-SWITCHE
encapsulation dot1q 500
rewrite ingress tag pop 1 symmetric
bridge-domain 500
I tried to attach the same policy-map to Service Instance 500, with the messages above mentioned.
I am not sure if this is correct behaviour, and what means term "non-leaf class".
IOS version is 15.2(4)S2 with AdvancedMetroIPAccess.
Best regards,
JosefPlatform supports three level hierarchy - Port, VLAN and Class.
Class is the leaf level.
Queuing is done only at the leaf level.
You need to attach your policy to the port level policy so that it can be a two level policy.
Three Level Class-default Policy Example:
policy-map leaf
class class-default
queue-limit xxxxx bytes
policy-map logical
class class-default
service-policy leaf
policy-map root
class class-default
service-policy logical
Invalid Queue-Limit Policy Configuration Example:
This case "class-default" is being considered as the port level.
Following QOS policy configuration failed because the configuration check assumes user is trying to apply the queue-limit at the vlan level which is not supported.
policy-map child-1
class class-default
queue-limit 256 packets
policy-map VLAN-OUT
class class-default <<< Class default is being assumed at the port level , Child policy at the second level
shape average 5000000
service-policy child-1
interface GigabitEthernet0/5
switchport trunk allowed vlan none
switchport mode trunk
service instance 2 ethernet
encapsulation dot1q 60
rewrite ingress tag pop 1 symmetric
bridge-domain 60
3600-HL-2-N(config)#interface GigabitEthernet0/5
3600-HL-2-N(config-if-srv)#service-policy output VLAN-OUT
QOS: queue-limit command not supported in non-leaf classes
QoS: Policy attachment failed for policymap VLAN-OUT
*Feb 13 09:55:28.700: %QOSMGR-3-QLIMIT_LEVEL_ERROR: Qlimit command not supported in non-leaf classes -
I ordered two itunes cards tonight and my granddaughter didn't receive either of them!
I was unable to obtain online support of any kind.
The gift view will not allow me to edit the gift, delte or change it.
Any ideas how I can delete these from my account? Itunes support is non-existent!!She's checked the spam folder on her email account as well as the inbox ? You should also be able to try resending it (and double-check the email address) : http://support.apple.com/kb/HT1541
If you can't then contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Pagination support for non-Oracle databases?
Hi,
I just read this thread (Pagination Support on pagination support. Is there any way to get pagination with non-Oracle databases? We are using an IBM iSeries / AS/400 DB2 database right now, and we're planning to use some local lightweight database in the near future as well (probably Cloudscape/Derby or "IBM Everyplace database".)
We currently use code like this:
String sql = "SELECT art FROM Artikel art" +
/* dynamically generated where statement is added here */
+ "ORDER BY art.artikelNummer";
Query q = em.createQuery(sql);
q.setFirstResult(firstResult);
q.setMaxResults(maxResults);If I look in the TopLink logs, I see queries like this:
SELECT ARTNR, ARALT, ARAFJ, ARXII, ARAVJ, ARXIV, ARANJ, AHGCD, ARNVJ, ARCRJ, ARARK, ARFKJ, ARTNK, ARGP1, ASGCD, ARGP2, ARPR1, ARGP3, ARPR2, AREX1, ARPR3, AREX2, ARPR4, AREX3, ARASA, ARINA, ASSCD, ARIA1, ARBAN, ARIN1, ARBAV, ARIA2, ARBAK, ARIN2, ARCES, ARIA3, ARCDT, ARIN3, ARCRE, ARIA4, ARCWK, ARIN4, ARHBH, ARIA5, ARDFA, ARIN5, ARDFG, ARIA6, ARDOS, ARIN6, AREPW, ARINN, ARFOD, ARIAS, ARFOE, ARINS, ARFOF, ARNAB, ARFOI, ARNIB, ARFON, ARNIA, ARFOS, ARNN1, ARFTA, ARNA2, ARVIV, ARNO2, ARGAP, ARNN3, ARGPT, ARNA4, ARGPD, ARNO4, ARGPA, ARNN5, ARGPO, ARNA6, ARHIS, ARNN6, ARISP, ARNIO, ARKHM, ARNNS, MAGCD, AROVJ, MTGCD, ARPL1, ARMXM, ARPL2, MRKCD, ARPL3, ARMVR, ARVKJ, ARMIM, ARV12, ARMDT, ARVVJ, ARMTE, AR#VR, ARMTU, ARZLS, ARMTM, ARIAT, ARMWK, ARAVS, MPCCD, ARNVS, ARBTW, ARFJS, ARXI2, ARG2S, ARXI3, ARE1S, ARXI4, ARE3S, ARXI6, ARIB1, ARXI1, ARIB2, ARXI5, ARIB3, AROPI, ARIB4, ARPRV, ARIB5, SZGCD, ARIB6, ARSPC, ARINO, ARSMF, ARIOS, VEAAN, ARNIS, ARSYN, ARNO1, ARVR1, ARNA3, ARV1S, ARNN4, ARVR2, ARNO5, ARV2S, ARNIN, ARVR3, ARNOS, ARV3S, ARP1S, ARTFA, ARP3S, ARTFG, ARS12, ARUVC, ARZLD, ARUCW, ARAJS, ARBKV, ARCJS, ARVVI, ARG3S, ARVVP, ARINB, VPOCD, ARIO2, VPECD, ARIO4, ARVIH, ARIO6, ARVHG, ARNBS, ARVRW, ARNN2, ARVPR, ARNA5, ARVVR, ARNAS, ARVVS, ARP2S, ARVV1, ARSVV, ARZK1, ARNJS, ARNA1, ARNO3, ARIO1, ARNO6, ARIO5, AROJS, ARE2S, ARVJS, ARIBS, ARIAD, ARIO3, ARG1S FROM ART WHERE ((((ARUVC = 'N') AND (ARHIS = 'N')) AND (ASGCD = 7)) AND (AHGCD = 15)) ORDER BY ARTNR ASC
(Yeah, I know we have too much columns in the table...)
So, no pagination in the query. As you can see, we have a mechanism in place to dynamically generate a where clause. This is because the user can set filters. The problem is, if our user sets a filter that causes the result set to be significantly smaller, the performance is way better than when he sets no filter at all. We suppose this is because the whole result set is sent to TopLink, regardless of the values of firstResult and maxResults.
We are using TopLink Essentials 2.1-10, by the way.
Message was edited by:
Bart KummelHi all,
I'm trying to subclass <tt>DatabasePlatform</tt> to add pagination support for the AS/400 DB2 database of my customer. To be fair, it is not going very well so far.
The first problem is, the query Chris found by googling (Re: Pagination support for non-Oracle databases?), does not work for AS/400s version of DB2. In fact, although it is called "DB2", the database on the AS/400 system is a whole other database than the "normal" DB2 database that runs on Windows and *nix. The AS/400 DB2 simply does not have a "ROW_NEXT" function.
Another option would be to use the <b>row_number() over()</b> mehtod. But, as can be read here, this function is only available from version V5R4 of OS/400. And guess what? We're stuck on V5R3 at this client. (We cannot upgrade, because there's an application in use that's written in Delphi and IBM dropped the Delphi binding from V5R4...)
So I pretty much ran out of options. On the mailing list I linked to above, someone mentions the option to make a sort of stored procedure that generates a row count number. An example of how to do this can be found here. I implemented it, and ended up with this code:
package com.myclientsname.persistence;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import org.eclipse.persistence.expressions.ExpressionBuilder;
import org.eclipse.persistence.internal.databaseaccess.DatabaseCall;
import org.eclipse.persistence.internal.expressions.ExpressionSQLPrinter;
import org.eclipse.persistence.internal.expressions.SQLSelectStatement;
import org.eclipse.persistence.internal.sessions.AbstractSession;
import org.eclipse.persistence.logging.SessionLog;
import org.eclipse.persistence.platform.database.DatabasePlatform;
import org.eclipse.persistence.sessions.SessionProfiler;
public class AS400Platform extends DatabasePlatform {
private static final long serialVersionUID = 0L;
public AS400Platform(){
super();
super.setShouldBindAllParameters(false);
public void printSQLSelectStatement(DatabaseCall call, ExpressionSQLPrinter printer, SQLSelectStatement statement) {
int max = 0;
int firstRow = 0;
if (statement.getQuery()!=null){
max = statement.getQuery().getMaxRows();
firstRow = statement.getQuery().getFirstResult();
if ( !(max>0) && !(firstRow>0) ){
super.printSQLSelectStatement(call, printer,statement);
return;
} else {
statement.setUseUniqueFieldAliases(true);
ExpressionBuilder builder = new ExpressionBuilder();
statement.addField(builder.getField("COUNTER() AS CNTR"));
printer.printString("SELECT * FROM (");
call.setFields(statement.printSQL(printer));
printer.printString(") AS R WHERE R.CNTR >= ");
printer.printParameter(DatabaseCall.FIRSTRESULT_FIELD);
if ( max > 0 ){
// Use of binding parameters is not allowed here, so use
// String concatenation instead...
printer.printString(" FETCH FIRST " + max + " ROWS ONLY");
call.setIgnoreFirstRowMaxResultsSettings(true);
public boolean wasFailureCommunicationBased(SQLException exception, Connection connection, AbstractSession sessionForProfile){
if (connection == null || this.pingSQL == null){
//Without a connection we are unable to determine what caused the error so return false.
//The only case where connection will be null should be External Connection Pooling so
//returning false is ok as there is no connection management requirement
//If there is no ping sql then we can not perform the ping.
return false;
PreparedStatement statement = null;
try{
sessionForProfile.startOperationProfile(SessionProfiler.ConnectionPing);
if (sessionForProfile.shouldLog(SessionLog.FINE, SessionLog.SQL)) {// Avoid printing if no logging required.
sessionForProfile.log(SessionLog.FINE, SessionLog.SQL, getPingSQL(), (Object[])null, null, false);
statement = connection.prepareStatement(getPingSQL());
ResultSet result = statement.executeQuery();
result.close();
statement.close();
}catch (SQLException ex){
try{
// Had to add this check because of NullPointerExceptions
// (maybe a bug?)
if(statement != null){
//try to close statement again in case the query or result.close() caused an exception.
statement.close();
} catch (SQLException exception2) {
//ignore;
return true;
}finally{
sessionForProfile.endOperationProfile(SessionProfiler.ConnectionPing);
return false;
}(As you can see, I had to override the <tt>wasFailureCommunicationBased()</tt> method as well, due to some unexpected NPE's. (A bug, perhaps?))
This code does work. However, the performance is not very well. The first page comes relatively fast, but as you browse further in the table, each page comes slower. I assume this is because the counter() method has to be evaluated for each row in the table.
I have to get the performance better and constant. Does anyone have an idea how to optimize this further?
Best regards,
Bart Kummel -
Does anyone know if a 7960 (SIP) phone can connect to a non-Cisco switch and separate the Voice traffic from the access port traffic?
I tried connecting a 7960 to a baystack 450T, configuring the switchport as a "tagged trunk", and then changing the Admin Vlan ID on the phone to the desired voice vlan. It looks as though the switch wants the access port traffic to be tagged as well.
Any help would be greatly appreciated!
Thanks,
DarinHi !
You need to configure a 802.1q trunk on your non-cisco switch. The 802.1q native vlan should be the one the PC is in. The voice vlan will be tagged.
Configure all parameters (like voice-vlan-id etc) on the phone manually (obviously CDP does not work). I have done it and it works fine (but i never tried on the switch you mentioned).
Inline Power will also not work because the 7960 is not 802.3af compliant (yet).
Mike -
Does this select stmnt is supported by non unicode system?
hi all,
does this select stmnt is supported by non unicode system?
SELECT * FROM DD02L INTO TABLE I_TABL
WHERE TABNAME IN S_TABL
AND AS4LOCAL = 'A'.
this select stmnt is going for dump in 4.6.
pls help me....
regards,
sri sri.Hi,
It's working fine in both (unicode and non-unicode) systems,
TABLES: dd02l.
SELECT-OPTIONS:
s_name FOR dd02l-tabname.
DATA:
w_tabl TYPE dd02l,
i_tabl LIKE TABLE OF w_tabl.
SELECT *
FROM dd02l
INTO TABLE i_tabl
WHERE tabname IN s_name
AND as4local = 'A'.
LOOP AT i_tabl INTO w_tabl.
WRITE:/
w_tabl-tabname,
w_tabl-tabclass.
ENDLOOP.
Regards
Adil
Edited by: Syed Abdul Adil on Jun 18, 2008 12:39 PM -
has anyone here been able to install and run Logic Pro 9.1 on a dual 1.8 G5 PPC? I know LP9 is not officialy supported on non Intel CPUs, But 9.0.0 and
9. 02 are ok on the G5 PPC as it is universal Binary, while I hear 9.1 wont work.ok thanks, that's what I tought,looks like apple machines are only good for two - three years, the software developers are ahead of the hardware to a certain point, love macs but this is forcing us to buy new macs just to keep up with development. There was a time it was the opposite.
By the time we get up on new stuff it's time to change again. Gotta be rich to deal with macs ...LOL -
Where is Adobe support for non-working software??
Where is Adobe support for non-working software??
Thanks,
JerryBill,
Thank you for your reply!
You may have guessed I am a bit exassperated. (See this discussion from yesterday.) (Re: How do I get past the Error: 16 problem?
I am trying to move Adobe Acrobat IX, Photoshop CS6, Photoshop CC and Bridge to a new computer (Mac Pro (late2013), Mavericks 10.9.3) from an older Mac Pro using the same OSX.
I keep getting the error 16 message whether I try to open Acrobat or Photoshop (I have a paid for DVD of CS6). I have uninstalled and re-installed. I have reset permissions on 2 folders ion the system Library. I have either deactivated or signed out of ALL the Adobe products on my old computer. I signed in as 'Root' and tried to open the software. I have re-downloaded all the products except CS6 which I own. I have restarted the computer. I have repair the drive using Disk Utility and Disc Warrior. In short I have tried everything I can think of and that which has been suggested my others on this Forum.
Thanks again,
Jerry -
Does Supervisor Engine 6L-E compatible with Cisco Ws-C4506 Non-E switch?
Does Supervisor Engine 6L-E compatible with Cisco Ws-C4506 Non-E switch?
Yes, it is compatible with non-e chassis.
see below:
The Cisco Catalyst 4500 Supervisor Engine 6L-E is also compatible with classic Cisco Catalyst 4500 line cards, chassis (3-, 6-, and 7-slot), and power supplies, providing full investment protection.
link to data sheet:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/data_sheet_c78-530856.html
HTH -
Does Adobe Edge Inspect support a user agent switcher or mobile emulator?
Hey there,
Does Adobe Edge Inspect support a user agent switcher or mobile emulator?
is there any kind of particular user agent switcher/emulator that is supported? if so, which?
does Adobe have a reliable user agent switcher that supports a tilt option?
thanks for any help on thisPlease ask your question in the Edge Inspect forum here http://forums.adobe.com/community/edge_inspect. They will be able to help you.
-
Hi,
As the topic says does WAAS support acceleration of https traffic? If so where can I find this information?
Also and more importantly where can I find performance and scalability information (Max Opt tcp connections, WAN capacity etc.) for WAAS and WAVE devices?HTTPS is currently only accelerated with TFO (no compression or AO) in WAAS 4.1.1 and before. HTTPS support is being introduced with a Application Optimizer in the upcoming release WAAS 4.1.3. 4.1.3 will allow optimization past TFO to include Full Optimization, etc.
Look for a late March release date with more information on the HTTPS AO as well as Scaling information at that time.
The current scalability numbers can be obtained from your partner and/or sales team, which would probably be the best way to review all the models.
Thanks,
Dan -
Does WAAS support SMB2? When or what version?
SMB2 is better than SMB/CIFS and can be used between Vista/7 and Windows 2008. Also SMB2 uses newReno TCP algorithm that is better for high loss environments.
ThanksThe CIFS AO does not currently support SMBv2. We are working on this for a future release. Based on our initial testing, there is still plently of opportunity for acceleration improvements even with the changes that have been made to the protocol.
The TCP enhancements are somewhat irrelevant, except on thier potential to improve the behavior of TCP on the client <-> WAE and WAE <-> server segments. The WAAS optimized connections have had the performance improvements in the new Windows TCP stack for some time.
Regards,
Zach
Maybe you are looking for
-
Adobe form from webdynpro : Getting a single row in the table
Hello, I have a scenario in which I have to create a adobeform from webdynpro application. I have created the form and have the context designed in place. I am facing a problem in the table I have in my adobeform. I am adding rows to this table dynam
-
Has anyone had trouble with word freezing after installation of adobe acrobat 9 professional?
Has anyone had troubel with Word fr eezign after instillation of adobe acrobat 9 professional and what did you do to res olve it?
-
Hi All, I need to configure output device i have lexmark LXT44 model. when i check for LXT644 in SPAD i cannot find ,so can i use ZSAPWIN instead of LXT644. I have 4.6c HP-UNIX. Please let me know what needs to be done from my side. Thanks &Regards
-
Fullscreen Ppro direct link bug report
Hello, When direct linking from Ppro with a full screen previewing of your timeline, the preview "sticks" and you are stuck with the single frame you were at in PPro when you enter Speedgrade, even if you try the keyboard shortcut for getting out of
-
Error Type 102, Unimplemented Trap, Will not initialize...
Among a lot of eight iMacs that were donated to us, there are a pair of them each with their own issues. Both are old CRT iMacs from 2001 with 266MB of RAM. (#1) This iMac initially was advertising an "Unimplemented Trap." I could boot up with the sh