WAAS: Using 4port HWIC module on a router

Hello -
I was wondering if there are any performance issues with using a 4-port HCWIC ethernet module on a WAN router for connecting the WAAS device rather than trunking down to your switch? We have this deployed today in all of our remote sites using 2 WAN routers for redundancy along with multicast for the WCCP registrations. We do sometimes get dropped packets when you do a show int sum on the WAAS connected interfaces, but it's not incrementing rapidly.
Thanks,
John

Of course I'm doing optimization on the WAAS that's all the whole point of having WAAS. I don't think you understand my question; you only posted marketing information which I do not need. My question was, are there any performance issue with using the 4-port hwic module on an ISR router?

Similar Messages

Does the Aironet 3600 can be used in France (5ghz) ? What is the PSU voltage ? Hwic module equivalent exist ?

Hi,
Does the power supply from aironet 3600 series, AIR-CAP3602I-A-K9 is compliant with french voltage ?
Is it 110-220 input ? How to have a standart french plug or adapter if i bought this item in US ?
Does this hardware can be used in France regarding authorized wireless frequency 2.4 and 5 GHz (802.11a/b/g/n/ac) ?
Do you know if it exist any kind of HWIC module with same wireless performance that it can be used with G2 ISR Router (19xx/29xx/39xx) or previous generation ISR (18xx/2xx/38xx) ?
Best Regards.

Does the power supply from aironet 3600 series, AIR-CAP3602I-A-K9 is compliant with french
If you enable this AP, you are likely breaking French law. This AP is configured to be use with "-A" Regulatory Domain.
France should be using "-E".
Power supply issue ... 3600 will work with 15.4w PoE as long as you don't add modules. If you do, you need 20.0w PoE.
You have three choices: PoE switch, Power Injector 3 or Power Brick.
Edit: Just re-read your post about "802.11a/b/g/n/ac" so this confirms you need 20.0 PoE. So the same choices are still applicable: PoE+ switch, Power Injector 3 or Power Brick.

Function module name for routing fom production orders

Function module name for routing fom production orders

Hi
There are lot of fun modules related to routing
like
BAPI_ROUTING_CREATE
BAPI_ROUTING_EXISTENCE_CHECK
goto SE37 Tcode
enter routing press F4
you will get a lot out of that use the required one
Reward points for useful Answers
Regards
Anji

Which BOM is used for PI module

Hi,
All
Which type of BOM is used for PI module?

Hi,
You can create BOM using normal T.Code CS01 in PP-PI.
For creating Resource (work center), T.Code is different i.e. CRC1 and Recipe (routing) is C201.
For creating Process Order is COR1.
For BOM it the same t.code. It is generally referred as Material List.
Hope it is useful.
Srini

I want to use the Web module to publish to the a website... What kind of server do I need to be able to publish my website?

I want to use the Web module to publish to the a website... What kind of server do I need to be able to publish my website?

You don't need a server, you just need a web hosting package such as the ones from GoDaddy or many other hosts. You then send the web gallery directly from LR to your web space.
As you're asking such basic questions, it might be best if you read articles like this and see if a friend or colleague can get you started.

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

How do I use my iPhone 5 as a router for my iPad?

How do I use my iPhone 5 as a router for my iPad?

Yep, as stedman has helpfully proffered a link on HowTo.
Once the personal hotspot is up, you can connect a reasonable number of devices to gain Internet access. The iPad can hook up either via Wi-Fi or Bluetooth. If you have a computer, you also have the choice of a wired connection as well.

Blue screen when using 2 memory modules !!

Hi,
When I use two memory modules (installed on bank 1 and 2), windows xp fails to install randomly (sometimes at the beginning, sometimes even after a rebooting...) and generates a blue screen of death... !
However, they are correctly visible at boot time.
But when I use only one module, it works fine (I tried with the first and the second module separately). These modules are strictly the same.
What should I do now ?
Just a remark : my FSB is at 100 Mhz. Is it normal ? (newbie question)
Thanks
David
Here is my configuration :
Athlon XP 2600+
2x512 Mb DDR PC2700 (MDT)
120 Gb UDMA6 IDE master on IDE1
80 Gb UDMA5 IDE slave on IDE1
DVD UDMA2 IDE master on IDE2
Firewire disabled
RAID activated (but not used so far)
LAN and Audio enabled

I think 300 watts is a way too SMALL for what your trying to run. Check your label on the power supply and see what your 3.3 volt and 5 volt supply amperage is. Anything less than 200 watts combined or about 28amps on 3.3 and 35 amps on the 5volt is going to give you grief. You need a bigger power supply. Recommend Antec or Enermax as the solution. Antec SL350 or higher.
Newegg has good prices and great service
Antec Power Supplies

How to use read_text function module

Hi how to use read_text function module to read purchase order header text .what are all tht things to pass in ID,Name and Object
thanks,
Mahe

Dear,
Use below code.
DATA:IT_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE,
V_TDNAME LIKE THEAD-TDNAME.
V_TDNAME = PO_NUMBER.
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    ID                            = 'F01'
    LANGUAGE                      = 'EN'
    NAME                          = V_TDNAME
    OBJECT                        = 'EKKO'
TABLES
    LINES                         = IT_LINE.
Thanks and Regards,

How to avoid use of function module in case of background jobs?

Hi ,
I am working a file tranfer interface .Functionality is to extract file either apllication or presentation server , and process the file through bapi , send the result in their respective server. This program should run through batch jobs in background mode.
I am using following function module :
SUBST_GET_FILE_LIS : Get the file list from application server
TMP_GUI_DIRECTORY_LIST_FILES : Get the file list from presentation server
GUI_UPLOad : to extract file data from presentation server
GUI_downLOAD : to download data to presentation server
in case of background job these function modules will not work.... so how to resolve this issue...
what are the methods we can apply?
Thanks & Regards
Sandeep

Hi,
This FM is used to get list of files from Application server (will work in Background). This cannot be used to list files from presentation server. There is no way , by which you can process presentation server files in background mode.
Regards
Vinod

How can i use reuse_alv_fieldcatalog_merge function module

I am using below steps for populating the final internal table.How can I use reuse_alv_fieldcatalog_merge function module in the place of declaring all these fields.How canI put title of the report in reuse_alv_fieldcatalog_merge function module.
FORM BUILD_FIELDCATALOG .
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'KUNNR'.
FIELDCAT-SELTEXT_M = 'Customer Name'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VBELN'.
FIELDCAT-SELTEXT_M = 'Invoice Reference'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKBUR'.
FIELDCAT-SELTEXT_M = 'Sales Office'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKGRP'.
FIELDCAT-SELTEXT_M = 'Sales Person'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'POSNR'.
FIELDCAT-SELTEXT_M = 'Item No'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FIANL'.
FIELDCAT-FIELDNAME = 'ARKTX'.
FIELDCAT-SELTEXT_M = 'Item Description'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.

Hello,
It is very easy to use reuse_alv_fieldcatalog_merge.
You try this it will work.
example
data:
DATA : gv_repid        TYPE syrepid VALUE sy-repid . " Report id
PERFORM set_field_catalog USING gst_struct CHANGING lst_fieldcat.
FORM set_field_catalog USING uv_tab TYPE slis_tabname
                     CHANGING xt_fieldcatalog TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = gv_repid
      i_internal_tabname     = uv_tab
      i_inclname             = gv_repid
    CHANGING
      ct_fieldcat            = xt_fieldcatalog
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " set_field_catalog_spec

Problems setting up WVC80N TZO account using my 2701HG-T 2Wire DSL Router

Hi!
I have 2 WVC80N cameras and I´m using a 2701HG-T 2Wire DSL Router, they are already configured and i can see them wireless, but i tryied again and again to configure both TZO accounts and always recived the next message:
Oops, there was an error when setting up your camera for remote access.
The wizard cannot automatically configure your router due to an invalid or unknown password. Please check your password settings on your router and try again. In many cases, your router may still have the default password setting.
Can somebody help me? What i need to do? Is there another way to watch them throug internet?
Regards!
Ed.

That link above wont work for you, you have a WVC80N and the signup is ON THE CD, not via the website.
This error is due to the router password not working, do you know the admin PW for the router to add/remove port forwarding rules?
If not, call your ISP or whoever gave you the router and get the password then try the setup again
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

Sending mails to UWL using SO_NEW_DOCUMENT_ATT_SEND_API1 function module

Hi all,
is it possible to view mails send using SO_NEW_DOCUMENT_ATT_SEND_API1 function module to UWL?
I am receving emails in my SAP Inbox.
Please guide.
thanks.

Hi,
You can only get the SAP mails into UWL notification tab with the Sonic connector (well of course with some custom development everything is possible).
One trick to get the workflow for sending "mails" to UWL is to NOT use email sending step, but instead use a decision step in the workflow and send this work item to the user. The decision step can include the same message as the email, and have onl one option "Confirm" (or whatever). These you can easily display in UWL since they are normal work items.
Regards,
Karri

I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets. Can I use an Airport Extreme as my router and not use the FiOs router?

I want to use an Airport Extreme as my router. I currently have a Verizon FiOS router. I have Verizon for phone, internet and TV. However, TV-wise, I just have a basic service for one TV with just a regular box. No HD, no DVR. Don't need access to a menu, widgets, on-demand. Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

I know that it will increase my wireless coverage in my house but will it increase the speeds?
Not sure what you are asking here. The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area. But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

How to use the text module in script

hi,
i script how to use the text modules and how to write the code in layout of the script?

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

WAAS: Using 4port HWIC module on a router

Similar Messages

Maybe you are looking for