Wacom Bamboo stopped working after OS 10.9.4 update

Hello.
I wondered if any one else with a Wacom Bamboo has had this problem?
After i installed the OS X10.9.4 update today on my Imac, the tablet stopped working properly. I updated the tablet drivers, then re-installed it but still it doesn't seem to be working the way it did before.
I guess I need to also contact Wacom and see if there is a solution.
Very frustrated!
<Edited By Host>

Leave 10.9.4 alone and work with Wacom to see if there is an update available. I was able to find:
https://www.wacom.asia/en/macosx-driver-637-3-106x-108x-2
If they do not have anything more current you will need to be patient.

Similar Messages

Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.

Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.
I have been on the phone multiple times with Verizon, visited multiple stores and still getting different answers with every different person I talk to...
Since the 4.4.2 update, my phone and my wife's phone (14 or 15 month old SIII's) that worked perfect a couple weeks ago no longer know where they are 95% percent of the time... Location cannot be found and GPS satellites cannot be seen (sometimes after searching for 10 - 20 minutes they will lock on).
And it's not just Google maps, it is all apps that need location (ie. gps status and toolbox, weather channel, etc...)
Google maps has us in the right location 50% of the time but i think that has more to do with 4g and wifi (although i always know the weather and traffic conditions in the next town over now).
Navigation will set up fine in Google maps until you actual move the car. Then it updates location every couple minutes, but usually a couple streets over from where I actually am. Maybe 1 out of every four or five times I try it, it will start working about 15 minutes after I started it (then work flawlessly, so it can actually work sometimes). But if you end the process and start over to see if it really "works", back to square one with it not knowing its location all over again...
I obviously did all the normal trouble shooting fixes with the battery and sim card removals and even did a "recommended factory data reset" on my phone with no luck. After this didn't work I stopped by another verizon store yesterday that has "tech services" that I was told could run some sort of diagnostics on my phone. After I showed the tech all the screen shots i have taken of what was happening while driving, he said it is a software problem and a very common one at that.
I was told I should either buy new phones or switch to the edge program where i can get a new phones. These don't seem like very fair solutions to me considering before the 4.4.2 update our phones worked perfect and they are both in almost perfect condition after 14 or 15 months...
Will there be a fix to this??? Is it a Samsung problem??? Should I be contacting them???

If it is 3GS, you can update it to iOS 5 and it will work.

Why did AME stop working after the last Windows 7 update

AME suddenly stopped working after the last Windows 7 update. After the initial splash screen, I get a message saying that AME is not working and the program will be closed. Then I get the windows message that it is searching for a solution, then nothing. I am using the Production CS6. This happens whether I try to start AME directly, or queuing through Premiere Pro. I have tried reinstalling the entire package and have implemented all available updates from Adobe. I have no clue why this happened, but AME is crucial to my workflow.

Try to delete the following folders and then launch AME:
%AppData%\Adobe\Adobe Media Encoder
%AppData%\Adobe\Common
Make sure to first make a backup of those folders.

DI Server stopped working after automatic Windows Server 2003 update

One of my customers is running SBO 2005A SP1 PL22 in Windows 2003 Server environment.
They are also using DI Server as an integration tool. On September 11, DI Server suddenly stopped working. They just get the notorious -1 / Could not commit transaction error message on each login attempt. I have tried all the usual and unusual quick fixes to resolve the issue, but nothing seems to help.
To make things odd, I was successful a couple of times when I experimented with different login messages. For instance, if I omitted the <language> and <licenseserver> elements from the message, I was able to get through once. However, a new attempt with the exact same message failed again. Thus the DI Server is not completely down, it's just in some kind of limp mode.
I checked what had changed that night and I realized that there had been huge automatic Windows updates on the evening of September 10, 2009. There was IE8, .NET Framework 3.5 SP1 and a huge array of security etc patches that had been automatically installed. I'm pretty confident that one of these is the cause of the problem. However, I would hate to blindly roll all those updates back.
Is there anyone out there who's had this same problem and possibly found a cure ?
As the customer is running a version that's no longer supported, no support can be expected from SAP. They will just tell us to upgrade to 2007 before any further help is given. Weill, it seems that people out here in the SDN usually have a much better knowledge about the product than SAP does
Henry

Hi Gordon,
Is DI Server really using some version of the .NET framework? If so, do you know which one ?
Best Regards,
Henry

My HP Envy touch screen stopped working after getting an HP Bios update yesterday

Can someone please tell me how to fix my touch screen. I received an HP BIOS update which caused my touch screen to stop working. I've tried re-calibrating it but it won't accept my touch which tells me the screen is no longer enabled.
I tried finding where to enable and could not find where to enable finger touch. I've also tried looking for driver updates and the driver appears to be up to date.
Thanks
This question was solved.
View Solution.

I have a different type of TouchSmart, but this may work for you:
Press the Windows logo key + X (if using a Windows 8 computer -- if Windows 7, click the Start button, type Device Manager, and click Device Manager in the search results).
Select Device Manager from the list.
Click the little arrow next to Human Interface Devices to expand the list.
Click the touch screen driver (in my case, NextWindow Voltron Touch Screen).
Right-click, and select Enable from the list.
Click Yes if a dialog box asks if you are sure you want to enable the touch screen driver.
On some models, it isn't obvious which device in the list controls the touch screen. I have read in other posts that some people have fixed the problem by disabling and re-enabling each device.
If that does not work, you might try going to hp.com (http://www8.hp.com/us/en/support-drivers.html) and clicking Drivers & Downloads.
In the search field, enter your product name or number, and then click Go. Select your operating system from the drop-down list under Select your operating system, and then click Next. If there are any available graphics drivers under Select a download below, click the plus sign next to Driver - Graphics, and then click the driver name. In the Download options and information window, click Download . Follow the onscreen directions to download the driver. Restart the computer.
~Lil.Liebe
Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
Click Accept as Solution on a reply that solves your issue to help others in search of answers.

Rear camera stopped working after iOS 7.1.2 update- iPhone 5

My rear camera is not working after I did 7.1.2 software update this morning. I see a blank screen when I click the camera app.

So my camera was fine until yesterday and pressing on the lens did not work so I went back to looking for solutions:
http://www.cydiaios7.com/back-camera-not-working-after-ios-7-update-solution.htm l
The article is from last year (IOS 7), but solution 1 worked for me. Here are all the solutions from the link:
Solution 1
Hold the Sleep button until you see the Slide to Power Off slider
Slide it and then immediately hold down the Sleep button again until you see the Apple logo
Solution 2
Open your Settings app
Tap General
Tap Reset
Tap Reset All Settings
While you won’t lose any of your data you will have to re-enter all of your passwords and personal settings again
Solution 3
Hold the Sleep and Home button simultaneously until the Apple logo appears
Let go of both buttons at the same time and let your iOS device boot up as normal
Solution 4
Try a different camera app instead of the stock one – downloadCamera Awesome, free of charge, from the App store
Install and both cameras should work properly.

Rear camera stopped working after iOS 7.0.2 update on iPhone 5. Why?

I just bought my iPhone 5 two days ago and it was running iOS 6.1.3. Camera was working perfectly and just after the update, I took like 2 pictures, and at first when trying to take a picture, almost half of my screen was in pink. After few attempts it just showed a black screen and app just freezes. Not only on camera app, buy on other related photo apps. Really wanted to know what's happening.

Hi there PompasJr,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
-Griff W.

IPod Nano stops working after 1.0.2 firmware update

I just updated the firmware of my ipod nano last night to 1.0.2. I was using thru out the day when it suddenly stops playing the next music in my playlist. My ipod shows the play icon but there is no sound and the play track is not moving. Tried to play a different music and videos but the same problem occurs. Tried to reset is several times but doesn't fix the problem will try to reset the firmware later when I get home.

Just got the nano 3rd gen yesterday. Already had a Nano 1st gen. Running Itunes 7.x on windows 2000 os at work (1st gen nano used there). Needed new Nano in a hurry, so went to RShack and bought one. Ran home....Itunes says wont work with Nano 3rd gen. Went to download upgrade for Itunes, and find out the upgrade won't run unless running windows XP or VISTA.... Borrrowed a laptop with XP OS and got latest Itunes. Happy...happy...joy...joy, now I can get Itunes and new Nano to work together. Now gotta get music off old Nano and into new Nano usiing borrowed laptop. (Found a program on net called 'SimpleCenter' to do this.) Xferred music from old Nano to Itunes on laptop, then transferred entire library to new Nano. (Was out of reach of wireless network while doing this, so was unable to 'UPDATE NANO' when prompted by Itunes.)
Sooo...
Took laptop over to its owners home (and wirless network) and Updated the firmware to 1.0.2. When supposedly complete, the new Nano starts to Reset continuously (Apple Logo....Menu Screen......Apple Logo.....Menu Screen....Apple Logo etc. etc.) Oh 'darn' ........
So frustrating.... Disconnected new Nano from laptop during the couple seconds the main menu was showing.
For grins went to play the solitaire game that comes with new Nano, but comes up with error message saying it (the game) won't load. (Worked fine earlier, before the 'upgrade')
Oh Mannnn..... I find that there a 'ton' of other 3rd gen Nano usere having same problem with firmware upgrade 1.0.2.
I will wait for some response from Apple on this issue for a few weeks before I take the device back to dealer. I expect that this problem will be resolved by Apple in quick order in the form of a new firmware upgrade (or something similar). I really don't want to hassle the dealer at this time, and can live with the old Nano at least until the end of November, when I will be needing both Nanos for a special event.
Gary...

Apple wired keyboard stopped working after Mac Pro SMC Firmware Update 2.0

After the update, my MacPro will not deetect/accept the keyboard. My old keyboard (White plastic) works, my new (approx 6 months) aluminum wired keyboard don't. Keyboard tested on other Macs - no problem there.
Anybody know why/how to fix/have a solution?

SMC Reset and PRAM Reset are the conventional ways to deal with such problems.

The Mail app stopped working after i made the last update

hi,When I make update ,uopn finishing,the Mail app stopped working

Welcome to the Apple Support Communities
Go to  > About this Mac and copy Version. If you have 10.6.8, see > http://support.apple.com/kb/TS4424

Some functionality of the move tool stopped working after Photoshop Elements 12.1 update

After updating to Photoshop Elements 12.1, the move tool can not be used to drag and drop one photo onto another (when more than one photo file is opened). Please advise.
Ted

This is a new bug with the 12.1 update. If you are in 'Tabs' view then dragging from one tab to another does not shift the image focus so you can never drop. A bug report for it has been created at http://feedback.photoshop.com.
Workaround is to switch to tiled view (Window> Images> Tile in Expert view) and tile your images side-by-side then you can drag and drop.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Workrave stopped working after xorg 1.6.0 update

Workrave no longer detects mouse / keyboard events; but I can't find any way of debugging the problem. Does anyone else run workrave, and experience the same problems? The problem is visible from the statistics view; no updates are visible

Thanks for the link to patch. Today I make a fresh install of archlinux. Compilation of workrave stops at missing /usr/include/X11/extensions/record.h. I have installed recordproto.
Can you help me to find out which package I'm missing?
$ cd backend/src/unix/
$ make
/bin/sh ../../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../../.. -W -I../../../backend/src -I../../../backend/include -DWORKRAVE_PKGDATADIR="\"/usr/share/workrave\"" -D_XOPEN_SOURCE=600 -I ../../../common/include -I ../../../common/include/unix -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DORBIT2=1 -pthread -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -Os -g -DNDEBUG -MT libworkrave_backend_unix_la-X11InputMonitor.lo -MD -MP -MF .deps/libworkrave_backend_unix_la-X11InputMonitor.Tpo -c -o libworkrave_backend_unix_la-X11InputMonitor.lo `test -f 'X11InputMonitor.cc' || echo './'`X11InputMonitor.cc
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../../.. -W -I../../../backend/src -I../../../backend/include -DWORKRAVE_PKGDATADIR=\"/usr/share/workrave\" -D_XOPEN_SOURCE=600 -I ../../../common/include -I ../../../common/include/unix -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DORBIT2=1 -pthread -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -Os -g -DNDEBUG -MT libworkrave_backend_unix_la-X11InputMonitor.lo -MD -MP -MF .deps/libworkrave_backend_unix_la-X11InputMonitor.Tpo -c X11InputMonitor.cc -fPIC -DPIC -o .libs/libworkrave_backend_unix_la-X11InputMonitor.o
In file included from X11InputMonitor.cc:71:
X11InputMonitor.hh:31:35: error: X11/extensions/record.h: Adresár alebo súbor neexistuje
In file included from X11InputMonitor.cc:71:
X11InputMonitor.hh:77: error: 'XRecordInterceptData' has not been declared
X11InputMonitor.hh:78: error: 'XRecordInterceptData' has not been declared
X11InputMonitor.hh:79: error: 'XRecordInterceptData' has not been declared
X11InputMonitor.hh:80: error: 'XRecordInterceptData' has not been declared
X11InputMonitor.hh:81: error: 'XRecordInterceptData' has not been declared
X11InputMonitor.hh:82: error: 'XRecordInterceptData' has not been declared
X11InputMonitor.hh:84: error: 'XRecordInterceptData' has not been declared
X11InputMonitor.hh:124: error: 'XRecordContext' does not name a type
X11InputMonitor.cc: In constructor 'X11InputMonitor::X11InputMonitor(const std::string&)':
X11InputMonitor.cc:150: error: 'xrecord_context' was not declared in this scope
X11InputMonitor.cc: At global scope:
X11InputMonitor.cc:411: error: variable or field 'handle_xrecord_handle_key_event' declared void
X11InputMonitor.cc:411: error: 'XRecordInterceptData' was not declared in this scope
X11InputMonitor.cc:411: error: 'data' was not declared in this scope
X11InputMonitor.cc:427: error: variable or field 'handle_xrecord_handle_motion_event' declared void
X11InputMonitor.cc:427: error: 'XRecordInterceptData' was not declared in this scope
X11InputMonitor.cc:427: error: 'data' was not declared in this scope
make: *** [libworkrave_backend_unix_la-X11InputMonitor.lo] Error 1

My Ipod touch email stopped working after installing Update

my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

Hi, jewlssch.
Thank you for visiting Apple Support Communities.
If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail. If the issue persists, process a reinstall of Mavericks.
Reinstall OS X
http://support.apple.com/kb/PH10763
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason

CS4 OpenGL stops working after a few minutes of painting

Hi,
CS4 OpenGL stops working after a few minutes of painting. It doesn't seem to have anything to do with the amount I paint. If I save the file, then reopen I can paint for another few minutes before the opengl stops working. Is this a standard problem with CS4? Is there a solution? Thanks! PJ
System Specs:
Windows XP SP3, updated
Latest DirectX & all software updated
Nvidia Geforce 9600 GT 512MB w/ latest driver
Athlon64 X2 Dual 3800+
2GB RAM
Photoshop CS4

Joining the party...
I am having the EXACT same issue, PLUS my Wacon PTZ-430 only works for a fewminutes then, when the Open GL craps out, so does it... but only certain aspects. The cursor still moves, it just will not paint. Mouse will (direct via USB) but the tablet won't. If I delete CS4 prefs, then the Wacom works fine... for a while. Latest Wacom drivers and bee on the phone w them. All is fine under CS3.
From DXDiag:
System Information
Time of this report: 12/8/2008, 15:37:52
Machine name: VM-EDITING
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.080814-1236)
Language: English (Regional Setting: English)
System Manufacturer: VELOCI
System Model: 122-CK-NF68
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz (2 CPUs)
Memory: 2814MB RAM
Page File: 1049MB used, 3652MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Dual Monitor:
NVIDIA GeForce 8600 GT
Manufacturer: NVIDIA
Chip type: GeForce 8600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_043910DE&REV_A1
Display Memory: 256.0 MB
Current Mode: 1920 x 1200 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0011.7824 (English)
DDI Version: 9 (or higher)
Second:
Card name: NVIDIA GeForce 8600 GT
Manufacturer: NVIDIA
Chip type: GeForce 8600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_043910DE&REV_A1
Display Memory: 256.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0011.7824 (English)
DDI Version: 9 (or higher)

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

Wacom Bamboo stopped working after OS 10.9.4 update

Similar Messages

Maybe you are looking for