Wacom intros5 and dual monitors not working

I know there are issues with Mavericks, dual monitors & USB, but I have a problem with my Intuos5 tablet: since installing Mavericks it no longer maps to both monitors. Changing settings under monitors and wacom sys prefs does not change anything. It will only map to monitor 1.
in fact mapping under the wacom sys prefs doesn't seem to work at all.
Any ideas other than going back to ML or waiting for a new driver?
Anyone seen behaviour like this?
Thanks

The hatter wrote:
You realize you do need graphic driver, and Nvidia has Windows 7 (32/64), and ATI is suppose to have a universal driver. No mention of what your card is. And I would hope x64.
Good grief, but please a) don't use Apple drivers, b) always use the "troubleshoot compatibility" for any installer (control+click on the application) before running. Apple is treated as not supported and won't install (now) with build 7077 (after feedback finding it causes errors, love the way their feedback and testing really does work).
Boot Camp can 'doorstop' in some cases a good installation.
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0
Use Driver Sweeper and then reinstall the latest compatible driver. And no, dual monitors does work.
mine is the ati radeon 2600 hd xt and it worked flawlessly up until about 2-4 days ago,
oh well, xp pro it is then,
i dont want the headache of dealing with windows 7 beta!
xp should be fine to use correct?
will there be any other steps i will need to take in order for everything to function together well?
thanks

Similar Messages

  • Dual monitors not working in bootcamp?

    Recently added 8 more gigs of ram, and after this my video driver shows a triangle with an ! under bootcamp running windows 7,
    i have tried countless times to update the driver to no evail
    even used the bootcamp drivers from the original discs to repair bootcamp and nothing has helped!!
    what can i do?
    before the memory upgrade the monitors worked fine under bootcamp, but now they only show 1 and will not show both!!
    thanks!!
    (possibly a windos 7 issues?)

    The hatter wrote:
    You realize you do need graphic driver, and Nvidia has Windows 7 (32/64), and ATI is suppose to have a universal driver. No mention of what your card is. And I would hope x64.
    Good grief, but please a) don't use Apple drivers, b) always use the "troubleshoot compatibility" for any installer (control+click on the application) before running. Apple is treated as not supported and won't install (now) with build 7077 (after feedback finding it causes errors, love the way their feedback and testing really does work).
    Boot Camp can 'doorstop' in some cases a good installation.
    http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0
    Use Driver Sweeper and then reinstall the latest compatible driver. And no, dual monitors does work.
    mine is the ati radeon 2600 hd xt and it worked flawlessly up until about 2-4 days ago,
    oh well, xp pro it is then,
    i dont want the headache of dealing with windows 7 beta!
    xp should be fine to use correct?
    will there be any other steps i will need to take in order for everything to function together well?
    thanks

  • Dual monitor not working under Boot Camp on Mac Pro ATI HD 2600 XT

    Recently got a brand new Mac Pro with ATI Radeon HD 2600 XT graphics card.
    On the Mac side (Leopard), everything works perfectly: my second monitor (a plasma screen connected with HDMI to the second DVI of the ATI card via HDMI/DVI adapter) is fully recognized and it works as an extended desktop or in Mirroring mode.
    Under Boot Camp (Windows XP Pro) however, NOTHING: the second monitor always appears in the display properties, but it is grayed out (inactive), and when I try to activate it, it switches back to being grayed out immediately and nothing gets displayed on it.
    After reading all the posts I can find on the topic, I tried the following (in pretty much every possible combination - Thank god for WinClone that allows me to restore the Boot Camp basic install image without having to reinstall Windows from scratch every time):
    a) Bootcamp 2.0 (installed by default by Bootcamp assistant)
    b) Update to Bootcamp 2.1
    1) Windows XP Pro SP2c vanilla install (from my Windows XP pro install disk)
    2) Update to Windows XP SP3 (I tried with and without BC 2.1: both worked -> BC 2.1 didn't seem to be required for SP3 - maybe because this is a mac pro and not a MB or MBP)
    i) ATI drivers installed by default by Boot Camp assistant (BC 2.0) or by BC 2.1
    ii) Latest ATI drivers found on ATI web site specifically under Boot Camp / Mac Pro.
    Note: Interestingly, the catalyst installer worked ok (provided .NET framework 2.0 is installed though), but it seems that the Radeon BootCamp/Mac Pro driver set itself from ATI's web site does NOT include a driver for the HD 2600 XT - so when I install this driver set, it tells me that no compatible hardware was found...
    iii) Latest ATI drivers found under Windows XP (these did include one driver specifically for the Radeon HD 2600 XT)
    NOTHING seems to work. I read posts (most of the from late last year) about ATI Catalyst utility showing a 3rd monitor at some point, but I never got any 3rd monitor showing in any of my many many trials with Catalyst. I have yet to get a single image appear on my plasma under Bootcamp Windows. I don't believe its the hardware because everything works great on the max OS X side.
    I am actually considering switching to an NVidia 8800 GT just to get the dual screen to work under BootCamp/Windows XP because I really need it and I read everywhere that drivers for NVidia are far better than ATI ones.
    Any advice? What should I try next before getting an 8800 ?
    Is there a diagnostic utility that I can use to test my config including the GC?
    Thanks!

    Hi there aside from my laptop I have an iMac 20" with the same HD 2600 XT card. I recently installed the Catalyst 8.6 driver by using a driver mod from driverheaven, I use Vista 32. By installing it this way I got boosted performance and many issues with the bootcamp drivers were fixed. As you may already know the ATI drivers do not install on bootcamped macs usually but the mod tool fixes this. Its unofficial so do so at your own risk but try it out and see if you get the second monitor if not just rollback. Hope this helps and I didn't want to say too much about the 8.6 driver mod because it may not be allowed here but google will provide any answers.

  • Buttons under source and record monitors not working

    For some odd reason, the buttons under the source and record monitors are not working in Premiere. This is a new install, and I'm relatively new to Windows so I hope it is something obvious. Buttons in other CC apps work fine. Any ideas out there?
    Windows 7
    2 x 10 core CPU (40 virtual)
    64 GB Ram
    nVidia Titan
    Decklink 4K
    Latest Premiere CC build
    Wacom Tablet

    Yes, actually. I unplugged the Wacom, uninstalled the drivers and restarted. Problem still there. Other ideas?
    Chris
    =========================================
    Edited by moderator to remove personal information

  • Mavericks and Dual Display not working as documented

    Hi all. Ok..something a little wierder here for my dual display scenario. I have two Samsung Syncmaster 2443 monitors. 15" MBP Retina purchased this year. Running in Clamshell Mode.
    I can get dual monitors happening (extended) but I cannot get the menu bar to come over as well. As mentioned in other posts, I need to tick the box in Mission Control "Displays have seperate spaces". The only problem is, that particular menu item is NOT there. All I have is the other 4 items. So how is it that this menu item does not exist on my installation?
    In this current setup, each time I reboot the display's also get reveresed, which is really annoying. I have to reboot twice to get back to my original layout.
    Any idea's?
    Tks

    you're faking out your machine to THINK it has 2 real displays and you expect Keynote to work? Keynote is THE most intense app I've ever seen for screen drawing. It basically takes over your entire machine to do its work. It doesn't surprise me that that trick doesn't work with it.
    My guess is you're going to have to wait till you have the actual projector and adapter to test your dual screen setup.

  • [solved] xorg 1.6 - dual-monitor not working any more

    I switched to arch64 and with it came the new xorg 1.6. Now X won't start with the configuaration I used before and I can't figure out what to do about it.
    I want to use two monitors (laptop + external) with an Intel X4500 HD und xf86-video-intel. I found out, that it doesn't like the virtual screen I defined. If I remove that line everything works fine for the laptop-monitor. With the virtual screen defined I get an error in xorg.0.log
    Failed to pin back buffer
    The xorg.conf that worked until now (= my previous arch installation) looks like this:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dri"
    Load "dbe"
    Load "record"
    Load "glx"
    Load "dri2"
    Load "extmod"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "CacheLines" # <i>
    #Option "Dac6Bit" # [<bool>]
    #Option "DRI" # [<bool>]
    #Option "NoDDC" # [<bool>]
    #Option "ShowCache" # [<bool>]
    #Option "XvMCSurfaces" # <i>
    #Option "PageFlip" # [<bool>]
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    Option "VBEModes" "true"
    Option "EnableAGPDMA"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Depth 24
    Modes "1440x900" "1280x1024" "1024x768"
    Virtual 2880 2880 # this line seems to be problematic?
    EndSubSection
    EndSection
    I use "xrandr --output VGA --mode 1280x1024 --left-of LVDS" in .xinitrc to arange the displays.
    So anyone any idea why it won't work?
    Btw: I tried x86-video-intel-legacy. But then X didn't even start
    Last edited by golwin (2009-04-18 21:58:08)

    Ok, I fixed it. Just added
    Option "AccelMethod" "UXA"
    Option "Legacy3D" "False"
    to my device-section in xorg.conf. EXA produces the error above.
    Maybe I'm looking at the wrong point, but could someone give me a hint where I can learn more about UXA/EXA. The problem seems somehow solved, but I'd like to learn more about this and would like to understand what the problem was. Right now I don't even know what makes the difference between UXA and EXA It just works.
    And somehow google doesn't make it a lot clearer for me right now...

  • Dual monitor not working in 2012R2 essentials anywhere access

    Hi
    I tried to connect to 2012R2 Ess anywhere access (Remote portal) from a W7Pro client using two monitors.
    Only one monitor gets used though. Can Anywhere Access be configured to enable dual monitor use in RDP sessions?
    Many thanks
    Rgds
    Willem

    Hi Willem,
    As per my research, dual monitor is supported but for that to get access you need to have Windows 7 Enterprise or Ultimate version. Win 7 Pro client doesn’t support. 
    Apart this issue seems more related to Essential Forum, for detail you can ask in our Essential Forum over here for more accurate details.
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserveressentials
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Source and Program Monitor not working after October CC 2014 Update

    I updated to the October 2014 Replace of Premiere Pro and since then I have had major issues with the Source and Program monitors. 
    I can select a clip from the media browser and have it appear in the source monitor - click play.  The clip will play for a bit and the picture will stop, but the audio will keep going. After a few seconds the source monitor will just display a red screen and the audio will keep going.   The same things happens in the program monitor  (different clips that worked before the October 2014 update) will start displaying the yellow media pending screen - and then go to red after a few seconds.  Again - this is a mutli-camera sequence that worked before the October 2014 update. 
    I am pretty much dead in the water at this point.  And yes, I have rebooted, changed the Mercury play back engine from hardware to software.  Nothing seems to correct the issue. 

    I have had similar problems. In fact playback is so sluggish it is unworkable.
    In addition Audio in nested sequences doesn't play back, and when it does it is intermittent. Totally unworkable!

  • Dynadock U3 - Dual monitors not working using Win 7

    So in October i upgraded to Windows 8 when it came out and it didnt work properly with my Dynadock docking station.
    So i downgraded to Windows 7 using a copy i got through my school that didnt have the proper drivers for Satellite laptops.
    So last week i finally got a recovery disk from Toshiba for my laptop and reinstalled windows 7 with all the proper drivers for the laptop.
    After doing this i reinstalled the Toshiba Dynadock Drivers and tried to set it up with my laptop.
    The mouse and keyboard attached to the Dynadock station work properly with the laptop but the external monitor doesnt work at all.
    What can i do to get the external monitor working?
    Btw my BIOS is up to date as is everything else so everything should work properly. it doesnt make any sense....

    Yes it did
    it worked perfectly fine when i originally ran it on windows 7 so i think its a software issue
    but i bought the recovery disk to get my PC back to its state of when i bought it which should be like it was when i originally had it as Windows 7 but it still doesnt work
    also the keyboard and mouse attached to the docking station are a bit glitchy, sometimes it will print out a lot of a letter when i press it once. I hate this and its really getting me annoyed with Toshiba because according to the the technical support i phoned, if i bought the recovery disk, it would get the docking station working properly....
    so now i dished out $38 for a recovery disk for nothing :/
    Message was edited by: AlexB_1

  • Display settings and 2nd monitor not working

    Hi everyone, I have a tx2510 and Samsung 24 inch monitor. I have been using the Samsung as my monitor for months now with no issues. I went away with my laptop for a week and came back yesterday, hooked the analog monitor cable in, used it last night, eveything was fine, put it on hibernate and went to bed. This morning when I turned it back on, I got a floating Check Signal Cable box on the Samsung and no image at all on the notebook's screen. There is nothing wrong with the cable, connections were snug, it hadn't been touched since last night.
    If I unplug the cable from the notebook, I do get an image pop back up on the notebook screen. So I went into Display Settings to see what was what and became more confused. The Samsung is listed as the #1 monitor, yet when I click the Identify Monitors box, the #1 shows on my notebook screen? And instead of 1920 by 1200, 1280 by 800 is shown as the max res. The "This is my main monitor" and "Extend the monitor onto this desktop" options are both grayed out.
    #2 monitor is initially grayed but if I select it, it reads as "Default Monitor" with a max res of 800 by 600. Natural res for the tx2510 screen is 1280 by 800. If I select #2 and apply, it confirms, and then when I go back in to Display Settings, it's back to #1 (Samsung, even though the only image I can get is on the notebook's screen).
    It's hard to troubleshoot this issue because as soon as I plug the monitor cable in, my notebook goes black and I have nothing to work with.
    It's probably something simple but I really have no idea what to do next, drivers are current, I tried restarting, unplugged the battery, replugging the monitor cable. I need my 24" screen back!!! Any ideas appreciated...

    Disconnect all the peripherals and the battery and press and hold the power button for 20 secs... start the notebook and connect the samsung monitor... press Fn+F4 keys to cycle the display.....
    ||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
    //Click on Kudos if my reply was helpful and answered your question//
    ||-If my answer solved the problem please mark the topic as the accepted solution-||

  • NVIDIA Dual Monitor not working

    I have two monitors, 1 QNIX 1440p running at 100hz that is properly working, the other, and 1080p Asus at 60hz is running at 1024x768.
    Here is my xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings:  version 331.20  (buildmeister@swio-display-x86-rhel47-05)  Wed Oct 30 18:20:32 PDT 2013
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig:  version 331.20  (buildmeister@swio-display-x86-rhel47-05)  Wed Oct 30 18:20:53 PDT 2013
    #Section "Device"
    #    Identifier    "Device1"
    #    Driver        "nvidia"
    #    VendorName    "NVIDIA Corporation"
    #    Screen        1
    #EndSection
    Section "ServerLayout"
    # Removed Option "Xinerama" "1"
        Identifier     "DualScreen"
        Screen      0  "Screen0" 0 0
        Screen      1  "Screen1" 2560 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Mouse0" "CorePointer"
        Option         "Xinerama" "0"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/psaux"
        Option         "Emulate3Buttons" "no"
        Option         "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Keyboard0"
        Driver         "kbd"
    EndSection
    Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Unknown"
        ModelName      "DFP-3"
        DisplaySize     597    336
        HorizSync       88.8 - 160.0
        VertRefresh     59.5 - 120.0
        ModeLine       "2560x1440" 241.50 2560 2608 2640 2720 1440 1443 1448 1871 +hsync -vsync
        ModeLine       "2560x1440_60" 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync
        ModeLine       "2560x1440_75" 397.25 2560 2760 3040 3520 1440 1443 1448 1506 -hsync +vsync
        ModeLine       "2560x1440_85" 454.75 2560 2768 3048 3536 1440 1443 1448 1514 -hsync +vsync
        ModeLine       "2560x1440_96" 400.00 2560 2608 2640 2744 1440 1443 1448 1512 +hsync +vsync
        ModeLine       "2560x1440_100" 400.00 2560 2608 2640 2720 1440 1443 1448 1481 +hsync +vsync
        ModeLine       "2560x1440_100" 542.25 2560 2776 3056 3552 1440 1443 1448 1527 -hsync +vsync
        ModeLine       "2560x1440_120" 661.25 2560 2784 3064 3568 1440 1443 1448 1545 -hsync +vsync
    EndSection
    Section "Monitor"
    #    HorizSync       88.8 - 160.0
    #    VertRefresh     59.5 - 120.0
        Identifier     "Monitor1"
        VendorName     "Unknown"
        ModelName      "DFP-0"
    #    HorizSync       28.0 - 55.0
    #    VertRefresh     43.0 - 72.0
        ModeLine       "1920x1080_60" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync
        Option         "Enable" "True"
        Option         "DPMS"
    EndSection
    Section "Device"
        Identifier     "Device0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "GeForce GTX 660"
        BusID          "PCI:1:0:0"
        Screen          0
    EndSection
    Section "Device"
        Identifier     "Device1"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "GeForce GTX 660"
        BusID          "PCI:1:0:0"
        Screen          1
    EndSection
    Section "Screen"
    # Removed Option "metamodes" "DVI-I-1: 2560x1440_100 +2560+0, DVI-D-0: 2560x1440_100 +0+0; DVI-I-1: 2560x1440_96 +0+0, DVI-D-0: 2560x1440_96 +2560+0; DVI-I-1: 2560x1440_85 +0+0, DVI-D-0: 2560x1440_85 +2560+0; DVI-I-1: 2560x1440_75 +0+0, DVI-D-0: 2560x1440_75 +2560+0; DVI-I-1: 2560x1440_60 +0+0, DVI-D-0: 2560x1440_60 +2560+0; DVI-I-1: 2560x1440 +0+0, DVI-D-0: 2560x1440 +2560+0"
    # Removed Option "metamodes" "DVI-I-1: 1920x1080 +2560+0, DVI-D-0: 2560x1440_100 +0+0"
        Identifier     "Screen0"
        Device         "Device0"
        Monitor        "Monitor0"
        DefaultDepth    24
        Option         "UseEDID" "False"
        Option         "UseEDIDDPI" "False"
        Option         "UseEDIDFreqs" "False"
        Option         "ExactModeTimingsDVI" "True"
        Option         "ModeValidation" "AllowNonEdidModes, AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, NoEDIDModes"
        Option         "TwinView" "0"
        Option         "Stereo" "0"
        Option         "metamodes" "DVI-D-0: 2560x1440_100 +0+0"
        Option         "SLI" "Off"
        Option         "MultiGPU" "Off"
        Option         "BaseMosaic" "off"
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection
    Section "Screen"
    # Removed Option "metamodes" "DVI-I-1: 1920x1080_60.00 +2560+0"
    # Removed Option "metamodes" "DVI-I-1: 1920x1080_60 +0+0"
        Identifier     "Screen1"
        Device         "Device1"
        Monitor        "Monitor1"
        DefaultDepth    24
        Option         "UseEDID" "False"
        Option         "UseEDIDDPI" "False"
        Option         "UseEDIDFreqs" "False"
        Option         "ExactModeTimingsDVI" "True"
        Option         "ModeValidation" "AllowNonEdidModes, AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, NoEDIDModes"
        Option         "TwinView" "0"
        Option         "Stereo" "0"
        Option         "metamodes" "DVI-I-1: 1920x1080 +0+0"
        Option         "SLI" "Off"
        Option         "MultiGPU" "Off"
        Option         "BaseMosaic" "off"
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection
    Thanks in advance for any help you can give.

    Hi GloW_on_dub,
    Here's the output :
    Screen 0: minimum 8 x 8, current 2480 x 1050, maximum 16384 x 16384
    DVI-I-0 connected primary 1680x1050+0+0 (normal left inverted right x axis y axis) 473mm x 296mm
    1680x1050 60.0*+
    1600x1200 60.0
    1440x900 59.9
    1280x1024 75.0 60.0
    1280x960 60.0
    1152x864 75.0
    1024x768 75.0 70.1 60.0
    800x600 75.0 72.2 60.3 56.2
    640x480 75.0 72.8 59.9
    DVI-I-1 disconnected (normal left inverted right x axis y axis)
    HDMI-0 disconnected (normal left inverted right x axis y axis)
    DP-0 disconnected (normal left inverted right x axis y axis)
    DVI-D-0 connected 800x600+1680+0 (normal left inverted right x axis y axis) 0mm x 0mm
    800x600 60.3*+
    DP-1 disconnected (normal left inverted right x axis y axis)

  • Dual Monitor not working for Mac Pro (Early 2008)

    Upon upgrading from Lion to Mountain Lion yesterday I lost the ability to use my secondary monitor. Checking in System Preferences it indicates that it only sees one monitor, but nothing has changed with my hardware configuration. Is anyone else having this problem?
    Hardware specs:
    Processor  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory  26 GB 800 MHz DDR2 FB-DIMM
    Graphics  ATI Radeon X1900 XT 15 MB
    Software  OS X 10.8 (12A269)

    Not sure if this has any relation to yours, but I thought I would throw it out there...
    After installing Mountain Lion, the secondary monitor for my 27" iMac would not wake up after the computer slept. In the System Preferences, there was only the main display listed. The secondary monitor was visible from a cold boot, but disappeared once the computer slept and was woken up.
    I found that waking the system with the Magic Trackpad would not also wake the second monitor. When I wake the computer by using the keyboard, the second monitor wakes normally! I've repeated this several times... Strange.

  • Mountain Lion 1.8.2 update made my dual monitor stop working on Mac Pro mid 2012

    Just done Apple's update for Mac OS X Mountain Lion to 1.8.2 and after rebooting my dual monitor stopped working.
    If I go on preferences -> Displays it shows me only one of my two monitors, even if I invert the connections the 2nd monitor doesn't shows up and there seems no way to enable it again.
    Any suggestion?
    P.S. I already tried to set from "Best for display" to "Scaled", but after rebooting Mountain Lion 1.8.2 reset it to "Best for display"

    Ok,
    did some extra test here, but first of all my configuration:
    Mac Pro (Mid 2012) with ATI Radeon HD 5870 1GB.
    2 LCD 24" Wide-screen (1st monitor Hyundai W240D and 2nd Monitor HP w2448hc), both LCD worked perfectly until reboot after installing OS X 1.8.2
    After reboot only the 1st monitor wored fine, the 2nd not even listed, so tried to invert cable connections on the 2 miniports on the ATI video card, but nothing changed, still only the 1st monitor working.
    Did a second test, disconnected the 1st monitor and connected ONLY the 2nd and now the second works fine.
    Tried to connect 2nd monitor on a different miniport, and i still works fine.
    Updated my MacBook Pro to 1.8.2 (it as an nVidia card) and connected my 2nd monitor to it and everything works fine, both the laptop LCD and my HP LCD are working fine.
    So it looks like Apple screwed up the ATI driver on the latest 1.8.2, now only ONE miniport is active.
    To all users with the same Mac Pro configuration: hold to update to Mountain Lion 1.8.2 until Apple fix this driver issue.
    More info are on the Console output, so will have to contact Apple on-line support to signal this bug.

  • Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

    Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

    I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
    It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
    Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
    Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
    Dual 1.8 G5   Mac OS X (10.4.3)   1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera

  • TouchSmart and dual monitors - lag time

    I have the HP TouchSmart 320 PC and have set up the connection with a second and third monitor. I had to purchase a seperate piece to connect them. When I first connected them, they were working perfectly. However, I had to take my PC to get it cleaned due to some viruses. Now there is a huge lag time between my main PC and dual monitors. For example: if I play a video, it will not show up on the dual monitor but will play on my main PC. How can I fix this to where they sync up better? 

    Hello,
    What is the exact model of the 320 PC you have?
    What are the other monitors brand and models and what piece have you bought to connect those monitors to your unit?
    Can you explain the setup or even provide pictures of the setup?
    Thanks,
    I work for HP! Please remember to provide and if this helped click ON

Maybe you are looking for