Wacom Intuos 5 with Wireless Accessory and Thunderbolt Display

It appears to be that the new Apple Thunderbolt display is interfering somehow with the Wacom wireless accessory kit. Everything works fine with 2 different thunderbolt computers I've tried it on. When I plug the Thunderbolt display in (Wacom wireless reciever always in Mac's USB port), it works, for a very short time, starts to stutter and become very unresponsive and then the tablet just loses connection. I have been able to duplicate this now several times. Unplug the Thunderbolt connection on the Apple Display from the computer, and the tablet works fine again with the Wacom Wireless Accessory. The Intuos 5 tablet works fine via a direct USB connection with the Thunderbolt display plugged in. It is the wireless connection that fails.
I have 10.7.3 installed and the latest Wacom Dirver (of which I have also tried to remove and reinstall).

I had the same problem with LR CC, W 8.1 and Wacom.
This worked for me:
http://www.makeuseof.com/tag/how-to-best-use-or-disable-the-windows-8-touch-keyboard/

Similar Messages

I'm confused about running an external graphics card with my MBP and Thunderbolt display

I have a new MBP 13" (not retina) with these specs,
Processor 2.9 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 512 MB
Software OS X 10.8.2 (12C60
My radio control airplane/helicopter flight sim runs slow. Message reads "Warning FPS to low".
I've been reading about using an eGPU but the info seems to be conflicting. Can I or can I not do this? If I can, what do I need?
This is my first Mac and with this one exception I love it. Thanks for any input you folks might provide.
John

AFAIK, there are PCIe TB adapters like this - http://eshop.macsales.com/item/OWC/HELIOSTB1/ - but I don't know that you can use a graphics card in them with a MBP. You might want to give OWC a call, though, and see if they know of someway to bypass the onboard GPU through a PCIe card.
Good luck,
Clinton

Macbook pro 17 inch primo 2011 and thunderbolt display crashes

I have a Macbook pro 17 inch primo 2011 and thunderbolt display which has recently started to crash.
Only modifications I have doen lately is I swapped the CD/DVD drive for a harddrive and put in 16 GB of ram
but it has been running for more than a month with these hardware additions without problems.
Today my Macbook has started to crash frequently within 10 min to 1 hour after plugging in my thunderbolt display.
I tried to check CPU heat, change RAM but it keps crashing.
When it crashes it either gives me a blue screen, a black screen or a distorts everythings and freeze up.
When rebooting I have to press Command-Option-P-R to clear NVRAM / PRAM.
I found a few support threads from people having similar problems so I started to disconnect the thunderbolt display
and without plugging it in my laptop works fine.
I have done a SMC reset also but that has not resolved my issue.
Below is the crash report and if anybody has any suggestions what to do to resolve this please let me know
My thunderbolt display was purchased in late 2011
If this is not solveable what options do I have ?
Thanks !
Interval Since Last Panic Report: 2527129 sec
Panics Since Last Report:          6
Anonymous UUID:                    5309BD58-3CBB-321E-545E-6EE6BED7E0E2
Tue Feb 5 17:02:21 2013
Machine-check capabilities 0x0000000000000c09:
family: 6 model: 42 stepping: 7 microcode: 26
Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Processor 0: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code:            0x0400
Model specific error code: 0x0080
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85769a95
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 1: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code:            0x0400
Model specific error code: 0x0080
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85769a95
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 2: no valid machine-check state
Processor 3: no valid machine-check state
Processor 4: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code:            0x0400
Model specific error code: 0x0080
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85fa3e1f
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 5: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code:            0x0400
Model specific error code: 0x0080
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85fa3e1f
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 6: no valid machine-check state
Processor 7: no valid machine-check state
panic(cpu 0 caller 0xffffff80048b83c9): "Machine Check at 0xffffff7f85769a95, registers:\n" "CR0: 0x000000008001003b, CR2: 0x000000010cd0e30c, CR3: 0x00000000072b4000, CR4: 0x00000000000606e0\n" "RAX: 0xffffff802516f800, RBX: 0xffffff802516f800, RCX: 0xffffff80253ab800, RDX: 0x0000000000000001\n" "RSP: 0xffffff8207ad3e90, RBP: 0xffffff8207ad3ec0, RSI: 0xffffff8207ad3edf, RDI: 0xffffff802520e000\n" "R8: 0xffffff8004ebec60, R9: 0x7fffffffffffff00, R10: 0xffffff8004ebdc20, R11: 0x0000000000000201\n" "R12: 0xffffff80253ab800, R13: 0xffffff81d60d2000, R14: 0xffffff8207ad3edf, R15: 0xffffff802520e000\n" "RFL: 0x0000000000010282, RIP: 0xffffff7f85769a95, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2050.18.24/osfmk/i386/trap_native.c: 280
Backtrace (CPU 0), Frame : Return Address
0xffffff800470bd20 : 0xffffff800481d626
0xffffff800470bd90 : 0xffffff80048b83c9
0xffffff800470bf00 : 0xffffff80048cedbf
0xffffff8207ad3ec0 : 0xffffff7f856d75b4
0xffffff8207ad3ef0 : 0xffffff8004c472a8
0xffffff8207ad3f30 : 0xffffff8004c45daa
0xffffff8207ad3f80 : 0xffffff8004c45ed9
0xffffff8207ad3fb0 : 0xffffff80048b26b7
      Kernel Extensions in backtrace:
         com.apple.driver.AirPort.Brcm4331(602.15.22)[5BDCA43F-AD42-3F05-BCCF-BC364D17E1 5F]@0xffffff7f856ca000->0xffffff7f858bbfff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f84e72000
            dependency: com.apple.iokit.IO80211Family(500.15)[4282DF5A-86B9-3213-B9B1-675FAD842A94]@0xf fffff7f8565e000
            dependency: com.apple.iokit.IONetworkingFamily(3.0)[28575328-A798-34B3-BD84-D708138EBD17]@0 xffffff7f85015000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000004600000
Kernel text base: 0xffffff8004800000
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 6197670207287
last loaded kext at 6133447331639: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f86cb5000, size 16384)
last unloaded kext at 5379727445407: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f86cb2000, size 12288)
loaded kexts:
com.apple.driver.AppleUSBCDC          4.1.22
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.filesystems.smbfs          1.8
com.apple.filesystems.afpfs          10.0
com.apple.nke.asp_tcp          7.0.0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.filesystems.ntfs          3.10
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.1f2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleIntelHD3000Graphics          8.0.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.kext.AMDFramebuffer          8.0.0
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.AMDRadeonAccelerator          1.0.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleMuxControl          3.2.11
com.apple.driver.AppleIntelSNBGraphicsFB          8.0.0
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleIRController          320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleUSBHub          5.2.5
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport          2.1.1
com.apple.iokit.IOFireWireSBP2          4.2.0
com.apple.security.SecureRemotePassword          1.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleSMC          3.1.4d2
com.apple.iokit.IOAcceleratorFamily          19.0.26
com.apple.kext.AMD6000Controller          8.0.0
com.apple.kext.AMDSupport          8.0.0
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.driver.CoreStorage          274.7
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.1.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.I
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 16 GB, SMC 1.70f5
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F384758334D314131333333433920
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: APPLE SSD TS256C, 251 GB
Serial ATA Device: ST750LX003-1AC154, 750,16 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0246, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 6
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc51b, 0xfd130000 / 5
USB Device: iPhone, apple_vendor_id, 0x12a0, 0xfd120000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
FireWire Device: My Book 111D, WD, 800mbit_speed

The other day I got the blue screen, the fan going on high, and then when I disconnect my thunderbolt connection from my macbook pro - i get a shutdown.
Today I got flickering followed by the fan on high and then again I disconneced my thunderbolt cable and after a minute or two a shudown.
This never happened before. Actually I was suprised to hear about a firmware update for flickering since that's never happened to me but since updating I now get the flicker.
Any ideas?? Any help would be greatly appreciated as this is my work labtop.

MBPr Windows and Thunderbolt Display

Hi there,
I am trying to have my MBPr and Thunderbolt Display working under bootcamp with Windows 8. All the peripherals attached to the TBD are working fine but the display remains black/off. I am pretty sure that a solution exists but can't find the right. I've tried and under Windows 7 behavior still the same, whereas under MacOSx TBD display works fine.
Thanks for you support !
RV

I made the usb stick back when I installed windows 7 that made my imacs amd gpu see the monitor connected as it did in osx and in the same was as any other windows computer with a connected extra screen
(so I turn it on in windows display settings and maybe the amd catalyst software i forget)
when I upgraded to win8 it just used the win7 driver and it still worked fine
same when I later got te official win8 drivers from apple

Initial set up with wireless keyboard and mouse!!

My gods, I set up a mac mini with wireless keyboard and mouse. It stead fastly refused to find the brand new apple wireless mouse. I had to plug a wacom in, in the end to get anywhere. Then it would not find the keyboard, again apple wireless. It did find the keyboard but when it started the pairing just came up with no keyboards were found.
I struggled in the end and after around 10 minutes blagged the keyboard, I don't know how it just suddenly worked.
Thinking about this I had the self same problem on a wireless keyboard and mouse for an iMac as well I installed for a friend, it took ages and ages for the computer to discover the two apple devices.
Am I just unlucky or is there voodoo involved? Luckily I am a seasoned apple user so got there in the end, but if I were a switcher and the very first experience of my new mac was it could not find its own mouse, I would not be impressed.

I've been using the Apple wireless mouse and keyboard with my Mac mini for about a year.
I've noticed that whenever the batteries for the two devices are running very low, they may not be recognize by the mini. Other than that, they are fine.

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/

Did intel core 2 duo imacs come with wireless mouse and keyboard

did intel core 2 duo imacs come with wireless mouse and keyboard

raffdog! wrote:
i would also like to know if it came with a remote
Same answer the earlier ones did the later ones did not.

How can I add the date at the top of the screen along with the day and time display?

Hello,
How can I add the date at the top of the screen along with the day and time display?
Thanks so much!

Open System Preferences>Date & Time:
Ciao.

Mac mini setup with wireless mouse and keyboard

Bought a new mini with wireless keyboard and mouse. Turns on, picks up the mouse and as soon as the registration setup window starts the connection is lost. It never picked up the keyboard. Apple support said it is not possible to set up a new mini with the wireless accessories so go buy wired ones. Is this really true? Is there a way to skip the registration window, install the wireless keyboard and mouse? Has anyone else had this problem?
If what the phone support guy said is true then I am a very unhappy new Mac purchaser. Nowhere on the Mac mini site or even in the instruction booklet does it say that you have to have the wired accessories and now apparently I'll have to buy two of everything. Total garbage.

Can you beg/borrow or steal any ("Windows") USB keyboard and mouse? They should get you going. You'll only need them for a few minutes when starting up, once.
"Garbage" doesn't endear yourself when asking for help on an Apple board though!

MBP Retina and Thunderbolt Display color correction

What are my options regarding color correction for a new 13" Retina MBP and Thunderbolt display using Spyder color calibration system, or equivalent? Really important I nail that down before purchasing.
Thanks!
Tom

Disable GPU drawing in Photoshop's preferences, and let Apple know about their video driver problems.

I have a Thunderbolt iMac 27" with a Thunderbolt Display attached. I would like to use the iMac and Thunderbolt display in Target Display Mode for my new Thunderbolt MacBook Pro. So far, it seems I can only use the iMac screen itself. How do I do this?

When I press the Command + F2, the iMac screen becomes a secondary for the MacBook Pro, and the Thunderbolt Display becomes the primary screen for the iMac. I was hoping that both screens would become secondaries for the MacBook Pro. Does anyone know how I should proceed? I have tried to connect the Thunderbolt display directly to the MacBook Pro, and the iMac to the Thunderbolt Display via the separate Thunderbolt cable, but there was no difference. And since the MacBook Pro only has the one Thunderbolt port, I'm not sure how to proceed.

Yes, eww, the language definitely states two thunderbolt displays, but I can understand the confusion and was siding with how they could make the mistake to think it would work like they want it to. My appologies for not being clear on that point, but I think you make it clear that the language in the ad says nothing about an imac.
Having said that all the language about TB would suggest that this would be possible. http://www.apple.com/thunderbolt/
High performance on display.
Thunderbolt I/O technology provides native support for the Apple Thunderbolt Display and Mini DisplayPort displays. It also supports DisplayPort, DVI, HDMI, and VGA displays through the use of existing adapters. So you can connect your Apple LED Cinema Display or other display, along with multiple high-speed devices, all from a single port.

What's the deal with DVI and Thunderbolt displays?

I have up and until now only ever had a MacBook, I planned on getting an iMac desktop but that didn't work out. However, now I am set on getting a Mini, but I remember there was a lot of comotion with the display connector and was hoping someone could guide me on that. I am looking to get a second hand late 2012 Mini, 2.3GHz and 16GB RAM.
I know there are Thunderbolt displays and DVI ones and converters and all that but what is the issue? Which one should I get?
Thanks in advance, it was one problem I thought I wouldn't have to worry about.

All I can say is that I have a TB display with my Mac Mini (late 2012) and it works great. The Mini has a TB port so works with the display perfectly. If you do not want a display that has speakers, camera, mic and ports on the back then you could get a less expensive non Apple monitor but I see some users have display issues depending on the specific monitor being used.. I will others comment on that.

How can I run Macbook Pro screen and Thunderbolt display at same time with different programs?

I am running a Macbook Pro with Mavericks and using an Apple Thunderbolt display. I would like to run 2 different programs on the 2 screens at the same time. Is this possible?

Select Help from the Finder's Help menu and search for "mission control."
Mac Basics- Mission Control

Can I use a thunderbolt DAS with 3 projectors and 1 display?

Hi, I want to know if is possible to use a Thunderbolt DAS (Promise Pegasus), with 3 HDMI projectors and 1 HDMI display (with active adapters), and have good performance with the DAS.
Thank you

In the Mac Pro late 2013, there are three ThunderBolt busses, each of which has two connectors. There is plenty of bandwidth to do the I/O you are talking about. As long as resolutions are 1080p or less, that fits nicely in HALF of a ThunderBolt-2 Bus, and another device can use the other half.
The Pegaus is limited by the speed of the drives and how many are actually active at once. Typical rotating drives can source data off the platters in the neighborhood of 125MBytes/sec, or about 1,000M bits/sec. Half a ThunderBolt-2 is ten times that.
You have specified too many HDMI displays, (which are considered "legacy" displays) for easy, cheap hookup. You will need mostly ACTIVE adapters, such as StarTech ACTIVE Mini DisplayPort to HDMI, about US$40 each.
Mac Pro (Late 2013): Using multiple displays

MacBook Pro Retina and Thunderbolt display

Hi all,
I noticed a for me new strange behavior when running my new TBD on my new MBPR. Running Mountain Lion.
When the lid is closed, that is when the MBPR's screen is closed and I use the TBD as an external display it only works when I use the TBD's power supply or the Mag Safe dito, do i disconnect the power from the MBPR the screen geas black... ok , that is as described in the manual. But....
..in the same scernario with no external power to the MBPR... if I open the MBPR, that is pull up the MBPR's screen they both spring to life anf can be used again???
What's the logic about this?
Please tell me the relevance why this is possible?
Regards
/Cekari

Welcome to Apple Support Communities
Open System Information (in /Applications/Utilities) without the Thunderbolt Display plugged in, and choose Thunderbolt in the sidebar. What does System Information say? Then, try with the Thunderbolt Display plugged in, and tell me the results.
Also, reset the SMC > http://support.apple.com/kb/HT3964 And do a PRAM reset > http://support.apple.com/kb/HT1379

Wacom Intuos 5 with Wireless Accessory and Thunderbolt Display

Similar Messages

Maybe you are looking for