Wacom Intuos Tablet and Pen not working on new iMac with OSX 10.9.4
Hi there, I've been using an A3 Wacom Intuos tablet and pen for many years now on a 2006 iMac for my illustration work, but I cannot get them to appear or work on my new iMac with OSX 10.9.4. I think they are the original Wacom Intuos tablet and pen. Does anyone know if they are just out of date now and aren't supported on the new OSX 10.9.4? Any advice would be greatly appreciated as I need to work and it's frustrating!
Many thanks,
Steve
Barbara B.
I have done as you suggested; I uninstalled PSE 11 and set my wife's account up as admin and reinstalled from there. Still have the same problem with my wife's account, but when I went to mine it is working correctly. Any ideas on why that would be? I'm sure it should work on both accounts. I have 2 accounts on my Mac Mini running OS X 10.6 Snow Leopard and it works on both.
Thanks for your help; at least it's working on my account so that's a great improvement.
Similar Messages
-
Fast user switching animation not working on new iMac with 10.9.1
I have a late 2013 iMac with the GeForce GTX 780M, pre-installed with 10.9 and then immediately updated to 10.9.1 out of the box.
I imported my adminstrator account from an older iMac with Mountain Lion, using Migration Assistant. No problems experienced there whatsoever. I then separately imported a second user account from the same Mountain Lion install. Both accounts are functioning normally.
However, when I switch between these accounts, the fast user switching animation (rotating cube) does not occur - it just instantly switches screens, without even a fade in/out effect.
I made sure the display settings on each account are identical down to the last detail, even the same color sync profiles. I also created a fresh 'test' user account with default Mavericks settings, yet switching to that from either of the imported accounts does not have the animation either.
Any suggestions on how to trouble-shoot this? I have 'Googled' it, but all the refrences are from earlier version of OS X from 2003-2009 and mention things like not having enough graphical processing power - obviously not an issue here.I tried (on both user accounts):
1. Flushing all the caches using Onyx
2. Deleting the 'com.apple.desktop.plist' files.
3. Switching each user account to non-standard resolutions and back again.
The lack of the rotating cube effect is not the worst of it, as about 50% of the time I switch accounts I get an 'empty' desktop in the account I have just switched to, and I can only get the desktop icons to appear again by switching back and forth a few times. Extremely frustrating.
I am starting to think this is yet another bug in Mavericks or a problem with the graphic drivers for the new GTX 775 / 780 cards. -
Jam Pack: Symphony Orchestra not working on new iMac with Maverick
Hi,
i received my new iMac 27 inch Haswell with Maverick installed.
I migrated most of the stuff i need but it seems the Symphony Orchestra Jam Pack instruments weren't migrated to Garageband.
Now i read somehwere that this JamPack doesn't work on Maverick.
Is there a way to download the Jam Pack again? I can't find them anywhere. Why doesn't Apple sell these in the store?
I can't try to install the JamPack again since i don't have a CD Rom drive in my iMac...
How can i restore these instruments on my Garageband?? I need them.
ThanxMainStage is for setting up a live performance and performing music. It has many instruments and effects. GarageBand is for mixing song arrangements and creating finished songs.
I have never really used MainStage, just for playing my guitar. I bought it to get current installers for the JamPacks.
After you install MainStage, you need to open and run it at least once, to download the full set of instruments and loops.
This will bring up this panel: -
I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
Please help!!!!You dont have any data on your phone yet right?
If you dont connect your device to the computer and
Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
after that try again -
I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.
Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print -
I am using a new imac with osx lion 10.7.5 and have just bought Apple iLife 11 on dvd so that I can install iWeb and iDVD, as macs no longer ship with these apps. When I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate.
Next problem is that when moving through the installer and get to custom install, as I only want to install iDVD and iWeb, I am presented with the option to install iDVD, Sounds & Jingles and iWeb, but not sure what is going on with the other 3 options iLife Support etc, they seem to be greyed out but still look like they may install over the top of the newer versions already on my imac. Is it ok for me to just go ahead and hit install? Or do I have a problem?Yep, just install iDVD (plus sounds and jingles) and iWeb if you want it (but note that iWeb apparently won't work if you upgrade to Mountain Lion).
Then use Software Update to get any late iDVD updates. -
Microsoft WORD & Excel not working on new iMac
I had the MS suite of WORD, Excel and PowerPoint installed on my new iMac OS 10.8.3 by a legitimate programmer w/a totally legal license. Neither WORD nor Excel will load up. I get a variety of error messages (i.e. invalid file name, cannot open global template). Power Point works fine.!!!!
I've tried uninstalling and re-installing with no luck.
Any thoughts?Unless you used this method to uninstall you may not have correctly uninstalled Office. Do it again using the manufacturers method, Then reinstall.
-
Function keys don't work on New IMac with Leopard.. very sad
We just got a New IMac with Leopard at work and my F Keys don't work at all. I have tried everything, even checking the "Use all F1, F2, etc. keys as standard function keys", but it doesn't work at all. I use these keys all the time. How can I fix this?
WebWolf wrote:
My Bad, I am sure I am not the only one that has done this. I had not assigned the F Keys to their function under Exposé, I thought they didn't work after I turned on the F Keys under the Keyboard & Mouse window. So, I thought I would post this to help anyone else that did this.
They now work, yea!!!!
Sometimes we solve our own problems quite well
I believe that Leopard does reset to the default F keys. -
Migration Assistant using firewire not working between new iMac and G5. Ah!
I unpacked my new iMac 21.5' last nite and spent three painful hours trying to use Migration Assistant to tranfer files from my old iMac G5, which is using OS X 10.4.11.
I follow all of the instructions ver batim: connect the 400/800 firewire between the old and the new iMacs, start migration assistant on the new iMac, reboot the old iMac holding down the 'T' key until the firewire symbol pops up on the screen. At that point, the new iMac sits there with the message 'waiting for the other iMac to restart.' It never seems to recognize the old iMac. I tried rebooting, reconnecting the cable, etc. No luck.
I also tried using the ethernet option with no luck. The computers find each other but after entering the 'code' twice, the old mac gets stuck 'searching for other computers on the network.'
Any advice? I'd really like to use my new iMac!!!!May not help but give this a try on the G5:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
I would also first turn off both computers then connect the FW cable. If both computers have a FW800 port then you can use a standard FW800 cable. Boot the G5 into TDM. After the TDM screen appears boot the new computer normally. -
Bluetooth not working on new iMac
On a new iMac, the Bluetooth functionality is not working. The icon shows: "Bluetooth: not available". I have already done a PRAM and a SCM reset with no success. Any ideas?
Hello:
If youn have already done the PRAM and SMC reset, call Applecare with a warranty issue.
Barry -
Ethernet DHCP not working on new iMac
I have a new 24" iMac and cannot get it to work over Ethernet with DHCP and NAT provided by an Airport Extreme (b/g model). The Aiport router is used to connect to Verizon DSL through a Verizon-supplied Westell ADSL modem. The Airport is configured for PPPoE and automatically provides DHCP and NAT in that configuration. I have a Netgear 5 port switch connected to the Ethernet port on the Airport router and a Xerox printer and the new iMac connected to the switch so that all computers on the network can share the printer.
I have several other computers (Macs and a PC) that all work fine with WiFi through the Airport router. The new iMac also works pretty well with its supplied Airport card, although the connection is sometimes lost when the Mac goes to sleep. The iMac is close to the router, which is why I would prefer to use Ethernet and take advantage of higher speed and a more reliable connection for printing large files.
I have tried everything I can think of to get Ethernet to work, including creating different Network configs, one just-Ethernet, one just-Wifi. Typically when I enable Ethernet, the iMac does not get an IP address from DHCP but assigns itself one. Even if I try to manually set a valid IP for my network, I cannot ping any other device including the Airport router.
I have tested the cable/switch/router combination by plugging a PowerBook in place of the iMac, and Ethernet works flawlessly for the laptop. I used to have an older Linksys router and had the Airport configured as a bridge, and that didn't work either, which led me to buy the Netgear switch and configure the Airport as my primary router. I was thinking perhaps there was a hardware issue with the newer Gig Ethernet controller on the iMac and the very old Linksys router/switch. But no dice.
So my only conclusion is that either the Ethernet controller on the Mac is kaput or that there is some config magic that I don't understand.
Any ideas?
Thanks,
RobSorry, I've been offline for the holidays. I tried what you suggested, configed the Powerbook and iMac for manual IP (192.168.1.220 and .230 with subnet 255.255.255.0) and connected them directly and could not ping from either machine. Here is the output requested:
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21b:63ff:fea2:feb%en0 prefixlen 64 scopeid 0x4
inet 192.168.1.220 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:1b:63:a2:0f:eb
media: autoselect (100baseTX <full-duplex,flow-control>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
Rob -
IChat video chat not working between two iMacs running OSX Leopard 10.5.1
My mother in law just got a 20" iMac (metal) and is connected to her wireless router.
I tried doing a video iChat with her, and it is not working. I am able to successfully test iChat with the three apple iChat test AIM buddy accounts.Screen names of Test accounts are here http://www.ralphjohns.co.uk/ContactTesters.html
9:40 PM Wednesday; February 20, 2008 -
Rosetta not working on new iMac?
I have a brand-new 20" 2.4gHz iMac (aluminum). I used Migration Assistant to get my documents and settings over but I'm doing clean installs of programs and doing Universal binaries whenever possible. So now I'm at Quicken...and my Quicken 2005 would not boot up on the new iMac. OK, I thought, maybe I need to upgrade to Quicken 2007. I did that. Now the installer for that will not run either, nor will Quicken 2007 out of the disk image the installer's also on. I think these are the first two PowerPC apps I've tried to run on this so far.
I read that there's been some trouble with Rosetta apps after the install of Quicktime 7.2 so I followed the instructions in the support doc for that. But it will not let me run the Combo 10.4.10 Intel update on my machine either (says it cannot be run). The line to input into Terminal as described in that doc gives me an error.
I can't go without Quicken -- I need to have it running on my new machine. Any suggestions? :'( I'm dyin' here.Well, yes, I know that Quicken is not a Universal binary (that is unfortunate). But by all accounts and articles the application should run under Rosetta, yes? (Even says so in that Macworld article.)
That's the actual problem I'm having -- The installer will not run. Nor will the program itself. I don't have any other PowerPC apps on the machine to try them out and check if others are working but I'd assume they're not. -
My Apple Help Centre menu is not working on new iMac
I have a new 2012 imac 27" and the Help Centre look up menu is not working in my main (admin) account. It is working in my second standard account that I have set up solely for testing the system when things are not working.
If I click on some of the items in the menu I get a message saying "The selected topic is currently unavailable. The topic you were trying to view could not be found." However, some of the help items do show up!
My internet is working fine so it is not because I don't have a connection. As it is working in the other account it seems that there must be some file path anomally with my main account.
Does anybody know of a fix before I give Apple a call?
thanksYou may be able to solve the problem by deleting the Help cache.
Back up all data.
Triple-click the line below to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with certain ISP's, such as the Exede satellite network. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
Microphone Not Working on New Imac
I just bought a $2000 27 Inch Imac and a few weeks later the microphone quit working and Apple is ignoring the problem and will not stand behind this new imac, anyone else having the same problem. I talked to a repair guy who said you can expect problems from an Imac because all of its parts are cheap made in china, he has encountered a lot of issues with the new Imacs. I wouldnt recommend anyone to buy one at this time, stick with a PC because in my opinion if you buy an imac, your buying trouble.
MansionStaffing wrote:
I just bought a $2000 27 Inch Imac and a few weeks later the microphone quit working and Apple is ignoring the problem and will not stand behind this new imac, anyone else having the same problem.
For proper Apple Service & Support, see > Apple - Support - iMac - Service FAQ
MansionStaffing wrote:
I talked to a repair guy who said you can expect problems from an Imac because all of its parts are cheap made in china, he has encountered a lot of issues with the new Imacs.
What repair guy did you talk to? Because that doesn't sound like a response from a qualified Apple Service Technician. Plus if it was, then there are ways to deal with them as well as your Hardware.
MansionStaffing wrote:
I wouldnt recommend anyone to buy one at this time, stick with a PC because in my opinion if you buy an imac, your buying trouble.
Ranting and ragging here in these Forums will get you no where, except for either edited or maybe even banned.
Maybe you are looking for
-
Video Pixelation Issue - New HP Pavilion 15-P008TX Notebook - Windows 8.1
Ahoy, I've seen topics regarding this issue - i.e. first day running a new HP Pavilion 15-P008TX, using Windows 8.1... However the video quality on videos being played from the DVD Drive, HDD, and streamed videos (e.g YouTube) are extremely low quali
-
I found these instructions but they are quite cryptic: https://wiki.archlinux.org/index.php/Ma - sion_2.2C1 Could anyone help break this down into a step-by-step for me? The machine currently has OS X 10.4 on it which I'm happy to jettison or keep si
-
Strange "code" in the Comments field when playing songs
When I play some songs (probably 80% of my archive) iTunes generate some strange code in the Comments field. This is quite annoying, since I use the field to write additional info about the song, artist, location, whatever. Examples of such codes: "
-
My iPod cannot turn on, however it can when it is on my iPod dock. It won't even sync into my computer. Once I take it off of my dock it automatically turns black and I can't turn t on. How can I get it back to normal?
-
I am using the 1010 series light weight access points. Also I am using cisco ACS 3.3. The problem I am having is that when I authenticate through the Cisco Aironet Desktop Utility. I see this when i click advanced. Server Based Authentiction: EAP-FAS