Wacom Intuos3 + PM dual 2.5 won't sleep

Ever since I installed my Intuos3 A4 tablet from
Wacom, my Powermac G5 (dual 2.5, 10.4.3) has refused
to sleep. It simply wakes up as soon as the screen
goes black and the fans click off. Unplugging the
tablet solves the issue, but obviously I sort of want
to keep it plugged in all the time.
Anybody else with this problem, and possibly a
solution? Using the latest Wacom drivers.
Read this thread and look at your system.log. It's a USB related issue.
http://discussions.apple.com/thread.jspa?threadID=121373&tstart=0
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
 An Apple User Group 
New: MacOSG Podcast

Similar Messages

Dual 867 MDD won't sleep after memory upgrade

Since yesterday my PowerMac G4 Dual 867 MDD has become insomniac. What changed since yesterday is that I installed an additional 512MB of RAM. So far as memory is concerned, there's the factory-installed 512 Infineon module; a second 512MB Kingston module (installed about a couple of years ago, and has been working fine ever since); and a third 512MB Kingston module (the one I installed yesterday) for a total of 1.5GB.
I am aware that sleeping issues can arise for all sorts of reasons (inc. USB peripherals) but it is pretty obvious that in my case the problem is caused by the memory upgrade.
The symptoms: Once I click Sleep on the Apple menu, I can hear the sound of the hard disks spinning down, but the rest of the box remains fully powered. The screen freezes and the computer has to be manually switched off, as the mouse cursor disappears from the screen and the keyboard becomes completely unresponsive.
So far I have tried the following: I have reset the PRAM (no luck there), and have tried switching memory modules to different sockets (basically, the single remaining free slot). I apologise in advance if that second troubleshooting routine might portray me as an ignoramus; I have a good understanding of things but cannot claim to be an expert.
I am a extremely frequent user of the sleep mode, and this issue has taken away from me all the pleasure that comes with a coveted (and long overdue) memory upgrade. I would deeply appreciate any help in resolving this.
Many thanks

Dear Dave,
Many thanks for your prompt response. I ran Rember (Amount of memory to test: "All". All other boxes unchecked - I was running other apps at the time). I cannot understand the results from the log, but I didn't get any feedback at the end of the testing. I attach the contents of the log below:
Memtest version 4.13 (32-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004, 2005 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
MacOS X (Darwin) running in multiuser mode
POSIX version 200112
Pagesize is 4096
Requested memory: 18MB (19693568 bytes)
Available memory: 18MB (19693568 bytes)
Allocated memory: 18MB (19693568 bytes) at local address 0x02008000
Attempting memory lock... locked successfully
Creating test buffers...
Buffer A: 9MB (9846784 bytes) at local address 0x02008000
Buffer B: 9MB (9846784 bytes) at local address 0x0296c000
Running 1 test sequence...
Test sequence 1 of 1:
Stuck Address : ok
Random Value : \ ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : setting 1 of 64ok
Block Sequential : setting 1 of 256testing 224 of 256setting 225 of 256testing 225 of 256setting 226 of 256testing 226 of 256setting 227 of 256testing 227 of 256setting 228 of 256testing 228 of 256setting 229 of 256testing 229 of 256setting 230 of 256testing 230 of 256setting 231 of 256g 238 of 256setting 239 of 256testing 239 of 256setting 240 of 256testing 240 of 256setting 241 of 256testing 241 of 256setting 242 of 256testing 242 of 256setting 243 of 256testing 243 of 256setting 244 of 256testing 244 of 256setting 245 of 256testing 245 of 256setting 246 of 256testing 246 of 256setting 247 of 256testing 247 of 256setting 248 of 256testing 248 of 256setting 249 of 256testing 249 of 256setting 250 of 256ok
Checkerboard : setting 1 of 64ok
Bit Spread : ok
Bit Flip : setting 1 of 256ok
Walking Ones : setting 1 of 64ok
Walking Zeroes : setting 1 of 64All tests passed.
Thanks again,
Alex

Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows

I've got a Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows. I've tried all of the following initial tests as suggested on forums:
-Ram swaps
-Alternating video card in PCIe slots
-Trying alternate video card
-resetting pram and smc
-Multiple tests with memtest86+ over 26hrs and no failed ram
-Multiple tests (8-12 cycles) with apple HW diagnostics and no problems
-Firmware is approved firmware for early 2008 model...no new updates.
Gentoo livecd works fine and I even installed to hard drive and it boots fine with it. In addition to above tests I also ran a linux stress test putting all 8 cores at a load of 22 for 2.5hrs with no problems.
Memtest86+ for 24hrs+ yields no problems.
Where problems occur:
Booting off hard drive, DVD or firewire yields an immediate curtain of death and booting off a new snow leopard DVD dies about 25% into the install.
Looking at error log and a quick dmesg shows "Package 0 didn't get an HPET" and complains about AppleIntelCPUPowerManagement.kext. Google turns up illegal uses of this, so doesn't apply to my use case.
I'm a bit stumped since all was working well until one day it was non-stop curtains of death and can't get them to go away.
A logic board replacement at $1100 is not a feasible option for something that works on linux and windows, but not OS/X, is a bit disappointing and somewhat surprising.
Thanks for your help and advice.
Regards,
Marcos

Someone here once thought they knew EFI and Open Firmware a little, and used some commands from OF library that an Intel EFI Apple system didn't like. New logicboard.
Of course to run or boot OS X and see video you need EFI based card. The presence of some PC cards can block OS X from booting.
The fact you get part way through SL DVD, pull all the drives, put in a new drive and format it from SL DVD.
Most of the things you tried are what are more common with PC hardware. Including where people have tried and failed to install OS X on unsupported hardware.
I suppose it is possible something tried and failed to modify the Mac's firmware.
If you have Windows running, and you have WD drives, WD just posted new Lifeguard utility which is what I use to do a good job of stripping a drive down and recertify it for reuse, works wonders. Maybe same for other makes with vendor utility.

Issue with Wacom Intuos3 in Photoshop CS5

New PC windows 7 home premium,/64 bit...old one was XP/CS2.
Using a Wacom Intuos3. With my old PC/PS, when I tapped the R touch strip, the window in PS would zoom in 'even' increments - 25, 33, 50, etc. New PC/CS5 increments are odd #s. I worked w/Wacom help,but they had no fix.
Said it was an Adobe issue. Can anyone help with this?

Turn off smooth zooming in the Photoshop prefs!
Mylenium

HT1772 I have an iBook with Dual USB that won't fully turn on. it flashes a "?" and the Mac face symbol in a folder i the middle of the screen. How can I trouble shoot?

I have an iBook with Dual USB that won't fully turn on. it flashes a "?" and the Mac face symbol in a folder i the middle of the screen. How can I trouble shoot?

Restart with the Option key held down and see if the internal drive appears.
If it does, click on it, press Enter, and then change the setting in the Startup Disk pane of System Preferences or the Startup Disk control panel.
If it doesn't, insert a Mac OS install CD or DVD and use the Disk Utility or Disk First Aid to repair the internal drive. If there aren't any problems, install an OS onto it.
(86157)

MDD G4 (Dual 1.0ghz) Won't go to sleep...

Hey all,
I've got a weird problem where all of a sudden, my G4 MDD won't go to sleep! it's been working fine, and I haven't changed or installed anything in the last few weeks. Selecting sleep from the apple menu doens't do anything.
I thought it might be a pram problem, since my clock was always getting messed up lately, when I rebooted, it would always say it was out of synch and at a really old date. This problem is now fixed, but I still can't put the computer to sleep.
Could this be a battery problem? Is there any way to check?
I'm running 10.4.8.
Any thoughts would be appreciated.
Thanks!

This is for a Mac that won't sleep.
First, read things in Apple doc.#25801 on sleep settings.
USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit.
If you've set your Mac to recieve faxes, it may not be able to sleep. It might also have a damaged preferences file.
If you use your Mac for faxing, open System Preferences. click Print & Fax, click the Faxing tab, and uncheck the Recieve Faxes On This Computer box.
If that does'nt work or you've never faxed on your Mac, go to Finder/Hard Drive /Library/Preferences/SystemConfiguration and delete the com.apple.PowerManagement.plist and com..apple.AutoWake.plist files (if your Mac asks, type your admin. password).
If the latter file isn't present in the folder, go to user name(probably your name)/Library/Preferences, delete the com.apple.systemuiserver.plist file, and reboot your Mac.
Hope this helps!
P.S. One member here reported this (Michael Gleason);
"I have had this problem with my IMac G5. It is surprisingly irritating. LaCie's Silverkeeper backup software was the cause. By default it gave itself permission to wake up the computer to check if a backup was needed. Do you have this or a similar program installed which has scheduled activities including wake-up permissions as an option?"
Dave Hamilton provided this link, xlr8yourmac.com, to a member, which addresses failure of deep sleep with some users that updated and added new FireWire and USB cards.
tomhorvat adds this; After few days of messing around I found out that I had desktop background (wallpaper) set to change every 1 minute.
After unchecking "Change picture..." in system preferences (under Desktop/Screen saver), my powerbook went to sleep all by itself.
Cheers!
DALE

MBP 17" 2.8 dual core won't sleep-gets hot

my new unibody wont go to sleep these days, I close the lid and come back to find it really hot. sitting on my desk or carried in my bag, I'm scared it will do permanent damage.
doing a little search, it seems a few people are having this problem.
Apple, can you please fix this pronto!?

Meaning MacMall doesn't accept returns on Apple products. If it has a problem, like mine, you have to go to Apple to get it fixed. You can't send it back for a new one.
Update- I just erased and installed and the problems are still there. It won't sleep manually, (will by itself but then screen won't wake) it won't shutdown and it hangs at restart. Hard reboot is my only option right now because no one here seems to have a solution so I guess I'm calling Apple.

G4 Quicksilver - Won't Sleep

Ever since I connected a CRT monitor to the 2nd port on the graphics card, my G4 HD won't go to sleep. The monitor will play the screen saver for a bit then go to black as programmed, but the computer, fan and all, keeps running full-on. The monitor plugged into the AGP port at the time was a 15" Studio Display. Now both monitors are gone and I'm using the AGP port with a DVI adapter for a 20" Cinema Display and the problem is continuing.
On a seperate note, this may or may not be related, upon occassion the machine won't wake up unless I do a hard reboot. Could this all be problems with the PRAM? I just read on another thread to try resetting it, but if anyone has any other ideas, I'd love to hear them!
Thanks!
G4 Quicksilver Dual 800 Mac OS X (10.3.6) 20" Cinema Display, FW PCI card, 250 GB 2nd HD, Wacom Intuos3 Tablet

A number of sleep-related issues can appear after incremental Mac OSX updates, including the inability to properly go to sleep, problems waking from sleep, and having your display go to sleep without your Mac going to sleep. The most common culprit is Bluetooth. Try these tips to fix your sleep problems.
WAKE UP
In System Preferences>Bluetooth, uncheck Allow Bluetooth Devices To Wake This Computer. If you are using a Bluetooth mouse and keyboard, you'll have to wake your Mac by pressing the power button.
FILE CORRUPTION
Your Bluetooth preference file may be corrupt-you'll need to delete it. Turn Bluetooth off, then go to the /Users/user name/Library/Preferences folder. Look for a file called com.apple.Bluetooth.plist and trash it.The OS will create a new preference file when you enable Bluetooth again.
ENERGY SAVER
If you have issues with a Mac or display that goes to sleep at inappropriate times, you may have a problem with Energy Saver. Delete the following .plist files and restart:
-/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
-/Users/username/Library/Preferences/com.apple.systemuiserver.plist--(username is your name or System Administrators name).
-/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
A restart is very important after deleting these plists. After a reboot your Mac will then generate new ones.
In some cases, running MacOS X's cron tasks-maintenance that the OS performs automatically if you leave your Mac on 24 hours a day-can resolve many sleep problems. If you don't want to leave your Mac on, you can use MacJanitor, Yasu, or OnyX free at Versiontracker.com.
Some, in these forums, have had luck fixing sleep issues downloading the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
Cheers!
DALE

Mac won't sleep after adding Kensington Wireless Mouse

I've added a Kensington PilotMouse Laser Wireless to my system and now it won't sleep, without first switching off the mouse. Kensington has no info on this, is there a workaround?
PowerMac G4 (Dual 867) Mac OS X (10.4.4)

The "sleep" that you describe is not sleep. Your mac has crashed but since it thinks it is sleeping there is nothing in the crash logs.
Sleep on modern computers is not just a hardware shutdown. Because X and XP are server based kernels they are designed to run 24/7 and do what they can to keep it that way. Deep sleep requires an orderly shut down of processes and loading their status into memory so that when it wakes, all is as it was.
There are many things that can prevent sleep. Usb devices are designed to wake a mac on a change of state (doing something). When my mac did what yours did the only fix for it was an erase and install. I tried all the other solutions but the only one that worked was an erase and install.
If you care to try some of the "fixes" then here are some.
Reset the pmu.
http://docs.info.apple.com/article.html?artnum=95037
• Trash all caches (system and user)
• Mac OS X power management is sensitive to malfunctions in USB devices.
Remove USB peripherals, one at a time
• Mac will not sleep if Applications/processes continuously writing to the Console logs.
Launch Console in Applications/Utilities and check both the console.log and system.log logs for blocks of recurring messages written therein that repeat at high frequency.
Note: the console.log file should open by default when you launch Console.
• Quit System Preferences.... Navigate to ....
/Library/Preferences and delete.....com.apple.AutoWake.plist
Enter your Admin password, when prompted.
•If this does not solve the problem, your Energy Saver preferences may be corrupt.
Navigate to /Library/Preferences/SystemConfiguration (folder) and delete.
com.apple.PowerManagement.plist
com.apple.AutoWake.plist
Enter your Admin password, when prompted.
• and finally....
Navigate to ~/Library/Preferences/ and delete......
com.apple.systemuiserver.plist

FW800 won't sleep -- shuts down instead...

So there are many here who are having sleep/power control related problems, however I'm having a slightly different problem. As the subject line states, my FW800 Dual G4 won't sleep. Rather, when I select sleep it simply shuts down.
I have replaced the battery, reset the PRAM, reset the PMU, and reset the NVRAM, without success.
I suspect, however, maybe it's related to software as I can load up new system software and everything works fine. By the time I update everything to the latest software, including iLife, it no longer sleeps.
Short of taking the machine in, does anyone have any further ideas?

I have this;
If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following line:
reset-nvram
press the return key on your keyboard
set-defaults
press return
reset-all
press return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still didn't work? Might be time to call AppleCare or see an Apple Genius or a technician
Cheers! DALE

Mountain Lion won't sleep, shut down, restart, or log out.

Hi All,
After Mountain Lion my 2010 iMac 27" won't sleep, shut down, restart, or log out.
Basically most functionalities of clicking the apple icon are disabled - "About this Mac" doesn't work either.
Please help!
Before Apple fixes this, is there another way of putting my Mac to sleep or shut down?

Just adding another voice to the chorus. Since upgrading to Mountain Lion my computer will not sleep. The cursor freezes when I try to invoke sleep but the computer and monitor remain on. The cursor unfreezes when I tap the spacebar the way I would normally do to wake from sleep. Fortunately, shutdown, restart and logout function normally, so I guess I should count my blessings. This isn't my only problem with Mountain Lion, but I didn't want to muddy the waters on this thread with other issues.
Dual quad-core MacPro3,1

PowerPC won't sleep

For the last couple of months, my PowerMac won't go into sleep mode after the set amount of time has passed. I can sleep it manually, but if I walk away it will run all day, although the screen will turn off as programmed.
This is a G5 dual 2 ghz machine fro around 2005, running OS X 10.5.8. I've noticed that my wife's similar vintage iMac won't sleep automatically anymore, either, leading me to believe that this might be an OS issue.
Thanks for any suggestions,
Ian

Hi Ian, this has cured it 2 or 3 times, at least a good start.
I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

MBP 2 won't sleep manually, w/closed lid and hangs on shutdown/restart

So basically, when I'm done using it I have to hard shutdown.
I have-
zapped PRAM
reset SMC
trashed those pref files
fixed/check permissions & the disk
This thing in like 2 weeks old less than 10 hours of use for peep's sake! I bought this MBP2 to be my backup so I can take my G5 dual core in to get fixed so now that will have to wait.

Meaning MacMall doesn't accept returns on Apple products. If it has a problem, like mine, you have to go to Apple to get it fixed. You can't send it back for a new one.
Update- I just erased and installed and the problems are still there. It won't sleep manually, (will by itself but then screen won't wake) it won't shutdown and it hangs at restart. Hard reboot is my only option right now because no one here seems to have a solution so I guess I'm calling Apple.

MBP won't sleep automatically.

My Macbook Pro won't go to sleep and it's driving me crazy.
I have been watching my processes closely and haven't seen anything that would keep it awake. The screen goes off like usual but it won't actually go to sleep on its own.
I can make it sleep by closing the lid or pressing sleep under the apple logo.
I deleted com.bjango.istatlocal in my Library> launchagents folder
here are my computers processes
(com.bjango.istatlocal[193]) posix_spawn("/Library/Application Support/iStat local/iStatLocal", ...): No such file or directory
9/22/09 4:55:59 PM com.apple.launchd.peruser.501[80] (com.bjango.istatlocal[193]) Exited with exit code: 1
9/22/09 4:55:59 PM com.apple.launchd.peruser.501[80] (com.bjango.istatlocal) Throttling respawn: Will start in 10 seconds
9/22/09 4:56:09 PM com.apple.launchd.peruser.501[80] (com.bjango.istatlocal[194]) posix_spawn("/Library/Application Support/iStat local/iStatLocal", ...): No such file or directory
9/22/09 4:56:09 PM com.apple.launchd.peruser.501[80] (com.bjango.istatlocal[194]) Exited with exit code: 1
9/22/09 4:56:09 PM com.apple.launchd.peruser.501[80] (com.bjango.istatlocal) Throttling respawn: Will start in 10 seconds
9/22/09 4:56:19 PM com.apple.launchd.peruser.501[80] (com.bjango.istatlocal[198]) posix_spawn("/Library/Application Support/iStat local/iStatLocal", ...): No such file or directory
9/22/09 4:56:19 PM com.apple.launchd.peruser.501[80] (com.bjango.istatlocal[198]) Exited with exit code: 1
9/22/09 4:56:19 PM com.apple.launchd.peruser.501[80] (com.bjango.istatlocal) Throttling respawn: Will start in 10 seconds
9/22/09 4:56:23 PM com.apple.launchd.peruser.501[80] ([0x0-0x12012].com.apple.Console[124]) Exited: Killed
9/22/09 4:56:43 PM com.apple.launchd[1] * launchd[1] has started up. *
9/22/09 4:57:13 PM com.wacom.wacomtablet[72] TabletDriver[72]: Env RUNWITHLAUNCHD is set to 1
9/22/09 4:57:14 PM com.apple.WindowServer[54] Tue Sep 22 16:57:14 chad-muellers-macbook-pro.local WindowServer[54] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
9/22/09 4:57:28 PM com.wacom.wacomtablet[81] TabletDriver[81]: Env RUNWITHLAUNCHD is set to 1
9/22/09 4:57:28 PM com.apple.launchd.peruser.501[82] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
9/22/09 4:57:28 PM com.wacom.wacomtablet[81] TabletDriver[81]: RunApplication called while eStopping
9/22/09 4:57:28 PM com.apple.launchd[1] (com.wacom.wacomtablet[81]) Exited with exit code: 255
9/22/09 4:57:30 PM com.wacom.wacomtablet[107] TabletDriver[107]: Env RUNWITHLAUNCHD is set to 1
9/22/09 4:57:30 PM com.apple.launchd.peruser.501[82] (com.apple.Kerberos.renew.plist[104]) Exited with exit code: 1
9/22/09 4:57:31 PM com.apple.launchd.peruser.501[82] ([email protected][109]) Exited with exit code: 1
9/22/09 5:07:44 PM [0x0-0x1a01a].org.mozilla.firefox[165] Debugger() was called!
9/22/09 5:08:28 PM iChatAgent[160] [Warning] [AIM] Could not change my visibility to 0
9/22/09 5:08:31 PM iChatAgent[160] [Warning] AIMBuddyList::OnDownloadError: user=oxygensk8z, error=(code=3, subcode=0, category=7, url="", message="")
9/22/09 5:08:31 PM iChatAgent[160] [Warning] AIMBuddyList::OnDownloadError: user=unfknstpbl666, error=(code=3, subcode=0, category=7, url="", message="")
9/22/09 5:08:31 PM iChatAgent[160] [Warning] AIMBuddyList::OnDownloadError: user=drboboh, error=(code=3, subcode=0, category=7, url="", message="")
9/22/09 5:08:31 PM iChatAgent[160] [Warning] AIMBuddyList::OnDownloadError: user=m3alpine97, error=(code=3, subcode=0, category=7, url="", message="")
9/22/09 5:08:31 PM iChatAgent[160] [Warning] AIMBuddyList::OnDownloadError: user=shahab323is, error=(code=3, subcode=0, category=7, url="", message="")
9/22/09 5:08:31 PM iChatAgent[160] [Warning] AIMBuddyList::OnDownloadError: user=myiprelay, error=(code=3, subcode=0, category=7, url="", message="")
9/22/09 5:08:31 PM iChatAgent[160] [Warning] AIMBuddyList::OnDownloadError: user=santaclaus, error=(code=3, subcode=0, category=7, url="", message="")
9/22/09 5:08:31 PM iChatAgent[160] [Warning] AIMBuddyList::OnDownloadError: user=santaclaus, error=(code=3, subcode=0, category=7, url="", message="")
9/22/09 5:08:31 PM iChatAgent[160] [Warning] AIMBuddyList::OnDownloadError: user=woobiee101, error=(code=3, subcode=0, category=7, url="", message="")
9/22/09 5:18:18 PM [0x0-0x1a01a].org.mozilla.firefox[165] Debugger() was called!
9/22/09 5:20:49 PM com.apple.launchd[1] * launchd[1] has started up. *
9/22/09 5:21:18 PM com.wacom.wacomtablet[69] TabletDriver[69]: Env RUNWITHLAUNCHD is set to 1
9/22/09 5:21:18 PM com.apple.WindowServer[50] Tue Sep 22 17:21:18 chad-muellers-macbook-pro.local WindowServer[50] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
9/22/09 5:23:52 PM com.wacom.wacomtablet[93] TabletDriver[93]: Env RUNWITHLAUNCHD is set to 1
9/22/09 5:23:52 PM com.apple.launchd.peruser.501[95] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
9/22/09 5:23:52 PM com.wacom.wacomtablet[93] TabletDriver[93]: #### GetFrontProcess failed to get front process (-600)
9/22/09 5:23:52 PM com.wacom.wacomtablet[93] TabletDriver[93]: RunApplication called while eStopping
9/22/09 5:23:52 PM com.apple.launchd[1] (com.wacom.wacomtablet[93]) Exited with exit code: 255
9/22/09 5:23:58 PM com.wacom.wacomtablet[117] TabletDriver[117]: Env RUNWITHLAUNCHD is set to 1
9/22/09 5:23:59 PM com.apple.launchd.peruser.501[95] (com.apple.Kerberos.renew.plist[114]) Exited with exit code: 1
9/22/09 5:24:00 PM com.apple.launchd.peruser.501[95] ([email protected][119]) Exited with exit code: 1
9/22/09 5:26:59 PM [0x0-0x17017].backupd-helper[162] Not starting Time Machine backup after wake - failed to resolve alias to backup volume
PLEASE HELPP!!!!!
Message was edited by: Slvre39

This is for a Mac that won't sleep.
Here is Apple's KB article HT1776 with their tips.
Mine follow;
USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit.
If you've set your Mac to receive faxes, it may not be able to sleep. It might also have a damaged preferences file.
If you use your Mac for faxing, open System Preferences. click Print & Fax, click the Faxing tab, and uncheck the Receive Faxes On This Computer box.
If that doesn't work or you've never faxed on your Mac, go to Finder/Hard Drive /Library/Preferences/SystemConfiguration and delete the com.apple.PowerManagement.plist and com..apple.AutoWake.plist files (if your Mac asks, type your admin. password).
If the latter file isn't present in the folder, go to user name(probably your name)/Library/Preferences, delete the com.apple.systemuiserver.plist file, and reboot your Mac.
Hope this helps!
P.S. One member here reported this (Michael Gleason);
"I have had this problem with my IMac G5. It is surprisingly irritating. LaCie's Silverkeeper backup software was the cause. By default it gave itself permission to wake up the computer to check if a backup was needed. Do you have this or a similar program installed which has scheduled activities including wake-up permissions as an option?"
Dave Hamilton provided this link, xlr8yourmac.com, to a member, which addresses failure of deep sleep with some users that updated and added new FireWire and USB card.
Also, here is Apple KB article TA2469 about PCI cards and sleep.
tomhorvat adds this; After few days of messing around I found out that I had desktop background (wallpaper) set to change every 1 minute.
After unchecking "Change picture..." in system preferences (under Desktop/Screen saver), my powerbook went to sleep all by itself.
Tristan Currier noticed this; "I have a Canon printer(shared) and my imac would not sleep. I opened up printer/fax in system prefs and noticed it said the printer was in use when it was off. Opened up the printer queue and noticed about 7 pending documents. Deleted them all and now it sleeps.
Check the printer queue!"
Allan Jones says "sometimes there is Network activity: launch System Preferences > Energy Saver > "Options" tab and uncheck "Wake for Ethernet network administrator access."
Good Luck!  DALE

Macbook Pro won't sleep after updating to 10.4.11

Hi,
I just updated to 10.4.11 reluctantly from 10.4.9 as whenever I do update I always have issues...I basically just went to software update last week and updated to everything I could. I've just been reading the forums and noted that updating is not always that easy...
Well basically my computer won't sleep if the lid is left open, this is IMMENSELY annoying since I often leave my desk to work on drawings, and I don't want energy being wasted like it is at the minute. Call me picky but I just want my computer to work.
I've reseted the PRAM, (option, alt, p and r), closed all applications, etc, but no luck...
Its a 2.2ghz MacBook pro, 2GB. Thank you in advance
Neal

The important thing for the future imho, is to always Repair Permissions before & after any update... seems to ward off most of these problems. Of course that is only good if the disk is Verified once in awhile.
Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
http://docs.info.apple.com/article.html?artnum=302672
About Disk Utility's Repair Disk Permissions feature...
http://docs.info.apple.com/article.html?artnum=25751
In fact I'd start with those 2 now, if that doesn't help you may need to reapply some updates by getting them directly from apple>downloads.

Wacom Intuos3 + PM dual 2.5 won't sleep

Similar Messages

Maybe you are looking for