Wacom or Bluetooth Mouse issues with most recent Beta??

Wacom or Bluetooth Mouse issues with most recent Beta??
All I was wondering if anyone was having issues with Lightrooms beta and pointing devices… while I’m sure the Wacom Introus4 is dying in Lightroom I can’t verify that my Mouse is as well.
I’m using the most recent Beta of Lightroom and Wacom Tablet Driver 615-3a… I’m sure the issue dosent reside with another program because the tablet only stops working in Lightroom. Basically I loose all tablet functionality until I reboot whin I attempt to access the Film Strip… I’ve repeated a few times and with each it dies…

Unfortunately, although you are getting problems with your Wacom and Lr, the solution for the short term is to re-install an older driver for the tablet until Wacom come up with a new update to fix the prolem. This has been a long running problem for users when operating Lr with Wacom tablets.
(I offer this solution not from personal experience, but from what other tablet users have reported in previous threads, and there have been several).

Similar Messages

  • Is there any fix for the bluetooth connectivity issue after most recent OS update?

    Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?

    There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
    I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
    If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

  • Serious mouse issues with GTK

    my mouse and touchpad for my laptop have always worked without any sort of problem. i recently switched to openbox from gnome and it's been a wonderful experience so far. i tried cleaning out unnecessary gnome stuff and installed KDE to toy with it a little. needless to say shortly afterwards i ditched KDE and switched back to openbox, only to discover my mouse being screwed. i can move the cursor around and such but after a few seconds of running my ability to click and right-click is gone. i tried re-installing gnome completely hoping it might effect it and logged into a gnome session instead but the problem is persisting here as well. if i am using my mouse in a window, i cannot select anything on the panels with it whatsoever without repeatedly right clicking in the window close to the panel and then clicking the panel. and whenever i have the panel selected i can interact with it fine but cannot switch over to any windows. it's making me believe there's something going on with the mouse thinking it's "stuck" on the panel or window so clicking outside of it is rendered useless. i really don't know, i've tried searching online and such for any help on the topic but could not find anything and this is my final resort before going completely mad. any help would be greatly appreciated.
    EDIT: i've tried toying with settings in gnome in regards to the mouse and stuff, basically just doing anything i possibly can and while using a window from the control panel for the mouse and clicking within it i started opening a ton of control panel items (appearance, etc.) leading me to believe it's definitely an issue of the mouse being stuck in a window or something.
    Last edited by hustletrees (2010-07-01 04:11:28)

    Your mouse is handled by xorg, so you need to make sure it's configured correctly. "mouse issues with GTK" simply doesn't make any sense.
    My guess is that somewhere in the middle of changing WM/DE, you also did a system upgrade (a good thing) without reading Arch news (a bad thing), so you now have xorg 1.8 and you need to change your config accordingly.

  • Seelcting records with most recent date

    Hello Friends
    I am new to this group.
    I am having a set of records as follows in a table
    col1,col2, col3(dd/mm/yyyy)
    1 abc 1/1/2007
    1 def 2/1/2007
    2 ghi 1/1/2007
    2 --- 3/1/2007 (No value in col2)
    3 jkl 1/1/2007
    3 mno 4/1/2007
    I would like the output as follows:
    col1, col2,col3
    1 abc 2/1/2007
    2 3/1/2007
    3 mno 4/1/2007
    (ie with most recent update_dates)
    How to implement this in SQL?

    Double post.

  • Selcting records with most recent date

    Hello Friends
    I am new to this group.
    I am having a set of records as follows in a table
    col1,col2, col3(dd/mm/yyyy)
    1 abc 1/1/2007
    1 def 2/1/2007
    2 ghi 1/1/2007
    2 --- 3/1/2007 (No value in col2)
    3 jkl 1/1/2007
    3 mno 4/1/2007
    I would like the output as follows:
    col1, col2,col3
    1 abc 2/1/2007
    2 3/1/2007
    3 mno 4/1/2007
    (ie with most recent update_dates)
    How to implement this in SQL?

    or:
    SQL> create table t
      2  as
      3  select 1 col1, 'abc' col2, date '2007-01-01' col3 from dual union all
      4  select 1, 'def', date '2007-01-02' from dual union all
      5  select 2, 'ghi', date '2007-01-01' from dual union all
      6  select 2, null,  date '2007-01-03' from dual union all
      7  select 3, 'jkl', date '2007-01-01' from dual union all
      8  select 3, 'mno', date '2007-01-04' from dual
      9  /
    Tabel is aangemaakt.
    SQL> set autotrace on explain
    SQL> select col1, col2, col3
      2    from (select col1, col2, col3, row_number() over (partition by col1 order by col3 desc) rn
      3            from t)
      4   where rn = 1
      5  /
          COL1 COL COL3
             1 def 02-01-2007 00:00:00
             2     03-01-2007 00:00:00
             3 mno 04-01-2007 00:00:00
    3 rijen zijn geselecteerd.
    Uitvoeringspan
       0      SELECT STATEMENT Optimizer=CHOOSE
       1    0   VIEW
       2    1     WINDOW (SORT PUSHED RANK)
       3    2       TABLE ACCESS (FULL) OF 'T' (TABLE)
    SQL> select col1
      2       , max(col2) keep (dense_rank first order by col3 desc) col2
      3       , max(col3) col3
      4    from t
      5   group by col1
      6  /
          COL1 COL COL3
             1 def 02-01-2007 00:00:00
             2     03-01-2007 00:00:00
             3 mno 04-01-2007 00:00:00
    3 rijen zijn geselecteerd.
    Uitvoeringspan
       0      SELECT STATEMENT Optimizer=CHOOSE
       1    0   SORT (GROUP BY)
       2    1     TABLE ACCESS (FULL) OF 'T' (TABLE)Regards,
    Rob.

  • How to display record with most recent date in sapui5?

    Hi
    I have a local json data with me, in which I have number of records.
    And in each record I have an "AENDATE" as a date property.
    Now I want to display the record with most recent date in the records.
    How I can I do it......????????
    Please help me with this.
    Thanks
    Sathish

    How about sorting your json model descending, and display only first (index:0) item?

  • Bluetooth Mouse Issues

    Anybody having bluetooth connectivity issues after devices are paired? Periodically, my mouse stops working and I have to turn it off and back on for it to reconnect. Mouse doesn't do this when paired with my old Dell Inspiron 9300 laptop.-bp

    Hi All, I have been experiencing this random disconnect problem as well.  Sometimes it came good and then sometimes I had to remove and reinstall the same as everyone else.
     My problem is with a Logitech V470 mouse.  <o:p></o:p>
    Recently the symptoms changed and it became a permanent device instead of a bluetooth connected device. <o:p></o:p>
    Furthermore, it couldn't be removed at all.  The only way to remove it was to uninstall all of the Bluetooth module drivers.  When the system rebooted,
    it again loaded as a permanent device along with printers.  Please note I'm talking about it being fully connected but not functioning whether it was turned on or off (present or not present).  I wondered what had changed this time to make this significant
    change in behaviour.  Okay time to roll-back updates and go to a previous restore point/s.  Guess what, problem solved!  I had to go back two restore points to fix the problem.  What was it, it was a JAVASCRIPT auto update!<o:p></o:p>
    Once I past (rolled back) the most recent Javascript update the mouse returned to a bluetooth connected device and I could disconnect and reconnect.  Javascript
    changed the way this device was being recognised and connected.  
    JAVASCRIPT is underlying all of these problems of connection.  Roll it back and suddenly you'll have control again!  Hopefully Oracle will soon fix
    this, until then, I'm disabling updates of JAVA.<o:p></o:p>

  • Thinkpad X1 Mouse Issues with USB 3.0 Dock and WIndows 8.1

    I have a new X1 (3444-CUU) that I recently upgraded to Windows 8.1. When I connected to the Thinkpad USB 3.0 Dock, there was an automatic updated of the firmware on the docking station.
    Everything seems to be working except issues with my Keyboard and Mouse.Periodically, the mouse will disappear of the keyboard will simply stop working. Most recently, it was as if the delete key was stuck causing it to delete all my email (actually a feature I liked but unfortunately, can't allow).
    Is there a known issue with wireless keyboard?

    I have a possibly similar issue that seems to be related to the keyboard dock. In my case this is with logitec unified receiver, but what I found may help you narrow the issue's root cause.
    I found that after a reboot, the dock's USB ports (bothh SS or USB 3.0) will not recognize logitech's unified receiver. Even though it is Windows reporting it, it seems to be related to the hardware. What I do to have minimally invasive 'functioning' system is to undock the Helix (use as tablet). This makes the genuine USB 2.0 port of the tablet accessible. I then plug the receiver into that port and wait until the mouse is recognized. Then remove the receiver, re-dock the tablet on the keyboard dock and plug the receiver into the dock's usb 3.0 port. Then everything works.
    That seems to somehow circumvent part of the refreshing of the USB connected devices and allows them to work correctly.
    I wonder if that addresses your issue. Of course I am opening another thread and ticket with that issue (will post a link after that)

  • MacBook Pro Bluetooth Mouse Issue - Possible Bug??

    I recently purchased the new MacBook Pro and I have a weird issue with both the bluetooth Mighty Mouse and another Microsoft bluetooth mouse.
    So first, I purchased the mighty mouse thinking it would work great with my new MacBook, however, after pairing it and turning up the scrolling to the highest setting it was still way to slow for movement across the screen requiring me to pick up the mouse and move it to get all the way across.
    I had also installed Windows 7 on Parallels and was able to install my Microsoft Presenter Mouse 8000 on that with a dongle and it moved super fast just like I liked it. I had to use the dongle because for some reason Parallels didn't show the internal bluetooth. So I thought I would try using my Microsoft Presenter Mouse 8000 on the Mac side so I downloaded the Intellipoint 6.3 software that is made for mac and installed it on the machine then paired up my MS mouse. I then went in and set the settings to their highest settings for scrolling and once again I had the same issue as with the Mighty Mouse. Way too slow.
    So then I took it to one of the Geek Squad guys at Best Buy in my area to see if he could figure it out and he was stumped as well. However, after playing with it a bit we discovered that if you went into the native keyboard/mouse settings in the system preferences folder and dragged the scrolling setting to it's lowest setting and then back to the highest setting the Microsoft Mouse would move super fast like it is supposed to. I got all excited, however, the problem is that as soon as you closed that dialog box it goes back to slow again. Weirdest thing ever.
    So I have no idea what would cause that and would love some feedback from you all. I think it is a bug because in my opinion the Might Mouse should work better than anything else. Any thoughts anyone?

    This problem can be caused because of the mouse pad. Try using a dark color one with no reflective glare. Sometimes the light bounces.

  • Logitech V470 bluetooth mouse problems with new macbook pro.

    Got a Logitech V470 bluetooth mouse to use with my recent 2011 macbook pro running 10.6.7.  There appear to be several problems with this combination.
    1. If the mouse is not moved for a few seconds and I move it, the pointer does not respond immediately, and when it does, the pointer motion stutters and jerks across the screen for a few seconds before it starts moving smoothly. I don't see any spike in CPU usage when this happens.
    2. When I shutdown/reboot or sometimes even put the macbook pro to sleep and wake it up, the machine fails to communicate with the mouse, nothing happens even if I reset/restart the mouse or click, scroll or move it around. The only fix is to go to the bluetooth settings and set it up as a new device.
    I suspected a hardware problem on either the mouse or the mac, but (a) the mouse works perfectly fine on an older Sony Vaio laptop and (b) the apple wireless keyboard works pretty fine with none of these problems with my macbook. Would getting an apple magic mouse magically solve this problem?
    Has anyone else faced this situation, and could it be fixed?

    Any issues you are having with a "Logitech" product, should be dealt with their tech/customer support department.
     

  • Kensington Bluetooth Mouse Problem With 10.4.3

    After updating to 10.4.3, which updated bluetooth from 1.6 to 1.66, Kensington Mouseworks 2.8 no longer works with any of my Kensington bluetooth mice. A Kensington USB mouse works fine.
    Neither Apple nor Kensington was able to resolve this. Any ideas how to fix this until Kensington updates their drivers ?

    Original message was to Kensington:
    I can set up my device - discoverable - pairing and so on, but cannot get to the settings - fast, slow, scrolling, chording, etc. As a matter of fact when I select mouseworks under my system prefrences I get a window saying that there are no Kensington pointing devices found, but yet I'm using the device. The tracking speed of the cursor is uncontrollable at times. I am running OSX 10.4.3. Any help would be appreciated, otherwise I render this mouse to have a mind of it's own and not too useful to me.
    Their reply:
    Thank you for contacting Kensington Technical Support.
    As per the latest update from the concerned department, it has been observed that there are few compatibility issues between Mouseworks software and Bluetooth mouse on Mac OS X 10.4.3. Unfortunately, you are facing the same issue.
    However, it has been proved that the issue is not with Kensington software and Apple is working towards releasing a patch for this.
    Any solutions to date would be of great help.

  • Microsoft Bluetooth Mouse 5000 with Leopard

    Hi All,
    First post here, so be gentle!!!
    I bought a MS bluetooth optical mouse 5000, after i saw MS were marketing the same mouse on their website for mac (exactly the same product as the windows version) in a diff box.
    I seem to have issues with the intellipoint software, as such that is doesnt know the mouse is connected.
    The mouse is paired, and works OK, but just as a 2 button mouse.
    If i plug in my Wireless MS mouse, there is an option to select the mouse model i have, and the machine knows the mouse is connected, but using the bluetooth mouse, none of these options are available.
    My leopard install is fully up to date with system updates, and am using latest intellipoint software
    Any ideas??
    Thanks

    Welcome to the Apple Discussion Board!!!
    What version are you running? 6.2.2 is the latest according to versiontracker.com (http://versiontracker.com/dyn/moreinfo/macosx/14205).

  • Problems with HP Bluetooth Mouse x4000b with HP Elitebook laptop

    Hi - I bought an HP EliteBook laptop earlier this year and a few months ago purchased a HP Bluetooth Mouse x4000b (after losing a different mouse during travel).  I've had terrible problems, almost since the beginning, with the mouse just not working.  Sometimes it works if I switch the batteries (flip the positions of the existing ones) but that tends to last only for a short time.  I replaced the originally batteries (which were supposedly good for 9 months) after just 3 months; and have just replaced the replacements and the problem is still unsolved.  I've checked the drivers; I can't find a power setting for Bluetooth on my HP laptop (someone with a Dell had that).  I've turned the mouse off, rebooted, turned the mouse on and reconnected; I've tried turning the mouse off and on again; I've tried to ensure that the batteries are in snugly with the plastic piece that sits over that batteries inserted as far back into the body of the mouse as possible (replicating the setup that I found when I first opened the mouse up to deal with this problem).  Any suggestions?  Or can anyone suggest a better mouse?

    Hello ayd135,
    It is helpful if you would post the full model number of your Elitebook please.
    Read through this HP Bluetooth manual to see how to use the HP Wireless assistant to help troubleshoot issues.
    http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01948661
    Read through the info above first and try the steps.
    If this still does not solve the problem, then it sounds like you have a faulty mouse considering the battery issue you described. In which case, the only fix would be to replace the mouse.
    Pundravac,
    Even though you have an Elitebook also, your's could be a completely different issue. Did you install all the latest drivers for your old XP machine after installing Windows 7 on it?
    Please post your question in a new thread and post the full model number of that laptop also.
    Thank you.

  • Printing from web pages is excruciatingly slow with most recent upgrades of Firefox .Use an iMac and an HP officejet printer. Printer works fine with Safari and woodprocessed files, but not with Firefox and web pages.

    Printing from web pages is excruciatingly slow since downloading most recent upgrades of Firefox Mozilla. I have a desktop iMac, OS 10.6.8, and an HP officejet printer 4500 G510n. The printer works fine with the Safari Browser and with woodprocessed files, but not with Firefox and web pages. Help please! It used to print fast with earlier versions of Firefox.

    Hello and welcome to the Apple Discussions Forum.
    I have hardly any experience with HP printers but since your posting has not been replied to yet I thought I'd offer some assistance.
    With the printer status and ink levels working, it shows that you have a connection to the printer. So I would look at the issue being with the protocol being used for the print queue on the Mac.
    Since you have XP and Vista working, I would check the printer queue configuration on either box. In XP, go to the Properties and select Ports. Click the Configure Port tab to view the connection. If you are using RAW, then this is known as HP Jetdirect-Socket on OS X. So if you are not sure what protocol was used before I would create another printer queue, this time selecting IP > HP Jetdirect-Socket. Then enter your IP address and select the K5400dn from the Print Using menu.
    If this still fails to print then please reply. There may be limitations with adding the HP driver this way that I am not aware of. There may also be other driver options you can look at, such as HPIJS. If Greg Sahli reads this posting he has expert knowledge on this matter and will be able to offer some guidance.
    PaHu

  • Problems with most recent Leopard upgrade

    Since the most recent upgrade of Leopard, my dual G5 is having major issues: external drives disappear, CS3 will not boot, says it is locked but it is not. Virex software crashes half way thru. iphoto buddy will not open new libraries. My install of Leopard went fine but now I am ready to go back to Tiger.

    Jo Ann Crebbin wrote:
    Since the most recent upgrade of Leopard, my dual G5 is having major issues: external drives disappear, CS3 will not boot, says it is locked but it is not. Virex software crashes half way thru. iphoto buddy will not open new libraries. My install of Leopard went fine but now I am ready to go back to Tiger.
    Virex is not compatible with Leopard. When I migrated, I received a warning to that effect. It's a well-known issue - it crashes partway through a scan.
    It has been replaced by MacAffe's VirusScan 8.6
    Story:
    http://www.jaharmi.com/2007/11/23/mcafeevirusscan_86_installationleopard
    download:
    http://www.versiontracker.com/dyn/moreinfo/macosx/10355

Maybe you are looking for