Wacom Problems Intuos4 iMac 27"

I am getting the “A supported tablet was not found on the system” on the System Prefs. It is plugged in. I have installed the latest drivers. I have even removed and reinstalled using the Wacom Tablet Utility as per discussions I have found here.
I have a Wacom Intuos4 and an iMac 3.4 ghz Intel Core i7 with OS 10.7.5.
Thanks in advance for the help! I am desperate, thank you again!
Brian

Try disconnecting the tablet, uninstall the software.
Restart your Mac. Reinstall the Wacom software, then plugin your Wacom tablet.

Similar Messages

Hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m my problem is imac works fine in safe mode,but when you try to startup normal it's connstantly restart by it self.

hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
my problem is
imac works fine in safe mode,
but when you try to startup normal it's connstantly restart by it self.

in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
After five days of testing in the service they can not found fault and it was decided to change the graphics card.
New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.

You could look at the System Profile for the info it presents for the card. But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
What program are you trying to run? Is there anything in the system log?
I think it's the program that's having the problem and not anything with your video software.

Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. scree

Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank you

Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

Problems with iMac retina 5K (artifacts, glitches and etc.)

Hello dear Apple.
I have bought new iMac with retina 5K display and I have found lot of problem with it. It was December 2014 when I got my first iMac. And after then I have found few real problems with it.
The first problem is I can't open high resolution image with standard Preview.app. I mean 'high resolution' - more then 30-40 megapixels. When I open them, I can see image, but only 2-3 seconds, and after that I see horizontal artifacts only. I can't open images, like this Rembrandt.jpg; Carpaccio.jpg; Holbein.jpg
The second problem, when I change resolution in to scaled mode (System Preferences/Display) for increase image on display. I found when select some area on background of desktop it has left some lines after itself. It is particularly unpleasant if you have plain colour desktop background. You can view, how does it look here.
The next problem with animation in different parts of interface, e.g. sometimes when I open Time Machine some parts of windows are freezing or appear some artifacts or glitches near borders of window. And I have the same situation, when I open Mission Control, or any Adobe app or other, or simply rename a files. I have found few discussions with problems like mine, but in the separate places
5K iMac - bad GPUs?
Graphic Problems with Retina iMac
iMac 5K and indesign glitch
And after that I want to tell you that I have this problems on four (4) iMacs. It was really difficult to arrange four replace. I have lost a lot of time an spent a lot of nerves for discuss and resolve my problems with Apple support. Finally, they told me that they do not know about problems with iMacs, and they could offer give my money back. I glad to get my funds, but now in my country price for iMacs has doubled. And if they refund my money, I can buy half new iMac only.
I am sorry for my language and style, but I do not know what I should doing with that. And should I hope, that my problem resolve with OS X updates? Or it is hardware problem of the whole iMacs 5K...

Yes Ralph, absolutely correct, 4 times. Do you have the graphic card the same as me, or m290? Could I ask you check your iMac for few things, please?
For the first, can you enlarge scale in System preference/Display and install plain dark color desktop background. Are there any footprints after rectangular selection like in my video https://youtu.be/dBglFvjJx1Q?
And for the second, could you download this image https://upload.wikimedia.org/wikipedia/commons/0/07/Rembrandt_Harmensz._van_Rijn _-_Nachtwacht_-_Google_Art_Project.jpg and open in plain Preview.app, and zoom it? Are there any glitches?
Thank forward.

Recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124

recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124
chat with customer service at book company i purchased file:
"Me: I installed the proper adobe software, adobe digital editions 3.0 (now have updated to 4.0) on my mac running os 10.85 however I am getting the following error code when i try to open the file:
"Error getting License. License Server Communication Problem:
E_LIC_LICENSE_SIGN_ERROR"
Charles P.: Okay, what you need to do unfortunately, is contact Adobe at http://www.adobe.com and they will need to get your license issue resolved.
Charles P.: Is there anything else I can assist you with today?
Me: title of error is Unable to Download
Me: i dont see how that would be an adobe problem?
Charles P.: I understand, but it appears that the reason for the download issue is because of the license error the license is related to the Adobe Digital editions software. I understand how this could be confusing but it's due to the authorization of the ADE software. Adobe would need to correct your account issue with the license
Me: ok but i thought this was a free license from adobe??!! this is just a digital editions reader, right??
Charles P.: That is correct it is a free license but your account has to be associated with one license and yes the Digital edition is a ebook reader that our ebooks use for you to view

Well, just for the halibut I tried opening the book again today and , GLORY BE!, it worked.
Guess it may have taken overnight for Adobe to OK my license to their free ADE software. Also works now using Bluefire app as the reader on my android phone, although it was a pain
to get the book file in the right file folder for bluefire to see it.
I hope that time also heels the issue with all other Error Getting License users.
panman

HT3964 1st problem was IMac running slow. Shut down and unplugged several times with each time reboot being worse. Now, unplug reboot and eventually wallpaper background comes up but there are no icons?

1st problem was IMac running slow. Shut down and unplugged several times with no correction. Eventually, shut down, unplug and reboot resulted in wallpaper background eventually coming on screen but no icons. Nothing after that.

Kurt, do you know which exact iMac this is?
Have you blown the dust out lately?
Does it do better if allowed to cool off for a couple of hours?
What do you see if you hold Option or alt key at bootup?
Does it boot from the install disc holding c key at bootup?

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

Apple guarantees their work, take it back.

Kodak 6150 printer connection problem with iMac 10.64

I finally got tired of the HP printer eating me alive with ink costs. I purchased a Kodak 6150 printer. Surprised to find out I had to install drivers but that is done.
Here is the problem. If I connect the printer directly via USB to the iMac it works fine. If I connect it to my airport extreme I can print from my Macbook but NOT from the iMac.
Was running a trial version of Intego just to see if possible virus was reason for almost incessent presence of the rainbow wheel - no virus. I turned off the Intego and still no luck being able to print from the iMac.
Per the previous question I did double check and sharing for all is on. The little screen on the printer says it is connected to my network. The printer is about 2 feet from the iMac and the airport is halfway between them so no walls etc in the way.
Any idea's?
Thanks
flobrn
[email protected]

1. When printers are setup they JOIN a network, and they remember the network name and wireless password. Since that has been changed, you have to REJOIN the printer to your new network of your AirPort Express. Basically, the printer has to be reconfigured. You can always contact your printer manufacturer for assistance.
2. Navigate to the , then System Preferences, then Network. Click on the Advanced button on the bottom right, you should see a box with Preferred Networks. Remove the unwanted networks (such as your neighbors network).

Problem starting iMac on Yosemite

Hi, yesterday I installed Yosemite on my iMac 2.7 GHz Intel Core i5.
All was well yesterday, turned the mac off last night and back on again this morning to be presented with a white screen, Apple logo and a loading bar which gets to about a third of the way across and then stops.
Sometime the loading bar gets a little further and then stops and the pointer turns into a colour wheel.
After multiple attempts to start it finally completed loading and I got to my desktop.
I shut down and started up again to check it was just a glitch and had the same problem again.
After many re-starts I have finally got back up and running but obviously I don't want to shut down again until I find a solution.
I installed EtreCheck and got it to create a report:
EtreCheck version: 2.0.6 (91)
Report generated 23 October 2014 12:23:00 BST
Hardware Information: ℹ️
iMac (21.5-inch, Late 2012) (Verified)
iMac - model: iMac13,1
1 2.7 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce GT 640M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:19:44
Disk Information: ℹ️
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (943.73 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.epson.ews.launcher.plist Support
[running] com.kodak.BonjourAgent.plist Support
[running] com.mcafee.menulet.plist Support
[running] com.mcafee.reporter.plist Support
Launch Daemons: ℹ️
[invalid?] com.mcafee.ssm.ScanFactory.plist Support
[invalid?] com.mcafee.ssm.ScanManager.plist Support
[running] com.mcafee.virusscan.fmpd.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[running] com.f-secure.sync.BTCloud.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.kodak.KODAK AiO Annual Opt.plist Support
[loaded] com.kodak.KODAK AiO Firmware Updater.plist Support
[loaded] com.kodak.KODAK AiO Software Updater.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
BT Cloud Application (/Applications/BT Cloud.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SiteAdvisor: Version: 2.0 - SDK 10.1 Support
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
SiteAdvisor
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      3% WindowServer
      0% fontd
      0% Google Chrome
      0% mds_stores
      0% AppleSpell
Top Processes by Memory: ℹ️
119 MB BT Cloud
112 MB Google Chrome
77 MB ocspd
77 MB VShieldScanner
69 MB Mail
Virtual Memory Information: ℹ️
4.87 GB Free RAM
2.07 GB Active RAM
797 MB Inactive RAM
854 MB Wired RAM
1.60 GB Page-ins
0 B Page-outs
Can anyone offer any help with this issue please ?

Hi ..
"presented with a white screen, Apple logo and a loading bar which gets to about a third of the way across and then stops.
Sometime the loading bar gets a little further and then stops and the pointer turns into a colour wheel. After multiple attempts to start it finally completed loading and I got to my desktop. I shut down and started up again to check it was just a glitch and had the same problem again."
Uninstall the Mcafee security software > How To Completely Uninstall Software under Mac OS X [MacRx] | Cult of Mac
It's not necessary on a Mac.

OS 9 Install problem on imac G3

hello all,
i have an OS install problem on my imac . I just finished formatting the drive . the drive is
paritioned :
1st partition = HD1: 5.5 Gb
2nd partition = HD2 : 2.5 Gb
3rd partition = HD3 : 110+ Gb
Then, in order to save some time ( i thought ) , i tried directly install os 9 from an imac
DV CD , on HD1 : i thought i d be quicker so i would have to start with os 8.5 then upgrade to 8.6 and etc .
that turned out to be a bad idea. the system install warned me it couldnt install Air port because the hardware wasnt compatible . it gave me two options : either ignore this message or quit . i chose ignore : again certainly a bad choice .
After the install was finished , the mac wouldnt start on HD1 . the sytem install is apparently incomplete ,or anycase it doesnt work .
i then installed os 8.5 from original imac tray load install CD on HD2 , and it works fine .
now the question is : what should i do with my bad os9 system ? i need an operating system on this partition. perhaps i can trash it and reinstall mac os8.5 on it ? i hope there is a way to get out of this without formatting the drive again .
thanks for any advice .

about the os9 CD : it is a retail verson , only not of the same imac model .
That is not a retail version of OS 9. A retail version of OS 9 has no dependencies on any model of Mac. You have a machine specific disc which probably won't work with your iMac.
1/ i dont know how to reformat a partition without formatting the entire drive . perhaps you can explain .
In OS X you use Disk Utility and only select the partition that you want to reformat. It has been ages since I used OS 8 so I'm not sure if it is even possible using "Drive Setup".

Safari problems on iMac G3 slot-loading CRT

I'm posting here because I haven't been able to get a satisfactory solution to the problem on the Safari discussion board. Here goes.
I recently upgraded my son's iMac DV (A G3 processor) to OS X 10.3.9. Was having trouble launching Safari 1.3. It would start to launch and then quit. Here's the chain of events of fixes I've tried:
1) Machine -- iMac DV (G3) w/ slot loading drive -- was running OS 9.2.2 I tried to upgrade it to 10.3 with Panther discs. It told me I needed a firmware update, which I installed, then upgraded from the disc. Firmnware is now listed at 4.1.9f1 (Anybody know if this is as it should be?)
2) I then upgraded further with a 10.3.9 Combo download, which installed Safari 1.3. However, when I double-click the Safari icon, it won't open. Nor will it allow me to upgrade to 1.3.1 or 1.3.2.
3) I then downloaded Safari 1.2 again and re-installed that. That seemed to work and at least allowed me to get on the Web. But now, I'm back at version 1.2.
4) I tried repairing permissions. No go.
5) In desparation, I performed an Erase and Install of the system software from the Panther discs and got it back to 10.3.9 via the combo download. It then allowed me to update Safari to 1.3.1 and then 1.3.2, but it still won't launch.
I did the same thing to my daughter's iMac G3 and it all went fine. Only difference was, I was upgrading her from OS 10.2.8 and when I did, it did not ask me for a firmware update.
Any suggestions anyone?

Jamie,
Not being sure of what was suggested in the Safari forums....a few questions.....
* When you were able to get Safari to 1.3.1 did this open ok and just not 1.3.2?
* Not sure if it will help much but did you try trashing the Safari .plist file after downloading 1.3.2 (found @ ~/Library/Preferences/com.apple.Safari.plist) to see if that would help?
* Have you checked out Dr. Smoke's X-Lab FAQ for Multiple applications quit unexpectedly or fail to launch?
Personally, I doubt the firmware update (and yes that is the correct version you are showing) is to blame for the Safari failure but someone else may see it differently.
littleshoulders [:-)

Problem with iMac quality

I own a 27" iMac that is just less than 4 years old, and where after sending it for repair with Apple in Denmark was told that it needed a new graphics card for DKK 2899 - approx. USD 490.00.
I found out that the iMac is produced at a factory in Shanghai called W8 where Apple have had problems with exact same issue in the past, and it seems had agreed to extended warranty replacement to fix these problems.
Nevertheless I do believe that Apple customers buy Apple products because we expect superior quality and no Apple customer would expect to have problems with a major component especially on such an expensive products and certainly not within 4 years.
And if there were a seldom problem with a unit that Apple would rather step up to the plate and stand behind their products quality.
In my case it seems Apple - or at least Apple in Denmark - is unwilling to do so even though they acknowledge that it very seldom happen

Do you have a support system in Denmark to protect customers from problems with products and services. If so advance your complaint there. Irrespective of the warranty, here in the UK you can get official help against any supplier of goods that are faulty up to six years from purchase. But you must be reasonable in your approach. Apple's warranty promise specifically allows for this when it says ...
Coverage is estimated. Learn about Apple’s coverage information for your product. Your warranty is the same whether or not you register.  Important: Apple’s 1-year limited warranty and AppleCare Protection Plan benefits are in addition to rights provided by consumer law (see details). If you believe you have a valid consumer law claim, please contact us.

Problem with iMac mini DVI output to TV via VGA

Hi
I've searched these forums and Googled but haven't found the answer to this problem!
Basically, I'm trying and so far failing to connect an iMac that I bought in mid 2007 (v 5.1, OS X 10.6.5) to a new HD TV (Sony KDL-32EX403). I'm using a Mini DIV to VGA adaptor from the iMac with a VGA cable that goes into the 'PC' input round the back of the TV. When I try and select the 'PC' function from the inputs menu on the TV, the icon is greyed out.
No matter what I try - turning mirroring on and off, changing resolution, unplugging, restarting - it makes no difference. Weirdly the display menu does acknowledge that the Mac is connected to a Sony TV and gives a list of resolutions to choose from.
However... when I tried connecting my PC notebook using the straight VGA cable (output on the PC, input to the TV) the image appears fine. So I took the cable out of the PC, screwed on the VGA-DVI adaptor and plugged it back into the Mac and it worked! However when I switched back to TV mode I could not switch back to PC input, the icon was once again greyed out.
Sigh...
I see no reason why this doesn't work without this awkward workaround so if anyone can help or has had a similar problem please shout!
Thanks
Message was edited by: philbrownuk

I have my Macbook (early 2008) hooked up to a 19-inch TV I use as a second desktop. You won't find any cords that go straight from mini-DVI to HMDI, and even if you do I wouldn't recommend them. You'll have to get an adapter cable that goes from mini-DVI to DVI and then get a DVI to HDMI cable. I got the Apple-made adapter (about $20) even though it's more expensive because apparently third party ones can have problems. You can get a DVI to HDMI cable anywhere, they can run expensive but I got one off Amazon for less than $10.
That connection is video only so yes, you'd need a different connection for sound. As to how you hook the sound up, it depends on what you want to use for sound. If you want the sound to come from the TV speakers then you'd have to use a different cord than if you wanted to hook it up to a sound system. If you let me know I can explain what you'd need to do for that. Hope this helped

MacBook Pro 15" Late 2011 Problems with iMac 27" Late 2009 TDM

Hi,
I just got problems with my iMac 27" Late 2009 (Mini-DisplayPort) and my MacBook Pro 15" Late 2011 (Thunderbolt).
When I try to use my iMac as external monitor for my MacBook, there are massive glitches and graphical bugs on my second screen.
I bought a MDP-to-MDP wire from Belkin which works perfect on other computers.
I tried these things:
- Disconnected MagSafe from MacBook + unplugged all USB devices + switched graphics to discrete.
- Shut down all computers ... then booted MBP, iMac and triggered CMD+F2
- SMC, PRAM reset on both devices
The cable works, because:
17" MacBook Pro Late 2011 works perfectly on my iMac screen with my Belkin wire!
I connected my MacBook Pro 15" to a 27" Cinema Display and it works flawless.
After that I plugged it out and tested it again with my iMac screen -> suddenly it works.
Retriggering CMD+F2 or replugging breaks it again with massive bugs.
The MacBook Pro 17" is on 10.7.2, 15" is on 10.7.3, but I also tried to trigger dual screen in 10.7.0 setup with the same issue.
Maybe its a problem with the internal 6750M of my MacBook Pro 15"?
The 6770M of the 17" is working well.
Sample Video:
http://www.youtube.com/watch?v=W_pgc52syes
All updates/firmware updates of iMac and MacBook Pro are installed.
Any solutions?
Greets,
Kai

Since this is a user to user forum with no employees participation, your plea is a good a screaming into the wilderness. I suggest that you post your thoughts here:
https://www.apple.com/feedback/

Wacom Problems Intuos4 iMac 27"

Similar Messages

Maybe you are looking for