WAD 3.x not working with OS Windows 7

Dear Experts,
We are using BI 7.0 with ABAP Services. Hence using BEx WAD 3.x version for Templates instead of WAD 7.x.
On my PC, OS is Windows 7. While opening WAD 3.x it is giving message that "This application requires Internet Explorer 5 or higher. Inform your system administrator." Earlier it was Windows XP SP2 and WAD 3.x was working fine.
Also I have IE 8.0 on my PC. Please suggest the solution on the same.
Regards.
Deeps

Hi,
Please check the OSS Note below:
WAD 3.X is not supported in MS Windows 7
SAP Note Number: 1391689
-Vikram

Similar Messages

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

Why i-tunes not working with the windows 8.1?

i have windows 8.1 in my laptop,but i-tunes not working with it.when i connect my iphone with my laptop its not shown in itunes.
can you please help me?

See this support document. http://support.apple.com/kb/TS1538
The latest version of iTunes works just fine with Windows 8.1.

Windows key + left and right arrows not working with RemoteApp windows

My office is deploying RemoteApps to replace certain locally installed applications. I, and many of my coworkers, have 2-3 monitors and the Windows
+ left and right "snap" function has been an extremely convenient way to juggle multiple windows across multiple monitors. Unfortunately, it doesn't seem to work with RemoteApp windows. Does anyone know a way to get this working?

Hi,
Based on my test, I agree with Keith Langmead, it seems Windows key + left or right key cannot work with remoteapp.
Alex Zhao
TechNet Community Support

Adobe Active X will not work with my Windows 7. Suggestions?

My Adobe Reader 9.xxx was replaced with Active X, which will not work for me. I keep getting a box message that says perhaps the Adobe.com site is too busy at the tine. I would rather have my Adobe reader 9.xxxxx back as it worked very well for me. I have it on my other computer and it work fine. I am using Windows 7. Any suggestions?

Mike Garin wrote:
After making changes to Internet Explorer, per Adobe's instructions, Adobe Reader is now working. Thank you for your patience and your help.
Regards,
Mike Garin
From what I understand from this message, it would seem that your Reader passed from "not working" to "now working", whatever you may mean by these two expressions. I am glad.
May I suggest that next time you have a question, please try to state it clearly and also give enough and accurate details about your problem?
It would also be useful if you coud mark this question as Answered.

Chieftec blackbox external HDD, not working with GX740 Windows 7.

Hi
I have a Seagate Momentus® 7200.4 750GB
SATA 3Gb/s, 16MB, 7200RPM, 2,5"
using it with Chieftec CEB-25S-U3 HDD Chassi
2,5", SATA, USB 3.0, Aluminium, Svart/Silver
and it doesnt seems like the computer is actually accepting it as a harddrive or something.
It does find it, but i cant format it or use it as a harddrive, its just there.
Ive had the same problem with another external hdd, it didnt work on my gx740 with windows7, but it did work on an older computer with windows xp.
Dunno if it has anything to do with it, but the ENE CIR Receiver doesnt seem to be working in the computer. I dont rly know what it is tbh, but its under the HID Human interface Devices section.
Tryed to update the driver, but it just says it the latest drivers allready.
Ive allso had problems with the Bluetooth not working, so maybe the ENE CIR thing is the cause of that =P
/Snorki

ENE CIR Receiver is the infra-red receiver for Media Center remote controls (CIR = Consumer InfraRed).
Quote
and it doesnt seems like the computer is actually accepting it as a harddrive or something.
It does find it, but i cant format it or use it as a harddrive, its just there.
'Just there' where? Is the drive actually partitioned and formatted?
See: https://forum-en.msi.com/faq/article/how-to-add-a-second-hard-drive-for-storage

HP P1006 laserjet not working with a windows 7 Dell e5510 laptop

Hello
Any help is appreciated. When I plug into the usb I get an error message so therefore I can not continue with the installation of the drivers. aaaaaaahhhhhhhhhhhhhhhhhhh!!! This is frustrating.
thanks for any advice and suggestions

Hi Donaldparis,
After researching from the HP website, I realize that they do not release the HP LaserJet 3050 All-in-One Printer driver for Windows 7. It means that you will install the Windows 7 built-in basic driver and use the basic features. For more information about how to install the basic driver, you may refer to the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=3463669&prodTypeId=18972&objectID=c01856597#category4
Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If it does not work, you may also try to install the printer driver for Windows Vista under compatibility mode.
Install driver under compatibility mode & Administrator level
==================================
1.Right click on the exe file for driver and click Properties.
2.Click on the Compatibility tab.
3.Select “Run this program in compatibility mode for.”
4.Choose Windows Vista (Service Pack 2) from the drop down list.
5.Select “Run this program as an administrator” option under the Privilege Level topic.
6.Click Apply, click OK.
7. Please double click on the exe file again.
Good luck!
Arthur Li - MSFT

Cortana not working with new Windows 10 on Yofga 2 13

I recently updated to the new Windows 10 but am unable to get Cortana to work, even though all my setting are set to English (UK) (required if Cortana is to work). A search online has shown that the only other people I have found with the same issue also own a Yoga 2 13. Just wondering if anyone else with a Yoga 2 13 has had the same problem and if there is any way of overcoming this?

I have the same problem on my Z510. I have installed the very latest audio drivers but still not working. Like you, I have made sure that my region and language settings are all UK and have installed the UK English pack. I am beginning to think this is a Lenovo problem as, otherwise the WEb would be full of this.

Microsoft Arc Mouse not working with my Windows Xp home computer

I bought the MS Arc Mouse yesterday and plugged the USB into my home computer and nothing happened. I didn't get a popup saying "new hardware recognized" or anything and the mouse did not work. I tried the mouse in my mom's laptop and it worked instantly... does this mouse work for home computers? Why isn't it responding?

Unplug mouse.
Download driver: http://www.microsoft.com/hardware/download/download.aspx?category=MK (You need to select operating system, etc).
Install driver, and replug in mouse.
If it does not work at that point, establish that you are plugging it into back USB ports rather then front (as sometimes front USB ports are not powered). Also, try rebooting and changing ports.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Home Sharing will not work with my Windows 8 64bit with new itunes. All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App. They all did before. Only thing that has changed is new PC/itunes. Any Ideas?

Installed a new Windows PC on my home network. PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit. My itunes works, but I can not get Home Sharing to function now. None of my Apple TV's can see my computer library and prompt me to turn it on. All of my iphones, pods, pad, can not use the "Remote" app. When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code. I have reloaded iTunes, reset my router, updated all devices. You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to. Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before. However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV. Growing fustrated. Any ideas, would be helpful.

Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you

New Ipod nano not working with my Windows 2000

I have just bought an ipod nano 8GB, and tried to install it. The latest itunes I can put on my computer is 7.3.2 as it is a Windows 2000 not an XP. Unfortunately the nano is saying it needs 7.4 and above. can anyone help please?

I wish you would have asked or checked on the tech specifications for the Nano prior to purchase. These are the required tech specs, copied directly from the Nano page. I'm sorry there's nothing you can do.
# PC with USB 2.0 port
# Windows Vista or Windows XP Home or Professional with Service Pack 2 or later
# iTunes 7.6 or later

The latest version of iTunes will not work with my windows platforms. It cannot access the windows runtime library.

The latest iTunes can't access my windows (including Vista 32 & 64bit, nor Windows 7 64 bit and 32 bit versions) "Runtime" library. I've tried reloading the windows suggested .dll as well as doing a system restore and also downloaded the iTunes update and load it manually, but nothing will work. Is Apple aware of the problem and planning to release a fix, or do I have to abandon iTunes and my iPod?

Hello there, Enantiomer.
The following Knowledge Base article provides some recommendations for troubleshooting:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Wifi not working with bootcamp windows 7 install

I have installed window 7 enterprise via bootcamp however I can't get my wifi configured. Windows does not see the built in wifi. So I cant get to the outside world nor configure a wifi printer in window. Everything still works perfectly in OS 10.6.6. Any advise on how get to get the wifi working in windows would be great.

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

HT1222 why is my itune program not working with my windows 7 computer

Windows 7 keeps shuting down my i tunes!

Try resetting your printing system. In System Preferences/ Printers & Scanners, control click on the Printers box on the left and this brings up the Reset Print System option. This will clear all printers from the list and you can then add your printer again.
Check the printer's USB cable connection, if it has one.

Apple 23 Cinema not working with nvidia 5200...help!!!

Hey all!
I have an Apple 23" Cinema that is not working with my Windows XP machine using an NVIDIA 5200 128meg graphics card. The montior, when booting Windows, just flashes its power light 3 times...goes off...then repeats the sequence.
So, I tried a Dell 2007WFP with the XP machine using the DVI port of the card. When booting, it seems like it's going to fire up the monitor (shows splash screen and Windows logo) but then goes blank when it hits the desktop.
Oddly enough, when I plug in my Apple 30" into the DVI port of the NVIDIA card, it works just great. No fuss or muss (other than a resolution change).
The 23" also works fine with my MacPro BTW so I know the monitor is golden.
Any takers on this one?
Thanks in advance!

Hi Talon, I just accidentally came across your thread. Maybe I can help. I own a 23-inch cinema HD display but mine is ADC and I have to run mine through an ADC to DVI adapter.
Anyways on to the discussion...
The nvidia 5200 is a rather old-ish card (or chipset). The feature set in these older cards are not necessarily symmetrically reciprocal (what?) throughout the feature set. In other words, the feature may work in one mode and not in the another mode...etc...
You may have seen these specs on your 5200 card/chipset:
+Dual RAMDACs (up to 400 MHz) for display resolutions up to and including 2048×1536 @ 85Hz+
and thought this would be great, my resolution is less than that @ 1920x1200 on my 23-inch cinema display. However I believe this may be referring only to the vga output signal and not the DVI. Read on...
Further down in the specs for the 5200 card/chipset you'll see:
+DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200+
Unfortunately, this is not enough resolution to power your 23-inch display at 1920x1200. Windows may even show the resolution 1920x1200 as available (if you're able to get to the screen) but what I think it's not telling you, it that in order for you to be able to use that resolution you'll need to switch to dual mode DVI, and the card does this automatically.
For example: 640x800 to 1600x1200 uses single mode DVI and anything above that (like our 23-inch cinema HD monitors @ 1920x1200) +using this particular card/chipset+ will be using dual mode DVI whether the monitor can support that mode or not. From my experience with my HD cinema it uses single mode DVI.
As someone said above your 23-inch is in *single mode DVI* and from my experience only accepts *single mode DVI input* from the graphics card.
From my understanding of the specs and your description of the delimma, I would suppose that you are able to get the 30 inch display to work because the 30 inch is a *dual mode DVI monitor* and your graphics card does work in dual DVI mode up to your 30-inch resolution but ONLY in dual DVI mode.
Here are the specs on it:
http://www.nvidia.com/page/pg_20040109440047.html
I hope this helps you out.
If you were to ask my recommendation, I'd go buy a new video card that has higher resolution on the single mode DVI output. I can tell you that my ATI 2600 HD Pro (AGP) (windows version, not mac only) has two DVI ports that are both dual mode DVI capable but also dumb down to single mode DVI signaling at high enough resolution to support our 23-inch cinema HD single mode DVI displays.
Good luck!
Dibit

WAD 3.x not working with OS Windows 7

Similar Messages

Maybe you are looking for