WAD and ABAP

Hello Everybody,
I have requirement in which I want to display the results of an abap report in the table web item of the web application designer. Is it possible?
Is there a different way in which I can display the results of the abap program in the web application designer.
My basic aim is to then display the WAD content in the portal.
Thanks and Regards
Pradeep Bhojak

Hello:
A few ways you can go at this:
- Create a Report-to-Report (RRI) interface target for that ABAP program, so that the user can easily select it from the navigation menu of an existing BW web application.
- Use a virtual InfoProvider with services.
You can implement exit coding to perform some specific actions. This is a re-design, though, I know.
- Change your report to write the results direclty into a table. Turn the table into a datasource, load the data into a regular cube.
- And then it comes down to the rhetorical question: "why do you want to do this?" In other words, you ought to be able to meet the requirements through normal BW modeling, formulas, variables, user exits, etc.
Regards -
Ron Silberstein, SAP

Similar Messages

SSO and ABAP Web Services

I am opening this thread on behalf of my colleague Bala regarding SSO and ABAP Web Services.
We have gone through single sign on options and found several options are available within 5.0.
We would like to know the options available for SAP ABAP web services access from a Non-SAP system with user authorization but without Portal/ITS installation.
Also I would like to avoid any hard coding of user id in Non-SAP system .
Could you provide any information.
Thanks,
Bala

We have gone through single sign on options and found several options are available within 5.0.
Tell me what are the several options and what is your Non-SAP system?
without Portal/ITS installation.
ITS is now an integral part of ECC 5.0 system. So would not need a seperate installation, unlike earlier versions.
AB

Any website for XSLT AND ABAP mapping

Hi XI experts,
I am looking for any good website/Material for XSLT and ABAP Mapping with examples.
So experts if you any one of you have any clue , i would appreciate it , if you post the info here .
Regds,
Ram.

Hi,
For XSLT mapping, please try to create msg types for sender and recv, import these two into XML Mapforces (This is a software which enables us to do mapping this you can download from altova mapforce site) , do mapping in that mapforce , late click on XSLT icon , one XSLT file will be c reated that file , prepare zip and late come to xi , import under imported archieves,do Interface mapping by selecting the XSLT mapping option, select imported archieve..
See below examples..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
http://www.troobloo.com/tech/xslt.toc.shtml
http://www.w3schools.com/xsl/
http://www.w3.org/TR/xslt
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/frameset.htm
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/generic%20xslt%20mapping%20in%20sap%20xi%2c%20part%20i.pdf
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Required XSLT Mapping tips!
Regards
Chilla..

Java and abap stack connection

Hello,
how to check connection b/w Java and ABAP stack.
I am getting below error :
SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t</SAP:P1>
We did some upgrades of kernel and jvm and started getting this error.
Please suggest

Hi,
Check this threads
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE . Pls help
Regards
Ramesh

CRC failed in Java and ABAP Trial Version on Linux - VMware Edition part02

I download SAP NetWeaver 70 - Java and ABAP VMware Trial and I couldn't install it because part02 rar file has reported a checksum error.
- SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC failed in SLES10SP1_Test_Drive(2)-s003.vmdk. The file is corrupt
Also, I think file SLES10SP1_Test_Drive.vmdk is missing from the archive files.
Could you please, confirm that the archives in the sdn downloads are correct!

I also have the same problem, CRC error:
X:SAPSAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC hiba a SLES10SP1_Test_Drive(2)-s003.vmdk-ban. A fájl sérült

ABAP and ABAP Objects

Hi ,
What is the exact difference between ABAP and ABAP Objects?

Hi,
Look at:
<a href="/people/dirk.feeken/blog/2007/07/06/abap-trial-version-for-newbies-part-17--your-first-abap-object Trial Version for Newbies: Part 17 - Your first ABAP Object</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1591ec90-0201-0010-3ba8-cdcd500b17cf">ABAP Code Sample for Objects</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2503f09c-0801-0010-dc89-80bab376e4b8">Object Oriented ABAP - Local and Global classes</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47">ABAP Code Sample to Learn Basic Concept of Object-Oriented Programming</a>
<a href="https://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/37c5db90-0201-0010-3a9b-d0a5288f3c15">Eight Reasons Why Every ABAP Developer Should Give ABAP Objects a Second Look</a>
<a href="https://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3e59b790-0201-0010-88aa-bc8a7f95f6fb">Why use ABAP Objects</a>
<a href="https://media.sdn.sap.com/public/eclasses/teched04/ABAP151_files/Default.htm#nopreload=1">ABAP Objects for Java Developers</a>
Regards.
Marcelo Ramos

Java Maping and ABAP Mapping

Hello,
Pls let me know about Java Maping and ABAP Mapping
Also pls provide good simple scenario blogs for Java Maping and ABAP Mapping.
Regards

Hi Ranchit,
Check these links for Mappings
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
https://websmp102.sap-ag.de/~sapdownload/011000358700003604872004E/MappingXI30.pdf (Need Service Makrket place ID)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8a57d190-0201-0010-9e87-d8f327e1dba7
JAVA Mapping BLOGS
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
/people/stefan.grube/blog/2006/10/23/testing-and-debugging-java-mapping-in-developer-studio
ABAP Mapping Blogs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
Sachin
Message was edited by:
Sachin Dhingra

Netweaver Data base instances for Java and ABAP

Hello Experts,
Please help me to understand how the two technology stacks of SAP WAS (Java and ABAP) are configured to use underline data base in Netweaver.
Is it manadatory to have two separate data base schemas, one for ABAP applications and other for Java applications in the Netweaver?
If yes..the any idea about what are those schema differences??
- Rajan

Hello Krishna,
Thanks for the reply.
Is there any way I can access these shemas? Are they the same by structure or there are major differences?
My requirement is to build a common schema out of these two and have the data from these two schemas to be consolidated in the new schema.
Any help will be greatly appreciated.
- Rajan

Users mapping between EP and ABAP system

Hello
I'd like to ask for some guidance in my quest
Current situation looks like this:
I've configured UME in AS Java to work with LDAP as read only data source. Then I've configured SPNego to run SSO - It works, users from MS AD can log into portal.
Now I have application in WD which authorizes via EP/AD - works fine.
And next step is users mapping between AD and ABAP backend (serving some BAPI's for WD app)
I've found a bunch of help pages starting from
http://help.sap.com/saphelp_nwce711/helpdata/en/0b/d82c4142aef623e10000000a155106/frameset.htm
But somehow it's quite complicated to achieve this mapping. I've tried to set RFC destinations logon type to user mapping but without succes.
Can anyone point me to some more clear example or give path to configure this scenario? Is there a way of configuring this with NWA or some XML file editing is required?
Any help will be appreciated.
BTW: whole environment is in version 7.11
Best regards
Maciej

There is no equivalent to SPNEGO on the ABAP side.
If your goal is to propagate the user, then possible options are:
-> Wait for SAML 2.0 or invest now in a SAML 1.0 provider.
-> Use the same kerberos ticket for the EP as what your ABAP system will accept: route = SNC and 3rd party libraries.
-> Issue SAP logon tickets for the ABAP system from the EP, and use these in your WDA.
Another option is to expose the service with saved logon data in the ICF. If the service is just a wrapper for the BAPI, then you can also consider using trusted RFC between the service and the backend, but this might not be acceptable for your service.
I have only done experimental stuff with this and some of the above is not released yet. Also consider the consequences, even if it "does work"...
Cheers,
Julius

1:n Message split and Abap Proxies??

Hello,
Can I not use Message split and Abap Proxy together? My scenario is MDM->File ->XI->Proxy->BI.
I am getting a single file syndicated from MDM and in XI If I use message mapping to do 1:n split in the message mapping, can I use it with Abap Proxies? As per the link below, XI adapter is not present in the list..We are on PI 7.0 SP14. Thank you..
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
Thank you for any suggestion..

Hi Thanujja,
If you see the message from Raj, I dont think we can split the messages for the proxy. This is beacause the splitting of messages take place at the Adapter Level only for the adapters on the Java stack.
As suggested by Guru, you can try splitting the messages in the inbound proxy instead of using a BPM, in that way you can acheive good performance.
Thanks,
Srini
Edited by: srinivas kapu on Mar 27, 2008 9:09 AM
Edited by: srinivas kapu on Mar 27, 2008 9:10 AM

Using XSLT to link XML and ABAP data

Hi Experts,
I am using XSLT to deal with XML and ABAP data.
I using the following statement to convert a Internal Table to XML String:
CALL TRANSFORMATION id SOURCE root = lt_sflight RESULT XML l_xml_string.
And I get the XML String:
<?xml version="1.0" encoding="utf-16" ?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ROOT>
<SFLIGHT>
</SFLIGHT>
<SFLIGHT>
</SFLIGHT>
</ROOT>
</asx:values>
</asx:abap>
But What I expected is:
<?xml version="1.0" encoding="utf-16" ?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ROOT>
<DATA>
</DATA>
<DATA>
</DATA>
</ROOT>
</asx:values>
</asx:abap>
Could you tell me how to get my dream format using XSLT?
Best Regards,
Guo Guo Qing
Edited by: guoqing guo on Jun 11, 2008 9:58 AM

Hi Experts,
I am using XSLT to deal with XML and ABAP data.
I using the following statement to convert a Internal Table to XML String:
CALL TRANSFORMATION id SOURCE root = lt_sflight RESULT XML l_xml_string.
And I get the XML String:
<?xml version="1.0" encoding="utf-16" ?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ROOT>
<SFLIGHT>
</SFLIGHT>
<SFLIGHT>
</SFLIGHT>
</ROOT>
</asx:values>
</asx:abap>
But What I expected is:
<?xml version="1.0" encoding="utf-16" ?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ROOT>
<DATA>
</DATA>
<DATA>
</DATA>
</ROOT>
</asx:values>
</asx:abap>
Could you tell me how to get my dream format using XSLT?
Best Regards,
Guo Guo Qing
Edited by: guoqing guo on Jun 11, 2008 9:58 AM

Java Stack and ABAP Stack

Hi Experts,
i am now confused about these two stacks: Java Stack and ABAP Stack.
for IR objects, like DT, MT, SI, MM, SM, Action, Process Integration Scenario
for ID objects, like profile agreements, receiver determination, interface determination,
1. where are these objects stored in? Java or ABAP stack?
and i know Adapter Engine is run on JAVA Stack while Integration Engine is on ABAP Stack.
2. how do they call the objects stored in different stack during processing?

Hi,
1. where are these objects stored in? Java or ABAP stack?
These objects are basically developed on the JAVA stack, when they are activated their runtime version is created on ABAP stack, which you can check in SXI_CACHE transaction.
2. how do they call the objects stored in different stack during processing?
Runtime versions of these objects are responsible for the execution of the interfaces.
-Supriya.

Form - Perform and ABAP coding

Hi:
I have a requirement to get vendor address from database and print on the form. I could print only one field only Name1, but not details like Street or country Etc are not getting printed. Even if we pass multiple variables as input and putput variables using perform of form, I think we need to declare only one input as INTTAB STRUCTURE ITCSY and one out put variable as OUTTAB STRUCTURE ITCSY in the ABAP program. In the program I am using Index option like 1, 2 and modifying details of OUTTAB. Is it correct?.
Still I am unable to print complete address on the form.
For this I am unsing Perfom option in the form.
Can you please help in the following:
1) Can I pass one value vendor from form using perform and get back a structure from ABAP program?.
2) I am using following:
         DEFINE &VENDOR_NAME& = ' '
         DEFINE &VENDOR_STREET& = ' '
         PERFORM GET_DATA IN PROGRAM Z_TEST
                   USING &VENDOR_NO&
                   CHANGING &VENDOR_NAME&
                   CHANGING &VENDOR_STREET&
         ENDPERFORM.
For Printing I am using inthe form
                    &VENDOR_NAME&
                    &VENDOR_STREET&
In the ABAP program I am using
FORM GET_DATA TABLES INTTAB STRUCTURE ITCSY
                     OUTTAB1 STRUCTURE ITCSY.
IF SY-SUBRC EQ 0.
    SELECT SINGLE NAME1 STR_SUPPL1
       FROM ADRC
       INTO (V_NAME1,V_STR_SUPPL1)
       WHERE ADDRNUMBER = V_ADRNR.
    IF SY-SUBRC EQ 0.
*- Name1
      READ TABLE OUTTAB1 INDEX 1.
      MOVE V_NAME1 TO OUTTAB1-VALUE.
      MODIFY OUTTAB1 INDEX SY-TABIX.
*- Street
      READ TABLE OUTTAB1 INDEX 2.
      MOVE V_STR_SUPPL1 TO OUTTAB1-VALUE.
      MODIFY OUTTAB1 INDEX SY-TABIX.
ENDIF.
Can you please check above code and let me know if I am doing mistake anywhere?..like passing variables, printing variables on the form and ABAP sub-routine etc.
Please do not copye again same code what is find in SAP ABAP help.
Thanks in advance for your help.
Thanks,
Rama

Naren:
Your code did not work...
Sorry I did not paste my complete code(when I posted message )as too much code might be confusing. Please find my code below:
FORM GET_DATA TABLES INTTAB STRUCTURE ITCSY
                     OUTTAB1 STRUCTURE ITCSY.
DATA: V_ADRNR          LIKE LFA1-ADRNR,
            V_NAME1          LIKE ADRC-NAME1,
            V_STR_SUPPL1 LIKE ADRC-STR_SUPPL1,
            V_LIFNR             LIKE LFA1-LIFNR.
READ TABLE INTTAB INDEX 1.
V_LIFNR = INTTAB-VALUE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = V_LIFNR
    IMPORTING
      OUTPUT = V_LIFNR.
SELECT SINGLE ADRNR
    INTO V_ADRNR
    FROM LFA1
     WHERE LIFNR = V_LIFNR.
IF SY-SUBRC EQ 0.
    SELECT SINGLE NAME1 STR_SUPPL1
       FROM ADRC
       INTO (V_NAME1,V_STR_SUPPL1)
       WHERE ADDRNUMBER = V_ADRNR.
    IF SY-SUBRC EQ 0.
*- Name1
      READ TABLE OUTTAB1 INDEX 1.
      MOVE V_NAME1 TO OUTTAB1-VALUE.
      MODIFY OUTTAB1 INDEX SY-TABIX.
*- Name1
      READ TABLE OUTTAB1 INDEX 2.
      MOVE V_STR_SUPPL1 TO OUTTAB1-VALUE.
      APPEND OUTTAB1.
    ELSE.
      READ TABLE OUTTAB1 INDEX 1.
      MOVE 'NO NAME' TO OUTTAB1-VALUE.
      MODIFY OUTTAB1 INDEX SY-TABIX.
    ENDIF.
ENDIF.
ENDFORM.
I am not sure where the mistake can be in the SAP-Form or in the ABAP Subroutine code....
Thanks,
Rama

BOR Object and ABAP Class

Hi,
Can anybody say when to use BOR object and Abap class in the task with an example.
Thanks,
Mugundhan

There is no any specific condition or rule that for this purpose you need to use BOR and Class , it depends on your requirement. not only the requirement but also the new techniques to make classes not just as simple way to create objects but when you use classes in the Workflows they are not simple classes but they are BUSINESS CLASSES which makes a lot of difference.
Check the blogs of [Jocelyn Dart|https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action%3fpageid=55566]

Workflow and ABAP OO

Hi,
I have read the excellent blogs on Workflow and ABAP OO by Joycelyn Dart (/people/jocelyn.dart/blog/2007/07/16/referencing-bor-objects-in-abap-oo-classes). I have sucessfully created a BO (of type SIBFLPORB) in my class. However, I cannot figure out how to retrieve the workitem container that holds the BO. I have used macros before in workflow programming exists, but there I get the container from a workitem context. I can't find the workitem context in my class. Please provide me with some code samples of how I can retrieve the workitem container that holds the BO.
I am considering passing the workitem id to the method and reading the container via SAP_WAPI_READ_CONTAINER. If this is a good solution, then I see no point in having the BO as an attribute of the classe. Is it a good solution?
Thanks!
Elvez

I am probably missing something obvious here (or we are not even speaking about a same thing), but I still try to clarify my point.
>I could of course just pass the necessary data as parameters to the class
This is the part that I don't really understand. If you already have an instance of a class existing (=there is an object instantiated), which has the BO as an attribute, there shouldn't be any need to change a signature of any method(?). The only thing you need to enhance is the constructor of your class.
Currently you create the BO instance as an attribute in your constructor method (isn't this correct?). Just create the attributes you need from the BO into your class, and "populate" them in your constructor. Or if it is an method that you need, just create a similar method (=you can copy the code) into your class.
This all might be much easier than using the WF macros, which shouldn't be that difficult either - as Jocelyn says:
"You will still need to use BOR macros in your ABAP OO classes if and only if you want to call BOR attributes and methods in your ABAP OO methods.
If you need to do this then make sure you include the BOR macro definitions in your class by putting the special include program <cntn02> in the "Macros" section of your ABAP OO class."
Regards,
Karri

WAD and ABAP

Similar Messages

Maybe you are looking for