WAD BI 7.0 Features

Hello Gurus,
  Can anybody update me about the new featues of WAD in BI 7.0 ?  In the sense I would require the difference between 3.5 and 7.0  WAD.
Points shall be assigned for sure.
Thanks in advance,
Kind Regards,
Sunitha

Hi,
WAD demo in BI 7.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6dd54713-0c01-0010-8691-a3576b9a95d9
Also
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
WAD 3.5 vs 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/05154219fce12ce10000000a1550b0/frameset.htm
Hope this helps.
Thanks,
JituK

Similar Messages

  • Plug-ins factor into crossgrade to AI CS3

    Yes, you can crossgrade to AI CS3 from FH9, 10 or MX for $199
    US.
    However, when planning a switch, make sure you also include
    the price of the
    ton of third party plug-ins you'll need to buy to get close
    the same
    functionality as many FH features you may rely on. You'll
    need to fork out
    wads of cash for features such as multiple pages, scale
    drawings, bending
    line segments, joining multiple path segments, knife tool,
    perspective
    drawing. I could go on.
    If there are plug-ins and/or scripts that can fully duplicate
    the
    functionality of FH's Find & Replace Graphics, I haven't
    found them.
    Do your research before assuming you can easily jump to
    Illustrator.
    Here are a few reasons I use FH instead of Illustrator:
    -- Name all colors in document
    -- Find & Replace color in document, page or selection
    -- Find & Replace path shape
    -- Multiple pages
    -- Paste Inside
    -- Interactive rounded corners on rectangles
    -- Live shape primitives - polygons, stars, etc.
    -- Live ellipse segments
    -- Join selected path segments (requires concatonate plug-in)
    -- Convert multiple points to curve, corner, retract handles,
    automatic
    handles
    -- Split paths at multiple subselected path segments
    -- "Bend-o-matic" -- bend straight path segment by dragging
    with pointer
    -- Custom ruler scales
    -- Scale raster images numerically from original size
    -- Easy handling of linked images, including extract image
    -- Adjustable snap and pick distances set in preferences
    -- New object default preference
    -- Type on a closed path, upright top and bottom
    -- Zoom view to 512,000 X
    -- Tiled printing with specified overlap
    Additions or corrections welcome.
    Judy Arndt

    > However, when planning a switch, make sure you also
    include the price of the
    > ton of third party plug-ins you'll need to buy to get
    close the same
    > functionality as many FH features you may rely on.
    I rave as much as anyone about the ill-advised need to build
    dependency upon third party add-ons in AI. However, it can also be
    argued that Illustrator offsets some of that with other features
    which FreeHand has never had. Yes, GF&R saves time in FH. On
    the other hand, AI's built-in macro facility (Actions) saves huge
    amounts of time, too. FH has never had a macro utility.
    Illustrator's (and the rest of the CS apps') support for
    Javascript is another huge productivity advantage. And I'm not just
    talking about building Javascript substitutes for FH features like
    joining multiple paths, reversing paths, retracting handles, etc.
    I'm talking about the ability to create your own features for your
    own specific needs. Just a few examples which I use:
    A simple Javascript instantly creates a set of numerically
    serialized text objects for such things as callouts in maps and
    tech illustrations, or for serialized items like tickets.
    Another script randomly fills a user-defined rectangular area
    with any number of copies of any object.
    Another randomly assigns defined swatches to any number of
    selected paths.
    Another creates a halftone from a raster image in which each
    halftone dot is an instance of a user-defined Symbol.
    Another corrects the z-stacking order of selected objects,
    based upon their vertical position on the page. (I use this for
    processing tabular text in CAD imports.)
    Okay, you don't want to build Javascripts. Point is, the more
    AI users do it, the less likely you have to. AI Javascript is
    completely cross-platform. People share them all the time, for
    free. So for me, this is a huge productivity advantage which FH
    cannot match. I miss having GF&R when using AI, too. But I've
    already become just as dependent upon AI's Javascript support and
    Actions. Moreover, the JS advantage is compounded because the same
    thing is supported in both InDesign and Acrobat.
    > You'll need to fork out wads of cash for features such
    as multiple pages, scale drawings,
    And you'll find after doing so that even the most often-cited
    plug-ins for those fall far short of the elegance of built-in
    features. CAD Tools' treatment of custom scales looks to me like a
    bitmap overlay over the AI rulers. I don't have the latest version,
    but in the version I have its performance is quite poor.
    On the other hand, FH's custom rulers compare rather weakly
    against those in other programs, too. Just the other day, Judy, you
    answered someone needing to set up a scale using microns as the UOM
    with a rationalization that FH "is not a CAD program." Well, Canvas
    isn't either, but the kind of scale the correspondent needed can be
    set up in seconds in Canvas.
    Third party plug-ins for "multiple pages" are really nothing
    more than schemes to use layers or page tiling as pretentions of
    multiple pages. Those who offer them just don't get it. FH's
    innovative approach to multiple pages offers illustration-centric
    advantages none of the AI plug-ins I've seen offer.
    On the other hand, Adobe did in CS2 add a reasonable
    interface for managing an array of same-size page tiles on AI's
    artboard. No, it does not even come close to measuring up to FH's
    versatile page handling (and I tell Adobe that at every
    opportunity). But again, when it comes to the bottom line of total
    productivity, an advantage in one program can compensate for an
    advantage in the other. For example, it's pretty dang handy to be
    able to be flipping through a multi-page PDF in Acrobat, rightClick
    the page with the TouchUpObject tool, select EditPage, and have
    that page open in Illustrator for editing. Make the edits, select
    Save, and you are returned to the PDF in Acrobat.
    > Do your research before assuming you can easily jump to
    Illustrator.
    Always good advice.
    > Name all colors in document
    > Find & Replace color in document, page or selection
    I haven't laid hands on it yet, but reading between the lines
    of the new color handling in CS3, I suspect it may provide those
    and more. If not exactly those, then other color handling features
    which FH does not have. I, for one, will welcome the color schemes
    functionality.
    Find & Replace path shape
    > Paste Inside
    I'm not sure if this has changed in CS3, but I suspect it may
    have. The problem with AI's Clipping Masks is not functional, but
    interface. The interface displays the edges of masked portions of
    whole clipping path group when selected, and displays the whole
    contents' dimensions, and performs alignments upon the whole
    contents' bounds, rather than those of the clipping path. But I've
    see mention of ability to align points having been added to CS3,
    and it seems logical to me that some of the Clipping Mask problems
    may have been addressed as part of that. Again, we'll see.
    Live shape primitives - polygons, stars, etc. [including
    rounded rectangles and ellipse arcs]
    Agreed. On the other hand, the ability to apply Convert To
    Shape as a live effect to individual stroke or fill attributes in
    the Appearance Palette is a somewhat offsetting advantage of AI.
    > Join selected path segments (requires concatonate
    plug-in)
    I built a pair of Javascripts for this, which work much like
    FH's Join command, but which gives me the option of whether
    pre-existing outboard handles are respected. I use it every day.
    Understand, this is NOT to make any excuse for the inexcusably poor
    Join command in AI.
    > Convert multiple points to curve, corner, retract
    handles, automatic handles
    Judging by the screenshots of CS3, most, if not all, of that
    is now provided. Yes, 20 years late, but today is what matters
    today.
    > Split paths at multiple subselected path segments
    Actually, you can do that in AI, but by different means.
    DirectSelect the segments instead of the points. Cut, tap Delete,
    PasteInFront. For my own purposes, I wanted it to work more like
    FH, so again, I wrote myself a pretty simple Javascript to just
    break selected points.
    > "Bend-o-matic" -- bend straight path segment by dragging
    with pointer
    As you may recall, you're singing one of my favorite tunes
    there. On the consolation side, though, selection behavior has been
    altered in CS3 (something I really figured would be "holy ground",
    never to be improved). According to what I read between the lines
    in Teri Petit's description, the tedium of having to continually
    deselect when using AI's white pointer should be aleviated in CS3.
    > Easy handling of linked images, including extract image
    Like multiple pages and Collect For Output, it should be
    built into AI. But for those who may not know, it's not that big a
    deal to save the AI file as PDF, have it automatically launch
    Acrobat, and then use Acrobat's Extract All Images command.
    > Adjustable snap and pick distances set in preferences
    Has been added in CS3. Also settings for the display of
    points and handles.
    > Tiled printing with specified overlap
    You can do that in CS2. It's in the Print Dialog's Setup
    pane. Select Tile Whole Pages, set the desired overlap, click Done.
    Turn on View>Show Page Tiling.
    continues...
    JET

  • Features WAD in BW7.0

    Hi BW-people!
    I am working on some features for web reports (one of them are the fixed/freezed column headers)
    As we are upgrading to BW7.0 in several months, I would like to know what the new features are in this release. That case we can avoid time-consuming development if it is a default feature in 7.0.
    So, does anybody know the new features? Or where I can find a list? (more spicific regarding the 'freeze pane' alternative of Excel in WAD)
    Thanks in advance!

    Bart,
    I have seen the possibilities of BeX Analyzer but in terms of WAD , what I could get from early presentations that SAP made are...
    1. Netweaver Visual Composer to be made a major component in Reporting
    2. WAD to e developed but not by much
    3. Lot of New features in BeX - like what you mentioned about fixed columns , freeze columns etc and in all likelihood , the same will be available in WAD 7.0 also
    4. Reports generated using Visual Composer are stunning but I am not convinced by the extent of customization allowed by the same.
    But of course I may be speaking too soon , since the only ppl who will have access to BI7.0 reporting capabilities are thos involved in  ramp-up and anyone ??
    my 0.02
    Arun

  • New Features WAD of SPS13

    Hi Experts,
      I need use a scroll bar in Analysis webitem in WAD. We show that new feature is avaliable in this SPS13,
    http://help.sap.com/saphelp_nw70/helpdata/en/76/489d39d342de00e10000000a11402f/frameset.htm
      So we upgraded the components :
      SPS to 13
      Saplogon 710 FEP 4
      BI SP2 and patch 1
      But unfortunately the paging new features didnt appears. (USE_SCROLLBARS ....).
    Have we forgot any upgrade ? Does anyone test this new feature ?
      Kind regards,
      Alexandre

    Hi Alexandre,
    Unfortunately, I am not at SP13, however I have something you can test.  It it possible that although the parameter is now valid for processing but not available in the WAD within the Analysis Item properties window.
    Try adding the parameter directly to the Instruction for the Analysis Item.  Something like the following and see how it renders:
      <bi:SET_ITEM_PARAMETERS >
                   <bi:cmd_item_parameters type="ANALYSIS_ITEM" >
                      <bi:USE_SCROLLBARS value="X" />
                   </bi:cmd_item_parameters>
                   <bi:TARGET_ITEM_REF value="ANALYSIS_ITEM_1" />
      </bi:SET_ITEM_PARAMETERS>
    Cheers,
    Dave

  • WAD 7.0 - Navigation Pane Web Item with Old 3.x features

    Hi Experts,
    Is there a way to get the WAD 3.x version Navigation pane in WAD 7.0.
    Navigation pane in WAD 7.0 is missing those "beautiful navigation icons" to add/remove a free char. into rows/columns and also to set filter values.
    We are on the latest SP - BW 7.0.
    Any suggestions, will be appreciated.
    Thanks
    CK

    Hello,
    I struggled with the same issue ...
    but here is a sollution. don not select a navigation pane but use the filter pane.
    in the filterpane you can define the number of kollums.
    and with drag and drop from the filter pane to the report you can use the same functions as wth the navigation pane.
    really works
    good luck

  • Change order of key figure is not working in Web report output (using WAD)

    Hi,
    We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
    Though same change order is working fine in Bex Analyser.
    Kindly suggest some inputs.
    Thanks.

    Hi,
    On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
    Regards,
    Bhagyarekha.

  • Difference between Bex Analyzer and Bex WAD

    Hi Every one,
    I am pretty new to SAP, and working on SAP BW Front end.
    I am pretty aware of Bex Analyzer and also Browser, but i always have a doubt about Bex WAD.
    In my present job i talk to the users and take the requirments and create queries in the Bex analyzer which i am comfortable doing it.
    I also know all the features of Analyzer and created quries and also published it on web, and also created workbooks and inserting multiple quries in the workbook etc etc..
    However i have zero knowledge on WAD and how it is useful to me, and as if now i haven't got any requirment from the client for me to create any report in WAD or do some thing in WAD.
    I have gone through SAP SDN help etc but i am not understanding it at all.
    So can any one explain me in a laymans terms what WAD is and how it will be useful to me?
    and also if possible send me link which has got PDF screen shots of what WAD is?
    Points is for sure.
    Regards,
    Ram

    Raj,
    Thanks for the reply, but i still did not get the understanding about WAD. i have studied the link which you sent me.
    I am still not able to understand how it is helpful for people like me,
    See i create my report in Query designer, and i can execute the query in Analyser. and if i want i can execute it in the Web from my query designer, and also i can create chart on the web if i want.And i can Broadcaste it in the Web.
    and also if i want i can create it in the workbook and create chart in that work book.
    Then what is the point of Web Application Designer (WAD).
    See i have created the Query in Designer in Development say Sales report Query on the infoprovider for SD, now what should i do with it in WAD.
    How can i get it in WAD, i went to start> all Programs>Bex> WAD and i logged in to development and a sereen opend. And from here what i can do, i mean how can i open my created query in WAD?
    As you guys know i am new to SAP itself, but i dont see any advantage about WAD, i read all the articals and there i found that i can create Web Items, HTML etc etc, but i already have HTML, when i execute my query from the Designer i get it in Web Browser...
    See my question is simple, i have a query which i have created in the Query Designer, now how can i get it to WAD and after getting it what can i do with it??
    If any one has a screen shots of there pls send me.
    And Sanjeev has sent me a PDF which i saw earlear and i done the same in my WAD but i am not about to get it to work.
    I have given the points to every one but still what i need i did not get yet.
    Regards,
    Ram

  • Your Favorite FreeHand Features You Would Like To See In Illustrator

    I am really curious to hear about the favorite features that Freehand users think would be important additions to Illustrator.
    I would also be interested in hearing why you think this feature is better than the way Illustrator handles the same task, unless you the feature just doesn't exist in Illustrator.

    Just found your question, Wade. Many thanks for asking since it is very encouraging to know that Adobe is aware of Freehand (FH) users' frustrations, beyond the usual learning curve challenge. Many CS3 Illustrator (AI) features are terrific and not available in FH, but the frustration of seeing FH's many intuitive options disappear from our desk top is difficult. I'd hardily amen the words of Ken Nielsen: ... 'incorporate EVERY feature possible from Freehand.' I am quickly improving my ability to exploit AI's advantages but still get frustrated that many of FH options are not available in AI. Here are a few and will try to add others later:
    PAGE SIZE TOOL: I cannot change the page size with FH's page tool. To get a page size to fit new art work I have to guess and run the risk of something not being open and not adjusting if I move my work. This is important to keep the white border from appearing in exports, although I have found that making a Clipping Path can solve this. Why not have the FH option, however, of diagonally dragging the corner of the page and fit it the size of the page to the art work?
    PEN TOOL DRAWING: The pen tool does not have an option that automatically makes beautifully curved lines (which always and exactly fit the complex map borders I draw), and simply by holding down Option in FH while clicking the pen tool (dragging out in AI is nice sometimes, but I had to buy a Big Wacom tablet to do what FH does naturally).
    OPEN/CLOSED PATH: I always knew in FH if my path was 'closed' or 'open.' I know fill does not depend upon this in AI but in my work to know this is very important.
    SWATCH BOX: In AI I have to remember the short cut or travel around my 30" screen to change between stroke and fill. In FH it was right in the color palette where it should be. As in the case of layers below, my choice of viewing swatches (small list) does not stick and I have to choose again every time I reopen AI. Have you thought of layers for swatches for those of us who have many?
    GRAPHIC STYLES: I thought AI had a 'Redefine' option in the Graphic Style but can't find it. Since AI does not allow the editing of a graphic style in the Style palette, I have to make a new style and toss the old one. FH has both of the possibilities (redefine and editing).
    PASTE INSIDE/CUT CONTENTS: Paste Inside, etc. was great in FH. I understand how it works in AI but to have the old FH option, and edit inside (hold down Option) were so easy.
    LAYERS: AI's great layer/sub layer/sub layer organization is especially exciting for me since my 300-400 layers in FH can be nicely 'compacted.' This has vast potential and already I cannot live without it. However, you should demonstrate how good it is to new users rather than simply imply 'you'll get used to it.' I have tons of docs with tons of layers (maps and charts).
    COMPRESS ALL SUBLAYERS NEEDED: I have my layers collapsed so that my palette is very easy to use, *but* when I close the doc and bring it up again they are all open again and I have to go through and close them. Make them 'stick' so they open the way we close them, and 2) put in a way to deal with sub layers so that we can make all of a certain set of sub layers visible/invisible or locked/unlocked without affecting other layers. Yes, I can drag my mouse down the list, but when I have 600 map city names in their individual sub layers that is a bit much.
    A BIT OF TROUBLESHOOTING: A graphic style fill would not change (disappear) although fill color was nothing. I even use 'Break Link to Graphic Style' and tried again. Something is wrong since the stroke changes color if I choose it manually or via a style, but the fill remains the same (one of my styles = 50% red) although I change it many all or via the Graphic Style palette. Thus it appears the the fill is stuck in one mode, or rather two since it will change color or change to gradient, but it will not disappear and always default to the 50% red. I tried quitting the program and bringing it up again, and also rebooting. No change. Finally, after long hours I tried putting the graphic on a new layer and it was okay. Thus, it appears that something can be 'caught' on a layer, in this case the fill color, or rather the fact that I could not get rid of the fill color, no matter what it was. I do have 310 layers in THE doc, most as sub layers under main layers.
    Must add that AI's Opacity, Layers, and other features are terrific. I finally have gotten over my reaction in the move from FH to AI, especially since CS3 version sped up the very slow CS2 version. Again, do everything you can to get all of FH features into AI. FH is a tremendous program which relatively few people knew of and exploited. If Adobe wants to create another real success story, follow Ken Nielsen's advice (as you are doing with your question, Wade.)

  • How to revert to diagnostics.wadcfg configuration from wad-control-container blob.

    Hello all,
    In our project at some point in the past we have enabled Diagnostics module for getting our log entries in Azure Storage. We added <Import moduleName="Diagnostics" /> to ServiceDefinition.csdef file and then enabled logs transfering and performance
    counters gathering in WebRole.OnStart method via DiagnosticMonitor.Start():
    DiagnosticMonitorConfiguration cfg = DiagnosticMonitor.GetDefaultInitialConfiguration();
    cfg.OverallQuotaInMB = 8192;
    cfg.Logs.ScheduledTransferLogLevelFilter = LogLevel.Verbose;
    cfg.Logs.ScheduledTransferPeriod = TimeSpan.FromSeconds(30);
    cfg.Logs.BufferQuotaInMB = 1000;
    // Define performance counter configuration.
    foreach (var counterName in PERFORMANCE_COUNTERS_NAMES)
    PerformanceCounterConfiguration perfCounterConfiguration = new PerformanceCounterConfiguration();
    perfCounterConfiguration.CounterSpecifier = counterName;
    perfCounterConfiguration.SampleRate = TimeSpan.FromSeconds(5);
    cfg.PerformanceCounters.DataSources.Add(perfCounterConfiguration);
    cfg.PerformanceCounters.BufferQuotaInMB = 1024;
    cfg.PerformanceCounters.ScheduledTransferPeriod = TimeSpan.FromMinutes(1);
    DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString", cfg);
    Then using Windows Azure Management Portal we activated Verbose monitoring mode and added several additional performance counters there in order to try the feature. I assume that doing that through the portal we actually modified wad-control-container blob
    so we got new performace counters configuration.
    Later we've realized that it would be better to manage all diagnostic configuration in diagnostics.wadcfg. We removed the code from role start and added diagnostics.wadcfg file to the project that declares the same we did before via code. When we redeployed
    we saw that the configuration remained as it was before - it didn't change at all. It still included new performance counters we added through the portal. It is because the order of precedence, where wad-control-container blob has the highest priority. So
    we deleted all the blobs from wad-control-container in order to revert back to diagnostics.wadcfg and redeployed the service. New blob was created in wad-control-container. It included everything from diagnostics.wadcfg as we expected and
    again we saw these custom performance counters we added via portal time ago. See below the blob content:
    <?xml version="1.0"?>
    <ConfigRequest xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DataSources>
    <OverallQuotaInMB>8192</OverallQuotaInMB>
    <Logs>
    <BufferQuotaInMB>1024</BufferQuotaInMB>
    <ScheduledTransferPeriodInMinutes>1</ScheduledTransferPeriodInMinutes>
    <ScheduledTransferLogLevelFilter>Verbose</ScheduledTransferLogLevelFilter>
    </Logs>
    <DiagnosticInfrastructureLogs>
    <BufferQuotaInMB>1024</BufferQuotaInMB>
    <ScheduledTransferPeriodInMinutes>5</ScheduledTransferPeriodInMinutes>
    <ScheduledTransferLogLevelFilter>Warning</ScheduledTransferLogLevelFilter>
    </DiagnosticInfrastructureLogs>
    <PerformanceCounters>
    <BufferQuotaInMB>4096</BufferQuotaInMB>
    <ScheduledTransferPeriodInMinutes>5</ScheduledTransferPeriodInMinutes>
    <Subscriptions>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\Memory\Available Mbytes</CounterSpecifier>
    <SampleRateInSeconds>10</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\Processor(_Total)\% Processor Time</CounterSpecifier>
    <SampleRateInSeconds>10</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\ASP.NET Applications(__Total__)\Requests/Sec</CounterSpecifier>
    <SampleRateInSeconds>5</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\ASP.NET Applications(__Total__)\Requests Executing</CounterSpecifier>
    <SampleRateInSeconds>5</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\ASP.NET Applications(__Total__)\Requests In Application Queue</CounterSpecifier>
    <SampleRateInSeconds>5</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\ASP.NET Applications(__Total__)\Requests Failed</CounterSpecifier>
    <SampleRateInSeconds>30</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\ASP.NET Applications(__Total__)\Requests Timed Out</CounterSpecifier>
    <SampleRateInSeconds>30</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\ASP.NET\Requests Rejected</CounterSpecifier>
    <SampleRateInSeconds>30</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\ASP.NET\Worker Process Restarts</CounterSpecifier>
    <SampleRateInSeconds>600</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <!-- OLD unnecessary counters that were added manually through the portal START-->
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\Memory\Available MBytes</CounterSpecifier>
    <SampleRateInSeconds>180</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\Web Service(_Total)\ISAPI Extension Requests/sec</CounterSpecifier>
    <SampleRateInSeconds>180</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\Web Service(_Total)\Bytes Total/Sec</CounterSpecifier>
    <SampleRateInSeconds>180</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\ASP.NET Applications(__Total__)\Errors Total/Sec</CounterSpecifier>
    <SampleRateInSeconds>180</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <PerformanceCounterConfiguration>
    <CounterSpecifier>\ASP.NET\Requests Queued</CounterSpecifier>
    <SampleRateInSeconds>180</SampleRateInSeconds>
    </PerformanceCounterConfiguration>
    <!-- OLD unnecessary counters that were added manually through the portal END-->
    </Subscriptions>
    </PerformanceCounters>
    <WindowsEventLog>
    <BufferQuotaInMB>0</BufferQuotaInMB>
    <ScheduledTransferPeriodInMinutes>0</ScheduledTransferPeriodInMinutes>
    <Subscriptions />
    <ScheduledTransferLogLevelFilter>Undefined</ScheduledTransferLogLevelFilter>
    </WindowsEventLog>
    <Directories>
    <BufferQuotaInMB>256</BufferQuotaInMB>
    <ScheduledTransferPeriodInMinutes>5</ScheduledTransferPeriodInMinutes>
    <Subscriptions>
    <DirectoryConfiguration>
    <Path>C:\Resources\directory\ac17d63416cf41c8acfebbbcb3d90052.Mbo.Services.Web.DiagnosticStore\CrashDumps</Path>
    <Container>wad-crash-dumps</Container>
    <DirectoryQuotaInMB>256</DirectoryQuotaInMB>
    </DirectoryConfiguration>
    </Subscriptions>
    </Directories>
    </DataSources>
    <IsDefault>false</IsDefault> <!-- DEFAULT IS SET TO FALSE AGAIN -->
    </ConfigRequest>
    We tried to directly edit this XML. We removed redundant counters and changed IsDefault to "true" value in the XML and updated the blob in the wad-control-container using Azure Management Studio. Next time we redeployed the service - the counters
    again appeared in the configuration and IsDefault reverted to false again.
    Does anyone know how to permanently revert to managing diagnostics configuration only via diagnostics.wadcfg file and force the Azure to forget about manual edits we did via the portal?
    We use Azure SDK 1.4. 
    Thanks in advance for any insights!
    Vitaly

    Hi Vitaly,
    Did you try to change diagnostics configuration in VS? Like this:
    I suggest you could click the "Edit", and select your diagnostics metrics. Also, I want you double check your  re-deployment  project whether is right. Please try it.
    By the way, I suggest you could upgrade your SDK version and refer to this sample:
    http://www.windowsazure.com/en-us/develop/net/common-tasks/performance-profiling/
    http://msdn.microsoft.com/en-us/library/windowsazure/hh411542.aspx
    Any question or result, please let me know.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Few WAD report  functionalities not compatible in windows 8.1 version

    Hi,
    We are currently facing an issue with one of the BEX(Web application designer 3.5) features not working as expected. we have currently using the BEX WAD report in windows 8.1 version and we see issues with the design of the report. The report is built in WAD 3.5 and it works fine in windows 7 OS where as there are some drawbacks of using this report in windows 8.1 . Has anyone faced the same issue, If so what could be the possible solution for this. Is there any SAP note that i can refer to??
    Thanks,
    Sneha

    Hi Gopal
    Could you check the limitations of SAP BI 7 tool on SAPGUI 7.30
    1640140 - BI 7.x tools in 730 - General Information & Limitations
    1652769 - 730 GUI DVD - BEx tools - HW\SW requirements
    1322923 - Maintenance strategy / deadlines BW Business Explorer (BEx)
    BR
    SS

  • Query Selection Screen in Report Designer/WAD

    Hi Gurus,
    Please help. Iam try to copy two BEx queries into one report using Report Designer & Web Application Designer. Iam sucessfull in it, however when I execute the report either by report designer or WAD, the report does not populate the selection screen, it just gives you the output of the two queires into one page. Is there a pre-settings we need to perform to get the selection screen for each of this report?
    Thanks!

    Hi,
    Front-end upgrade will not help in this case. This feature "Display Variable Screen [VARIABLE_SCREEN]" was introduced in SP8 backend. You need SP8 backend to be able to use it.
    You will find this setting in "Properties" -> "Web Template" (in combo box) -> "Web Template Parameters" -> "Behaviour" -> "Display Variable Screen"
    This setting is defined in metadata and required an implementation on Java side (also SP8 required)
    Regards, Karol Kalisz
    SAP BI Development

  • Features in Patch 6.4 missing from ZCM Patch MGMT 11.2.1.0

    We are migrating from Novell ZENworks Patch Mgmt v. 6.4.2.1592 to the ZCM v. 11.2.1.0 patching service. I've noticed that there are are few features in the Patch mgmt 6.4 that I don't see in ZCM 11.2.1.0 and want to see if I'm just missing them somehow. I've looked throught the zen11_pm_administration manual and could not find any info on the following:
    1) In Patch 6.4 when looking at the vulnerabilities/patches, you could filter by a specific OS in that it would only show patches (for example) for Windows 7 32bit workstations...and those patch results would only display "patched" or "not patched" numbers for that specific OS. In ZCM 11.2 patch mgmt...it appears that it can only filter by Platform: Windows, Vendor: Microsoft. With this filtering it mixes all the XP, Windows 7 32bit, Windows 7 64 bit, and Windows server patches all together. In the patch name field I can put "Windows 7" but it display 32 and 64 bit as well as patches for servers and includes servers in the numbers for "patched vs not patched". I would like to be able to filter the patches to show for example only patches for Windows 7 64bit workstations and have it reflect the workstations with only Windows 7 64 bit as it does in Patch 6.4. We have ZCM servers in our system but are using a different method to patch them. Basically, I currently have to wade throught the patches for Windows 7 (for example)..select the ones I want..and if that patch also is for Server 2008...I have to make sure that after the deployment creation is completed to remove the servers from the deployment. It would be much easier and efficient to be able to filter out the patches for a specific OS and apply those patches to only that specific OS workstations. Any ideas if this is possible under ZCM 11.2.1.0 patching?
    2) In Patch 6.4 you could configure a policy for snooze and reboot options. Then when completing the deployment wizard...you could select "Use policies" for these options. Is there a place to configure these presets in ZCM 11.2.1.0 or does one have to manually change them every time a deployment is created?
    3)Once a deployment is set to a group of test workstations, in Patch 6.4 I could export the list of worksations in the test deployment to send to the helpdesk in case they received any calls. Is there an option to do this in ZCM? There doesnt seem to be one.
    Any info or feedback would be greatly appreciated.
    Thank you,

    Michaelstump,
    is there a reason you posted in the ZCM *10* patch management forum? At
    this time, I agree, some things are better with ZCM patch management,
    some things are not...
    Shaun Pond

  • Problem in Export to Excel in WAD

    Hi,
    We are facing problems while using the "export to excel" feature in WAD.
    While displaying the report in WEB or even RRMX, the display is fine for all fields of the report. However, when i use the export to excel feature from WAD, the fields with length of 24 characters are not displayed correctly.
    It is displayed as "1.4E+23" (this feild displays numbers), whereas the number should be "140000000000000001232007".
    Please can someone tell me what the possible problem could be.
    Thanks in advance
    Regds
    Priyya

    Hi,
    Take a copy of template 0ANALYZER, it will have all the components which have the web analyzer.
    Check the below link for the same:
    http://help.sap.com/saphelp_nw04/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
    Hope this helps........
    Rgs,
    Ravikanth

  • Difference between web reports created in WAD & Visual Composer

    Hi All,
    Can anyone tell me
    1.The Difference between web reports created in WAD & Visual Composer.
    2.The Webreports created in Visual Composer is availble for normal users(users not having Visual composer).
    3.how to create web reports & Publish using Visual composer.
    Waiting for results.
    ThanKs in Advance,
    Basava Raju

    hi james..
    Check these.
    WAD: http://help.sap.com/saphelp_nw2004s/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
    VC: http://help.sap.com/saphelp_nw2004s/helpdata/en/42/c2ba7f545e3116e10000000a1553f7/frameset.htm
    Visual Composer is a model-driven development tool that allows business experts to create and adapt analytical and free-styled applications without writing code. Visual Composer 7.0 is the General Availability (GA) release; Visual Composer 6.0 introduced the freestyle model-to-code creation of analytical appli- cations and it was intended as a preview tool for evaluation purposes.
    Visual Composer now connects to SAP NetWeaver BI via a Remote Function Call (RFC) rather than a Web service connection. The resulting communication between the portal and SAP NetWeaver BI works faster, especially in cases of large query results. With these added functionalities, users can create more user-friendly, powerful analytical applications using Visual Composer, such as Executive Dashboards.
    Visual Composers Features -
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9326072e-0c01-0010-bc97-f72e93338101
    New Features of Visual Composer 7.0
    Visual Composer 7.0 is part of SAP NetWeaver Portal in SAP NetWeaver 2004s. This release focuses on SAP Analytics and offers significant changes from the previous Visual Composer release. The most notable changes include:
    Visual Composer now runs on the Java 2 Platform, Enterprise Edition (J2EE) Engine of SAP NetWeaver Application Server (SAP NetWeaver AS). Therefore, you no longer need Internet Information Services (IIS) 5, Microsoft SQL Server 2000, and Microsoft .NET Framework.
    Visual Composer now can generate iViews for Web Dynpro (the SAP NetWeaver programming model for user interfaces) and Adobe Flash Player 8 or higher in SAP NetWeaver Portal. You can create Internet applications by integrating Adobe Flex Server and Web Dynpro.
    Visual Composer now integrates BI content from SAP or non-SAP systems using BI Java Connectors (part of BI Universal Data Integration 7.0).
    /message/3240694#3240694 [original link is broken]
    /message/2958672#2958672 [original link is broken]
    These are the links which i followed.
    https://www.sdn.sap.com/irj/sdn/visualcomposer
    http://www.sap.com/platform/netweaver/components/visualcomposer/index.epx
    http://help.sap.com/content/documentation/netweaver/docu_nw_vc.htm
    VC - Install and Configure guide
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1d55042e-0c01-0010-e3a3-b009c445ee23
    Preparing to Use Visual Composer
    http://help.sap.com/saphelp_nw04s/helpdata/en/44/429c8b709914bce10000000a155369/content.htm
    hope it helps..

  • How to Integrate BIW WAD with EP6.0

    Hello Everybody,
    I need to design and deploy BW applications using WAD and so need to integrate BIW System, Portal and WAD. Is there any suitable documentation which explains all the steps required for such an integration b/w Portal and BIW System and WAD. A quick reply is highly appreciated and well rewarded.
    Thanks in advance,
    Regards,
    Sarabjeet.

    The support to include NetWeaver 2004s based BEx Web Applications Java is now available in NetWeaver 2004 EP 6.0 from SPS15 onwards. Here is the relevant information on how to use the feature:
    •     SP15: <a href="https://websmp106.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=DISPL_TXT&_NNUM=940773">Note 940773</a>
    •     SP16: <a href="https://notescsr.wdf.sap.corp/~form/handler?_APP=01100107900000000342&_EVENT=DISPL_TXT&_NNUM=0000941017">note 941017</a>
    •     SP17: already included in standard shipment
      Cheers
        SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Maybe you are looking for