WAD how to assign data to axis

hi ,
i have created a query in WAD 3.5. i have data in fivefeilds . in the tempalte i have assigned 4 graphs .ie protfoilo charts . i want to compare feilds 1st feild with 3rd. 3rd with 5th . 5th with 1st like this. i am not able to assign the data to the assign the data to xaxix and y axis. where should i go and how should i assign the data to xaxix and y axis. can i use four graphs on one report. thnaks for ur replay .

To only display ceratin fields in a chart, the query result has to be filtered. Filters are set on the DataProvider. So you cannot use the same DataProvider for each chart. U could define a couple of views on that report and set the view as DataProvider.
Regards,
Beat Stoller

Similar Messages

How to assign Date Rules to Duration Types?

Hi gurus,
can someone kindly point where in Customizing do I assign a newly created Date Rule for a custom Duration Type? I created a new Date Rule to calculate the duration between two Date Types, but as I was creating my Date Profile i couldn't see any configuration to assign Date Rules to Duration types (in contrast, you can directly specify which date rules to use per Date type).
Regards,
Marc

Dear Experts,
Can any one let me know in inicident management process in sap crm 7.02 EHP2.
I do not see any entry in the first response by and due date by fields
please advise.
1.I am populating the SLA based on categorizations, in cat schema I have assigned the service product which has the service profile and the response profile.
2.please also let me know availabilty times should only be set for service provide BP or it should be for sold to party and the requester BP as well.
3.also once I enter the requestor the customer (sold to party) entry pops up but the system also suggest the requestor as well as sold to party... please let me know where am I wrong.
4. I have not touched the middleware part, however I see an error" document is being distributed changes cannot be possible" when I try to edit any incident, RFC or Knowledge article.. please guide me some steps to fix this.
5.what are the replication objects I need to consider if ineed to integrate the HR and FICO with SAP CRM.
from HR I need org structure and Employee master .
From FICO : ASsets please advise.
Appreciate if any one could answers these quieries.... thanks in advance.

How to assign date value in the report

Hi,
I want to compared between two dates. One date is dynamic and other one is fixed.
for example Date1 = today's date
Date2 = 12/31/9999
How do i fix the date2 in the report.
Please any one help me
Thanks & Regards
Jagannadha Raju

you can use default values in the properties of the date variable that will allow it to be the data yo uwant it to be
the 2nd date which is current use sap provided variable current data on it as restrickted value( Not default).
hope that helps

How to Assign a Constant Value to a Dim. Member when pulling Master Data?

BPC Gurus:
I am trying load Vendor and Customer Master data into BPC dimension. My Dimesnion has memebrs: ID, EVDESCRIPTION, PARENTH1, TYPE. I have successfully pulled the ID and the description from 0CUSTOMER and 0VENDOR. However, I
need to have a ttext value for 'PARENTH1' and 'TYPE'. For Customers, I want to add a FIXED value "'CUSTOMER' for every
Customer ID pulled in and also for "TYPE", I want a value of "CUSTOMER". When I maintainthe Dimension, I want to see
th followingvalues:
ID                          EVDESCRIPTION                                   PARENTH1                         TYPE
0000000001         WALMART                                            CUSTOMER                        CUSTOMER
0000000002          TARGET                                               CUSTOMER                        CUSTOMER
and so ON
Since we have Vendor Numbers in the same Diemsnion, when I pull Vendors, I need to have similar values as:
ID                          EVDESCRIPTION                                   PARENTH1                         TYPE
0000005050         ABC Supply Inc.                                   VENDOR                            VENDOR
0000005051         BASF                                                    VENDOR                            VEDOR
and so ON
How can assign a Fixed value to the member Propert? Can I achieve it in Conversion file....?
( My atempts failed...).
Any suggestion recommendation would be gretaly appreciated.
Munna.

Hi,
For adding fixed values to the properties, you can use the transformation file. In the mapping section, you can specify a constant value. This value will be written to properties of all the members while importing master data. However, for parenth, its a bit different. First thing is that, you need to have a member called CUSTOMER, then only you can have CUSTOMER in the parenth column. Even if you add it and use the mapping section for this purpose, then it will write CUSTOMER to parenth for all the members (even to CUSTOMER member). And this will be wrong. So, you will need to write it manually.
Hope you got the idea.

How can use the active x excel to change the assigned data/number in my VI?

I have an assigned data in my vi using build array and insert into array. i can change the data in excel,
but i can't change the data in array, How can I connect/communicate/control the data in aray using active x excel.
(i know this is complicated that's why i'm trying to get helped)
(please lend me a simple example)
Thank You very much.

The one I pointed you to before was a bad example. Try the one here. The example returns the cell value as a string but that's easy enough to change. You can also modify it to return a range of cells to create a LabVIEW array. You can also search NI Dev Zone for other examples by going here and you can also search this forum for Excel examples.

For a function module how can I find its assigned data source name?

Hi BW Gurus,
If i know the data source name then the assigned fn. module/Table/Infoset I could find from RSO2. But for function module How do I know its assigned data source name?
Thanks a lot for the response.
Regards
Ven

Hi Ram,
In SE16, enter the table name as ROOSOURCE and in contents choose field EXTRACTOR for selection and enter the name of the function module.
It will return the list of datasources where the function module has been used.
Best Regards,
Ankit Agrawal

How to know the Buyer Requisition Assign Date

Dear All,
I am still new in this Purchasing Module and need help to know How I can find the Buyer's Requisition [Assign Date] and [Who Assign] it?
Take in mind the Buyer complains about the delay time to see the Requisition in the Auto Create Pool although it is Approved earlier before more than two months.
Please anybody can help me I will be Appreciated.

A requisition shows up in buyer's workbench as soon as it is approved provided the buyer name on the req is filled in.
There is no time delay.
Hope this answers your question
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant
513-325-9026

To know how to find the Creation date, Assignement date and Activation date

Hi All,
    Can you please guide me to find the answer for the below mentioned questions:
Apart from Change log ,
1, Creation date
     May I know is there any approach to find the Creation date of a particular Pricing condition type.
2. Assignment date -
    How to find the assignment date of a particular condition type to a pricing procedure.
3. Activation Date -
    May I know is there any to find out the date of Activation for the Customer hiearchy in T code VDH1N
Presently I'm working on SAP ECC 6.0For the above question I tried T codes and table but I'm not able to find out exactly. Even in Change logs I'm not able to get it.
Can you please guide me where I'm missing.
Thanks in Advance
Thanks & Regards,
Pugal

Hi,
Something like this
select table_name, created from user_objects where object_type = 'TABLE'Regards
Anurag Tibrewal
Oops: I did not see the requirement correctly. If auditing is not the option for you then logminer (if archive is present) else no other option i can think of.
Edited by: Anurag Tibrewal on Oct 6, 2009 8:37 PM

How to assign a button for attachment and send the data through browser ?

Hi friends,
How to convert to browser ?
how to assign a button for attachment and send the data through browser ?
Thanking you.
Regards
Subash.

Refer to
How to create a text box in ascreen painter?
where another user (venkateshwar reddy) has asked a very similar question...
Jonathan

Ex_me_process_req_cust~process_header: How to Get Acct Assignment Data

I've created a custom class to use this BADI interface. Inside this process_header method I get the Purchase Requisition's item data, I now need to read the Purchase Requisition's account data, particularly the GL Account Number, and then change it. See below. Any feedback will help.
Thank-You.
METHOD IF_EX_ME_PROCESS_REQ_CUST~PROCESS_HEADER.
DATA: LT_ITEMS TYPE MMPUR_REQUISITION_ITEMS.
DATA: LS_ITEM TYPE MEREQ_ITEM.
FIELD-SYMBOLS: <FS_ITEM> TYPE LINE OF MMPUR_REQUISITION_ITEMS.
CALL METHOD IM_HEADER->GET_ITEMS
    RECEIVING
      RE_ITEMS = LT_ITEMS.
LOOP AT LT_ITEMS ASSIGNING <FS_ITEM>.
    LS_ITEM = <FS_ITEM>-ITEM->GET_DATA( ).
ENDLOOP.
*Get/Read the Purchase Requisition Line Item Account Assignment Data Here
*Change the Purchase Requisition Line Item GL Account (SET?)
ENDMETHOD.

The line that is commented out gets a syntax error...expecting a field or function? Is it looking for an interface name to be called out subsequent to get_exkn? I guess I can then do set_exkn once this compiles Thank-You.
METHOD IF_EX_ME_PROCESS_REQ_CUST~PROCESS_HEADER.
DATA: LT_ITEMS TYPE MMPUR_REQUISITION_ITEMS.
DATA: LS_ITEM TYPE MEREQ_ITEM.
DATA: LT_ACCT TYPE MMPUR_ACCOUNTING_LIST.
DATA: LS_ACCT TYPE MMPUR_ACCOUNTING_LIST.
FIELD-SYMBOLS: <FS_ITEM> TYPE LINE OF MMPUR_REQUISITION_ITEMS.
FIELD-SYMBOLS: <FS_ACCT> TYPE LINE OF MMPUR_ACCOUNTING_LIST.
CALL METHOD IM_HEADER->GET_ITEMS
    RECEIVING
      RE_ITEMS = LT_ITEMS.
LOOP AT LT_ITEMS ASSIGNING <FS_ITEM>.
    LS_ITEM = <FS_ITEM>-ITEM->GET_DATA( ).
    LT_ACCT = <FS_ITEM>-ITEM->IF_ACCT_CONTAINER_MM~GET_ITEMS( ).
    LOOP AT LT_ACCT ASSIGNING <FS_ACCT>.
*      LS_ACT = <FS_ACCT>->GET_exkn( ).
    ENDLOOP.
ENDLOOP.
ENDMETHOD.
Edited by: Tom Matys on Dec 6, 2011 9:22 PM

How to populate data in PAY_PEOPLE_GROUPS table (People Group Flexfiled)

Hello
We are migrating the data from one oracle instance to another oracle instance which are in same version of Oralce Applications 11.5.10.2. As a part of migration can anybody let me know how to populate data in "People Group Key Flexfiled" (PAY_PEOPLE_GROUPS table), ideally I will create or update employee records from the source instance to destination instance, so while creating or updating the employee records in can pass people_group_id while calling to the assignment api but my question here is before passing group id to the api i should have the data populated in PAY_PEOPLE_GROUPS TABLE so that i can fetch the group id as per the combination and pass it in to the api.. please suggest...

Thanks for your information! by any chance do you have any sample code which will create/update assignments with People Group Flexfield; when i check "hr_assignment_api.update_emp_asg_criteria" it only has parameter to pass people group id and not having segments parameters to pass individual segments.
Also let me know the links if you have any for all HR API guide which will help me to develope the interfaces...
My requirement is we have two instances in which in one instance we are treating as source for HR which will be used to master for all HR related activities and we are planning to develope an interface which will bring master instance in sync with dummy instance.

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

How to assigne multiple value in key of read table

Hi gurus,
I want read table xxxx with key field1 = ' xxx' or field1 = 'yyy'.
how to assign multiple value as key for the same field while reading internal table.
Regards
sagar

Hi ,
You can loop the internal table like
loop at <table xxxx> where field1 = ' xxx' or field1 = 'yyy'
or you can write two read statements to read the internal table in wrk area.
read table <table xxxx> with key field1 = ' xxx'.
if sy-subrc <>0
read table <table xxxx> with key field1 = 'yyy'.
if sy-subrc = 0
endif.
else.
do your data processing.
endif.
Thans.

How to Assign a Field value to a Variable??

Dear All,
Kindly let me know, if <b>"HOW TO ASSIGN A FIELD VALUE TO A VARIABLE????"</b>
Situation is, we have a Field (OBJK-TASER) in which 2 tables (SER01 & SER03) are stored. And we want to access names of the Tables which are there in the field(TASER) in (OBJK) table to a variable and then passing that variable to the sql query as a table name to get data accessed dynamicaly.

try this
select TASER from OBJK into table it_table.
loop at it_table.
select field1 field2 from (it_table-table) into table it_fields.
endloop

WAD how to assign data to axis

Similar Messages

Maybe you are looking for