WAD - Is it possible to launch the web report in a different browser

Hi...
I am using a command button to launch a report in the web browser. My question is... Is it possible to have the command button in one browser and the report to be launched in a new browser?
Any suggestions...
Thanks

From the TS Help:
TestStand Sequence Analyzer Application
Select Start»All Programs»National Instruments»TestStand»Tools»TestStand Analyzer or run <TestStand>\Bin\AnalyzerApp.exe to launch the stand-alone TestStand Sequence Analyzer application. Use this application to analyze projects outside of the TestStand Sequence Editor.
The sequence analyzer application window contains the following tabs:
Files—The files and directories to analyze.
Rules—The rules to use for analysis. Use this tab to enable, disable, and configure rules for analysis in the current project.
Options—Contains the project options that control the analysis and determine whether the sequence editor automatically saves the current analyzer project.
Messages—Contains the list of messages for the most recent analysis of the current project, sequence file, or workspace file. The sequence analyzer overwrites the content of the Messages tab each time you start an analysis session.
Analysis Summary—Contains a summary of the most recent analysis of the project.
Command-Line Usage
You can use the following command-line syntax to open an analyzer project:
AnalyzerApp.exe "C:\My Documents\MyProject.tsaproj"
CTA, CLA, MTFBWY

Similar Messages

Can't Launch the Web Report From Reports Builder

Hi All: I just installed Oracle Reports 10g. I've used the product a lot an have never had a problem. This time when I press the "Run Web Layout" button, Reports works for several seconds and stops. THe Web page is not displayed in the Browser.
If uninstalled Reports Builder and reinstalled. I'm at a loss as to what to look for.
Any thoughts would be appreciated?
John

I'm in exactly the same position.
Normally I just do some work, hit Ctrl+R to run it and get my output.
Now it just sits there for a while, and then the web browser trys to go to this address :
C:\Documents and Settings\hilliers\Local Settings\Temp\docroot\test report07602672.htm
which is a blank page.
I thought it was meant to run a reports servlet, but that could be just my memory.
However - I've noticed that in this report, there is no + next to Web Source in the object navigator, which I think means there is no web layout. So the report actually is running, but has no output.
Thats my guess anyway.

Is it possible to launch the SequenceAnalyzer from a C# code module in a Custom TestStand Editor

The Sequence Analyzer is not available in the Custom TestStand Editor Mode GUI.
Is it possible to add the Sequence Analyzer to a menu in the custom TestStand Editor?
Is it possible to launch the sequence analyzer from a C# code module, this method is then called from a sequence call back.
Best regards
Patrick

From the TS Help:
TestStand Sequence Analyzer Application
Select Start»All Programs»National Instruments»TestStand»Tools»TestStand Analyzer or run <TestStand>\Bin\AnalyzerApp.exe to launch the stand-alone TestStand Sequence Analyzer application. Use this application to analyze projects outside of the TestStand Sequence Editor.
The sequence analyzer application window contains the following tabs:
Files—The files and directories to analyze.
Rules—The rules to use for analysis. Use this tab to enable, disable, and configure rules for analysis in the current project.
Options—Contains the project options that control the analysis and determine whether the sequence editor automatically saves the current analyzer project.
Messages—Contains the list of messages for the most recent analysis of the current project, sequence file, or workspace file. The sequence analyzer overwrites the content of the Messages tab each time you start an analysis session.
Analysis Summary—Contains a summary of the most recent analysis of the project.
Command-Line Usage
You can use the following command-line syntax to open an analyzer project:
AnalyzerApp.exe "C:\My Documents\MyProject.tsaproj"
CTA, CLA, MTFBWY

Filters and Conditons on the web report

Hello SDN,
I am working on the WAD and want to display the filters and conditions, if any, in the web report. I also want to display the selection criteria which we used on the variable screen to run the report. What is the web item used to display all these? What are the settings I need to do?
Please reply me soon...It is very urgent!!!
Thanks,
RPK.

Hi RPK,
As I mentioned in my previous post: If you put in any entry in the list of text elements, it overrides the normal setting for displaying either all generic text elements, or all filters or all variables.
As I understand, your requirement is to:
1) Display all the variables and filters on the query
2) display some of the generic text elements
Getting these two together on a single text element item is not possible as far as I know. So either you display all the generic text elements as well or else you use two different text element items.
On the first one put in individual entries for whatever generic text elements you want displayed and uncheck all other options, in the second one simple select the two checkboxes to display filter values and variable values.
Hope it helps,
Thanks & regards,
Nikhil

Is it possible to schedule a Webi report based on another input, i.e. expose a time in which a process was finished.

These are Webi, user created reports.
Is it possible to schedule a Webi report based on another input, i.e. expose a time in which a process was finished (this can be obtained via a SQL call, service call, etc).
The issue is that if a user schedules a report for 9PM but a process to move data, etc has not completed then that forces the user to keep re-freshing the report hoping that the process has been complete.
Ideally, in the selection UI add to the dropdown for 'when' the option 'Use Process X completion Time' (since it is a daily report).
Then starting around 9PM check to see if that 'time" value is populated then refresh (run) the report. Or it could just be a flag that the process has finished.
User's in the webi environment are asking for this, and moving their reprots to BO is not an option. That's why they have the custom webi enviroment.
Thank you.

There is no very good way to create a working event based on a file as the file will need to be deleted as soon as the event is triggered. However there are work around which can be done for this. Here is a link which is discussing about the process.. http://scn.sap.com/thread/1677109
Once you have created a file based even in CMC > Events> System Events and made a work around program to delete the file once the event is trigged all you would need to do in webi is in launchpad just schedule > Events > select the file based event from all available system events. Here is a screenshot how to make a report run based on a event..

How to Generate the web reporting ?

Hi Friends,
Can you send the web reporting doc for me please.
iam also new to web reporting and i dont know
1. How to start the generation of web reports?
2. what are the elements required to do this?
3. And how to see the results of this report?
4.Is there any special cofiguration require to do this?
And i know some elements require to do web reporting.
such as WAD,Query Template,WAS.what is relation between this i dont know. i did a lot R&D on this web reporting, but i cont get the idea of this.
my system have followings,
i have WAD, Enterprise Portal, BEx. pls tell me is enough to do web report or any thing still require.
pls send me or tell me how do step by step, first what i need to do,second what i need to do......?
pls send docs to [email protected]
thanks in advance.
bye
hari

hi
check these links,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ec20a990-0201-0010-f291-d1d039975e41
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a249a990-0201-0010-e18e-b2f5ed135497
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bc4fa990-0201-0010-588e-ca4e63050d6d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b931a890-0201-0010-268d-a7bedf8aa720
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f0aca990-0201-0010-0380-f3aac4127a57
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3541a990-0201-0010-f1ae-b24b72690df7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2642ab90-0201-0010-9193-d59de66cbab4
regards,
Manoseelan

Not able to view the web report..

hi,
I have sap bw 3.0b and WAD installed. I am able to create a report in WAD and when i try to generate the web report, IE opens with an url starting as http://xxx.yyy.....
If my understanding is correct to view these WAD reports in my workstation I need to have Apache running so that the http://.... URL is resolved as appropriate.
If yes, then I need to know how to configure Apache , the port number etc.
If my understanding is not correct please let me know how i can view my report in the browser at my workstation.
thanks a lot. Awaiting ur help.

In start up menu click on Run.
write "drivers". it'll open the "C:\WINDOWS\system32\drivers" folder in new window.
Go to etc folder in that you'll find "hosts" file open it in notepad.
There maintain an entry for the server ip & hostname (system name) seperated by tab.
Example on "how to maintain the entry" is also provided in hosts file.

Changing values in the web report

Hi All,
For ex. I have the following scenario.
I have a web report in which I have a table item which is displaying the query result. The user wants to have a facility to change the Key Figs, if they want, directly on the report, it means when the user runs the web report and if he says something to be changed, he will directly change the value on the report and will click something like a button to save the changed value back in the infoprovider.
Is this something possible?I came to know that we can do this sort of things using BSP but I am not sure how to make the table item to accept some changes and how to link to a BSP Program.
Could some one please help me in this..
Best Regards,
Nene.

Nene,
If you want to know if it is possible , here's how...
1. Use a BPS layout ...
2. Create a BSP layout for the same
option 2 :
Create a BSP page which has a textbox for accepting the value and a submit button.
On clicking the submit button , based on the parameters selected by the user , update the ODS. Remember you cannot update the cube because it does not have overwrite capability. However , declare the cube as an export datasource and then call the function module for the data source and push in the data for the same inside the BSP page.
Hope this helps..
Arun
Assign points if useful
Message was edited by: Arun Varadarajan

HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
killall SystemUIServer
You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

Error While Run the WebI Report on SAP BW Query

Hi
I have build the universe on SAP BW Query . I built the same universe on the SAP BW DEV and SAP BW Test
When I tried to run the WEBI Report on the Universe which is built on the SAP BW Test
WebI Report is prompting for the below values
Calendar Year
Profit Center
Profit Center Hierarchy
Version.
Here I can see the List of values for the Calendar Year and Profit Center. Its giving me below error when I look for list of values for the Profit Center and Profit Center Hierarchy.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions:
1.     Why I am getting this error. Because of authentication or configurations set on the Profit Center and Profit Center Hierarchy objects? If so , please let me know what I need to set?
When I tried to run the same WEBI Report on universe which build on SAP BW Dev Query. I can see list of values for the Calendar Year, Version, Profit Center, Profit Center Hierarchy.
But when I selected the values and tried to run the report. I got below error.
u2018Query 1 - P&L Structure Monthly_Devtst
Database error: [SOFA Driver] : The MDX query SELECT NON EMPTY HIERARCHIZE( {[Measures].[4CEX5LZ5571LCZHJBK0L0360P],[Measures].[4CEX5MM6Q2UPWV3VT27LU9261]} ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON COLUMNS , NON EMPTY HIERARCHIZE( { [0CALMONTH].[LEVEL00].MEMBERS } ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON ROWS FROM [ZFIGLPCBM/ZZFIGLPCBM04_Q011] SAP VARIABLES [!V000001] INCLUDING =[0PROFIT_CTR                   1000HCICONS08] [!V000002] INCLUDING =2 [!V000003] INCLUDING =2008 [!V000004] INCLUDING =000 failed to execute with the error Value "0000000002" for variable "Profit Center" is invalid. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions :
1.     What is this error? Please suggest the solution to run the report successfully.
Also I am attaching Print Screens of DEV and Test reports Prompts and Errors.
Here I am using Business Objects XI R2 SP4
I am sorry if I confused you with elaborated explanation, I have very less knowledge of BO and SAP BW ..
Please help me with your valuable suggestions.
Thanks,
Anitha

Hi Ingo,
- the BI Query in the Test system is running correct and all the variables do work ?
     Yes, BI Query is working fine in the Test System and I can see all the variables too
In BI Query I can see values for Calendar Year, Version, Profit Center, Profit Center Hierarchy
- the Universe has all the variables ?
Yes, Universe has all the variables.
- do you see values in the Web Intelligence prompts when you run the report ?
   No,
   I can only see values for the Calendar Year & Version in the Web Intelligence Prompt.
When I try to see values for the Profit Center & Profit Center Hierarchy in the Web Intelligence Prompt, its showing below error.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
I can send you the Print Screens of Prompts & Errors, but i don't know how to attach the file here.
Thanks,
Anitha

How to change the folder name in the web report.

hi experts,
can anybody give me the solution, how to change the folder name in the web report. any help is appreciated.
waiting for ur favourable response.
thanks
suri

Hi Tony,
Yes, the business requires, only to change in the webreport only not in bex and roles. any suggestions will be helpful to me.
thanks
surendra

Error (IES10901) (WIS 10901) while refreshing the Webi report

Hi Gurus,
We have created webi reports using Universe design tool on top of BEX Query based on 0SD_C03 cube and now we are facing Database error: A runtime exception has occured. (Error loading cube 0sd_c03 (catalog : % 3). (IES 10901 ) (WIS 10901) while trying to refresh the Webi report from Data Access--> Edit--> Run Query while its running fine when I refresh the report using refresh button option in Webi.
When I run the the query in rsrt its working absolutely fine.
Note that we are using BOBJ 4.0 SP7 and this issue has come recently.
Any idea or help on this would be appreciated.
Regards,
Monil

Hello Monali,
are you getting this error constantly or sometimes?
what type of connection are you using for your Webi report
Is it Specified user name/password OLAP connection or SSO Olap connection
If your are using Specified user name/password OLAP then try with SSO connection because SAp recommendation is not to use Specified user name/password OLAP connections..to resolve this kind of issues please restart DSL bridge..
Regards,
Naveen D

Reg: Error while refreshing the WebI Report

Hi all,
I created WebI report based on universe that is connected to Excel data. Through DSN I m accesing Excel Data . I created same DSN in server also. If I refresh the webI Report in BO server it tells the following error.
A database error occured. The database error text is: [Microsoft][ODBC Excel Driver] System resource exceeded.. (WIS 10901)
Before that its working fine. what may be the problem?
Regards,
Hemalatha J

This seems to be a data source not a BO problem. Take a look here:
http://social.msdn.microsoft.com/Forums/en-US/sqldataaccess/thread/05aaccd6-2a38-4784-b310-99e34b8d1a35
Regards,
STratos

Error getting,while generating the Webi report

hi,
while i am generatign the Webi report, i am getting below error.
com.jpmorgan.extraclear.reportservice.BOException: :generateReport :: Exception com.businessobjects.rebean.wi.ServerException: The number of simultaneous report jobs was limited to 10 by the system administrator. . Please try to reconnect later.[ RCIRAS0518 ]
please help me out.

I just got the same error message, but I try to open a DeskI in InfoView. This has nothing to do with the Web Intelligence Processing Server. But I had problems with the RAS (Report Application Server). A restart of the RAS didn´t help, so I restarted the BOXI-Server. Now everything is fine, but I still don´t know, what happens.
It would be great to know what the problem was.
Hope to get an answer.
Martin

How to disable the reminding dialog when close the webi report viewer

Dear all
How to disable the reminding dialog when close the webi report viewer
Background
When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
But customer need to disable this dialog, and can clost the report viewer directly.
So is there any ways to modify this?
I think it shoule modify some .js file under tomcat, but can not find the solution.
Thanks a lot, any information woulde be appreciated.
David Zhang

I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it.

WAD - Is it possible to launch the web report in a different browser

Similar Messages

Maybe you are looking for