WAD jump to query (RSBBS)

Hi Gurus,
I have one report in WAD and I want to create a jump to an specific query.
my report presents 10 KPI's and I want to know, can I use de context menu in one specific KPI1 that guide me to the QUERY1, and if I use the context menu in the KPI3 that guide me through QUERY3?
If i associate in tcode RSBBS 10 queries to my report in WAD, my context menu will always show these 10 queries?
Thanks in advance,
Oswaldo

Hello,
The jump from one query to another query is not possible for a single KPI. The jump applies to all cells in source query. Its not specific for a particular key figure.
Hope that helps.

Similar Messages

  • Jump through query - It uses ALEREMOTE user instead of current user

    Hi,
    When I do the query in BW using TCODE-rsbbs, select source system, i can jump using query through Bex to ECC system the issue is:
    --It logon using the ALEREMOTE user is there any way to make it to use the current logon user?
    Thanks in advance

    Suman\Madhavi
    Thanks for your suggestions.
    I am using a user with SAP_ALL but still same issue, it is taking the user specified in RFC connection instead of using the current user.
    I created a new logical system and RFC connection with option use 'current user' and tried to create a new source system so that I can use it for RRI jumps but it failed with error: name <logical systemname> of client <client#> is not same as the name <new logical system name> of the warehouse.
    Please let me know if have any suggestions.
    Thanks

  • Query on Cube jumps to Query on ODS ; Query on ODS takes Long time

    Hi All,
    Perormance Issue:  Query on Cube jumps to Query on ODS.
    Query on ODS taking long time.(JumpQuery)  
    Specific to ODS Query: When i have checked the Query on ODS(individually) also taking longer time
    Actually ODS contains quite huge data. Indexes already maintained.
    I have checked the RSRT- Execute SQL and Debug Option also. Indexes maintained Perfectly .
    Order of objects in ODS indexes are matching the order of Objects in SQL stat of RSRT Trans. Inspite of that taking long time.
    I have checked both the ways jumpquery aswellas individually .
    My question is when the query is jumping from cube to query on ODS how to check the performance, how the query is executing in background when switching over to the second query, Moreover calculated keyfigure has been used for jumping to the target query.
    How can query(ods query)  time is optimized or improve performance when jumping  from query on Cube ?
    can any body help?
    Rgds,
    C.V.
    Message was edited by:
            C.V. P

    What i understand is that you need to optimise the Query jumping time . But this will be very less compared to the time taken by the query on the ODS.
    Ideally you shouldnt be making a BEx Query on the ODS , as this takes a long time. What you can do is try executing the Bex Query on the ODS to find out as to where the issue lies. If this query is taking a long time , there is not muich that you can do here.

  • Advantages of using Bex WAD over Bex Query Designer?

    Can anyone tell me the advantages of using Bex WAD over Bex Query Designer?

    Hi Shiva,
    WAD has many advantages when compared with Query Designer. few of those are
    You can include Radio Buttons, Push Buttons, Check Boxs.....
    You can include more than one report in one WAD Report
    Completely u can make fancy as much as requried ....
    Many graphs  and chars are can be included .....
    data from Views can be viewed
    Many..many....

  • Problem with jump query - RSBBS

    Hi Gurus,
    I have a main query - called the 'Manager Hierarchy'. For this, I have maintained two jump queries namely - 'Job Changes' and 'Pay Rate Changes'.
    In my queries 'Job Changes' and 'Pay Rate Changes', I have maintained two variables - 'employee' and 'calendar year'. If I individually run these two, it runs fine. But when I include these two as jump queries for the Manager Hierarchy one, the execution stops with the following messages:
    Warning: Invalid filter on 0EMPLOYEE: Filter changed
    Warning: Invalid filter on 0CALYEAR: Filter changed
    Diagnosis:
    you tried to filter on a characteristic with active presentation hierarchy by a node of another hierarchy.
    This can only be done by switching the hierarchy or for example by using the report/report interface.
    System Response:
    The filter is not evaluated for the characteristic, but removed instead.
    Can anyone please let me know the possible remedies after going through the log ?
    Full points will be assigned.
    Regards,
    Srinivas

    Hi Shrinivas
    Try to put employee and calyear in the row of Manager Hierarchy query and check whether it works or not.
    If yes then put calyear in the row and make it as Non display then check it works or not.
    or make both the variables ie employee and calyear as optional in 'job Changes' and 'Pay Rate Changes' query
    Regards
    Rohit
    Edited by: Rohit Deshmukh on May 29, 2008 2:55 PM

  • Jump from query

    HI Gurus,
        I have to develope a query where i have to jump from BI query to ECC. In my report There are two fields one is account and another is account number. If i click on the document number i have to go to an ECC transaction diplaying data about that document and if i click on the account i have to go to another ECC transaction displaying data about account. I know that we can jump from BI query to transaction, but is it possible to jump from one query to 2 different transaction? if so how to do it?
    Regards,
    Raghavendra.

    Hi Raghavendra,
    In the RSBBS t-code, give the sendor reprot name then click on create button.
    Then select transaction and sourcesystem and then the T-code you need to enter.
    Then after save the setting. goto Assignment details. Click on the field for which you need to assign that transcation.
    Then create another one and select transaction .. provide the details as above and in assignment provide the details.
    Ex: for G/l account you can assign the FS03n T-code on r/3.
    for cost center you can assign the KS03 t-code on r/3.
    Hope it helps...
    Regards,
    Ravi Kanth

  • Replacing a Cell ( Entry) as ZERO - Characteristics in WAD View or Query le

    Hi,
    please let me know the following Requirement in a WAD View
    I want to filter a Master data entry ( Characteristic)
    Characteristc ( Created By)
         RAO
         RAMA
         SSR
         KRSNA
         AJAY
         RAO
         RAMA
         SSR
    I had a column shown above., i need to show a particular entry example RAO by using ZERO ( 0)., please let meknow how to do it in WAD level of BEx Query level.,
    Thanks!
    Rao S
    Edited by: Seelam  Rao on Nov 10, 2008 6:27 AM

    Michael,
    I am not sure if you can have icons outside the query that can be controlled by the query values. You could do one thing ...
    1. have a query with an extra Key figure.
    2. Have your validation formulae on this key figure and have an exception on the same
    3. Now your exception column would have three colors.
    4. Now execute the report in IE and go to view source.
    5. Look for the stylesheet classes for the exceptions , they would be something like SAPBexGood1... etc
    6. Go to the table interface ( I assume that you would have figured out how to inherit the class and modify the same from the how to paper...)
    7. Go to c_cell_data
    8. if cell_style="SAPBeXGood1" then replace c_cell_content with <img src="/sap/bw/mime/icons/icon1.gif" /img>
    9. Go to the css and find out your stylesheet class.
    10. Remove the background color attribute from the required style.
    for checking through JavaScript.
    1. The query should have a separate stylesheet class attached to it.
    2. It should have one cell only
    3. You can replace the value by using style.innerHTML=whatever you want.
    Hope this helps...
    Arun
    Assign points if found helpful
    Message was edited by: Arun Varadarajan

  • Problem in WAD (The requested query / does not exist on the current server)

    Dear Guru's
    When i execute a Web Application in WAD in the selection screen suppose if i give Key product  as 86000 then check and execute i get correct data. Then if i come to  backpage (Selection screen again using backspace) and change Key product  as 86022  then check and execute then i get following error
    The requested query / does not exist on the current server
    System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
    Can any one please provide me some good solution...
    We are using BI 7.0 sp 16, But i am executing this Wed Application in 3.1WAD.
    Thanks and Regards,
    kalyan

    Dear Jai,
    Issue is in WAD selection screen for first product valuse every thing if fine, when i go back and change product value and then CHECK and EXECUTE the following error comes.
    The requested query / does not exist on the current server
    System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
    Any one have any idea plssssssssssssssssssssssssssssssssssss..........
    dude's some soln.....
    Thanks and Regards,
    Dev
    Edited by: Srinivas dev on Jul 4, 2008 2:45 PM

  • How to pass variable to jump to query !

    hello Experts !
    i have a query with variable "Month". so when i run that , user enters the Month/year and it gives the results for "Employee ID" for that month/year.
    i have also creted another query on dso, in order to get detail line item information abt " Employee ID" and join this query with the main one thru RRI.
    in RRI , i have selected "Employee ID" as single value field for both the query. the problem is when i do GOTO from the first query , it does work and gives me the result, but it gives records corresponds to that "Employee id"for all the months and year.
    How do i also pass "Month" - variable value along with that "Employee id" so that the second query only shows line item for that employee id for that selected month.
    thanx

    Hi,
    The use of jump query is to get the detailed level information, for the key figure values which appears in main query.
    This mainly happen when in your cube design you do not details information.
    For example:
    In your main query output you have :
    division , company code , variable amount
    Rec1)10, 1012,4000
    Rec2)20,1001,5000
    Now you want to know what are the document numbers involved to get the variable amount:
    So now , you jump query output will be for record no 1.
    Document number , variable amount
    100001,500
    100002,1000
    100003,2000
    100004,500
    So now you can see that jump query is giving you the documents numbers which are total of 4000.
    Once you have variable in main query , the jump will give details of those keyfigur values only.
    In case of jump query you need not to have any variable , it will automatically take from parant query.
    Though you can define varaible for jump also.
    I hope it clear your doubt
    Thanks
    Mayank

  • WAD problem with query variable sequence

    Hi Everyone,
    I have created 3 Queries of which all of them have common but different number of selection variables
    eg: query 1 : A, B,C,D,E
          Query 2: D
          Query 3: C
    I need to display the variables in WAD as displayed in Query 1.But they are displaying randomly.
    For this I arranged the variable sequence of Query 1 in the query designer using the menu path
    Query -> Properties and in the right panel select the "Variable sequence" tab
    But,it is still picking randomly.
    Is there any other option either in Query or WAD Designer?
    thanks,
    Taru

    try in this way
    keep variables only in query 1
    try if this will help

  • Authorization for User to Jump the Query

    Hi,
    The user1 (log is not generating for this user in RSSM) cannot use the jump target in the reports which have been placed under a role, whereas the other user2 (log is able to generate for this user in RSSM) is able to jump target in the reports in SAP BI.
    I need to give the proper authorization to user1 same like user2.
    How can I solve this issue.
    Thanks in advance.
    Regards,
    Ravi Sankar

    I dont understand what you mean with "(log is able to generate for this user in RSSM)"
    In RSSM you can create authorization objects....
    If you want to give some authorizations for  a specific query you must check the SU53 in order to see the objects that you need to add to the users profile.....
    The procedure is.......give th user the Query link in order to open the query....and obviously that action gives you an authorization error.....then enter to the SU53 and this transaction shows you the authorization object you need to add to the profile.....
    I hope this helps
    Regards

  • Publishing from WAD & publishing from Query

    Hi Experts,
    1.) I see two options avialable to publish to portal, query level and from WAD. could any one explain why or when do we use these options.
    2.)  If we add a new web item to the existing default template like 0analysis pattern ? what will be the next steps... should the new template be replaced and published, where should it be saved or replaced ?
    Please briefly enlighten me the flow from query ,WAD and finally to portal.
    Points will be assigned.
    Thanks
    Ganapathi.

    1. Publish from query -> Default tables and charts, Publish from WAD-> you can show lots of Web objects like Ticker, Tables, Charts....all items part of yor Web template( now Scripts , command wizards help to display the way you want)
    2.Add new to Standard template-> save as with your own name->Use your template in your Web templates

  • Use of Customer Exit - IP Wad Input ready Query

    Hi All,
    Can anyone confirm if we can use a customer exit variable(populates a SEQ number) be used in a input layout on IP>>WAD application.
    In my case it displays the seq number in the header area,but displays the "No rows or cols displayed because the axis not input readyu".
    We applied the note  SAP Note 1337901 - Query not ready for input if there is an empty results set;
    But had little luck;
    When I remove the exit variable it works fine as long it is drill-down in the rows;
    Any help would be apreciated.
    Thanks
    Rao

    My Exit variable works fine,and generates the sequence in WAD/BEX..
    The problem I have is when I include teh exit var on the query/filter of the agg lvl;
    The Wad screen displays the generated seq number in the header area, but turns the input grid  OFF.
    Thanks
    Rao

  • Bex query; RSBBS: GOTO ECC transaction

    Hello experts,
    i have been looking SDN and google this afternoon, but i cannot find my specific problem.
    My customer wants to start an ECC transaction from a Bex query.
    I created a 'transaction'  RSBBS variant and am testing to see how it works.
    From Bex analyzer i use the GOTO and i see an URL which seems logical to me.
    http://xxxx.nl:8002/sap/bc/gui/sap/its/webgui?sap-language=NL&sap-client=100&transaction=rsrr_web&okcode=ENTR&G_S_WEB-DEST=BWDCLNT100&G_S_WEB-HANDLE=3OK0Z1JJ597ZBBRJPKKJQSY6M
    it gives me an error that mandant, name or ww are not correct.
    I'm sure i was able to give the right values for these three, so my guess now is that something on the ECC system is not right.
    My customer doesn't use portal/web server functionality in ECC; i think that is my problem.
    Do you agree with this or can you give me a clue what to check for?
    And can you give me clue where to activate the web server functionality?

    Hi,
    Check your configuration in RSBBS. This looks simple but sometimes we miss..
    Have you selected correct source system with client and transaction code? Once these details are saved. Log into Bex Analyzer and check the option of Goto on that particular object. It will takes you source system transaction.
    Please check the below link for more details.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?QuickLink=index&overridelayout=true
    Hope it helps you.
    Thanks
    Riyez

  • Transaction Jump XD03 with RSBBS - No web page rendered.

    Hi Gang,
    I am trying to transaction jump to XD03 (display customer master) from a BW query. The IE browser flag waves, I get a "Done" message, but the web page is blank - white space.
    I have verified that the source R/3 system has its ITS functioning, the RFC and logical systems are defined, and the InfoSource and DataSource connected to the InfoProvider are active.
    Without an error message, it is hard to trouble shoot.
    Any ideas?
    Thanks,
    John Hawk

    Make sure the R/3 ITS name is maintained in the RSBBS_RSRR_URL or TWPURLSVR table.
    The OSS note 771351 gives details about the details for the configuration.
    Thanks.

Maybe you are looking for