WAD query results in JUNK

Hi Experts,
I am working on BW - 3.5. There is a problem with the reports in WAD. All the Queries which are available (old queries) are working fine in Internet Explorer and in Mozilla Firefox, but when i create a new Query in WAD or when i "save as" an OLD Query to new or make any changes to the existing Queries and execute then it is resulting in JUNK ... I am getting JUNK in Internet Explorer but the query is working fine in mozilla Firefox... i am not able to understand the problem here ...
I have deleted the cache of Internet Explorer, I have checked in IE-6, IE-7 and IE-8 also, I have logged out and logged in several times, I have restated the server too...
Appreciate your response.
Thanks,
Aravind.

Hi Nithin,
Patch level is 155.
below is the junk values... this is displayed on the whole pag.
਍格浴㹬਍u2020格慥㹤਍洼瑥瑨灴攭畱癩∽潣瑮湥⵴祴数u2022潣瑮湥㵴琢硥⽴瑨汭※档牡敳㵴湵捩摯u2265ാ u2020㰠楴汴㹥慖楲扡敬⁳湅牴㱹琯瑩敬ാ u2020㰠楬歮爠汥∽瑳汹獥敨瑥u2022牨晥∽猯灡戯⽷楍敭䈯硅匯祴敬桓敥獴䈯剗灥牯獴楟㙥挮獳㸢਍猼牣灩⁴祴数∽整瑸樯癡獡牣灩≴猠捲∽猯灡戯⽷楍敭䈯硅䨯癡卡牣灩⽴半坂䍟卟摴樮≳㰾猯牣灩㹴਍਍猼牣灩⁴祴数∽整瑸樯癡獡牣灩≴ാ㰊ⴡഭ瘊牡匠偁坂潌慣楴湯㴠搠捯浵湥⹴潬慣楴湯഻瘊牡匠偁坂桓牯䍴瑵慃慴潬⁧渽睥䄠牲祡⤨഻瘊牡匠偁坂瑉浥慃慴潬⁧渽睥䄠牲祡渨睥䄠牲祡渨睥䄠牲祡⴨ⰱ⤷測睥䄠牲祡 ⤩測睥䄠牲祡渨睥䄠牲祡⴨ⰱ⤱測睥䄠牲祡u2228䅎䥖䅇䥔乏䱂䍏彋∱測睥䄠牲祡u2228佂䭏䑅噟䱁䕕≓∬≑Ⱙ敮⁷牁慲⡹䈢剏䕄归呓䱙u2245∬佂䑒剅⤢測睥䄠牲祡u2228䅃呐佉≎∬慎楶慧楴湯䈠潬正∺Ⱙ敮⁷牁
~Aravind.

Similar Messages

Show blank texts instead of key or 'not assigned' in query-result

Hi,
is there a way / workaround to
1. suppress # / 'not assigned' in query results?
or
2. show blank texts (if maintained) instead of the key
(when showing texts for a characteristic in a query all characteristics with blank texts - none or ' ' -
will show the key instead of the blan text) ?
Thanks,
Christoph

Hi Christoph,
there have been several posts concerning this topic. As Saad told there is no direct way within SAP standard to reach this aim.
Depending on the Front-End Tools you are using these posts may help:
Not assigned and # in BEX 7.0 WAD
how to set field to blank if the data is # or unassigned
Brgds,
Marcel

Need QUERY result in Graph

Dear Experts,
I am having the following requirement.
Can it be possible to present the QUERY result in Graph ?
I read many thread in SDN, I found through APD/WAD we can do it . But I am confused.
But I am not getting any thread , How to proceed step by step ?
Kindly help..
Thanks,
Sethi

Hi,
If you are using Bex Query make as work book ,in that you can add charts and save as work book not as a query.
To insert the chart
Go to insert tab in the Excel(Work book) choose which chart you want in that.
After that go the chart which you have selected, right click and go to select data option, choose series for Entries and choose labels for category.
Hope it helps.
Thanks & Regards,
Ramnaresh.P.

Exporting BEx Query results to CSV or other files.

Hi All,
We have a report designed in WAD, which uses a BEx query to display department’s information. Because of amount of data in the results it crashes when u get all the Free Characters into ROWS(Error is : Result set too large(552244 cells); data retrieval restricted by configuration (maximum =500000 cells). It is a requirement from the user to have all the free characteristics in the rows( which I can understand is not the right way to go ahead). As it is crashing when you add last characteristic(WBS Purpose) into the rows, they aren’t able to export data into spread sheet from the results. (as there are no results)
Now my question is…..is there any way we can export the results from BEX query into any format for example text or csv? If yes, can we schedule that process? Please note that this characteristics are displayed as hierarchies.
Am new to SAP BW and its been only six months since I have been in this role. Any help would be much appreciated???
I looked online and some where in the forum it was mentioned of using program RSCRM_BAPI, but looks like it needs some sort of downloads from SAP.
Is there any other way to export the BEx query results?
Cheers
Sandeep

Hello Sandeep,
You can use the Item "Context Menu" in your WAD and in the properties by default you can see the Options:
Export to Excel & Export to CSV will be there and also there are many options which you wanted to see.
It works for you!!!
With Regards,
PJ.

Getting query results from a PL/SQL procedure

Hi! So, I’m a little stumped and I can’t seem to find the answer to what I believe is probably a simple question…
So, here goes… I have a big ol’ union query that I use to create a report on a page, it’s about 25k – not over the 32k limit, but fails to be able to compile every time (I always get a 400 – Bad Request error). I’m not sure why this is happening, but I can remove a union statement and it compiles just fine – so it has something to do with the size of the query. ANYWAY – I’ve resolved that I should put this bad boy into the database as a stored procedure and just call it from Apex, my problem is I can’t figure out quite how to do this with variables, etc.…
Instead of giving you my whole big query, I’ll use the emp table as the concept is the same:
Say we have a query that creates a report on a page:
select empno, ename, job, mgr, hiredate, sal, comm, deptno
from emp
where job = :P_JOB
and hiredate >= :P_HIREDATE;
How would I take this query, create it as a stored procedure on the db, pass the variables from Apex and return the query result set from the stored proc as a report?
I really appreciate any help on this!
Best,
Gilcrest

Hi Gilcrest,
You should create the query as a View and use the view name and the WHERE clause in the report's sql source.
Andy

Sending email using PL/SQL based on a query result

Hello all,
I want to create a procedure using PL/SQL, based on a query result.Here is the scenario:
I have multiple tables in Target and Source databases that I want to compare(not the whole table but queries on these tables) and if they differ, I want to shoot an email. I have some ideas how to implement this but not sure whether it is the best approach.
select Acct_id, total from SourceTableA
minus
select Acct_id, total from TargetTableA
select Acct_id, sum from SourceTableB
minus
select Acct_id, sum from TargetTableB
If the result of any of above queries > 0 then I want to shoot an email and want to repeat this procedure in the morning every day.
I know how to implement send_mail procedure using UTL_SMTP package and how to schedule tha job by dbms_job package. But I am not sure how to implement the result of minus query. In case if minus > 0 then I also want to send the name of tables in the email message where source and target tables are not same. Should i use cursor, variable or insert the result in a new table? any help would be highly appreciated. Thanks in advance.
Khan

Actually these queries are the part of our daily testing that we run everyday manually(after the scheduled ETL load) to see if there are any discrepencies between our datawarehouse tables and source tables. So instead of running these queries manually everyday we want to schedula a procedure that will shoot an email in case of any discrepency and indicate which tables have problems.

How can I get Numbers to return the first row in a group of VLOOKUP query results instead of last one?

I'm trying to query from one table (call it Table1) a batch of rows in another table (Table2) using VLOOKUP on a date specified in the first table (Table1). My problem is it's returning the last incident in Table2 of the requested date instead of the first incident. This really breaks the OFFSET scheme I'd like to use to collect the rest of the items for that date. Is there some way to compel VLOOKUP to return the first row of query results, not the last?
NOTE: I see I've asked this before, but forgot to go back and look at responses given. It's been a while and I've limped along until now with the way things were. I'm actually trying to delete this questions, so if you see it, ignore it. I suppose if someone can tell me real quick how to delete a stupid question, that might be helpful.

you cannot delete a post yourself. You can flag the post an request a moderator remove.

Warning Message in query result as 'Notification Number DBMAN 345'

Hi ,
I have a warning message while executing the query
'Diagnosis
Currently, it cannot be guaranteed that SIDs and master data exists for all characteristic attributes for the DataStore object to be read.
There is a restriction on a navigation attribute of the listed characteristic in the query. This filters all characteristic values of the master-data bearing characteristic for which there is not yet master data out of the result.
For performance reasons, this filtering is unavoidable.
System Response
Procedure
In case of doubt, find other restirctions directly on the characteristic values of the characteristics contained in the DataStore object.
Procedure for System Administration
Notification Number DBMAN 345 '
'i am getting this error because of cutomer exit variables on navigatioanl attributes of Omaterial'
I tried supressing it in RSRT.. but unable to find the message.
I tried debugging and assigning enhancement points in FM BAL_LOG_MSG_READ.. As it is standard function module its not suggestable to do..
can we creat custom FM ?? will it be called if we write code to supress warning message??
Please let me know how to use BADI'S in order to supress the error message that appearing in query result?
Thanks All.

Hi,
The warning is raised due to the following reasons:
- you have a selection in the filter of a navigation attribute
- in your DSO you do not use the option "SIDs Generation upon Activation"
If the option "SIDs Generation upon Activation" is not flagged,
you may get char.values for an Infoobject in the system not
having any SIDs. As a result you may see in the report less data as
expected.
For example we have Infoobject A with its Nav.attribute B
Infoobject A   Nav.attribute B
12             13   ->> has a SID in the X-table
11             10
9              13   ->> has no SID in the X-table
If you define a selection on B =13 in the query, you only get infoobject
A with key 12 displayed in the result, since only B =13 has a SID
in the relevant X-table.
The warning refers to this behaviour and cannot be avoided unless you:
   - flag the option in the ODS-settings
   - or remove the filter defined on 0MATERIAL__xxxx
Thanks,
Venkat

Saving query results to a flat file

Hello Experts!
We have a very specific issue on our current project and I would like to know if any of you have ever done something similar. We are taking query results from BW (after complex calculations, some based on SY-DATE) and saving them to flat files to transfer to a SQL database structure on the Enterprise Portal. From here, the portal team renders the information into more "static" dashboards that include mouse over features and even limited drilldown (i.e. no matter where a user clicks the report always drills down on profit center)
There are many reasons why the model is set up as such (mostly training of executive level end users), and even though it doesn't mesh with the idea that BW could do this work on its own, we have to work with what we have.
We have come up with 3 possible ways to save this data to flat files and hopefully someone can tell us which might be the most effective.
1.) Information Broadcasting. If we broadcast XML files to the portal, will the portals team be able to read that data into a SQL database? Is there another way to use broadcasting to create and send a flat file to specific location?
2.) RSCRM_BAPI. This transaction seems to not support texts.
3.) Open Hub. In order to get the open hub to work, we first have to save all of our query results to direct write data store objects using APD. (calculations based on current date, for example, would require daily full loads to the underlying data providers otherwise.)
What is the best way to accomplish this? Is information broadcasting capable of doing this?
Thanks!

Hi Adam,
Do you have to use flat files to load the information to a SQL database? (if so maybe someone else has a suggestion on which way would be the best).
I try to stay away from flat file uploads as there is a lot of manual work involved. May I suggest setting up a connection to your SQL table in the DBCON table and then writing a small abap program to push data into the SQL database (which you can automate).
1) Use APD to push data into a table within BW.
2) Go to transaction SM30 > table DBCON and setup a new entry specifying the conncection parameters to your SQL database.
3) In SE38 Write an ABAP program along the folloing lines (assuming the connection you set in DBCON is named conn1:
data: con_name like dbcon-con_name
con_name = 'conn1'.
exec sql.
set connection :con_name
endexec.
****have a select statement which reads data from your table which the data is saved from the APD into an internal table**********
****loop on the internal table and have a SQL insert statement to insert the records into the SQL table as below******
exec sql.
insert into <SQL TABLE> (column names seperated by ,)
values (column names of the internal table seperated by ,) if the internal table is named itab the columns have to be specified as :itab-column1
If you decide to take this approach you may find more info on DBCON and the process in sdn. Good Luck!
endexec.

Large query result set

Hi all,
At the moment we have some java classes (not ejb - cmp/bmp) for search in
our ejb application.
Now we have a problem i.e. records have grown too high( millions ) and
sometimes query results in retrieval of millions of records. It results in
too much memory consumtion in our ejb application. What is the best way to
address this issue.
Any help will be highly appreciated.
Thanks & regards,
Parvez

you can think of following options
1) paging: read only few thousands at a time and maintain a index to page
through complete dataset
2) caching!
a) you can create a serialized data file in server to cache the result set
and can use that to browse through. you may do on the fly
compression/uncompression while sending data to client.
b) applet based solution where caching could be in client side. Look in
http://www.sitraka.com/software/jclass/cs_ims.html
thanks,
Srinivas
"chauhan" <[email protected]> wrote in message
news:[email protected]...
Thanks Slava Imeshev,
We already have search criteria and a limit. When records exceeds thatlimit
then we prompt user that it may take sometime, do you want to proceed? If
he clicks yes then we retrieve those records. This results in lot ofmemory
consumtion.
I was thinking if there is some way that from database I can retrieve some
block of records at a time rather the all records of a query. I wander how
internet search sites work, where thousnds of sites/pages match criteriaand
client can move back & front on any page.
Regards,
Parvez
"Slava Imeshev" <[email protected]> wrote in message
news:[email protected]...
Hi chauhan,
You may want to narrow search criteria along with processing a
limited number of resulting records. I.e. if the size of the result
is bigger than a limit, you stop fetching results and notify the client
that search criteria should be narrowed.
HTH.
Regards,
Slava Imeshev
"chauhan" <[email protected]> wrote in message
news:[email protected]...
Hi all,
At the moment we have some java classes (not ejb - cmp/bmp) for
search
in
our ejb application.
Now we have a problem i.e. records have grown too high( millions ) and
sometimes query results in retrieval of millions of records. It
results
in
too much memory consumtion in our ejb application. What is the best
way
to
address this issue.
Any help will be highly appreciated.
Thanks & regards,
Parvez

How to get Query Results based on Analysis Authorization Ranges????

Hi Experts,
I have gone through the lot of SDN Links, however not able to find the answer to my question.
I have an Authorization Issue, NO Authorization
Error : EYE 007 ( Insufficient Authorizations )
<b>Here is the issue:</b>
Need to see the complete query result when I gave the range in Analysis Authorization for Controlling Area 001-005. Controlling Area is auth relevant and right now a variable is inserted in the query for it. If I select Controlling Area 001, the result for Controlling Area 001 is displayed in query. If 002 then also displayed. If I do not enter anything, then I get the <b>Eye 007 error message</b>.
I am not sure how do I display/authorize the entire result in the query for all the Controlling Areas, I have authorized user to see??
<b>Its really urgent, please help..!</b>
Here are the logs:
Authorization Check Log
Date and Execution Time (Local Server)
Execution Date: 06.09.2007
Execution Time: 14:48:41
Executed Query: 0CCA_C11/GBCCA_MP01_Q0002_AP
Executed by User ZBI_TEST_001
Executed with Analysis Authorizations of Another User ZBI_TEST_001
InfoProvider Check
Building the Buffer...
...Buffer Built
Are there authorizations for accessing InfoProvider 0CCA_C11 with activity 03?
Authorization exists for general access to InfoProvider 0CCA_C11 with activity 03
InfoProvider Check
Authorization exists for general access to InfoProvider 0CCA_C11 with activity 03
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider 0CCA_C11:
0CO_AREA
0TCAACTVT
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider :
List Is Empty:
There Are No Characteristics That Have to Be Checked in Detail
Authorization Check
Detail Check for InfoProvider 0CCA_C11
Preprocessing:
Selection Checked for Consistency, Preprocessed and Supplemented As Needed
Subselection (Technical SUBNR) 1
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
End of Preprocessing
Filling the Buffer...
...Buffer Filled
Main Check:
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
CO_AREA = '0003'
AND TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Authorized
Subselection (SUBNR) Is Authorized
Authorization Check Complete
Authorization Check
Detail Check for InfoProvider 0CCA_C11
Preprocessing:
Selection Checked for Consistency, Preprocessed and Supplemented As Needed
Subselection (Technical SUBNR) 1
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
End of Preprocessing
Filling the Buffer...
...Buffer Filled
Main Check:
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Partially or Fully Authorized (Intersection)   Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
( CO_AREA < '0001'
OR CO_AREA > '0005' )
AND TCAACTVT = '03'
Value selection partially authorized. Check of remainder at end
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
( CO_AREA < '0001'
OR CO_AREA > '0005' )
AND TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Not Authorized
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
184 ( 0CO_AREA )
Authorization Check Complete

Hi,
    Have you defined the vaule for 0CO_AREA as BT 001-005 in you Authorization for 0CO_AREA.Also how have you defined your Authorization Variable on the query? Have you define as select options or interval? I thing you need to define it as interval or select options.
Hope it helps,
Cheers,
Balaji

How to use one query results in another query

hi,
in help.sap I have founded that using variable type replacement path I can use one query results in another query. It is wrote there that I have to choose query name results I want to get in variable definition but I do not know where.
How I can do this?
Result I want to get is:
In one query I have material prices in another material quantities. I want to calculate inventory value (price * quantity). Moreover prices are on plant level, quantities on storage type level. Plant is atribute of storage type.
Can I do this?
Regards,
Andrzej

Hi Andrzej,
please check out this thread: Set parameters values depending on other parameters
I had a discussion about query results as input for another query in there.
For creating a workbook, just click on the save button after you ran your query in the bex.
Siggi
Message was edited by: Siegfried Szameitat

Pass query result as parameter to javascript

Hello,
I'm a beginner with javascript, so (maybe) sorry for this
question.
Is it possible to use a query result as parameter in a
javascript function
for example like this?
<cfquery name="select_data">
select name from user_table
</cfquery>
<script language="javascript">
function(#select_data.name#)
</script>
Background is: I have to validate an input field with some
values which are saved in a database table.
This values can be dynamic , so I don't want to put this
values into the cfm-file.
Any ideas?
Claudia

Each column in a cf query is effectively a 1D array. You can
use the toscript function to send this array to js.

How can I architect my data layer to yield query result pages to the application as SQL Server prepares them?

I tried to make the question as explicit as possible.
Refer to Sql Server Management Studio's Results view. Depending upon the structure of the execution plan, the Results pane may begin displaying results while the query is still executing. Can someone point me in a direction for architecting a
data layer (I am tech and framework agnostic for this task. Any solution will suffice) that will begin receiving pages of the set before SQL Server has completed the entire query?
The call from the data layer to SQL Server will obviously have to be asynchronous, but is there any additional ceremony that I need to be aware of when issuing OPTION (FAST x) to the query optimizer?

Thanks for the reply. (I actually meant to put this in the SQL Data Access forum, not the T-SQL forum)
"Generally the last step is ORDER BY in a
query, so nothing can start before that executes."
I would imagine you cannot ORDER BY and yield results as they are fetched because of the execution plan that would be generated. For the purposes of this post, please assume that sorting will be done purely client side
"Can you post your query?"
For purposes of discussion, let's assume that the query is
select *
from information_schema.columns
and also assume that you have "lots" of columns to display.
This was an exploratory question to see what would be necessary to replicate the behavior of Management Studio's Query Result view in a custom application.
I would imagine that there's going to be a lot of analysis of the execution plans that get generated in order for the OPTION (FAST x) optimizer hint to do any good, but apart from general tuning concerns that would allow SQL SERVER to yield a page of data
"fast", I was wondering if there was anything else required of the calling client to force it to yield return its first page.
After thinking about this (and phrasing it the way I did in the last sentence) perhaps this is the incorrect forum for this question. I imagine that my concerns are better addressed in forums dedicated to the technology of the calling client (which
would be a .NET assembly)
Be that as it may, if there is any ceremony that SQL Server imposes on clients in order to yield return, I would expect that my question would be in the scope of SQL Server discussions (even though I intended this to be in a different SQL Server forum)

How to generate XML file from oracle database query result

Hi dudes,
as stated on the subject, can anyone suggests me how can i achieve the task stated above??
Here is a brief description of my problem:
I need to create a XML file once i query from the oracle database, and the query result returned from the database will be stored in XML file.
I'd searched around the JAXB, DOM, SAXP and the like basic concepts, but i still don't know how to start??
Any suggestions ???

Read this:
http://www.cafeconleche.org/books/xmljava/chapters/ch08s05.html
You might have to read more of the book to understand that chapter.

WAD query results in JUNK

Similar Messages

Maybe you are looking for