Wae-574 single disk system replacement

Hello,
We've had a wae-574 lose it's only disk. Can someone confirm the steps I need to do to replace it? I know I need to power off the unit and replace the drive. Do I need to do a disk shutdown beforehand?
Do I need to do anything to have it recognize the replacement drive and rebuild it? All of the documentation I've found talks about replacing a drive in a multidrive raid 1 or raid 5 system but I'm not finding what steps I need to take in a single disk system scenario.
The system is still up and running it's just not accelrating any traffic at the moment.
Thanks,
Elliott

No problem. Mine knew the exact procedure but I had a hard time at the beginning convencing him the drive was actually dead since I could not generate the standard sysreprt or diagnostic report. There are no and apparently never were any drive lights. Once I got started I just had to figure out the missing pieces such as the de-register / re-register force stuff.. Also some of these did not apply as I do not have multiple drives for mirroring but the system let me know that. Here are the details he started me with...
++You need to burn this file into a disk and then follow these steps :
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/wae/troubleshooting/recoverycd/guide/17088rcd.html
There are 8 steps here, out of which you need to use 2,3,5 & 7 with the disk inserted and step 8 after manually removing the device. Step 7 should be repeated twice to make sure no file remains corrupted. Leave 1st,4th & 6th step entirely in this case.
++If you don’t have physical access to the device and the device is accessible remotely, you can download this file in accelerator.bin format from the Cisco website to your FTP server and install the software directly from there. In that case use this command on the CLI of the device :
#copy ftp install ftpserver / waas-image.bin
(This example assumes that the file is in the root directory of the FTP server. Provide the correct path if needed.)
You can go through this document to refer how to install from FTP server:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/upgrade/guide/waas_upgrade-44.html
Brent

Similar Messages

Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac pro but will not boot. Can original install disks be replaced. Thanks

Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac Pro but will not boot. Can original install disks be replaced. Thanks

Yes the original Install Discs can be replaced for a nominal fee. Call AppleCare, you will need a credit card and the serial number of the machine. You can use the AppleCare Contact Info for the phone number on your part of the planet.

WAE 574 resilience query

Hi,
I am implementing WAAS on our network and am currently in the pilot phase, we are using WAE-7341 at our 3 data centre sites and 30 WAVE-574's at our branch sites.
As standard the WAVE-574's come with one hard drive, I am looking to buy an additional hard drive to go into each 574 so the disks are configured in a RAID 1 for resiliance.
My question is, if we were to keep with having just the one hard drive in each device and that hard drive went down, how would it effect the WAE and optimisation?
Would the WAE stay up? would it carry on accelerating traffic without local caching? if the device was rebooted would the device come back up? I'm trying to get an idea of what impact it would have if we didn't have a resiliance hard drive configuration.
Many thanks in advance for your help
Adam

Adam,
The 574 equipped with a single hard drive that failed would stay accessible on the network but would not be able to optimize or accelerate any traffic. The disk when replaced would also need the operating system re-installed. If the 574 were equipped with two disks in a RAID1 and were to lose a disk it would continue to function normally but without the redundancy. The failed disk would simply need to be replaced and redundancy would return once the RAID rebuilds anywhere from 2 to 5 hours.
Regards
Dave

Database files into a single disk or multiple disk ?

Hi All,
I want to install oracle database 11gR2 in to database server. This database server has three internal disk so I plan to put DBF,redo and ctl file in to different disk..
but this is the optimal configuration by putting all the Database files (DBF,redo and ctl) into a differnt differnt disk or put all the files into a single disk with differnt partition? I want to minimize the disk I/O.
Thanks in advance.

Hi;
It depends what you expect from your system. You can put into a differnt differnt disk or put all the files into a single disk with differnt partition. If you put all in one partition its more managable, but It also bad for HA.
You need to check your priorty and you need to decide what you have to do
Regard
Helios

Multi-Processor Systems vs Single Processor systems

In general, is it better to run Weblogic on a fast single processor system
or on a multi-processor system where the individual cpus are less powerful?
I am assuming that the platforms are WINTEL and all other things (memory,
disk channels etc) are equal.
What are the licensing implications of one philosophy over the other?

Jim Ewing wrote:
>
In general, is it better to run Weblogic on a fast single processor system
or on a multi-processor system where the individual cpus are less powerful?
I am assuming that the platforms are WINTEL and all other things (memory,
disk channels etc) are equal.You'll hate me for saying this, but it depends on your application and
your client load.
I'd suggest that you run a load test against both systems and compare
the results.
>
What are the licensing implications of one philosophy over the other?You pay for WLS by the number of CPUs.
-- Rob
Coming Soon: Building J2EE Applications & BEA WebLogic Server
by Michael Girdley, Rob Woollen, and Sandra Emerson
http://learnweblogic.com

LightDM greeter for a single-user system

I'm interested in using lightDM as my display manager. However, there seem to be a lot of greeters that are focused on a good experience for multi-user systems. All I'm have is a single-user system, so I'm looking for your guy's opinions on what the "best" lightDM greeter is for a single-user system. I want it to:
* Be pretty, even if it must be a bit more heavyweight. I consider "pretty" to mean modern/flat
* Be customizeable, hopefully with at LEAST customizeable colors, and preferably background images
* Have either a very modern/flat icon set, if there are icons at all, or customizeable icons
* Not force me to select my account every time I login, it should automatically "select" my account so all I have to do is enter the password. I *might* budge on this one if the design is *really* good
I'm ok if it has support for multiple users (I'm pretty sure every greeter out there will have that), but I don't want it to reserve too much space on the screen for multiple users, and I want it to still be good with one user. For example, I don't want it to be like crowd greeter, where it's nearly useless without many user accounts

Why not just test a number of greeters and evaluate which one most suits your use case? That's the common approach with most things.
You could also try other DMs like LXDM for example, in order to see how they compare.

Hard disk failure, replaced; how to get songs from iPod back into iTunes

Hard disk failure, replaced with new hard drive etc;
How do I get all songs from iPod back into iTunes?
(mix of CD sourced and iTunes shop sourced)

I can't believe there's no answer to this. Apple wants to charge customers for support but this has got to be happening thousands of times a day what with Windows OS reinstalls being what they are-numerous! Please let me know if/when you get a reply, thx!

I have a the Spring 2011 iMac and I am looking to connect both my Bose Companion 2's with my new Companion 20's together to have one single audio system, any suggestions on how this can be done?

I have a the Spring 2011 iMac and I am looking to connect both my Bose Companion 2's with my new Companion 20's together to have one single audio system, any suggestions on how this can be done?

FIxed my problem!
After years the problem was solved somply!
Go to System preferences
Go to Ethernet
Go to Advance
Go to Hardware
The just make the changes like in the pictures below

I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.

I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

Merging two separate MUSE sites into a single MENU system and Paid & online BC eCommerce site

Hi all! I am stuck trying to figure out a Process Conundrum:
1> I have a BC site with e-commerce ready to go - paid - online with store template in place.
2> I also Have a 2nd MUSE created web site (with the client content/pages) that needs to merge with that E-commerce BC site.
What is the move to merge the two separate sites into a single site with the Menus all in proper order?
Is this simple and I can not see it? (merge the two sites in a folder and reopen in muse for new menus?
Or do i need Dreamweaver to assist in the merge?
In other words:
What is the PATH/PROCESS to merge a 2nd MUSE designed web site (sans e-commerce), in order to tie into the online BC e-commerce template paid site - so the menus update together as "one" site?
Menu Update Concern: merging two separate MUSE sites into a single MENU system with the "Paid on line Active BC e-commerce Template". How do it do it Process wise so that the menus adjust automatically... so they are "one" menu.
Reminds me of an old joke: Q: "What did the Buddhist say to the hot dog vendor at the ball park?"
A: "Make me one with everything!"
ONWARD>>>>>
Possible paths I am about to take attempting to Solve the problem - and scale the learning curve...
download the BC e-commerce site into Dreamweaver -
export the 2nd muse site by publishing it to a unique folder.
combine them by going back into dream weaver and attempting to figure out linking the menus. - perhaps they are automatic there too.
or load them both up to BC and back down to MUSE to fix the menus?
I appreciate Any recommendations, hits or humor that you could help on this.
Cheers!

Thanks, Liam... I will get it eventually...
Sadly: I do not have a budget to hire this out...
   - I have gone through lots of the BC and Muse training exercises. Adobe
   and BC Gurus.
But... if the only problem is that I need to work though my partner site BC
interface...
   - that would be fine...
   - so would using dream weaver....
I will go back and review the BC interface and also dreamweaver
capabilities.
without a budget... i need to figure it out... please do point to any
material or training you might be able to point me to.
I don't have to use muse, if that is my sticking point. I just need to get
the project up and BC looks perfect.
Thanks.

Can we connect 2 ECC to a single PI system.

hi ,
can we connect 2 ECC to a single PI system. here we would be using proxies in the 2 ECC.
Is it possible to enable the SProxy for both systems.
EG: ECC1< -> PI (A)<-.>APO
ECC2<-->PI (A)<-.>APO
Regards,
Praveen K
Edited by: praveen kalwa on Jul 29, 2010 5:34 PM

Yes. you can connect 2 ECCs to a single PI system.
You have to create two entries for Proxy in sm59.
Please refer the below document for the proxy configuration.
(Put 'Proxy configuration in SAP XI' in Google Search & You will get a document from saptechnical.)
If everything goes fine, from both the ECC systems you can see the PI interfaces(Transaction : SPROXY) and implement them.
Edited by: soumen patra on Jul 29, 2010 3:42 PM

What is whole system replacement

I have searched everywhere but I cannot find an explanation as to what this is so could someone please tell me what a whole system replacement is. I only know that it is a data recovery method. I also know that it is used after a disaster occurs in an
organization as part of their disaster recovery plan

Hi,
Yes, based on my knowledge, whole system replacement would mean if huge disaste happened to your system and you could no longer use it, then the whole system would be replaced for you.
In windows 7, you can backup your personal files and create a system image, which can avoid such disaster in case your system is damaged or you upgrade to other windows version.
More information about Windows Backup and Restore, please refer to these articles:
http://windows.microsoft.com/en-us/windows7/what-is-a-system-image
http://windows.microsoft.com/en-us/windows7/products/features/backup-and-restore
Andy Altmann
TechNet Community Support

Is there a way to combine two backups on separate disks created by time machine into one on a single disk?

Is there a way to combine two backups on separate disks created by time machine into one on a single disk? One backup is a continuation of the other and was created when I rec'd a message that the 1st disk was full. I'm using a iMac (late 2010) and both external drives are WD. Thanx.

With the timeline selected, go to File/Export/Movie and export each as a DV-AVI video.
You can then combine those AVIs into a new project with virtually no loss of quality.

Possibility of connecting multiple BW systems to single ECC system

Hi all,
I have a requirement in my company to connect multiple BW systems to single ECC system. Would like to confirm whether this may not be supported by all BW extractors in particular the delta mechanism?
For logistics extractor in ECC side in RSA7 it stores BW System as target which shows they support multiple BW systems as target, but for FI extractors which keeps delta timestamps in BWOM2_TIMEST table, it doesn't store the target system. I'm afraid if we connect multiple BW systems to single ECC system, some of the delta records might go to one BW system and some others go to the other BW system when we execute delta load in both BW systems.
Thank you very much in advance.
regards,
arie

Hi,
You can very well connect multiple BW systems to single ECC system and you will not miss any delta as well. In the source system for each delta data source a delta queue is maintained for each target system.
for e.g. I have two BW systems ABW and BBW connected to AEC system then for 0FI_AP_4 data source we will have DQ1_ABW and DQ2_BBW as two different delta queues (I am not following any naming conventions, actual names will be as per the target system logical name).
The settings maintained in BWOM2_TIMEST table are across the system and they define some global settings e.g. till what time the FI data should be extracted in BW system, for e.g. the time maintained is 2.00 AM then though you do extraction from multiple systems same data will be extracted till next time interval occurs.
In summery you can very well connect multiple BW systems to a single ECC system.
Regards,
Durgesh.

My computer keeps giving me an error message "non sysetm disk or disk error replace and strike any

My computer keeps giving me an error message "non systne disk or disk error replace and strike any key when ready" It is a HP elite notebook. WHen I strike any key it looks as though it is running scripts and return to the above error. Is there a way to reset the computer to a point in time when it function normally?

My suggestion is to start unit and press F10 to get into BIOS. Navigate to Diagnostics and select Hard Disk Self Test. This will test your Hard Drive for errors and failure. If the hard drive does not pass both tests, you will need to replace the hard drive and obtain recovery disks.
I work for HP.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

Wae-574 single disk system replacement

Similar Messages

Maybe you are looking for