WAG325N (Ping time ~7k ms and connection dies)

Hello,
I got a new problem now or maybe I could call it a old problem becouse I had it with my old WAG325N I hope I can get help to fix this or I trow this ISR in the dustbin.
Now after some use I got the same problem as I had on my old WAG325N (1.00.06) ISR, I did return that one and did get this new one.
The problem is that after ~15 hour of use the WLAN get unstable and disconnect me and the ping time to the router get extreme hight avg. ~7000 ms (~7% lost) and the internet connection goes down but then I view the status page on the router(after waiting 2 min for it to load) it's say that the ADSL connection is good.
The problem gets solved by rebooting(sometimes system restore is needed) the router and then it works fine for another ~15 hour and this problem comes again..
This is the only strange thinks I cane find in the log: (the date is a bit off? )
Sat, 2000-01-01 02:00:15 - /proc/adsl has not been found
Sat, 2000-01-01 02:01:15 send out NTP request to ntp.nasa.gov
Sat, 2000-01-01 02:02:39 send out NTP request to time-nw.nist.gov
The configuration is:
WAG325N (1.00.08)
RFC 1483 Bridged, DHCP
Wide - 40 MHz (channel 7), 2.452 GHz, SSID Broadcast, WPA2
Firewall On blocking Anonymous (stealth (DMZ))
QoS is on with a few rules
logging is turned on and email alert also
Computers on WLAN:
3xApple computer using wireless N
Ubuntu computer using wireless G
FreeBSD computers using wireless G
(test: Windows XP computer using wireless G)
Computers using wire:
FreeBSD computer using 100Mps (Static IP)
Ubuntu computer using 100Mps (Static IP)
Apple computer using 100Mps
(test: Windows XP computer using 100Mps)
Thanks allot for your help. ^^
Old problem: (fixed)
Hello, I just got my new WAG325N after my first one didn't work and now I wanted to upgrade it to 1.00.08 but then I try to it's false. I "upload" the file and the loadbar starts and it's goes to 3-4% and then the screen just turn white. The other things I would like to have help with is: Can I give one of my computers a fixed IP and have the rest computers have DHCP? And how do I do it? What do the firewall do? Which ports does it block/not block is it "stealth" can I set "advance" firewall rules so I can decide witch ports that should be open closed? Thanks for helping a newb. ^^ Oh btw. --- System Information --- Vendor: Linksys ModelName: WAG325N Firmware Version: A1.00.06, 2006-12-04 Boot Version: 1.0.37-5.4 Hardware Version: 0.01 Message Edited by vega_2007 on 10-20-2007 06:11 AM
Message Edited by vega_2007 on 10-20-2007 02:14 PM
Message Edited by vega_2007 on 10-21-2007 03:20 AM

Hello,
I got a new problem now or maybe I could call it a old problem becouse I had it with my old WAG325N I hope I can get help to fix this or I trow this ISR in the dustbin.
Now after some use I got the same problem as I had on my old WAG325N (1.00.06) ISR, I did return that one and did get this new one.
The problem is that after ~15 hour of use the WLAN get unstable and disconnect me and the ping time to the router get extreme hight avg. ~7000 ms (~7% lost) and the internet connection goes down but then I view the status page on the router(after waiting 2 min for it to load) it's say that the ADSL connection is good.
The problem gets solved by rebooting(sometimes system restore is needed) the router and then it works fine for another ~15 hour and this problem comes again..
This is the only strange thinks I cane find in the log: (the date is a bit off? )
Sat, 2000-01-01 02:00:15 - /proc/adsl has not been found
Sat, 2000-01-01 02:01:15 send out NTP request to ntp.nasa.gov
Sat, 2000-01-01 02:02:39 send out NTP request to time-nw.nist.gov
The configuration is:
WAG325N (1.00.08)
RFC 1483 Bridged, DHCP
Wide - 40 MHz (channel 7), 2.452 GHz, SSID Broadcast, WPA2
Firewall On blocking Anonymous (stealth (DMZ))
QoS is on with a few rules
logging is turned on and email alert also
Computers on WLAN:
3xApple computer using wireless N
Ubuntu computer using wireless G
FreeBSD computers using wireless G
(test: Windows XP computer using wireless G)
Computers using wire:
FreeBSD computer using 100Mps (Static IP)
Ubuntu computer using 100Mps (Static IP)
Apple computer using 100Mps
(test: Windows XP computer using 100Mps)
Thanks allot for your help. ^^
Message Edited by vega_2007 on 10-20-2007 02:48 PM

Similar Messages

  • Suppose I have two identical laptops loaded with my current time machine back up. I take one on a trip and update it with time machine but leave it. I come back w time machine HD and connect the home laptop, will it just update or start over from scratch?

    Suppose I have two identical laptops loaded with my current time machine back up. I take one on a trip and update it with time machine but leave it behind. I come back with the time machine HD and connect it to the home laptop, will it just update or start over from scratch? is there a way to make it just update it?

    You might have better luck using a clone.
    Clone  - Carbon Copy Cloner          (Often recommended as it has more features than some others)
    Clone – Data Backup
    Clone – Deja Vu
    Clone  - SuperDuper
    Clone - Synk
    Clone Software – 6 Applications Tested
    Commonly Used Backup Methods

  • HT201407 i cannot activate my iphone 3Gs i tried many times using wifi and connect. to itunes but activtion is always failed

    Hi, i cannot activate my iphone 3Gs i tried many times using wifi and connect. to itunes but activtion is always failed. can you help me to fix this problem?

    Do you have a SIM in the phone?
    A SIM is required to activate it.
    If you DO have a SIM in it, the most common cause of this problem is a phone that was hacked to illegally unlock it and has been updated or restored.

  • Why does my signal drops and takes a long time to search and connect when I turn on or off my cellular data? And normal text messages are not getting delivered properly. It shows sent but later it will show try again, Is it just me?

    I do not know what the problem is, but after the latest update it is really hard to send text messages. It is taking alot of time to send the messages, it is not the problem with the carrier because sending text messages with the same number in the same area is really easy on my normal nokia 1100. Please suggest me what I should check. Second problem I am facing is the carrier signal drops to nothing when I turn on the cellular data. It has to then search for the network and connect again the same happens when I turn the data off again. Please tell a solution. I do not think it is the problem with the hardware because the phone is hardly 2weeks old and everything was working properly with ios 6. It initaly had problem with the battery on updating to ios7 but that was rectified with the new update but again these are the new issues am facing.

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • Which format for external hard drive to use with time machine backup and connect to windows laptop?

    Hi!  I have an external hard drive on which I have transferred my iTunes library (just mine - not others).  I have also a folder containing just films (some but not all of which are in iTunes too)  Everything has been working just fine until yesterday I noticed that Time Machine was not including the external hard drive in back up as it wasn't formatted.  So I have moved everything back to the Mac hard drive and and ready to format the external hard drive - but understand that if I do the contents cannot be opened from a windows laptop ...  is that right?  Is there are format I could choose that would allow Time Machine to back up and allow Windows to open as well (the idea being that I take the external hard drive with me on holidays etc!!)  Many thanks for any advice. 

    ok - I understand.  I have managed so far to format the drive (on windows) to exFAT file system - which apparently works with both Windows and Mac - but you're  correct - it will not be included in time machine backup as I have checked the back up files and Samsung is not showing.  Reckon I'm onto having to buy yet another portable hard drive just for windows - or of course buy myself a new mac book!!  Can I ask you please - does the drive have to be clear of everything before I change the format - or can I change it with the files still in there?  Also, got any quick ways duplicating the files onto another External Hard drive (for use on the windows laptop)  At the moment the files are taking 2/3 hours + to copy over!  Thank you! 

  • Takes a long time to find and connect to wireless

    I've had this problem for a long time and have done extensive research. On this Thinkpad Edge bought from Office Depot a few years ago, every time the laptop wakes up from Sleep, it takes one and half to two minutes to find the wireless signal. No other devices in the house have this problem. I've turned off all kinds of power saving features to no avail. Any advice is appreciated.

    ldcorn wrote:
    My computer also has been taking a long time to find a wireless network, up to several minutes. I often have to have it "scan" for networks several times before it finally picks it up. Is there a solution? This has been going on for many months. Other computers (PCs, iPhone) pick up the signals within a few seconds, but my Powerbook takes several minutes, even over 5 minutes sometimes.
    See how many networks are listed in Sys Prefs: Network: Advance. Drag the preferred to the top. Delete any you don't really need.
    Message was edited by: tjk

  • Time Machine won't connect to sparsebundle, wants to start over. Pls help!

    I was in the midst of a 40GB iTunes Folder recovery, when it stopped after 5GB.
    Now, when I go to Time Machine preferences and connect to the backup drive, it wants to start over rather than "reconnecting" to the old sparsebundle.
    I've double-clicked the sparsebundle to open it and see that all my backups are in there... but of course, they're backed up in increments. I need to know how I get Time Machine to continue with the backups it already has.
    I'm using Mac OS 10.6.7 on a MBP 13". Time Machine is being used on an Airport Extreme with connected Air Disk (WD hard drive). I know this may be officially unsupported, but I've had no problems with it for the year that I've been using Time Machine to back up and recover various files. I don't think anything is wrong with the sparsebundle other than it isn't seeming to want to reconnect to it.
    I would really appreciate your help. I would hate that I started replacing (and lost) an entire 40GB iTunes folder for the silly reasons I'd wanted to restore it.

    Harv Nagra wrote:
    Time Machine is being used on an Airport Extreme with connected Air Disk (WD hard drive). I know this may be officially unsupported, but I've had no problems with it for the year that I've been using Time Machine to back up and recover various files.
    That's likely the cause of the problem, and is the reason we advise against it -- it may work, for a while, but sooner or later, the backups tend to turn up corrupted.
    Try repairing them, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
    If that doesn't help, you might be able to view and restore from the backups in that sparse bundle via the +*Browse Other Time Machine Disks+* option, per #E2 in Troubleshooting.
    Whether you can recover the data or not, you're playing with fire. Please see #2 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for supported destinations; and #27 for advice on "secondary" backups.

  • Ping time out, server connection is lost in visual administrator after java

    Dear all,
    Recently I have done system copy for XI system. I have imported the java import after importing  the abap stack into the target system as java add in abap.The import phase finished successfully and java engine is also working well.
    I have confirmed this by moving to the browser page  " http://hostname:50000/ and XI system  http://hostname:50000/rep ". Everything is working fine and in MMC console as well.
    But while trying to log in to visual administrator i am getting the error message as " ping time out,connection to server is lost "
    std_serverout.log
    unrecoverable stack overflow has occurred.
    An unexpected error has been detected by HotSpot Virtual Machine:
    EXCEPTION_STACK_OVERFLOW (0xc00000fd) at pc=0x00000000080e3c66, pid=2940, tid=928
    Java VM: Java HotSpot(TM) 64-Bit Server VM (1.4.2_16-b05 mixed mode)
    Problematic frame:
    V  [jvm.dll+0xe3c66]
    An error report file with more information is saved as hs_err_pid2940.log
    stdout/stderr redirect
    node name   : server0
    pid         : 3060
    system name : XIT
    system nr.  : 03
    started at  : Tue Feb 17 18:42:50 2009
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    SAP J2EE Engine Version 6.40   PatchLevel 100627.313 is starting...
    Loading: LogManager ... 453 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 94 ms.
    Loading: ThreadManager ... 31 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 219 ms.
    Loading: LockingManager ... 93 ms.
    Loading: ConfigurationManager ... 1502 ms.
    Loading: LicensingManager ... 31 ms.
    Loading: ServiceManager ...
    6.226: [GC 6.226: [ParNew: 87040K->8544K(130560K), 0.0628724 secs] 87040K->8544K(1005056K), 0.0629982 secs]
    Loading services.:
      Service memory started. (16 ms).
      Service cross started. (15 ms).
      Service file started. (78 ms).
      Service timeout started. (32 ms).
      Service runtimeinfo started. (15 ms).
      Service userstore started. (63 ms).
      Service trex.service started. (94 ms).
      Service jmx_notification started. (63 ms).
      Service p4 started. (235 ms).
      Service classpath_resolver started. (15 ms).
    10.537: [GC 10.537: [ParNew: 95584K->16246K(130560K), 0.0776272 secs] 95584K->16246K(1005056K), 0.0777727 secs]
      Service deploy started. (3926 ms).
      Service log_configurator started. (4363 ms).
      Service locking started. (0 ms).
      Service http started. (172 ms).
      Service naming started. (203 ms).
      Service failover started. (78 ms).
      Service appclient started. (110 ms).
      Service javamail started. (140 ms).
      Service jmsconnector started. (140 ms).
      Service ts started. (125 ms).
      Service licensing started. (16 ms).
      Service connector started. (188 ms).
      Service configuration started. (31 ms).
      service MobileSetupGeneration ================= ERROR =================
      Service MobileArchiveContainer started. (78 ms).
      Service webservices started. (470 ms).
      Service dbpool started. (1172 ms).
    13.195: [GC 13.196: [ParNew: 103286K->20423K(130560K), 0.0478316 secs] 103286K->20423K(1005056K), 0.0489244 secs]
      Service com.sap.security.core.ume.service started. (2596 ms).
      Service security started. (2471 ms).
      Service classload started. (78 ms).
      Service applocking started. (141 ms).
      Service shell started. (188 ms).
      Service tceCATTPingservice started. (32 ms).
      Service telnet started. (63 ms).
    18.218: [GC 18.218: [ParNew: 107463K->25937K(130560K), 0.0545612 secs] 107463K->25937K(1005056K), 0.0546428 secs]
      Service webdynpro started. (203 ms).
      Service ejb started. (532 ms).
      Service dsr started. (172 ms).
      Service keystore started. (485 ms).
      Service ssl started. (16 ms).
      Service servlet_jsp started. (704 ms).
      Service tcsecsecurestorage~service started. (63 ms).
      Service jmx started. (391 ms).
      Service tclmctcculculservice_sda started. (0 ms).
      Service rfcengine started. (656 ms).
      Service tcsecwssec~service started. (469 ms).
      Service apptracing started. (360 ms).
    19.355: [GC 19.355: [ParNew: 112977K->42681K(130560K), 0.0844669 secs] 112977K->47563K(1005056K), 0.0845476 secs]
      Service tcsecdestinations~service started. (907 ms).
      Service basicadmin started. (860 ms).
      Service adminadapter started. (297 ms).
      Service pmi started. (312 ms).
      Service tclmctcculservice_sda started. (1251 ms).
      Service tcsecvsi~service started. (438 ms).
      Service monitor started. (407 ms).
      Service sld started. (1721 ms).
    20.296: [GC 20.296: [ParNew: 129721K->39952K(130560K), 0.1028212 secs] 134603K->50894K(1005056K), 0.1028881 secs]
      Service tc.monitoring.logviewer started. (1704 ms).
    21.584: [GC 21.584: [ParNew: 126992K->40823K(130560K), 0.0664458 secs] 137934K->58110K(1005056K), 0.0665026 secs]
      Service jms_provider started. (3518 ms).
      Service com.sap.aii.af.cpa.svc started. (2033 ms).
      Service com.sap.aii.af.security.service started. (16 ms).
      Service com.sap.aii.af.svc started. (157 ms).
    22.873: [GC 22.873: [ParNew: 127863K->43238K(130560K), 0.0574693 secs] 145150K->65266K(1005056K), 0.0575210 secs]
      Service com.sap.aii.af.ms.svc started. (407 ms).
      Service com.sap.aii.adapter.marketplace.svc started. (47 ms).
      Service com.sap.aii.adapter.bc.svc started. (47 ms).
      Service com.sap.aii.adapter.xi.svc started. (47 ms).
      Service com.sap.aii.adapter.jms.svc started. (79 ms).
      Service com.sap.aii.adapter.mail.svc started. (63 ms).
      Service com.sap.aii.adapter.jdbc.svc started. (156 ms).
      Service com.sap.aii.adapter.rfc.svc started. (219 ms).
      Service com.sap.aii.af.ispeak.svc started. (313 ms).
      Service com.sap.aii.adapter.file.svc started. (2315 ms).
    ServiceManager started for 22082 ms.
    Framework started for 24772 ms.
    SAP J2EE Engine Version 6.40   PatchLevel 100627.313 is running!
    PatchLevel 100627.313 December 14, 2005 20:06 GMT
    >26.086: [GC 26.086: [ParNew: 130278K->23111K(130560K), 0.0693509 secs] 152306K->68371K(1005056K), 0.0694372 secs]
    32.059: [GC 32.059: [ParNew: 110151K->34716K(130560K), 0.0419854 secs] 155411K->79975K(1005056K), 0.0420301 secs]
    32.608: [GC 32.608: [ParNew: 121756K->43497K(130560K), 0.0827214 secs] 167015K->105659K(1005056K), 0.0827638 secs]
    38.688: [GC 38.688: [ParNew: 130537K->39986K(130560K), 0.0525517 secs] 192699K->106409K(1005056K), 0.0526114 secs]
    41.615: [GC 41.615: [ParNew: 127026K->32598K(130560K), 0.0467433 secs] 193449K->103188K(1005056K), 0.0467930 secs]
    44.298: [GC 44.298: [ParNew: 119638K->34820K(130560K), 0.0430069 secs] 190228K->105410K(1005056K), 0.0432422 secs]
    46.443: [GC 46.443: [ParNew: 121860K->39729K(130560K), 0.0498349 secs] 192450K->110319K(1005056K), 0.0499023 secs]
    48.656: [GC 48.656: [ParNew: 126769K->36669K(130560K), 0.0625983 secs] 197359K->112667K(1005056K), 0.0626567 secs]
    52.243: [GC 52.243: [ParNew: 123709K->39589K(130560K), 0.0477260 secs] 199707K->115587K(1005056K), 0.0477793 secs]
    115.241: [GC 115.241: [ParNew: 126629K->37429K(130560K), 0.0553704 secs] 202627K->118544K(1005056K), 0.0554346 secs]
    118.096: [GC 118.096: [ParNew: 124469K->40865K(130560K), 0.0504829 secs] 205584K->121980K(1005056K), 0.0505322 secs]
    120.589: [GC 120.589: [ParNew: 127905K->37247K(130560K), 0.0578313 secs] 209020K->123954K(1005056K), 0.0578734 secs]
    122.573: [GC 122.573: [ParNew: 124287K->39626K(130560K), 0.0534208 secs] 210994K->126333K(1005056K), 0.0534640 secs]
    124.070: [GC 124.077: [ParNew: 126666K->35377K(130560K), 0.0626490 secs] 213373K->128235K(1005056K), 0.0627628 secs]
    126.103: [GC 126.103: [ParNew: 122417K->37886K(130560K), 0.0485833 secs] 215275K->130744K(1005056K), 0.0486433 secs]
    128.251: [GC 128.251: [ParNew: 124926K->41258K(130560K), 0.0482213 secs] 217784K->134115K(1005056K), 0.0482675 secs]
    130.792: [GC 130.792: [ParNew:
    Due to this i am not able to log in visual adminsitrator.Kindly advice me for the same.
    Thanks in advance
    Vijay

    Hello vamshi,
    As you have suggeseted, I followed the notes and changed the following paramters.The system is 64bit and hence the values are adjusted according to the server.
    -Djco.jarm=1
    -Dsun.io.useCanonCaches=false
    -Djava.awt.headless=true
    -XX:SoftRefLRUPolicyMSPerMB=1
    -verbose:gc
    -XX:+PrintGCDetails
    -XX:+PrintGCTimeStamps
    -Xss2m
    -Xms2048M
    -Xmx2048M
    -XX:MaxNewSize=320M
    -XX:NewSize=320M
    -XX:MaxPermSize=512M
    -XX:PermSize=512M
    -XX:SurvivorRatio=2
    -XX:TargetSurvivorRatio=90
    -XX:+UseParNewGC
    -XX:+UseTLAB
    -XX:+HeapDumpOnCtrlBreak
    The heap size for java is 2048
    But still i am getting the ping time out. Connection to server is lost.
    Kindly let me know,
    Regards
    Vijay

  • My Iphone 4 just updated to the iOS6.  I've connected it to my computer for the first time since then, and wanted to back up my photos in iPhoto.  However, although Iphoto recognized my phone, it shows no photos to upload or backup. ??

    My Iphone 4 just updated to the iOS6.  I've connected it to my computer for the first time since then, and wanted to back up my photos in iPhoto.  However, although Iphoto recognized my phone, it shows no photos to upload or backup.  It lists my phone in the "devices" category on the left bar, but no longer shows any of my photos.
    Does anyone have any suggestions?

    I've reread your question several times and am not sure I understand it.
    Are you trying to basically start over, as if you just took your iPhone out of the box?  If so, do:
    Settings > General > Reset > Erase all content and settings

  • Very Very long ping time, only on arch, and preload doesn't work

    Arch is the most amazing Linux system I have ever used. I get like a 30 second boot time from start to finish, i'm just wowed.
    I am using arch64, and have only 2 problems!
    1. I have like a 32ms ping, for any site, toooo big. I have a 3com NIC card which Is currently being used as eth1, and an nvidia network controller on my board eth0. The nvidia controller doesn't work right, so i am using the 3com, with a huge ping time
    2. preload isn't working. I have 3gb of RAM, and AMAZINGLY only 400mb of RAM is being used, with 9 tabs in firefox open, compiz-fusion, gnome desktop. DAMN! I want more RAM being used, what is wrong with this?? (the problem is that things start up a little slow, so it must mean it is not staying in the RAM)
    Please tell me what I can do to fix these problems!
    EDIT: Could it have something to do with the groups I am in, or the preload.conf settings, or the rc.conf file?
    Last edited by savagenator (2008-03-19 23:27:03)

    I saw your latency thingy... though that aint so bad
    PING fk-in-f147.google.com (209.85.129.147) 56(84) bytes of data.
    64 bytes from fk-in-f147.google.com (209.85.129.147): icmp_seq=1 ttl=242 time=146 ms
    Pinging from norway to... wherever that node is.
    and compare that to a norwegian host
    PING www.sau.no (194.63.248.23) 56(84) bytes of data.
    64 bytes from web.domeneshop.no (194.63.248.23): icmp_seq=1 ttl=47 time=86.6 ms
    all in all, you should not be so annoyed unless your used to sub 10 ms ofc.. but this is still very quick for a webhost, atleast i think so.

  • My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

    My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
    Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
    Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
    thanks.
    Sorry my bad Inglês.

    Try a reset hold home/sleep buttons until Apple logo appears
    If that does not improve try a restore
    http://support.apple.com/kb/HT4137
    For your information
    We are NOT Apple here we are all users helping other users
    so emotion is ignored

  • Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

    please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this  should unlock with key and I should do for Please help!. thanks

    Place the iPOd in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • My phone is stuck on apple screen and i've tried to reboot it and connect it to my computer many times but it doesn't work.  Can anybody help me?

    My phone is stuck on apple screen and i've tried to reboot it and connect it to my computer many times but it doesn't work.  Can anybody help me?

    This is covered in the basics section of the manual:
    iPhone User Guide (For iOS 5.0 Software)

  • I have forgotten my password and my iphone is disabled. I have tried to resetting it but every time the time is up and i think it will work it says "can't connect to iphone because password is on" how do reset my iphone 5?

    I have forgotten my password and my iphone is disabled. I have tried resetting it but every time the time is up and I think it will work, it says "cant connect to iphone because password is on" how do i reset my iphone 5?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

    I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
    Anyone had these issues?

    Settings > General > Reset > Reset network settings

Maybe you are looking for