Wage type is not reflected in the infotype

Hi experts,
I have created 3 wage types i.e Basic pay, HRA, and TA and i configured in 'Base Wage Type Valuation'
transaction too. But while creating the infotype 'basic pay', HRA is not reflected in the Amount field.
I have given 50% of Basic pay in the hra field as shown below in the transaction 'Base Wage Type Valuation'.
TARIF 0001 Basic Pay - BHEL 1 2009/01/01 9999/12/31 100.00
PRZNT 0002 HRA - BHEL 2 2009/01/01 9999/12/31 0001 Basic Pay - BHEL 50.00
I request all to guide to solve this issue.
Regards,
Praveen Amirthan.

Hi,
What is maintained in the Indirect Eval. Module and Module Variant for HRA WT in its characteristic.
Change it to INVAL B for the calculation to happen based on percentage of Basic pay as defined by you.
VK

Similar Messages

Data type change made to schema.xml of comments list which is part of blog site template is not reflecting in the existing site but working fine when new site is created.

Hi,
I have created a blog site with the available site template few days back. Now we have the requirement of having the attachments in the body of the comments section.
So, I updated the schema.xml of the comments list available under ../templates/blog/lists/comments/schema.xml to have rich text for the Body field.
With this change, I created a new site and it was working fine. Change is reflected in the new blog site.
However, this particular change is not reflected in the existing blog site. Any changes made to the schema.xml is not effecting the old blog site.
Can anyone suggest what can be done for the change to be reflected in the old blog site?
Thanks in Advance,
Regards, Keerthi Suryadevara

Hi,
According to your post, my understanding is that you wanted to add attachments in the body of the comments section.
You can add the the Code inside the Default list pages. For more information, you can refer to:
Enable Attachment in SharePoint Blog post list and display the list Attachments
In addition, you can add an enhanced rich text field to the comment list and remove the body field. Then you can insert files into comments, too.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/77194/how-to-add-attachments-for-comments-list-in-sharepoint-blog-2010
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Wage Type is not valid for allowance grouping

Gurus
When i am Executing PC00_M40_TERM and entered Details then in very next screen it is with error
''Wage Type is not valid for allowance grouping ''
The Issue is showing generic and No specific Wage type shown in error.
ABAP Team also Debuged and could not get the Issue.
Kindly Let me know from your Experience what could be the Issue.

Your wage type is missing in allowance grouping configuration against RAP indicator R,Reimbursement
Check table V_T7INA9 , check the wage type is configured for the allowance grouping of that employee with RAP Indicator R, Reimbursement

Changes are not reflecting in the Quality

Hi,
These are standard SAP Components. I have imported the ESS and MSS Packages.
Actually 3 Development Components are using in my application (Tra,TraTri and TraTre).Tra is the root DC.
I have made changes to those objects and sucecessfully build without errors.
After check-in all activities those activities are working fine in Development system.
But those changes not refclecting in Quality system. So i was founded build log error in Consolidation.
I was fixed the error in the Development system and build the components without build error.
still now changes are not reflecting in the quality system.
But out of 3 DCs(Tra,TraTri,TraTre) Tra and TraTre are working fine in Quality(changes are reflecting) only problem in TraTri DC (changes are not reflecting in the Quality)..
Please help me as soon as possible....Its very help full for me
Regards
Sudhakar Reddy A

Hi Slava,
very very thanks to you for the fast reply. but one thing in my side.
When i release the activities after successful build, i export those changes and place them in the import queue of the consolidation system in the CMS.
The export in the SAP NetWeaver Developer Studio packs all selected activities into a change request, and then places them in the import queue of the consolidation system.
When the my system administrator imports this request into the consolidation system, the released changes are integrated into the DTR workspace of the consolidation system; the build server compiles the modified components.
my system administrator findout build error in consolidation system:
[wdgen] [Error]   .PersonnelNumberCheck: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   .PersonnelNumberCheck.I_Employeenumber: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.E_Name: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Type: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_No: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Field: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.System: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V1: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V3: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V2: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_Msg_No: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Number: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V4: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Parameter: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Id: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Row: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextValueAttribute EmployeeName [readOnly]: The context attribute has to be read-only. (Hint: As the mapped context attribute is read-only this attribute has to be read-only, too.)
I was fix error in my development system with out any build errors. still now not working ...pls give me any suggestion.i dont have access to consolidation system.
Regards,
Sudhakar

Metadata edited in Bridge is not reflected in the Info Dialogue Box, but shows up in Photoshop.

Metadata edited in Bridge is not reflected in the Info Dialogue Box, but shows up in Photoshop.

Dear Ramón,
You are right that not all metadata is shown in the Finder info but in my case the once added in IPTC core do show as expected for most file types (but not CR2 raw). As you now I convert my CR2 to DNG for a long time now I had to look up the original Raw file and create the data for description, location, keywords again. The data you can add and alter yourself in the IPTC Core field. I added a series of screenshots showing different info and to my surprise (another reason to keep to DNG…) the Raw file had very less info and the xmp shows it all in a rather long and obscure way. Yet PSD, DNG and File info in PS show the same.
Could not recreate the Bridge metadata workspace from the OP because mine (Bridge CC) does not have the description field as an option anymore for some obscure reason. Also checked this in my CS6 version with same result, making the metadata workspace unusable but that was it already for a long time.
Still leaves us with the problem the OP showed, having all info in most files, as in Finder info, but not in Bridge. So could the OP respond to the purge cache for selection option in post 4?
Here are (a bit to many, sorry) my screenshots showing different file info (in Dutch but you will manage with that) and metadata in Bridge:
Finder info for PSD and DNG:
Finder info for CR2 and XMP:
File info Bridge / PSD:
And a Bridge Metadata view:

UI Screen Configs not reflecting on the web

For doing screen configuration, when I click on the frame to configure, the system is picking up std key and not the custom key zpartman though zpartman key is there in the list. ( Note: Zpartman key is the one assigned to this role ). Therefore if I do config in zpartman key, it's not reflecting on the web. Please reply what could be the reason and the solution.
Thanks
TR

Hi TR
first access the standard and check the configuration info such as what is the configuration key , object and subobject .
Then access your custom configuration screen and check what it was looking for and what is it picked , change your custom configuration accordingly what it was looking for (by making changes to configuration key, object and sub object).
Check that you are accessing in the same client if not transport the request to other client using SCC1 transaction.
Thanks & Regards
Raj

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

How to create a new wage type in IT0014 and assign the GL?

Dear Gurus
Please guide me about Creating of new wage Type in 14.
My client wants to add a new wage type says:-1HRR ( Honorarium) & assign the same to Training Expenses GL account and order number. How to do it. Please guide.
Regards
Vikas K Sharma

To copy a standard WT and assign a new name with the same attributes and characterstics:
IMG > Personnel Management> Personnel Administration> Payroll data> Recurring Payments and Deductions. Copy any standard Wage Type.
Check assignment of WT to a Symbolic Account :
(The WT will inherit the Symbolic account from the copeid standard WT)
Go through SM30 to Table V_T52EL_NOFM. Make neccessary changes to the Symbolic account, if needed.
To create a new Symbolic Account and assign it to the WT:
Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the HR-System --> Employee grouping and symbolic accounts --> Define symbolic accounts
To assign the WT to the new symbolic account (same as table V_T52EL_NOFM):
Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the HR-System --> Wage Type Maintenance --> Define WT posting attributes
To assign a symbolic account to a G/L or Check the assignment of Sym Acc to G/L:
Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the AC-System -->Account Assignment --> Assign expense accounts.
Hope this helps.
Soujanya.

Check Box values not reflecting in the pageflow instace variable

Hello BEA Experts,
I am binding a checkBox group to an instance variable of a Pageflow , it seems that the array inside the pageflow is null no matter what can you please let me know why.
Is it possible to bind the checkbox group tag to an array in Pageflow or is there anything wrong with the way I am using the checkbox group with in a data- repeater table.
Here are the code snippets..
JSP:
<netui-data:repeaterItem>
<tr class="tablebody">
<td>
<netui:checkBoxGroup dataSource="{pageFlow.nodeIds}">
<netui:checkBoxOption value="{container.item.nodeId}">&nbsp
</netui:checkBoxOption>
</netui:checkBoxGroup>
Contoller:
Has a private instance varible named nodeIds with getter and setter methods..
Please let me know why the checked values are not reflecting in the pageFlow attribute.

Hi Bob
I didn't understand fully what you are trying here. Could you please clarify?
I assume that you have a Array of NodeId objects.
Lets say:
Public NodeId[] nodeids = new NodeIds[10];
and you want a checkBoxGroup mapped to NodeId[]
and have as many checkBoxOption as number of elements in array with value as NodeId(i).nodeId
Is this assumption correct?
If the above is correct then the code snippet you have pasted is wrong in the sense that checkBoxGroup datasource is the array but the Option value is the main repeater item's nodeId which is wrong.
The container.item would not access anything within the pageflow variable.
I will post a sample in the next one
Vimala-

PO changes not reflecting in the SAP R/3 system in Extended classsic

Hi Guys,
I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the PO there is a line item with some Value and we are trying to delete it and save it, it gets deleted and PO status it shows as awaiting approval. but at the Item level of the PO the check box of Item deletion is updated. which means PO line item is deleted.
Now my querry is the status of the PO in the SRM shows a awaiting approval and this is not in approval tab but at the header level when I try to search the PO with PO display/change option. Also its not reflecting with the deleted item in R/3 system.
Please help me.
Regards
Srujank

Hi
Check configuration of your Message server. check if your message server is configured properly. Just go to your SAP logon. Select the system say "DEV" and click on groups.Then Click on System id and enter the id as "ID1" in your case.
and then enter the machine name in the message server box and then click on generate list. If your message server is configured correctly you would get some groups in the list below. only if that comes then go to SLD and check in the ABap technical system if you have configured technical system using the proper logon groups.
Then you should not face this problem. Let me know if you require more information.
regards
ravi

SAP BI CKF,RKF descrptions are not reflecting in the universe

Dear Gurus,
I have couple of questions
1.I have created a BI quey with 2 calculated keyfigures and 2 Restricted keyfigures. When i am creating a universe on top of the BI query, Desrptions for Calculated and Restricted keyfigures are not reflecting in the universe, Rather the universe is showing UID(unique ID)'s of the CKF and RKF.
To get the descriptions into the universe, Do i need to do any settings?
2. In one of the documents I have read that we have to create one universe for one language if i want to see the report in Multiple languages. if it is so,
Do i need to create universe in each and every language or is there any option that i can create the universe in one language and replicate into the required languages?
Please help.
Thanks and Regards
Jagadeesh Ambati

Hello Jagadeesh,
I recommend to post this query to the [Integration Kits - SAP|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

SAP BI RKF,CKF Descrptions are not reflecting in the universe

Dear Gurus,
I have couple of questions
1.I have created a BI quey with 2 calculated keyfigures and 2 Restricted keyfigures. When i am creating a universe on top of the BI query, Desrptions for Calculated and Restricted keyfigures are not reflecting in the universe, Rather the universe is showing UID(unique ID)'s of the CKF and RKF.
To get the descriptions into the universe, Do i need to do any settings?
2. In one of the documents I have read that we have to create one universe for one language if i want to see the report in Multiple languages. if it is so,
Do i need to create universe in each and every language or is there any option that i can create the universe in one language and replicate into the required languages?
Please help.
Thanks and Regards
Jagadeesh Ambati

Hi ingo,
do you see the desriptions in items like the RSA1 ? - I can able to see the descrptions of Calculated keyfigure and Restricted keyfigure in the query designer and as well as in Bex analyzer.
did you use the same language when building the universe connection ? - Yes I have created the connection and universe in English Language.
Thanks and Regards
Jagadeesh Ambati

Changes are not reflecting in the page

Hi All,
I have an issue in custom page. In my custom page, if i click approve button for a particular batch, then it will navigate to previous page which contains 10 batches per page in the table structure.
Once i clicked the Approve button it will update the status in the table. It is getting updated in the table but it is not reflecting on the Batches page while navigating to previous page.
Kindly share your suggestions.
Thanks and Regards,
Myvizhi

Hi Myvizhi ,
Since you wish to display a specific row in the table region , then while navigating from update page to search page send primary key and set it as
where clause , so that you can view only updated specific row .
You need to handle this in process Request of your controller class in search page . Let me know if its not clear .
--Keerthi

Changes to subtasks are not reflected in the summary task

I use Project Professional 2013.
Changes to subtasks are not reflected in the summary tasks. This includes both work and actual work as well as % complete. The tasks are all auto scheduled. Is there a setting that I need to change?

The only way I know to make that happen is if calculate project after every edit is disabled (See Options, Schedule tab).
Does this happen in all project files, for other PCs near you and do you have SP1 installed for Project 2013?
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Query changes are not reflecting in the Workbook.

Hi All,
I have modified the query by adding attributes. But the changes are not reflecting in the workbook.
Do i need to insert the query again in the workbook or is there any option that will reflect the changes in the workbook
Thanks in Advance,
Suneel.

Hello Suneel,
if you insert the query again, it will work, but it is not the best way to delegate the query changes to the workbook.
Just open your query from within your workbook (BEx menu 'change global definition') and use the green button at the top left in order to transfer the new query structure to the workbook. The query will be executed and you should see the changes.
Don't forget to save the workbook afterwards.
Regards,
Kirill

Wage type is not reflected in the infotype

Similar Messages

Maybe you are looking for