Wagetypes used in Travel Management for Country grouping 40 (India)

Dear Consultants,
May I know which model wagetypes are to be used for Travel management for country grouping 40 (India). For Country Grouping 10 (US) we have MJ10 to MJ95. I created some wagetypes & set their characteristics similar to those in MJ10 to M95 but it does not work well.
Is there any simple process to go from Wagetypes > symbolic accounts > GL Accounts.
Regards,
Bindumadhav

That's my guess, as it worked for me:
It doesn't compile, because there's a bug in the structure of the PNP logical database.
Payroll result structure specific to your country is not listed as a 'possible type' for LDB node 'Payroll'.
You can correct it easily in tracaction SE36. Choose PNP, tab: 'Structure'.
Double-click on 'PAYROLL'. Click on 'Possible types'.
Add country-specific structure (PAYIN_RESULT).
Tell me what happened
PS. Be aware that this is a modification to the system and you need a key for this object.
Message was edited by: Jacek Wojciechowski

Similar Messages

'No assignment of payroll data to BW month for country grouping 99'

hi gurus,
i am getting the error 'No assignment of payroll data to BW month for country grouping 99'
to solve this i went to
SBIW>Settings for Application-Specific DataSources (PI)->Human Resources->Payroll Plug-In>Assignment of Payroll Data to BW Month
i am choosing country 99 and here i get 4 options which should i choose.
1.payment date of for- period
2.end date of in -period
3payment dare of for -period
4payment dare of in- period
regards
man

Hi,
As per the settings in the SBIW code in R/3 , we can go with a single Time based assignment for a Country at a time.So we can not use both IN Period and FOR period for the same country code.
For more information, refer the below path.
SBIW>Settings for Application-Specific DataSources (PI)->Human Resources->Payroll Plug-In>Assignment of Payroll Data to BW Month
Under human resources.....go to payroll and assignment of payroll data to BW
if you do not get...use Cntl + F and enter payroll..
you will get
in Assignment of payroll data to BW Month, after giving country grouping, what type of period assignment should be given. in R/3 dev side when i have chosen
1.End of For period, extracted 972 records
2. End of In period, extracted 1023 records
3. Payment date of For period, extracted 972 records(just the same as in the first option)
4.Payment date of In period, extracted 0 records
Do u know more about these options??? one more thing to clarify on this. While doing payroll data extraction, do we have consider or say give "Define time frame for transfer", if that is compulsory then i have done that by givigng
Earliest date as 01.01.2005
Latest date as 31.12.2005
but in the info package selection i have given to extract 01.01.2005 to 28.02.2006 and it has extracted successfully even 2006 records which means that though we define time frame, extraction is independent of this time frame, am i correct???
Hareesh

Using If condition in For EACH Group

Hi all,
I want to use if condition in for-each-group. Basically my requirement is that i want to use dynamic grouping. There will be two groups and the upper group and lower group will be selected on the basis of a report parameter.
I hope i made it clear enough. So please help me in this. Any ideas will be highly appreciable.
Thanks and regards
Naveed

You can add a If condition filed after the for-each field
for EG : <?if:ADDRESS_TYPE = 'Employee Address'?>
and then add anothet field which has <?end if?>
Hope this helps.
Thanks,

Could you please tell what is encryption mechanism used in Release Management for storing any password

Could you please tell what is encryption mechanism used in Release Management for storing any password

Hi y e ll e sh,
I am trying to involve someone to further look at your question. There might be some time delay. You can also check replies for the similar question in this
thread. Appreciate your patience and thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem with HRFORM for country grouping 40.

Hello Everybody,
I have created HR Form ZSAP_PAYSLIP_IN for India (Country Grouping = 40 ) copied from standard HR form SAP_PAYSLIP (for Country Grouping 99). The DDIC structure /1PYXXFO/ZSAP_PAYSLIP_IN and the smartform ZPYXXFO_ZSAP_PAYSLIP_IN are generated succefully and both are activated. But while trying to generate the HR form I am getting the following error "Generated print program contains a syntax error". In the program /1PYXXFO/ZSAP_PAYSLIP_IN_PRNT its giving error in this line
NODES: PAYROLL TYPE PAYIN_RESULT.
Please help.
Thanks in advance.
Debasis

That's my guess, as it worked for me:
It doesn't compile, because there's a bug in the structure of the PNP logical database.
Payroll result structure specific to your country is not listed as a 'possible type' for LDB node 'Payroll'.
You can correct it easily in tracaction SE36. Choose PNP, tab: 'Structure'.
Double-click on 'PAYROLL'. Click on 'Possible types'.
Add country-specific structure (PAYIN_RESULT).
Tell me what happened
PS. Be aware that this is a modification to the system and you need a key for this object.
Message was edited by: Jacek Wojciechowski

No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13

Hi Gurus,
I get the error "No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13" when extracting data for 0PY_C02. I then added the "End Date of For Period" in the SBIW in the Payroll systen activity "Assignment of Payroll Data to BW Month". I am still getting the same error???
Also I do have data in the cube from that extraction, but when I run a query I get no data?? Is this due to the above error?
Thanks,
Garth

Hi,
The extractor runs without errors in RSA3 in the source system. The error is red with the test of "No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13". I completed the SBIW task to set this in the source system but I still get the same error?
Any other ideas?
Thanks,
Garth

Can i use nokia video manager for converting video...

Can i use nokia video manager for converting videos will this support n79

Only be aware that Nokia video tools only work for videos that are not longer than 35 minutes.
Also the quality is not very good, you can get better results from other encoders.
Lastly they are Really slow compared to other tools available.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Is using a travel router for wifi as easy as plugging it in?

Is using a travel router for wifi use on iPad as easy as plugging it in?

Your question is not very clear but I assume you are talking about turning a wired hotel internet connection into WiFi that you can access with your iPad. If this is the case, and you have already set up the WiFi connection 0 meaning you can already connect to it with the iPad - then yes. You would plug the wired Internet into the WAN port of the router and power it up. You iPad should see it and be able to connect.
You may still need to log in to access anything other than the Hotel's landing page if they have one.

Personal Data and Address for Country Grouping 99 - error on ESS

Hello All,
I have configured personal data and address infotypes in ESS for the country grouping 99.
I have done the following config
1. Assign Screen Structure to Infotype Versions
2. Define Active Subtypes and Use Case
3. Define Country-Specific Applications
4. Created a Z service and then assigned this service to subarea.
I made use of US service and copied to z.
after the config when i log on to the portal and check the personal data or address links am getting the error:
An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
the st22 dump is
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
I searched in the forum but still am unable to figure it out where i am wrong or missing any config or any other technical error.
Can any one pls help me

http://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99
check the steps in above link
and also please check with some standard country like india 40 or usa 10 what use cases and time constraints have been set
INFTY - Now specifies the infotype.
USECASE - Corresponds to the value in the table V_T7XSSPERSUBTYP.
ZEITB - Corresponds to the value in the table V_T591A (V_T582A).
Page 2
SUBTYPE_TAB - Here, you will find a list of the subtypes that have
already been checked and that are correct.
You then find the subtype in METADATA-SUBTY. However, you must move up
one subroutine in the call hierarchy in advance to do this.
This data makes it easy for you to identify the infotype and the subtype
and correct the inconsistency by making entries in the tables mentioned.
ie
T_cd:SE24 >>CL_HRPA_PERNR_INFTY_XSS >> CHECK_USECASE_WITH_CONSTRAINT >>
for
usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
you need to have
zeitb = '1' OR zeitb = '2' (table V_T591A)
for
usecase = A2, A3, A5, B2, B3, B5
you need to have
zeitb = '2'
for
usecase = A6, B3
you need to have
Zeitb = '3'

Where used in web templates for parameter groups

Does SAP deliver any where used functionality for parameter groups? I need a report or function that can take as input a parameter group (fully qualified) and deliver back all the web layouts and planning folders that the parameter group (or for that matter global planning sequence) is used.
I can find the XML of the web templates but that is a bear to parse and have not found the tables that show the details of planning folders (if any).

Hello Corwin,
we don't have a where-used functionality but in SAP NetWeaver 2004s you can use programs UPC_CUSTOMIZING (for BPS0), UPB_CUSTOMIZING (for folders) and UPWB_CUSTOMIZING (for web interfaces) to display and search through the configuration. It's one folder or web interface at a time but it's certainly quicker than doing it manually.
Regards,
Marc
SAP NetWeaver RIG

Using JDBC Persistent Manager for Tomcat across multiple Servers

Sorry if I word this question incorrectly, but I hope you can get the gist of it. Basically, I have a web application that will be running on 2 different machines. When too many users are on one machine, they are switched over to another machine (load balancing). If I use JDBC (or file) Persistance Manager to store sessions, what happens when a user is switched between machines? If both machines use the same settings for the Persistance Manager, when a user has just been moved to a new machine, will it be able to load the session from the DB? (since it should have its sessionID). If you can not do this, is there a way to do it?
Thanks!

Sorry if I word this question incorrectly, but I hope
you can get the gist of it. Basically, I have a web
application that will be running on 2 different
machines. When too many users are on one machine,
they are switched over to another machine (load
balancing). If I use JDBC (or file) Persistance
Manager to store sessions, what happens when a user is
switched between machines? If both machines use the
same settings for the Persistance Manager, when a user
has just been moved to a new machine, will it be able
to load the session from the DB? (since it should
have its sessionID). If you can not do this, is
there a way to do it?
Thanks!Session ids are unique and cannot be transferred between different servers... Wise web servers supports load balancing and should be able to transfer/store session without your special code. If you still keen to write transfer code yourself you have to:
1) Store not only session id, but also all content of session (including some virtual (your) session id
2) Transfer (i.e. create a copy) stored session content to another machine
Paul

Using central Solution Manager for monitoring multiple customers

Hello,
We are working on monitoring SAP systems of several customers. For every customer we have configured central monitoring on Solution Manager system of that customer. All satellite systems are added to RZ21 and CCMS agents are configured correctly. On the Solution Manager, in RZ20 we have created a rule based monitor specific to the needs of customer, and that monitor is used for the whole landscape of every customer.
But now I need to configure our central Solution Manager system which will collect CCMS data from all satellite systems of all customers on one place in RZ20. That central Solution Manager system should have direct connection only to customer Solution Manager systems and not to their satellite systems. Is this possible? If yes, can you please explain me how to do it or point me to documentation? I was unable to find solution.
To make this more clear I made a picture of desired configuration:
https://picasaweb.google.com/108686894540363563900/SAP#slideshow/5571983242527848482
Edited by: Dejan Terzic on Feb 10, 2011 10:04 AM

Hi Dejan,
as far as I know this is not possible.
we had similar issues, every time we migrated a new customer to or datacenter. Our solution was, to register the CCMS agents to two systems for a period of migration.
Sometime ago, I found a question for that an SDN:
Using another CEN for Solution Manager
I know, that this is not your question exactly, but it is the right direction...
Kind regards

Configuration Solution Manager - Travel Management for Route Cause Analisys

Hi,
Can you describe how to configure Solution Manager to monitor (RCA-E2E) our Travel System (SAP Enterprise Portal + SAP HR)?
Best regards,
Diego.

Hi,
RCA configuration remain same for all the module/component
All the steps are there in RCA Configuration thread
SPRO>SAP SOlutionManager Implementation Guide> SAP Solution Manager>Basic settings> Root Cause analysis
here you can find all the information regarding setup, please follow one after the other.
Regards,
Shyam.

Configuration of APEX applications to use Oracle Access Manager for Login

Is there Oracle documentation on configuring an APEX application to accept a login id passed by Oracle Access Manager? Would someone please help with some instructions on how to do it. Thanks.

Hi Ravi,
this looks like a WLS issue.
1-You can try as a workaround to remove this validator configuration in taglib definition file: .tld and see the behavior.
2-Or you are missing something into url.
I hope this helps,
Thiago Leoncio.

Can I use iPhoto library manager for deleting duplicate photos?

I would like to find a way to delete hundreds of duplicate photos that exist in my iPhoto library. Any ideas?

to your headline - yes
but the bigger question is why do you have duplicates? what recently chnaged that you have them?
LN

Wagetypes used in Travel Management for Country grouping 40 (India)

Similar Messages

Maybe you are looking for