Wahoo

Since running the latest Apple security and software updates for my iPhone 4 S, my ANT+ Wahoo dongle keeps displaying an error message on screen saying this accessory is not supported by iPhone. I also have the same problem with my audio docking system in my car. These devices worked fine until I updated iTunes my iPhone this week. Does anyone have any information on how I can get round this problem. As they were both very expensive applications and I'd like to continue using them. The apps that run these accessories are downloaded from iTunes and therefore I'm surprised they stopped working. The Apple I use for theWahoo is called live cycle. The audio input is part of my mini Cooper S.

Glad you got the problem sorted, thanks for getting back to the forum.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Similar Messages

  • Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

    Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

    IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

  • IPod 4 and Wahoo, compatible?

    I purchased a Wahoo Fitness Blue HR in San Francisco at the Apple store to go with my ipod touch 4th generation. The clerk told me they were compatible but once I get home, I cannot get them to pair. Are they compatible?

    Sorry, it is not compatible. It says on the web-site. It is only compatible with the iPod Touch 5, iPhone 4s and 5, iPad 3, 4 and Mini.
    You should get a refund, it is not cheap.
    http://store.apple.com/au/product/H8296VC/B/wahoo-fitness-blue-hr-heart-rate-mon itor

  • Wahoo ANT - Accessory Not Supported by iPhone

    I try to connect a Wahoo ANT+ Fitness device, model AP201, to my iPhone 4 with IOS 5.1. I get the error message "This Accessory is Not Supported by iPhone". My wife has the same iPhone and the same IOS version and the accessory is working 100 % correctly with her iPhone. I have tried the following: Reset device in iTunes, Restored backup from iTunes, Reset all setting; however, the same message appears on my device. I have also tried to remove lint etc. from the connector contacts. Any ideas what to do next?
    Message was edited by: toreboes

    This does not help you, but i would like to mention that I have the exact same problem with my AP201 model (iOS5.1.1).
    - Connector is clean (very clean).
    - IPHONE 3GS en IPAD2 are working correctly, and 4 different iphone4 models do not work....
    I hope Wahoo or Apple has a solution to this problem.

  • Connecting a 5S to wahoo fitness blue HR

    Does anyone know any solutions to getting the mentioned heart rate monitor to connect to a 5S , I initially bought one yesterday and after not being able to connect to it instore , I returned it.
    I moistened the sensors and had it on while trying to connect.

    Hi,
    Did you use one of the supported Apps like the Wahoo Fitness App to try and connect?  It uses BT40 which does not interact with the Bluetooth menu in the Settings App.  It should connect directly to any of the Apps that support it.  If you try to connect it from the Bluetooth menu in the Settings App it will not appear.

  • LGSR - TX WAHOO: FTCAM PRTY error

    Hi guys,
    I have a cisco 12416/PRP with 12.0(32)SY12 image.
    Today i saw that message on the logs:
    SLOT 9:Jun 17 03:40:35.727:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 17 05:10:41.711:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 17 11:01:59.863:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 17 15:29:34.236:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 17 19:14:47.226:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 18 00:12:08.489:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 18 03:09:44.879:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 18 08:43:50.048:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 18 13:24:24.701:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 18 16:31:47.632:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 18 20:23:11.412:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 19 00:00:38.930:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 19 04:47:35.889:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 19 11:22:53.468:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 19 15:09:59.673:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 19 18:55:59.779:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    SLOT 9:Jun 19 21:39:30.546:   TX WAHOO: FTCAM PRTY error dev_id = 6, parity = 10601082, cell_offset = 0x0001C27A
    Can you help me, please?
    Thank you

    i have a 12816 has same problem. does your problem solved ?
    FRU:  Linecard/Module: 12000-SIP-601=
            Processor Memory: MEM-LC5-2048=(Non-Replaceable)
            Packet Memory: MEM-LC5-PKT-512=(Non-Replaceable)
      L3 Engine: 5 - ISE 10 Gbps
    SLOT 11:Mar 11 10:40:16.484 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510351, cell_offset = 0x0000600F
    SLOT 11:Mar 11 10:40:16.508 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510355, cell_offset = 0x00006013
    SLOT 11:Mar 11 10:40:16.532 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510355, cell_offset = 0x00006013
    SLOT 11:Mar 11 10:40:16.556 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510355, cell_offset = 0x00006013
    SLOT 11:Mar 11 10:40:17.428 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510367, cell_offset = 0x0000601F
    SLOT 11:Mar 11 10:40:17.452 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510367, cell_offset = 0x0000601F
    SLOT 11:Mar 11 10:40:17.476 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 14704663, cell_offset = 0x00006017
    FRU:  Linecard/Module: 12000-SIP-601=
            Processor Memory: MEM-LC5-2048=(Non-Replaceable)
            Packet Memory: MEM-LC5-PKT-512=(Non-Replaceable)
      L3 Engine: 5 - ISE 10 Gbps
    SLOT 11:Mar 11 10:40:16.484 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510351, cell_offset = 0x0000600F
    SLOT 11:Mar 11 10:40:16.508 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510355, cell_offset = 0x00006013
    SLOT 11:Mar 11 10:40:16.532 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510355, cell_offset = 0x00006013
    SLOT 11:Mar 11 10:40:16.556 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510355, cell_offset = 0x00006013
    SLOT 11:Mar 11 10:40:17.428 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510367, cell_offset = 0x0000601F
    SLOT 11:Mar 11 10:40:17.452 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 10510367, cell_offset = 0x0000601F
    SLOT 11:Mar 11 10:40:17.476 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 1, parity = 14704663, cell_offset = 0x00006017

  • Wahoo ANT  in iPhone 4S rarely sensors my heartbeat

    I have been using Wahoo for several years with my iPhone 3GS firstly using RunKeeper, and now Endomondo.
    The Wahoo equipment worked fine until I connected to the new iPhone 4S.
    I have only had the heart be measured once when sitting on a chair.
    I have tried twice whilst doing my sport and again on a chair, but no reading.
    Please advise how I can make the Wahoo work.

    I received a response from Wahoo, which helped me check with the Wahoo Utility app.
    The Wahoo Utility app measured my heart straight away.
    Therefore, the issues seems to be with the Endomondo app.
    However Endomondo worked with my iPhone 3GS, but only sometimes with my new iPhone 4S.
    So, can Endomondo or Apple fix this, or can someone recommend a good app that works with the iPhone 4S and Wahoo please?

  • Wahoo Fitness Blue HR

    Can I use the Wahoo Fitness Blue HR while playing basketball or tennis leaving my Iphone 5 in my bag next to the court?

    Hi,
    Did you use one of the supported Apps like the Wahoo Fitness App to try and connect?  It uses BT40 which does not interact with the Bluetooth menu in the Settings App.  It should connect directly to any of the Apps that support it.  If you try to connect it from the Bluetooth menu in the Settings App it will not appear.

  • Wahoo fitness app ipod nano 7th generation

    Will the iPod Nano work with the Wahoo tckrx and the Wahoo fitness app?
    Thank you

    Thank you for using the Apple Support Communities
    Since the iPod Nano does not run iOS it will not be able to install any 3rd party applications.
    -Zeph

  • Tracking number wahoo!

    got a tracking number for my iPhone 6 gold 16gb!!! hope everyone else gets one soon as well!

    What time did you order it EST that day?

  • Wahoo Macy's CLI

    So after many months...I finally got a CLI from Macy's.  Went from $600 to $1,000. I asked for $1,500 and they countered with $1,000. I'll take it! Wanted to ask about the furniture account before it goes away but decided not to since they couldnt give me the CLI i asked for on the regular card...figured it would be a no...I'll take anything right now to avoid apping for new cards! Happy 4th everyone!

    BackOnTrack2014 wrote:
    It is? Hmmm...I may do that. I got the CLI using chat, can I inquire on the club acct using chat too? The only reason I didn't at first was since I was countered with the CLI , I didn't think I'd be approved for anything else...hmm maybe worth a shot?You'll get it. My Macy's store card CL is only $1000 and I was approved. They will counter for the other accounts too.

  • Wahoo!! MSI P6N :)

    At exactly 12:01 AM this morning I pressed "Power" and was greeted with the most beautiful hum and whir I think I've ever heard . 
    She works!  OCZ Platinum Rev 2 DDR2 800 running in dual channel out of green #1, orange #2 slots at 1.9V 5-5-5-15!!!!  This RAM is spec to run at 4-4-4-15, so I'll make that change in BIOS tonight.  I believe it won't need any more voltage either, based on the succes I had out of the orange at 4-4-4-15 with the first board. 
    Still have to go through all the testing - MemTest, Orthos, etc.  But hot damn its looking really good.  If you remember the OCZ would not post from my first P6N mobo's green slots.  Sure looks like it was a fluke.  I may have zapped something, it being my first build and all.  Yeeha!!!
    Thanks for the support and positive vibes .

    Glad that you've got your system up and running .

  • Wahoo!! Links work in 2.0!

    For all of you out there wondering: yes, links in Pages 2.0 are live. Click on 'em in your exported PDF and a browser will respond! Tested it today myself.
    Unfortunately, there doesn't seem to be a table of figures, though. But the reviewing feature is welcome.
    -Andre'

    Thanks for this info! That was the one feature I hoped for in a Pages update (the others are all very cool, welcome additions, by the way). I will probably upgrade just for this feature.
    Dual-processor G4, 1GHz    

  • New Photosmart Plus B209 a-m Will not connect wirelessly **HELP**

    I just purchased this printer and i have tried every option I can think of and find online to get this printer to connect to my netgear router, I had a wireless canon printer that i had for a  while that quit so i went and bought this printer and now it wont connect i've never had this much trouble my canon connected right away. I changed my router settings and hit my WPS button for this printer and still nothing. When i click on the wireless option on the touchscreen menu on the printer it just says "No connection found" and the option on the solution center for USB to Wireless just runs and runs for hours. Any ideas?  Thanks a bunch in advance!!

    Hi- Cliff here.
    I have the exact same printer. After I installed the software from the CD that came with the printer, I used the Wireless setup tab to configure my connection. You need to know about your network. Things like WEP, and most importantly- select the shared key if you use a 64 bit or 128 bit encryption. Mine would not work until I fixed the setup on the printer side of the wireless configuration. Type in your key (or passphrase) that's the same one you'd use on your laptop or desktop that is on the wireless network. Unless you have to- leave the settings to automatic on discovery of the IP address and DNS servers. You usually don't have to mess around with those on a home network. Make sure the printer is connected to the computer that you've installed the HP software on- with the USB cable when you start this process so the software can communicate with the printer. I used the "wizard" and after about 6 or 8 steps, I was able to remove the USB cable and put the printer downstairs. Then I simply used the Windows Vista "Add Device" for a printer on my network and Wahoo!!
    I hope that helps. If not, write back to me and we can do a more detailed step by step overview.
    I must say, once you get it all set up- it's a great printer and VERY inexpensive to operate. Ink is cheap and this printer is very fast over my network. I use my ACER Netbook all over the house and print from the garage and the front yard and the living room and even inside my RV!!
    We will get it working.... Together....you are not alone in this.
    Cliff Van Ness
    Spokane, WA
    What's the KUDOS thing for, I've seen other people mention it.
    I'm new to the HP Website.
    Thank you,
    Peace and Safe Journeys

  • Trying to connect 2 mac mini's as a network, and sharing printers

    Hello to all. Please help me as I'm a newbie on these Mac mini's. I am trying to create a network between the two mini's and I would like to share files between them and be able to print from the upstairs mini to the printers hooked up to the downstairs mini.
    Mini 1 (downstairs) has 2 printers attached directly, a HP color laserjet and a Epson 800 Artisan
    Mini 2 (upstairs)
    Mini 1 and mini 2 are both connected via ethernet to the Netgear router.
    Here is my problem:
    on the mini 1, I can print and even access the mini 2 via sharing. I can screen share and view folders that is on the mini 2.
    However, from the mini 2 computer, I cannot get the screen share and folder sharing from the mini 1 computer. I show that it is there, but when I try to connect, I get a message that states: CONNECTION FAILED The server may no exist or it is not operation at this time. Check the server name or ip address and your network connection and try again.
    On the mini 2 I also cannot get anything to print. It doesn't even show that the printers that are supposedly shared at the other computer are present. I tried to add them, via default icon or even ip from the print and fax preferences, but I get error messages and cannot print.
    ON THE mini 2: When I used the 'default printer' icon, both of my printers showed up using bonjour shared and I 'added' them. But when I tried to print, I got a message stating:
    *Connecting to downstairs-mac-mini.local on port 631...*
    *Unable to connect to printer; will retry in 30 seconds....*
    I deleted both printers as bonjour shared and tried to make the printers an ip internet shared, and put in the ip address xxx.xxx.1.2 (mini 1 ip address) but I got a message saying that that ip address was being used. I changed the ip address to xxx.xxx.1.5 (mini 2 ip address) and it looked like it was going to print, but it automatically goes to pause. (doesn't matter which printer it is, I can't print from either. I never did get either of the printers to work on mini 2.
    I have done the following: On the mini 1, the printers are marked shared. On both computers the shared folders are marked shared, along with screen sharing. I also added all files on both computers to be shared as to who can read only or read and write.
    Also, I have also gone to the 'system' icon and on internet sharing, I have made both computers to be shared, with the appropriate check marks done on the list of services I want shared.
    ON both the mini 1 and mini 2 I have set the network to XXXXX Home and it automatically configured and states that my ethernet is connected.
    On the downstairs computer, I can see the 'shared computer, and am able to access the files.
    BUT on the other computer upstairs, I do see the downstairs computer, but it fails in the connection.
    I noticed that the ip address for each computers state the same number, except the last digit is different. xxx.xxx.1.2 for the downstairs mini and xxx.xxx.1.5 for the upstairs mini. The router number and dns server along with the subnet mask are the same numbers between both of the computers.
    I am going to set the power settings NOT to sleep when idle so that might help when I am trying to view files on each mini's.
    So right now I am stuck with how to make the upstairs mini to print on the downstairs printers, and how to see the downstairs mini on the upstairs mini display.
    Any help from anyone is very much appreciated. Sorry this is so long. Thanks in advance!

    Mini 1 Allow only essential services
    Mini 2 Allow all incoming connections
    I changed mini 1 to allow all incoming connections
    That did the trick for viewing, now will that help me on my printer issue also? YES! wahoo! Thanks so much, I would have not thought about checking the firewall.
    Kudos to you and all your help!

Maybe you are looking for